Total
33104 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-21765 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU protection in ip6_default_advmss() ip6_default_advmss() needs rcu protection to make sure the net structure it reads does not disappear. | |||||
| CVE-2025-21738 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-sff: Ensure that we cannot write outside the allocated buffer reveliofuzzing reported that a SCSI_IOCTL_SEND_COMMAND ioctl with out_len set to 0xd42, SCSI command set to ATA_16 PASS-THROUGH, ATA command set to ATA_NOP, and protocol set to ATA_PROT_PIO, can cause ata_pio_sector() to write outside the allocated buffer, overwriting random memory. While a ATA device is supposed to abort a ATA_NOP command, there does seem to be a bug either in libata-sff or QEMU, where either this status is not set, or the status is cleared before read by ata_sff_hsm_move(). Anyway, that is most likely a separate bug. Looking at __atapi_pio_bytes(), it already has a safety check to ensure that __atapi_pio_bytes() cannot write outside the allocated buffer. Add a similar check to ata_pio_sector(), such that also ata_pio_sector() cannot write outside the allocated buffer. | |||||
| CVE-2025-21733 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Fix resetting of tracepoints If a timerlat tracer is started with the osnoise option OSNOISE_WORKLOAD disabled, but then that option is enabled and timerlat is removed, the tracepoints that were enabled on timerlat registration do not get disabled. If the option is disabled again and timelat is started, then it triggers a warning in the tracepoint code due to registering the tracepoint again without ever disabling it. Do not use the same user space defined options to know to disable the tracepoints when timerlat is removed. Instead, set a global flag when it is enabled and use that flag to know to disable the events. ~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options ~# echo timerlat > /sys/kernel/tracing/current_tracer ~# echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options ~# echo nop > /sys/kernel/tracing/current_tracer ~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options ~# echo timerlat > /sys/kernel/tracing/current_tracer Triggers: ------------[ cut here ]------------ WARNING: CPU: 6 PID: 1337 at kernel/tracepoint.c:294 tracepoint_add_func+0x3b6/0x3f0 Modules linked in: CPU: 6 UID: 0 PID: 1337 Comm: rtla Not tainted 6.13.0-rc4-test-00018-ga867c441128e-dirty #73 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:tracepoint_add_func+0x3b6/0x3f0 Code: 48 8b 53 28 48 8b 73 20 4c 89 04 24 e8 23 59 11 00 4c 8b 04 24 e9 36 fe ff ff 0f 0b b8 ea ff ff ff 45 84 e4 0f 84 68 fe ff ff <0f> 0b e9 61 fe ff ff 48 8b 7b 18 48 85 ff 0f 84 4f ff ff ff 49 8b RSP: 0018:ffffb9b003a87ca0 EFLAGS: 00010202 RAX: 00000000ffffffef RBX: ffffffff92f30860 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9bf59e91ccd0 RDI: ffffffff913b6410 RBP: 000000000000000a R08: 00000000000005c7 R09: 0000000000000002 R10: ffffb9b003a87ce0 R11: 0000000000000002 R12: 0000000000000001 R13: ffffb9b003a87ce0 R14: ffffffffffffffef R15: 0000000000000008 FS: 00007fce81209240(0000) GS:ffff9bf6fdd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e99b728000 CR3: 00000001277c0002 CR4: 0000000000172ef0 Call Trace: <TASK> ? __warn.cold+0xb7/0x14d ? tracepoint_add_func+0x3b6/0x3f0 ? report_bug+0xea/0x170 ? handle_bug+0x58/0x90 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __pfx_trace_sched_migrate_callback+0x10/0x10 ? tracepoint_add_func+0x3b6/0x3f0 ? __pfx_trace_sched_migrate_callback+0x10/0x10 ? __pfx_trace_sched_migrate_callback+0x10/0x10 tracepoint_probe_register+0x78/0xb0 ? __pfx_trace_sched_migrate_callback+0x10/0x10 osnoise_workload_start+0x2b5/0x370 timerlat_tracer_init+0x76/0x1b0 tracing_set_tracer+0x244/0x400 tracing_set_trace_write+0xa0/0xe0 vfs_write+0xfc/0x570 ? do_sys_openat2+0x9c/0xe0 ksys_write+0x72/0xf0 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2025-21795 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: fix hang in nfsd4_shutdown_callback If nfs4_client is in courtesy state then there is no point to send the callback. This causes nfsd4_shutdown_callback to hang since cl_cb_inflight is not 0. This hang lasts about 15 minutes until TCP notifies NFSD that the connection was dropped. This patch modifies nfsd4_run_cb_work to skip the RPC call if nfs4_client is in courtesy state. | |||||
| CVE-2025-21784 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: bail out when failed to load fw in psp_init_cap_microcode() In function psp_init_cap_microcode(), it should bail out when failed to load firmware, otherwise it may cause invalid memory access. | |||||
| CVE-2025-21781 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix panic during interface removal Reference counting is used to ensure that batadv_hardif_neigh_node and batadv_hard_iface are not freed before/during batadv_v_elp_throughput_metric_update work is finished. But there isn't a guarantee that the hard if will remain associated with a soft interface up until the work is finished. This fixes a crash triggered by reboot that looks like this: Call trace: batadv_v_mesh_free+0xd0/0x4dc [batman_adv] batadv_v_elp_throughput_metric_update+0x1c/0xa4 process_one_work+0x178/0x398 worker_thread+0x2e8/0x4d0 kthread+0xd8/0xdc ret_from_fork+0x10/0x20 (the batadv_v_mesh_free call is misleading, and does not actually happen) I was able to make the issue happen more reliably by changing hardif_neigh->bat_v.metric_work work to be delayed work. This allowed me to track down and confirm the fix. [sven@narfation.org: prevent entering batadv_v_elp_get_throughput without soft_iface] | |||||
| CVE-2025-21778 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Do not allow mmap() of persistent ring buffer When trying to mmap a trace instance buffer that is attached to reserve_mem, it would crash: BUG: unable to handle page fault for address: ffffe97bd00025c8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 2862f3067 P4D 2862f3067 PUD 0 Oops: Oops: 0000 [#1] PREEMPT_RT SMP PTI CPU: 4 UID: 0 PID: 981 Comm: mmap-rb Not tainted 6.14.0-rc2-test-00003-g7f1a5e3fbf9e-dirty #233 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:validate_page_before_insert+0x5/0xb0 Code: e2 01 89 d0 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 <48> 8b 46 08 a8 01 75 67 66 90 48 89 f0 8b 50 34 85 d2 74 76 48 89 RSP: 0018:ffffb148c2f3f968 EFLAGS: 00010246 RAX: ffff9fa5d3322000 RBX: ffff9fa5ccff9c08 RCX: 00000000b879ed29 RDX: ffffe97bd00025c0 RSI: ffffe97bd00025c0 RDI: ffff9fa5ccff9c08 RBP: ffffb148c2f3f9f0 R08: 0000000000000004 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000200 R12: 0000000000000000 R13: 00007f16a18d5000 R14: ffff9fa5c48db6a8 R15: 0000000000000000 FS: 00007f16a1b54740(0000) GS:ffff9fa73df00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffe97bd00025c8 CR3: 00000001048c6006 CR4: 0000000000172ef0 Call Trace: <TASK> ? __die_body.cold+0x19/0x1f ? __die+0x2e/0x40 ? page_fault_oops+0x157/0x2b0 ? search_module_extables+0x53/0x80 ? validate_page_before_insert+0x5/0xb0 ? kernelmode_fixup_or_oops.isra.0+0x5f/0x70 ? __bad_area_nosemaphore+0x16e/0x1b0 ? bad_area_nosemaphore+0x16/0x20 ? do_kern_addr_fault+0x77/0x90 ? exc_page_fault+0x22b/0x230 ? asm_exc_page_fault+0x2b/0x30 ? validate_page_before_insert+0x5/0xb0 ? vm_insert_pages+0x151/0x400 __rb_map_vma+0x21f/0x3f0 ring_buffer_map+0x21b/0x2f0 tracing_buffers_mmap+0x70/0xd0 __mmap_region+0x6f0/0xbd0 mmap_region+0x7f/0x130 do_mmap+0x475/0x610 vm_mmap_pgoff+0xf2/0x1d0 ksys_mmap_pgoff+0x166/0x200 __x64_sys_mmap+0x37/0x50 x64_sys_call+0x1670/0x1d70 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The reason was that the code that maps the ring buffer pages to user space has: page = virt_to_page((void *)cpu_buffer->subbuf_ids[s]); And uses that in: vm_insert_pages(vma, vma->vm_start, pages, &nr_pages); But virt_to_page() does not work with vmap()'d memory which is what the persistent ring buffer has. It is rather trivial to allow this, but for now just disable mmap() of instances that have their ring buffer from the reserve_mem option. If an mmap() is performed on a persistent buffer it will return -ENODEV just like it would if the .mmap field wasn't defined in the file_operations structure. | |||||
| CVE-2025-21777 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Validate the persistent meta data subbuf array The meta data for a mapped ring buffer contains an array of indexes of all the subbuffers. The first entry is the reader page, and the rest of the entries lay out the order of the subbuffers in how the ring buffer link list is to be created. The validator currently makes sure that all the entries are within the range of 0 and nr_subbufs. But it does not check if there are any duplicates. While working on the ring buffer, I corrupted this array, where I added duplicates. The validator did not catch it and created the ring buffer link list on top of it. Luckily, the corruption was only that the reader page was also in the writer path and only presented corrupted data but did not crash the kernel. But if there were duplicates in the writer side, then it could corrupt the ring buffer link list and cause a crash. Create a bitmask array with the size of the number of subbuffers. Then clear it. When walking through the subbuf array checking to see if the entries are within the range, test if its bit is already set in the subbuf_mask. If it is, then there is duplicates and fail the validation. If not, set the corresponding bit and continue. | |||||
| CVE-2025-59228 | 1 Microsoft | 1 Sharepoint Server | 2025-10-28 | N/A | 8.8 HIGH |
| Improper input validation in Microsoft Office SharePoint allows an authorized attacker to execute code over a network. | |||||
| CVE-2025-21771 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix incorrect autogroup migration detection scx_move_task() is called from sched_move_task() and tells the BPF scheduler that cgroup migration is being committed. sched_move_task() is used by both cgroup and autogroup migrations and scx_move_task() tried to filter out autogroup migrations by testing the destination cgroup and PF_EXITING but this is not enough. In fact, without explicitly tagging the thread which is doing the cgroup migration, there is no good way to tell apart scx_move_task() invocations for racing migration to the root cgroup and an autogroup migration. This led to scx_move_task() incorrectly ignoring a migration from non-root cgroup to an autogroup of the root cgroup triggering the following warning: WARNING: CPU: 7 PID: 1 at kernel/sched/ext.c:3725 scx_cgroup_can_attach+0x196/0x340 ... Call Trace: <TASK> cgroup_migrate_execute+0x5b1/0x700 cgroup_attach_task+0x296/0x400 __cgroup_procs_write+0x128/0x140 cgroup_procs_write+0x17/0x30 kernfs_fop_write_iter+0x141/0x1f0 vfs_write+0x31d/0x4a0 __x64_sys_write+0x72/0xf0 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it by adding an argument to sched_move_task() that indicates whether the moving is for a cgroup or autogroup migration. After the change, scx_move_task() is called only for cgroup migrations and renamed to scx_cgroup_move_task(). | |||||
| CVE-2025-59248 | 1 Microsoft | 1 Exchange Server | 2025-10-28 | N/A | 7.5 HIGH |
| Improper input validation in Microsoft Exchange Server allows an unauthorized attacker to perform spoofing over a network. | |||||
| CVE-2025-22021 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: socket: Lookup orig tuple for IPv6 SNAT nf_sk_lookup_slow_v4 does the conntrack lookup for IPv4 packets to restore the original 5-tuple in case of SNAT, to be able to find the right socket (if any). Then socket_match() can correctly check whether the socket was transparent. However, the IPv6 counterpart (nf_sk_lookup_slow_v6) lacks this conntrack lookup, making xt_socket fail to match on the socket when the packet was SNATed. Add the same logic to nf_sk_lookup_slow_v6. IPv6 SNAT is used in Kubernetes clusters for pod-to-world packets, as pods' addresses are in the fd00::/8 ULA subnet and need to be replaced with the node's external address. Cilium leverages Envoy to enforce L7 policies, and Envoy uses transparent sockets. Cilium inserts an iptables prerouting rule that matches on `-m socket --transparent` and redirects the packets to localhost, but it fails to match SNATed IPv6 packets due to that missing conntrack lookup. | |||||
| CVE-2025-59249 | 1 Microsoft | 1 Exchange Server | 2025-10-28 | N/A | 8.8 HIGH |
| Weak authentication in Microsoft Exchange Server allows an authorized attacker to elevate privileges over a network. | |||||
| CVE-2025-22019 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bcachefs: bch2_ioctl_subvolume_destroy() fixes bch2_evict_subvolume_inodes() was getting stuck - due to incorrectly pruning the dcache. Also, fix missing permissions checks. | |||||
| CVE-2024-58092 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix legacy client tracking initialization Get rid of the nfsd4_legacy_tracking_ops->init() call in check_for_legacy_methods(). That will be handled in the caller (nfsd4_client_tracking_init()). Otherwise, we'll wind up calling nfsd4_legacy_tracking_ops->init() twice, and the second time we'll trigger the BUG_ON() in nfsd4_init_recdir(). | |||||
| CVE-2025-22028 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: vimc: skip .s_stream() for stopped entities Syzbot reported [1] a warning prompted by a check in call_s_stream() that checks whether .s_stream() operation is warranted for unstarted or stopped subdevs. Add a simple fix in vimc_streamer_pipeline_terminate() ensuring that entities skip a call to .s_stream() unless they have been previously properly started. [1] Syzbot report: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5933 at drivers/media/v4l2-core/v4l2-subdev.c:460 call_s_stream+0x2df/0x350 drivers/media/v4l2-core/v4l2-subdev.c:460 Modules linked in: CPU: 0 UID: 0 PID: 5933 Comm: syz-executor330 Not tainted 6.13.0-rc2-syzkaller-00362-g2d8308bf5b67 #0 ... Call Trace: <TASK> vimc_streamer_pipeline_terminate+0x218/0x320 drivers/media/test-drivers/vimc/vimc-streamer.c:62 vimc_streamer_pipeline_init drivers/media/test-drivers/vimc/vimc-streamer.c:101 [inline] vimc_streamer_s_stream+0x650/0x9a0 drivers/media/test-drivers/vimc/vimc-streamer.c:203 vimc_capture_start_streaming+0xa1/0x130 drivers/media/test-drivers/vimc/vimc-capture.c:256 vb2_start_streaming+0x15f/0x5a0 drivers/media/common/videobuf2/videobuf2-core.c:1789 vb2_core_streamon+0x2a7/0x450 drivers/media/common/videobuf2/videobuf2-core.c:2348 vb2_streamon drivers/media/common/videobuf2/videobuf2-v4l2.c:875 [inline] vb2_ioctl_streamon+0xf4/0x170 drivers/media/common/videobuf2/videobuf2-v4l2.c:1118 __video_do_ioctl+0xaf0/0xf00 drivers/media/v4l2-core/v4l2-ioctl.c:3122 video_usercopy+0x4d2/0x1620 drivers/media/v4l2-core/v4l2-ioctl.c:3463 v4l2_ioctl+0x1ba/0x250 drivers/media/v4l2-core/v4l2-dev.c:366 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2b85c01b19 ... | |||||
| CVE-2024-58096 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode ath11k_hal_srng_* should be used with srng->lock to protect srng data. For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(), they use ath11k_hal_srng_* for many times but never call srng->lock. So when running (full) monitor mode, warning will occur: RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] Call Trace: ? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k] ? idr_alloc_u32+0x97/0xd0 ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k] ath11k_dp_service_srng+0x289/0x5a0 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k] __napi_poll+0x30/0x1f0 net_rx_action+0x198/0x320 __do_softirq+0xdd/0x319 So add srng->lock for them to avoid such warnings. Inorder to fetch the srng->lock, should change srng's definition from 'void' to 'struct hal_srng'. And initialize them elsewhere to prevent one line of code from being too long. This is consistent with other ring process functions, such as ath11k_dp_process_rx(). Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 | |||||
| CVE-2024-58095 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: jfs: add check read-only before txBeginAnon() call Added a read-only check before calling `txBeginAnon` in `extAlloc` and `extRecord`. This prevents modification attempts on a read-only mounted filesystem, avoiding potential errors or crashes. Call trace: txBeginAnon+0xac/0x154 extAlloc+0xe8/0xdec fs/jfs/jfs_extent.c:78 jfs_get_block+0x340/0xb98 fs/jfs/inode.c:248 __block_write_begin_int+0x580/0x166c fs/buffer.c:2128 __block_write_begin fs/buffer.c:2177 [inline] block_write_begin+0x98/0x11c fs/buffer.c:2236 jfs_write_begin+0x44/0x88 fs/jfs/inode.c:299 | |||||
| CVE-2025-20996 | 1 Samsung | 1 Smart Switch | 2025-10-28 | N/A | 5.0 MEDIUM |
| Improper authorization in Smart Switch installed on non-Samsung Device prior to version 3.7.64.10 allows local attackers to read data with the privilege of Smart Switch. User interaction is required for triggering this vulnerability. | |||||
| CVE-2024-58094 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: jfs: add check read-only before truncation in jfs_truncate_nolock() Added a check for "read-only" mode in the `jfs_truncate_nolock` function to avoid errors related to writing to a read-only filesystem. Call stack: block_write_begin() { jfs_write_failed() { jfs_truncate() { jfs_truncate_nolock() { txEnd() { ... log = JFS_SBI(tblk->sb)->log; // (log == NULL) If the `isReadOnly(ip)` condition is triggered in `jfs_truncate_nolock`, the function execution will stop, and no further data modification will occur. Instead, the `xtTruncate` function will be called with the "COMMIT_WMAP" flag, preventing modifications in "read-only" mode. | |||||