Filtered by vendor Linux
Subscribe
Total
12246 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-47057 | 1 Linux | 1 Linux Kernel | 2025-03-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ss - Fix memory leak of object d when dma_iv fails to map In the case where the dma_iv mapping fails, the return error path leaks the memory allocated to object d. Fix this by adding a new error return label and jumping to this to ensure d is free'd before the return. Addresses-Coverity: ("Resource leak") | |||||
| CVE-2023-52479 | 1 Linux | 1 Linux Kernel | 2025-03-19 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix uaf in smb20_oplock_break_ack drop reference after use opinfo. | |||||
| CVE-2021-47044 | 1 Linux | 1 Linux Kernel | 2025-03-19 | N/A | 7.7 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix shift-out-of-bounds in load_balance() Syzbot reported a handful of occurrences where an sd->nr_balance_failed can grow to much higher values than one would expect. A successful load_balance() resets it to 0; a failed one increments it. Once it gets to sd->cache_nice_tries + 3, this *should* trigger an active balance, which will either set it to sd->cache_nice_tries+1 or reset it to 0. However, in case the to-be-active-balanced task is not allowed to run on env->dst_cpu, then the increment is done without any further modification. This could then be repeated ad nauseam, and would explain the absurdly high values reported by syzbot (86, 149). VincentG noted there is value in letting sd->cache_nice_tries grow, so the shift itself should be fixed. That means preventing: """ If the value of the right operand is negative or is greater than or equal to the width of the promoted left operand, the behavior is undefined. """ Thus we need to cap the shift exponent to BITS_PER_TYPE(typeof(lefthand)) - 1. I had a look around for other similar cases via coccinelle: @expr@ position pos; expression E1; expression E2; @@ ( E1 >> E2@pos | E1 >> E2@pos ) @cst depends on expr@ position pos; expression expr.E1; constant cst; @@ ( E1 >> cst@pos | E1 << cst@pos ) @script:python depends on !cst@ pos << expr.pos; exp << expr.E2; @@ # Dirty hack to ignore constexpr if exp.upper() != exp: coccilib.report.print_report(pos[0], "Possible UB shift here") The only other match in kernel/sched is rq_clock_thermal() which employs sched_thermal_decay_shift, and that exponent is already capped to 10, so that one is fine. | |||||
| CVE-2021-47031 | 1 Linux | 1 Linux Kernel | 2025-03-19 | N/A | 4.3 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix memory leak in mt7921_coredump_work Fix possible memory leak in mt7921_coredump_work. | |||||
| CVE-2021-47023 | 1 Linux | 1 Linux Kernel | 2025-03-19 | N/A | 8.2 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix port event handling on init For some reason there might be a crash during ports creation if port events are handling at the same time because fw may send initial port event with down state. The crash points to cancel_delayed_work() which is called when port went is down. Currently I did not find out the real cause of the issue, so fixed it by cancel port stats work only if previous port's state was up & runnig. The following is the crash which can be triggered: [ 28.311104] Unable to handle kernel paging request at virtual address 000071775f776600 [ 28.319097] Mem abort info: [ 28.321914] ESR = 0x96000004 [ 28.324996] EC = 0x25: DABT (current EL), IL = 32 bits [ 28.330350] SET = 0, FnV = 0 [ 28.333430] EA = 0, S1PTW = 0 [ 28.336597] Data abort info: [ 28.339499] ISV = 0, ISS = 0x00000004 [ 28.343362] CM = 0, WnR = 0 [ 28.346354] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000100bf7000 [ 28.352842] [000071775f776600] pgd=0000000000000000, p4d=0000000000000000 [ 28.359695] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 28.365310] Modules linked in: prestera_pci(+) prestera uio_pdrv_genirq [ 28.372005] CPU: 0 PID: 1291 Comm: kworker/0:1H Not tainted 5.11.0-rc4 #1 [ 28.378846] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 28.384283] Workqueue: prestera_fw_wq prestera_fw_evt_work_fn [prestera_pci] [ 28.391413] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 28.397468] pc : get_work_pool+0x48/0x60 [ 28.401442] lr : try_to_grab_pending+0x6c/0x1b0 [ 28.406018] sp : ffff80001391bc60 [ 28.409358] x29: ffff80001391bc60 x28: 0000000000000000 [ 28.414725] x27: ffff000104fc8b40 x26: ffff80001127de88 [ 28.420089] x25: 0000000000000000 x24: ffff000106119760 [ 28.425452] x23: ffff00010775dd60 x22: ffff00010567e000 [ 28.430814] x21: 0000000000000000 x20: ffff80001391bcb0 [ 28.436175] x19: ffff00010775deb8 x18: 00000000000000c0 [ 28.441537] x17: 0000000000000000 x16: 000000008d9b0e88 [ 28.446898] x15: 0000000000000001 x14: 00000000000002ba [ 28.452261] x13: 80a3002c00000002 x12: 00000000000005f4 [ 28.457622] x11: 0000000000000030 x10: 000000000000000c [ 28.462985] x9 : 000000000000000c x8 : 0000000000000030 [ 28.468346] x7 : ffff800014400000 x6 : ffff000106119758 [ 28.473708] x5 : 0000000000000003 x4 : ffff00010775dc60 [ 28.479068] x3 : 0000000000000000 x2 : 0000000000000060 [ 28.484429] x1 : 000071775f776600 x0 : ffff00010775deb8 [ 28.489791] Call trace: [ 28.492259] get_work_pool+0x48/0x60 [ 28.495874] cancel_delayed_work+0x38/0xb0 [ 28.500011] prestera_port_handle_event+0x90/0xa0 [prestera] [ 28.505743] prestera_evt_recv+0x98/0xe0 [prestera] [ 28.510683] prestera_fw_evt_work_fn+0x180/0x228 [prestera_pci] [ 28.516660] process_one_work+0x1e8/0x360 [ 28.520710] worker_thread+0x44/0x480 [ 28.524412] kthread+0x154/0x160 [ 28.527670] ret_from_fork+0x10/0x38 [ 28.531290] Code: a8c17bfd d50323bf d65f03c0 9278dc21 (f9400020) [ 28.537429] ---[ end trace 5eced933df3a080b ]--- | |||||
| CVE-2021-47010 | 1 Linux | 1 Linux Kernel | 2025-03-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: Only allow init netns to set default tcp cong to a restricted algo tcp_set_default_congestion_control() is netns-safe in that it writes to &net->ipv4.tcp_congestion_control, but it also sets ca->flags |= TCP_CONG_NON_RESTRICTED which is not namespaced. This has the unintended side-effect of changing the global net.ipv4.tcp_allowed_congestion_control sysctl, despite the fact that it is read-only: 97684f0970f6 ("net: Make tcp_allowed_congestion_control readonly in non-init netns") Resolve this netns "leak" by only allowing the init netns to set the default algorithm to one that is restricted. This restriction could be removed if tcp_allowed_congestion_control were namespace-ified in the future. This bug was uncovered with https://github.com/JonathonReinhart/linux-netns-sysctl-verify | |||||
| CVE-2024-26795 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: riscv: Sparse-Memory/vmemmap out-of-bounds fix Offset vmemmap so that the first page of vmemmap will be mapped to the first page of physical memory in order to ensure that vmemmap’s bounds will be respected during pfn_to_page()/page_to_pfn() operations. The conversion macros will produce correct SV39/48/57 addresses for every possible/valid DRAM_BASE inside the physical memory limits. v2:Address Alex's comments | |||||
| CVE-2021-47006 | 1 Linux | 1 Linux Kernel | 2025-03-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9064/1: hw_breakpoint: Do not directly check the event's overflow_handler hook The commit 1879445dfa7b ("perf/core: Set event's default ::overflow_handler()") set a default event->overflow_handler in perf_event_alloc(), and replace the check event->overflow_handler with is_default_overflow_handler(), but one is missing. Currently, the bp->overflow_handler can not be NULL. As a result, enable_single_step() is always not invoked. Comments from Zhen Lei: https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210207105934.2001-1-thunder.leizhen@huawei.com/ | |||||
| CVE-2020-36780 | 1 Linux | 1 Linux Kernel | 2025-03-19 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: i2c: sprd: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in sprd_i2c_master_xfer() and sprd_i2c_remove(). However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. | |||||
| CVE-2023-31084 | 4 Debian, Fedoraproject, Linux and 1 more | 5 Debian Linux, Fedora, Linux Kernel and 2 more | 2025-03-18 | N/A | 5.5 MEDIUM |
| An issue was discovered in drivers/media/dvb-core/dvb_frontend.c in the Linux kernel 6.2. There is a blocking operation when a task is in !TASK_RUNNING. In dvb_frontend_get_event, wait_event_interruptible is called; the condition is dvb_frontend_test_event(fepriv,events). In dvb_frontend_test_event, down(&fepriv->sem) is called. However, wait_event_interruptible would put the process to sleep, and down(&fepriv->sem) may block the process. | |||||
| CVE-2023-2177 | 1 Linux | 1 Linux Kernel | 2025-03-18 | N/A | 5.5 MEDIUM |
| A null pointer dereference issue was found in the sctp network protocol in net/sctp/stream_sched.c in Linux Kernel. If stream_in allocation is failed, stream_out is freed which would further be accessed. A local user could use this flaw to crash the system or potentially cause a denial of service. | |||||
| CVE-2023-2019 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-03-18 | N/A | 4.4 MEDIUM |
| A flaw was found in the Linux kernel's netdevsim device driver, within the scheduling of events. This issue results from the improper management of a reference count. This may allow an attacker to create a denial of service condition on the system. | |||||
| CVE-2023-33288 | 1 Linux | 1 Linux Kernel | 2025-03-18 | N/A | 4.7 MEDIUM |
| An issue was discovered in the Linux kernel before 6.2.9. A use-after-free was found in bq24190_remove in drivers/power/supply/bq24190_charger.c. It could allow a local attacker to crash the system due to a race condition. | |||||
| CVE-2023-33250 | 2 Linux, Netapp | 9 Linux Kernel, H300s, H300s Firmware and 6 more | 2025-03-18 | N/A | 4.4 MEDIUM |
| The Linux kernel 6.3 has a use-after-free in iopt_unmap_iova_range in drivers/iommu/iommufd/io_pagetable.c. | |||||
| CVE-2023-1859 | 1 Linux | 1 Linux Kernel | 2025-03-18 | N/A | 4.7 MEDIUM |
| A use-after-free flaw was found in xen_9pfs_front_removet in net/9p/trans_xen.c in Xen transport for 9pfs in the Linux Kernel. This flaw could allow a local attacker to crash the system due to a race problem, possibly leading to a kernel information leak. | |||||
| CVE-2023-1195 | 1 Linux | 1 Linux Kernel | 2025-03-18 | N/A | 5.5 MEDIUM |
| A use-after-free flaw was found in reconn_set_ipaddr_from_hostname in fs/cifs/connect.c in the Linux kernel. The issue occurs when it forgets to set the free pointer server->hostname to NULL, leading to an invalid pointer request. | |||||
| CVE-2021-33391 | 2 Htacg, Linux | 2 Tidy, Linux Kernel | 2025-03-18 | N/A | 9.8 CRITICAL |
| An issue in HTACG HTML Tidy v5.7.28 allows attacker to execute arbitrary code via the -g option of the CleanNode() function in gdoc.c. | |||||
| CVE-2024-26812 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Create persistent INTx handler A vulnerability exists where the eventfd for INTx signaling can be deconfigured, which unregisters the IRQ handler but still allows eventfds to be signaled with a NULL context through the SET_IRQS ioctl or through unmask irqfd if the device interrupt is pending. Ideally this could be solved with some additional locking; the igate mutex serializes the ioctl and config space accesses, and the interrupt handler is unregistered relative to the trigger, but the irqfd path runs asynchronous to those. The igate mutex cannot be acquired from the atomic context of the eventfd wake function. Disabling the irqfd relative to the eventfd registration is potentially incompatible with existing userspace. As a result, the solution implemented here moves configuration of the INTx interrupt handler to track the lifetime of the INTx context object and irq_type configuration, rather than registration of a particular trigger eventfd. Synchronization is added between the ioctl path and eventfd_signal() wrapper such that the eventfd trigger can be dynamically updated relative to in-flight interrupts or irqfd callbacks. | |||||
| CVE-2021-47216 | 1 Linux | 1 Linux Kernel | 2025-03-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: advansys: Fix kernel pointer leak Pointers should be printed with %p or %px rather than cast to 'unsigned long' and printed with %lx. Change %lx to %p to print the hashed pointer. | |||||
| CVE-2024-26780 | 1 Linux | 1 Linux Kernel | 2025-03-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix task hung while purging oob_skb in GC. syzbot reported a task hung; at the same time, GC was looping infinitely in list_for_each_entry_safe() for OOB skb. [0] syzbot demonstrated that the list_for_each_entry_safe() was not actually safe in this case. A single skb could have references for multiple sockets. If we free such a skb in the list_for_each_entry_safe(), the current and next sockets could be unlinked in a single iteration. unix_notinflight() uses list_del_init() to unlink the socket, so the prefetched next socket forms a loop itself and list_for_each_entry_safe() never stops. Here, we must use while() and make sure we always fetch the first socket. [0]: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 5065 Comm: syz-executor236 Not tainted 6.8.0-rc3-syzkaller-00136-g1f719a2f3fa6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 RIP: 0010:preempt_count arch/x86/include/asm/preempt.h:26 [inline] RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline] RIP: 0010:__sanitizer_cov_trace_pc+0xd/0x60 kernel/kcov.c:207 Code: cc cc cc cc 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 65 48 8b 14 25 40 c2 03 00 <65> 8b 05 b4 7c 78 7e a9 00 01 ff 00 48 8b 34 24 74 0f f6 c4 01 74 RSP: 0018:ffffc900033efa58 EFLAGS: 00000283 RAX: ffff88807b077800 RBX: ffff88807b077800 RCX: 1ffffffff27b1189 RDX: ffff88802a5a3b80 RSI: ffffffff8968488d RDI: ffff88807b077f70 RBP: ffffc900033efbb0 R08: 0000000000000001 R09: fffffbfff27a900c R10: ffffffff93d48067 R11: ffffffff8ae000eb R12: ffff88807b077800 R13: dffffc0000000000 R14: ffff88807b077e40 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564f4fc1e3a8 CR3: 000000000d57a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> unix_gc+0x563/0x13b0 net/unix/garbage.c:319 unix_release_sock+0xa93/0xf80 net/unix/af_unix.c:683 unix_release+0x91/0xf0 net/unix/af_unix.c:1064 __sock_release+0xb0/0x270 net/socket.c:659 sock_close+0x1c/0x30 net/socket.c:1421 __fput+0x270/0xb80 fs/file_table.c:376 task_work_run+0x14f/0x250 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xa8a/0x2ad0 kernel/exit.c:871 do_group_exit+0xd4/0x2a0 kernel/exit.c:1020 __do_sys_exit_group kernel/exit.c:1031 [inline] __se_sys_exit_group kernel/exit.c:1029 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1029 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd5/0x270 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f9d6cbdac09 Code: Unable to access opcode bytes at 0x7f9d6cbdabdf. RSP: 002b:00007fff5952feb8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9d6cbdac09 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 00007f9d6cc552b0 R08: ffffffffffffffb8 R09: 0000000000000006 R10: 0000000000000006 R11: 0000000000000246 R12: 00007f9d6cc552b0 R13: 0000000000000000 R14: 00007f9d6cc55d00 R15: 00007f9d6cbabe70 </TASK> | |||||