Total
9909 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-26707 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: hsr: remove WARN_ONCE() in send_hsr_supervision_frame() Syzkaller reported [1] hitting a warning after failing to allocate resources for skb in hsr_init_skb(). Since a WARN_ONCE() call will not help much in this case, it might be prudent to switch to netdev_warn_once(). At the very least it will suppress syzkaller reports such as [1]. Just in case, use netdev_warn_once() in send_prp_supervision_frame() for similar reasons. [1] HSR: Could not send supervision frame WARNING: CPU: 1 PID: 85 at net/hsr/hsr_device.c:294 send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 RIP: 0010:send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 ... Call Trace: <IRQ> hsr_announce+0x114/0x370 net/hsr/hsr_device.c:382 call_timer_fn+0x193/0x590 kernel/time/timer.c:1700 expire_timers kernel/time/timer.c:1751 [inline] __run_timers+0x764/0xb20 kernel/time/timer.c:2022 run_timer_softirq+0x58/0xd0 kernel/time/timer.c:2035 __do_softirq+0x21a/0x8de kernel/softirq.c:553 invoke_softirq kernel/softirq.c:427 [inline] __irq_exit_rcu kernel/softirq.c:632 [inline] irq_exit_rcu+0xb7/0x120 kernel/softirq.c:644 sysvec_apic_timer_interrupt+0x95/0xb0 arch/x86/kernel/apic/apic.c:1076 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:649 ... This issue is also found in older kernels (at least up to 5.10). | |||||
| CVE-2024-26645 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Ensure visibility when inserting an element into tracing_map Running the following two commands in parallel on a multi-processor AArch64 machine can sporadically produce an unexpected warning about duplicate histogram entries: $ while true; do echo hist:key=id.syscall:val=hitcount > \ /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist sleep 0.001 done $ stress-ng --sysbadaddr $(nproc) The warning looks as follows: [ 2911.172474] ------------[ cut here ]------------ [ 2911.173111] Duplicates detected: 1 [ 2911.173574] WARNING: CPU: 2 PID: 12247 at kernel/trace/tracing_map.c:983 tracing_map_sort_entries+0x3e0/0x408 [ 2911.174702] Modules linked in: iscsi_ibft(E) iscsi_boot_sysfs(E) rfkill(E) af_packet(E) nls_iso8859_1(E) nls_cp437(E) vfat(E) fat(E) ena(E) tiny_power_button(E) qemu_fw_cfg(E) button(E) fuse(E) efi_pstore(E) ip_tables(E) x_tables(E) xfs(E) libcrc32c(E) aes_ce_blk(E) aes_ce_cipher(E) crct10dif_ce(E) polyval_ce(E) polyval_generic(E) ghash_ce(E) gf128mul(E) sm4_ce_gcm(E) sm4_ce_ccm(E) sm4_ce(E) sm4_ce_cipher(E) sm4(E) sm3_ce(E) sm3(E) sha3_ce(E) sha512_ce(E) sha512_arm64(E) sha2_ce(E) sha256_arm64(E) nvme(E) sha1_ce(E) nvme_core(E) nvme_auth(E) t10_pi(E) sg(E) scsi_mod(E) scsi_common(E) efivarfs(E) [ 2911.174738] Unloaded tainted modules: cppc_cpufreq(E):1 [ 2911.180985] CPU: 2 PID: 12247 Comm: cat Kdump: loaded Tainted: G E 6.7.0-default #2 1b58bbb22c97e4399dc09f92d309344f69c44a01 [ 2911.182398] Hardware name: Amazon EC2 c7g.8xlarge/, BIOS 1.0 11/1/2018 [ 2911.183208] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2911.184038] pc : tracing_map_sort_entries+0x3e0/0x408 [ 2911.184667] lr : tracing_map_sort_entries+0x3e0/0x408 [ 2911.185310] sp : ffff8000a1513900 [ 2911.185750] x29: ffff8000a1513900 x28: ffff0003f272fe80 x27: 0000000000000001 [ 2911.186600] x26: ffff0003f272fe80 x25: 0000000000000030 x24: 0000000000000008 [ 2911.187458] x23: ffff0003c5788000 x22: ffff0003c16710c8 x21: ffff80008017f180 [ 2911.188310] x20: ffff80008017f000 x19: ffff80008017f180 x18: ffffffffffffffff [ 2911.189160] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000a15134b8 [ 2911.190015] x14: 0000000000000000 x13: 205d373432323154 x12: 5b5d313131333731 [ 2911.190844] x11: 00000000fffeffff x10: 00000000fffeffff x9 : ffffd1b78274a13c [ 2911.191716] x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 000000000057ffa8 [ 2911.192554] x5 : ffff0012f6c24ec0 x4 : 0000000000000000 x3 : ffff2e5b72b5d000 [ 2911.193404] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0003ff254480 [ 2911.194259] Call trace: [ 2911.194626] tracing_map_sort_entries+0x3e0/0x408 [ 2911.195220] hist_show+0x124/0x800 [ 2911.195692] seq_read_iter+0x1d4/0x4e8 [ 2911.196193] seq_read+0xe8/0x138 [ 2911.196638] vfs_read+0xc8/0x300 [ 2911.197078] ksys_read+0x70/0x108 [ 2911.197534] __arm64_sys_read+0x24/0x38 [ 2911.198046] invoke_syscall+0x78/0x108 [ 2911.198553] el0_svc_common.constprop.0+0xd0/0xf8 [ 2911.199157] do_el0_svc+0x28/0x40 [ 2911.199613] el0_svc+0x40/0x178 [ 2911.200048] el0t_64_sync_handler+0x13c/0x158 [ 2911.200621] el0t_64_sync+0x1a8/0x1b0 [ 2911.201115] ---[ end trace 0000000000000000 ]--- The problem appears to be caused by CPU reordering of writes issued from __tracing_map_insert(). The check for the presence of an element with a given key in this function is: val = READ_ONCE(entry->val); if (val && keys_match(key, val->key, map->key_size)) ... The write of a new entry is: elt = get_free_elt(map); memcpy(elt->key, key, map->key_size); entry->val = elt; The "memcpy(elt->key, key, map->key_size);" and "entry->val = elt;" stores may become visible in the reversed order on another CPU. This second CPU might then incorrectly determine that a new key doesn't match an already present val->key and subse ---truncated--- | |||||
| CVE-2023-52622 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid online resizing failures due to oversized flex bg When we online resize an ext4 filesystem with a oversized flexbg_size, mkfs.ext4 -F -G 67108864 $dev -b 4096 100M mount $dev $dir resize2fs $dev 16G the following WARN_ON is triggered: ================================================================== WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550 Modules linked in: sg(E) CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314 RIP: 0010:__alloc_pages+0x411/0x550 Call Trace: <TASK> __kmalloc_large_node+0xa2/0x200 __kmalloc+0x16e/0x290 ext4_resize_fs+0x481/0xd80 __ext4_ioctl+0x1616/0x1d90 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xf0/0x150 do_syscall_64+0x3b/0x90 ================================================================== This is because flexbg_size is too large and the size of the new_group_data array to be allocated exceeds MAX_ORDER. Currently, the minimum value of MAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the corresponding maximum number of groups that can be allocated is: (PAGE_SIZE << MAX_ORDER) / sizeof(struct ext4_new_group_data) ˜ 21845 And the value that is down-aligned to the power of 2 is 16384. Therefore, this value is defined as MAX_RESIZE_BG, and the number of groups added each time does not exceed this value during resizing, and is added multiple times to complete the online resizing. The difference is that the metadata in a flex_bg may be more dispersed. | |||||
| CVE-2023-52635 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Synchronize devfreq_monitor_[start/stop] There is a chance if a frequent switch of the governor done in a loop result in timer list corruption where timer cancel being done from two place one from cancel_delayed_work_sync() and followed by expire_timers() can be seen from the traces[1]. while true do echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor done It looks to be issue with devfreq driver where device_monitor_[start/stop] need to synchronized so that delayed work should get corrupted while it is either being queued or running or being cancelled. Let's use polling flag and devfreq lock to synchronize the queueing the timer instance twice and work data being corrupted. [1] ... .. <idle>-0 [003] 9436.209662: timer_cancel timer=0xffffff80444f0428 <idle>-0 [003] 9436.209664: timer_expire_entry timer=0xffffff80444f0428 now=0x10022da1c function=__typeid__ZTSFvP10timer_listE_global_addr baseclk=0x10022da1c <idle>-0 [003] 9436.209718: timer_expire_exit timer=0xffffff80444f0428 kworker/u16:6-14217 [003] 9436.209863: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2b now=0x10022da1c flags=182452227 vendor.xxxyyy.ha-1593 [004] 9436.209888: timer_cancel timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216390: timer_init timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216392: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2c now=0x10022da1d flags=186646532 vendor.xxxyyy.ha-1593 [005] 9436.220992: timer_cancel timer=0xffffff80444f0428 xxxyyyTraceManag-7795 [004] 9436.261641: timer_cancel timer=0xffffff80444f0428 [2] 9436.261653][ C4] Unable to handle kernel paging request at virtual address dead00000000012a [ 9436.261664][ C4] Mem abort info: [ 9436.261666][ C4] ESR = 0x96000044 [ 9436.261669][ C4] EC = 0x25: DABT (current EL), IL = 32 bits [ 9436.261671][ C4] SET = 0, FnV = 0 [ 9436.261673][ C4] EA = 0, S1PTW = 0 [ 9436.261675][ C4] Data abort info: [ 9436.261677][ C4] ISV = 0, ISS = 0x00000044 [ 9436.261680][ C4] CM = 0, WnR = 1 [ 9436.261682][ C4] [dead00000000012a] address between user and kernel address ranges [ 9436.261685][ C4] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 9436.261701][ C4] Skip md ftrace buffer dump for: 0x3a982d0 ... [ 9436.262138][ C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S W O 5.10.149-android12-9-o-g17f915d29d0c #1 [ 9436.262141][ C4] Hardware name: Qualcomm Technologies, Inc. (DT) [ 9436.262144][ C4] pstate: 22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--) [ 9436.262161][ C4] pc : expire_timers+0x9c/0x438 [ 9436.262164][ C4] lr : expire_timers+0x2a4/0x438 [ 9436.262168][ C4] sp : ffffffc010023dd0 [ 9436.262171][ C4] x29: ffffffc010023df0 x28: ffffffd0636fdc18 [ 9436.262178][ C4] x27: ffffffd063569dd0 x26: ffffffd063536008 [ 9436.262182][ C4] x25: 0000000000000001 x24: ffffff88f7c69280 [ 9436.262185][ C4] x23: 00000000000000e0 x22: dead000000000122 [ 9436.262188][ C4] x21: 000000010022da29 x20: ffffff8af72b4e80 [ 9436.262191][ C4] x19: ffffffc010023e50 x18: ffffffc010025038 [ 9436.262195][ C4] x17: 0000000000000240 x16: 0000000000000201 [ 9436.262199][ C4] x15: ffffffffffffffff x14: ffffff889f3c3100 [ 9436.262203][ C4] x13: ffffff889f3c3100 x12: 00000000049f56b8 [ 9436.262207][ C4] x11: 00000000049f56b8 x10: 00000000ffffffff [ 9436.262212][ C4] x9 : ffffffc010023e50 x8 : dead000000000122 [ 9436.262216][ C4] x7 : ffffffffffffffff x6 : ffffffc0100239d8 [ 9436.262220][ C4] x5 : 0000000000000000 x4 : 0000000000000101 [ 9436.262223][ C4] x3 : 0000000000000080 x2 : ffffff8 ---truncated--- | |||||
| CVE-2024-26659 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: xhci: handle isoc Babble and Buffer Overrun events properly xHCI 4.9 explicitly forbids assuming that the xHC has released its ownership of a multi-TRB TD when it reports an error on one of the early TRBs. Yet the driver makes such assumption and releases the TD, allowing the remaining TRBs to be freed or overwritten by new TDs. The xHC should also report completion of the final TRB due to its IOC flag being set by us, regardless of prior errors. This event cannot be recognized if the TD has already been freed earlier, resulting in "Transfer event TRB DMA ptr not part of current TD" error message. Fix this by reusing the logic for processing isoc Transaction Errors. This also handles hosts which fail to report the final completion. Fix transfer length reporting on Babble errors. They may be caused by device malfunction, no guarantee that the buffer has been filled. | |||||
| CVE-2024-26664 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Fix out-of-bounds memory access Fix a bug that pdata->cpu_map[] is set before out-of-bounds check. The problem might be triggered on systems with more than 128 cores per package. | |||||
| CVE-2024-26671 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix IO hang from sbitmap wakeup race In blk_mq_mark_tag_wait(), __add_wait_queue() may be re-ordered with the following blk_mq_get_driver_tag() in case of getting driver tag failure. Then in __sbitmap_queue_wake_up(), waitqueue_active() may not observe the added waiter in blk_mq_mark_tag_wait() and wake up nothing, meantime blk_mq_mark_tag_wait() can't get driver tag successfully. This issue can be reproduced by running the following test in loop, and fio hang can be observed in < 30min when running it on my test VM in laptop. modprobe -r scsi_debug modprobe scsi_debug delay=0 dev_size_mb=4096 max_queue=1 host_max_queue=1 submit_queues=4 dev=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename` fio --filename=/dev/"$dev" --direct=1 --rw=randrw --bs=4k --iodepth=1 \ --runtime=100 --numjobs=40 --time_based --name=test \ --ioengine=libaio Fix the issue by adding one explicit barrier in blk_mq_mark_tag_wait(), which is just fine in case of running out of tag. | |||||
| CVE-2019-12483 | 2 Debian, Gpac | 2 Debian Linux, Gpac | 2025-03-14 | 6.8 MEDIUM | 7.8 HIGH |
| An issue was discovered in GPAC 0.7.1. There is a heap-based buffer overflow in the function ReadGF_IPMPX_RemoveToolNotificationListener in odf/ipmpx_code.c in libgpac.a, as demonstrated by MP4Box. | |||||
| CVE-2019-12482 | 2 Debian, Gpac | 2 Debian Linux, Gpac | 2025-03-14 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered in GPAC 0.7.1. There is a NULL pointer dereference in the function gf_isom_get_original_format_type at isomedia/drm_sample.c in libgpac.a, as demonstrated by MP4Box. | |||||
| CVE-2019-12481 | 2 Debian, Gpac | 2 Debian Linux, Gpac | 2025-03-14 | 4.3 MEDIUM | 5.5 MEDIUM |
| An issue was discovered in GPAC 0.7.1. There is a NULL pointer dereference in the function GetESD at isomedia/track.c in libgpac.a, as demonstrated by MP4Box. | |||||
| CVE-2023-52585 | 3 Debian, Linux, Netapp | 8 Debian Linux, Linux Kernel, H610c and 5 more | 2025-03-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix possible NULL dereference in amdgpu_ras_query_error_status_helper() Return invalid error code -EINVAL for invalid block id. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1183 amdgpu_ras_query_error_status_helper() error: we previously assumed 'info' could be null (see line 1176) | |||||
| CVE-2023-52597 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-14 | N/A | 4.0 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: fix setting of fpc register kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control (fpc) register of a guest cpu. The new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the host process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space / host process fpc register value, however it will be discarded, when returning to user space. In result the host process will incorrectly continue to run with the value that was supposed to be used for a guest cpu. Fix this by simply removing the test. There is another test right before the SIE context is entered which will handles invalid values. This results in a change of behaviour: invalid values will now be accepted instead of that the ioctl fails with -EINVAL. This seems to be acceptable, given that this interface is most likely not used anymore, and this is in addition the same behaviour implemented with the memory mapped interface (replace invalid values with zero) - see sync_regs() in kvm-s390.c. | |||||
| CVE-2023-52601 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in dbAdjTree Currently there is a bound check missing in the dbAdjTree while accessing the dmt_stree. To add the required check added the bool is_ctl which is required to determine the size as suggest in the following commit. https://lore.kernel.org/linux-kernel-mentees/f9475918-2186-49b8-b801-6f0f9e75f4fa@oracle.com/ | |||||
| CVE-2023-52602 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: jfs: fix slab-out-of-bounds Read in dtSearch Currently while searching for current page in the sorted entry table of the page there is a out of bound access. Added a bound check to fix the error. Dave: Set return code to -EIO | |||||
| CVE-2020-16304 | 3 Artifex, Canonical, Debian | 3 Ghostscript, Ubuntu Linux, Debian Linux | 2025-03-14 | 4.3 MEDIUM | 5.5 MEDIUM |
| A buffer overflow vulnerability in image_render_color_thresh() in base/gxicolor.c of Artifex Software GhostScript v9.18 to v9.50 allows a remote attacker to escalate privileges via a crafted eps file. This is fixed in v9.51. | |||||
| CVE-2020-16297 | 3 Artifex, Canonical, Debian | 3 Ghostscript, Ubuntu Linux, Debian Linux | 2025-03-14 | 4.3 MEDIUM | 5.5 MEDIUM |
| A buffer overflow vulnerability in FloydSteinbergDitheringC() in contrib/gdevbjca.c of Artifex Software GhostScript v9.18 to v9.50 allows a remote attacker to cause a denial of service via a crafted PDF file. This is fixed in v9.51. | |||||
| CVE-2024-26643 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout While the rhashtable set gc runs asynchronously, a race allows it to collect elements from anonymous sets with timeouts while it is being released from the commit path. Mingi Cho originally reported this issue in a different path in 6.1.x with a pipapo set with low timeouts which is not possible upstream since 7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set element timeout"). Fix this by setting on the dead flag for anonymous sets to skip async gc in this case. According to 08e4c8c5919f ("netfilter: nf_tables: mark newset as dead on transaction abort"), Florian plans to accelerate abort path by releasing objects via workqueue, therefore, this sets on the dead flag for abort path too. | |||||
| CVE-2024-26642 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: disallow anonymous set with timeout flag Anonymous sets are never used with timeout from userspace, reject this. Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work. | |||||
| CVE-2024-4777 | 2 Debian, Mozilla | 3 Debian Linux, Firefox, Thunderbird | 2025-03-13 | N/A | 8.8 HIGH |
| Memory safety bugs present in Firefox 125, Firefox ESR 115.10, and Thunderbird 115.10. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 126, Firefox ESR < 115.11, and Thunderbird < 115.11. | |||||
| CVE-2023-23916 | 5 Debian, Fedoraproject, Haxx and 2 more | 13 Debian Linux, Fedora, Curl and 10 more | 2025-03-12 | N/A | 6.5 MEDIUM |
| An allocation of resources without limits or throttling vulnerability exists in curl <v7.88.0 based on the "chained" HTTP compression algorithms, meaning that a server response can be compressed multiple times and potentially with differentalgorithms. The number of acceptable "links" in this "decompression chain" wascapped, but the cap was implemented on a per-header basis allowing a maliciousserver to insert a virtually unlimited number of compression steps simply byusing many headers. The use of such a decompression chain could result in a "malloc bomb", making curl end up spending enormous amounts of allocated heap memory, or trying to and returning out of memory errors. | |||||