Total
9599 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-38312 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: core: fbcvt: avoid division by 0 in fb_cvt_hperiod() In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000, cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It's then passed to fb_cvt_hperiod(), where it's used as a divider -- division by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to avoid such overflow... Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. | |||||
| CVE-2025-38310 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: seg6: Fix validation of nexthop addresses The kernel currently validates that the length of the provided nexthop address does not exceed the specified length. This can lead to the kernel reading uninitialized memory if user space provided a shorter length than the specified one. Fix by validating that the provided length exactly matches the specified one. | |||||
| CVE-2025-38305 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use() There is no disagreement that we should check both ptp->is_virtual_clock and ptp->n_vclocks to check if the ptp virtual clock is in use. However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in ptp_vclock_in_use(), we observe a recursive lock in the call trace starting from n_vclocks_store(). ============================================ WARNING: possible recursive locking detected 6.15.0-rc6 #1 Not tainted -------------------------------------------- syz.0.1540/13807 is trying to acquire lock: ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at: ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline] ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at: ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415 but task is already holding lock: ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at: n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&ptp->n_vclocks_mux); lock(&ptp->n_vclocks_mux); *** DEADLOCK *** .... ============================================ The best way to solve this is to remove the logic that checks ptp->n_vclocks in ptp_vclock_in_use(). The reason why this is appropriate is that any path that uses ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater than 0 before unregistering vclocks, and all functions are already written this way. And in the function that uses ptp->n_vclocks, we already get ptp->n_vclocks_mux before unregistering vclocks. Therefore, we need to remove the redundant check for ptp->n_vclocks in ptp_vclock_in_use() to prevent recursive locking. | |||||
| CVE-2025-38304 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix NULL pointer deference on eir_get_service_data The len parameter is considered optional so it can be NULL so it cannot be used for skipping to next entry of EIR_SERVICE_DATA. | |||||
| CVE-2025-38300 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ce-cipher - fix error handling in sun8i_ce_cipher_prepare() Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare(): 1] If dma_map_sg() fails for areq->dst, the device driver would try to free DMA memory it has not allocated in the first place. To fix this, on the "theend_sgs" error path, call dma unmap only if the corresponding dma map was successful. 2] If the dma_map_single() call for the IV fails, the device driver would try to free an invalid DMA memory address on the "theend_iv" path: ------------[ cut here ]------------ DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90 Modules linked in: skcipher_example(O+) CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT Tainted: [O]=OOT_MODULE Hardware name: OrangePi Zero2 (DT) pc : check_unmap+0x123c/0x1b90 lr : check_unmap+0x123c/0x1b90 ... Call trace: check_unmap+0x123c/0x1b90 (P) debug_dma_unmap_page+0xac/0xc0 dma_unmap_page_attrs+0x1f4/0x5fc sun8i_ce_cipher_do_one+0x1bd4/0x1f40 crypto_pump_work+0x334/0x6e0 kthread_worker_fn+0x21c/0x438 kthread+0x374/0x664 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- To fix this, check for !dma_mapping_error() before calling dma_unmap_single() on the "theend_iv" path. | |||||
| CVE-2025-38298 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/skx_common: Fix general protection fault After loading i10nm_edac (which automatically loads skx_edac_common), if unload only i10nm_edac, then reload it and perform error injection testing, a general protection fault may occur: mce: [Hardware Error]: Machine check events logged Oops: general protection fault ... ... Workqueue: events mce_gen_pool_process RIP: 0010:string+0x53/0xe0 ... Call Trace: <TASK> ? die_addr+0x37/0x90 ? exc_general_protection+0x1e7/0x3f0 ? asm_exc_general_protection+0x26/0x30 ? string+0x53/0xe0 vsnprintf+0x23e/0x4c0 snprintf+0x4d/0x70 skx_adxl_decode+0x16a/0x330 [skx_edac_common] skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common] skx_mce_check_error+0x17/0x20 [skx_edac_common] ... The issue arose was because the variable 'adxl_component_count' (inside skx_edac_common), which counts the ADXL components, was not reset. During the reloading of i10nm_edac, the count was incremented by the actual number of ADXL components again, resulting in a count that was double the real number of ADXL components. This led to an out-of-bounds reference to the ADXL component array, causing the general protection fault above. Fix this issue by resetting the 'adxl_component_count' in adxl_put(), which is called during the unloading of {skx,i10nm}_edac. | |||||
| CVE-2025-37940 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Add cond_resched() to ftrace_graph_set_hash() When the kernel contains a large number of functions that can be traced, the loop in ftrace_graph_set_hash() may take a lot of time to execute. This may trigger the softlockup watchdog. Add cond_resched() within the loop to allow the kernel to remain responsive even when processing a large number of functions. This matches the cond_resched() that is used in other locations of the code that iterates over all functions that can be traced. | |||||
| CVE-2025-37938 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Verify event formats that have "%*p.." The trace event verifier checks the formats of trace events to make sure that they do not point at memory that is not in the trace event itself or in data that will never be freed. If an event references data that was allocated when the event triggered and that same data is freed before the event is read, then the kernel can crash by reading freed memory. The verifier runs at boot up (or module load) and scans the print formats of the events and checks their arguments to make sure that dereferenced pointers are safe. If the format uses "%*p.." the verifier will ignore it, and that could be dangerous. Cover this case as well. Also add to the sample code a use case of "%*pbl". | |||||
| CVE-2025-37937 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds() If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result is a divide-by-zero. Prevent that from happening. Fixes the following warning with an UBSAN kernel: drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx() | |||||
| CVE-2025-37936 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value. When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE value. Consulting only the host kernel's host vs. guest masks results in running the guest with PEBS enabled even when the guest doesn't want to use PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply looking at exclude_host can't differentiate between events created by host userspace, and events created by KVM on behalf of the guest. Running the guest with PEBS unexpectedly enabled typically manifests as crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when trying to record PEBS events. The issue is most easily reproduced by running `perf kvm top` from before commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after which, `perf kvm top` effectively stopped using PEBS). The userspace side of perf creates a guest-only PEBS event, which intel_guest_get_msrs() misconstrues a guest-*owned* PEBS event. Arguably, this is a userspace bug, as enabling PEBS on guest-only events simply cannot work, and userspace can kill VMs in many other ways (there is no danger to the host). However, even if this is considered to be bad userspace behavior, there's zero downside to perf/KVM restricting PEBS to guest-owned events. Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily in two rare situations") fixed the case where host userspace is profiling KVM *and* userspace, but missed the case where userspace is profiling only KVM. | |||||
| CVE-2025-37932 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: sch_htb: make htb_qlen_notify() idempotent htb_qlen_notify() always deactivates the HTB class and in fact could trigger a warning if it is already deactivated. Therefore, it is not idempotent and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life. | |||||
| CVE-2025-37931 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: adjust subpage bit start based on sectorsize When running machines with 64k page size and a 16k nodesize we started seeing tree log corruption in production. This turned out to be because we were not writing out dirty blocks sometimes, so this in fact affects all metadata writes. When writing out a subpage EB we scan the subpage bitmap for a dirty range. If the range isn't dirty we do bit_start++; to move onto the next bit. The problem is the bitmap is based on the number of sectors that an EB has. So in this case, we have a 64k pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4 bits for every node. With a 64k page size we end up with 4 nodes per page. To make this easier this is how everything looks [0 16k 32k 48k ] logical address [0 4 8 12 ] radix tree offset [ 64k page ] folio [ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers [ | | | | | | | | | | | | | | | | ] bitmap Now we use all of our addressing based on fs_info->sectorsize_bits, so as you can see the above our 16k eb->start turns into radix entry 4. When we find a dirty range for our eb, we correctly do bit_start += sectors_per_node, because if we start at bit 0, the next bit for the next eb is 4, to correspond to eb->start 16k. However if our range is clean, we will do bit_start++, which will now put us offset from our radix tree entries. In our case, assume that the first time we check the bitmap the block is not dirty, we increment bit_start so now it == 1, and then we loop around and check again. This time it is dirty, and we go to find that start using the following equation start = folio_start + bit_start * fs_info->sectorsize; so in the case above, eb->start 0 is now dirty, and we calculate start as 0 + 1 * fs_info->sectorsize = 4096 4096 >> 12 = 1 Now we're looking up the radix tree for 1, and we won't find an eb. What's worse is now we're using bit_start == 1, so we do bit_start += sectors_per_node, which is now 5. If that eb is dirty we will run into the same thing, we will look at an offset that is not populated in the radix tree, and now we're skipping the writeout of dirty extent buffers. The best fix for this is to not use sectorsize_bits to address nodes, but that's a larger change. Since this is a fs corruption problem fix it simply by always using sectors_per_node to increment the start bit. | |||||
| CVE-2025-38347 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on ino and xnid syzbot reported a f2fs bug as below: INFO: task syz-executor140:5308 blocked for more than 143 seconds. Not tainted 6.14.0-rc7-syzkaller-00069-g81e4f8d68c66 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor140 state:D stack:24016 pid:5308 tgid:5308 ppid:5306 task_flags:0x400140 flags:0x00000006 Call Trace: <TASK> context_switch kernel/sched/core.c:5378 [inline] __schedule+0x190e/0x4c90 kernel/sched/core.c:6765 __schedule_loop kernel/sched/core.c:6842 [inline] schedule+0x14b/0x320 kernel/sched/core.c:6857 io_schedule+0x8d/0x110 kernel/sched/core.c:7690 folio_wait_bit_common+0x839/0xee0 mm/filemap.c:1317 __folio_lock mm/filemap.c:1664 [inline] folio_lock include/linux/pagemap.h:1163 [inline] __filemap_get_folio+0x147/0xb40 mm/filemap.c:1917 pagecache_get_page+0x2c/0x130 mm/folio-compat.c:87 find_get_page_flags include/linux/pagemap.h:842 [inline] f2fs_grab_cache_page+0x2b/0x320 fs/f2fs/f2fs.h:2776 __get_node_page+0x131/0x11b0 fs/f2fs/node.c:1463 read_xattr_block+0xfb/0x190 fs/f2fs/xattr.c:306 lookup_all_xattrs fs/f2fs/xattr.c:355 [inline] f2fs_getxattr+0x676/0xf70 fs/f2fs/xattr.c:533 __f2fs_get_acl+0x52/0x870 fs/f2fs/acl.c:179 f2fs_acl_create fs/f2fs/acl.c:375 [inline] f2fs_init_acl+0xd7/0x9b0 fs/f2fs/acl.c:418 f2fs_init_inode_metadata+0xa0f/0x1050 fs/f2fs/dir.c:539 f2fs_add_inline_entry+0x448/0x860 fs/f2fs/inline.c:666 f2fs_add_dentry+0xba/0x1e0 fs/f2fs/dir.c:765 f2fs_do_add_link+0x28c/0x3a0 fs/f2fs/dir.c:808 f2fs_add_link fs/f2fs/f2fs.h:3616 [inline] f2fs_mknod+0x2e8/0x5b0 fs/f2fs/namei.c:766 vfs_mknod+0x36d/0x3b0 fs/namei.c:4191 unix_bind_bsd net/unix/af_unix.c:1286 [inline] unix_bind+0x563/0xe30 net/unix/af_unix.c:1379 __sys_bind_socket net/socket.c:1817 [inline] __sys_bind+0x1e4/0x290 net/socket.c:1848 __do_sys_bind net/socket.c:1853 [inline] __se_sys_bind net/socket.c:1851 [inline] __x64_sys_bind+0x7a/0x90 net/socket.c:1851 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Let's dump and check metadata of corrupted inode, it shows its xattr_nid is the same to its i_ino. dump.f2fs -i 3 chaseyu.img.raw i_xattr_nid [0x 3 : 3] So that, during mknod in the corrupted directory, it tries to get and lock inode page twice, result in deadlock. - f2fs_mknod - f2fs_add_inline_entry - f2fs_get_inode_page --- lock dir's inode page - f2fs_init_acl - f2fs_acl_create(dir,..) - __f2fs_get_acl - f2fs_getxattr - lookup_all_xattrs - __get_node_page --- try to lock dir's inode page In order to fix this, let's add sanity check on ino and xnid. | |||||
| CVE-2025-38332 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Use memcpy() for BIOS version The strlcat() with FORTIFY support is triggering a panic because it thinks the target buffer will overflow although the correct target buffer size is passed in. Anyway, instead of memset() with 0 followed by a strlcat(), just use memcpy() and ensure that the resulting buffer is NULL terminated. BIOSVersion is only used for the lpfc_printf_log() which expects a properly terminated string. | |||||
| CVE-2025-38331 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Use TOE/TSO on all TCP It is desireable to push the hardware accelerator to also process non-segmented TCP frames: we pass the skb->len to the "TOE/TSO" offloader and it will handle them. Without this quirk the driver becomes unstable and lock up and and crash. I do not know exactly why, but it is probably due to the TOE (TCP offload engine) feature that is coupled with the segmentation feature - it is not possible to turn one part off and not the other, either both TOE and TSO are active, or neither of them. Not having the TOE part active seems detrimental, as if that hardware feature is not really supposed to be turned off. The datasheet says: "Based on packet parsing and TCP connection/NAT table lookup results, the NetEngine puts the packets belonging to the same TCP connection to the same queue for the software to process. The NetEngine puts incoming packets to the buffer or series of buffers for a jumbo packet. With this hardware acceleration, IP/TCP header parsing, checksum validation and connection lookup are offloaded from the software processing." After numerous tests with the hardware locking up after something between minutes and hours depending on load using iperf3 I have concluded this is necessary to stabilize the hardware. | |||||
| CVE-2025-38326 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: aoe: clean device rq_list in aoedev_downdev() An aoe device's rq_list contains accepted block requests that are waiting to be transmitted to the aoe target. This queue was added as part of the conversion to blk_mq. However, the queue was not cleaned out when an aoe device is downed which caused blk_mq_freeze_queue() to sleep indefinitely waiting for those requests to complete, causing a hang. This fix cleans out the queue before calling blk_mq_freeze_queue(). | |||||
| CVE-2025-38324 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mpls: Use rcu_dereference_rtnl() in mpls_route_input_rcu(). As syzbot reported [0], mpls_route_input_rcu() can be called from mpls_getroute(), where is under RTNL. net->mpls.platform_label is only updated under RTNL. Let's use rcu_dereference_rtnl() in mpls_route_input_rcu() to silence the splat. [0]: WARNING: suspicious RCU usage 6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 Not tainted ---------------------------- net/mpls/af_mpls.c:84 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz.2.4451/17730: #0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock net/core/rtnetlink.c:80 [inline] #0: ffffffff9012a3e8 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg+0x371/0xe90 net/core/rtnetlink.c:6961 stack backtrace: CPU: 1 UID: 0 PID: 17730 Comm: syz.2.4451 Not tainted 6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120 lockdep_rcu_suspicious+0x166/0x260 kernel/locking/lockdep.c:6865 mpls_route_input_rcu+0x1d4/0x200 net/mpls/af_mpls.c:84 mpls_getroute+0x621/0x1ea0 net/mpls/af_mpls.c:2381 rtnetlink_rcv_msg+0x3c9/0xe90 net/core/rtnetlink.c:6964 netlink_rcv_skb+0x16d/0x440 net/netlink/af_netlink.c:2534 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa98/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 __sys_sendmmsg+0x200/0x420 net/socket.c:2709 __do_sys_sendmmsg net/socket.c:2736 [inline] __se_sys_sendmmsg net/socket.c:2733 [inline] __x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2733 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x230 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0a2818e969 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f0a28f52038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f0a283b5fa0 RCX: 00007f0a2818e969 RDX: 0000000000000003 RSI: 0000200000000080 RDI: 0000000000000003 RBP: 00007f0a28210ab1 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f0a283b5fa0 R15: 00007ffce5e9f268 </TASK> | |||||
| CVE-2025-38323 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: atm: add lec_mutex syzbot found its way in net/atm/lec.c, and found an error path in lecd_attach() could leave a dangling pointer in dev_lec[]. Add a mutex to protect dev_lecp[] uses from lecd_attach(), lec_vcc_attach() and lec_mcast_attach(). Following patch will use this mutex for /proc/net/atm/lec. BUG: KASAN: slab-use-after-free in lecd_attach net/atm/lec.c:751 [inline] BUG: KASAN: slab-use-after-free in lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008 Read of size 8 at addr ffff88807c7b8e68 by task syz.1.17/6142 CPU: 1 UID: 0 PID: 6142 Comm: syz.1.17 Not tainted 6.16.0-rc1-syzkaller-00239-g08215f5486ec #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xcd/0x680 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 lecd_attach net/atm/lec.c:751 [inline] lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 6132: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4328 [inline] __kvmalloc_node_noprof+0x27b/0x620 mm/slub.c:5015 alloc_netdev_mqs+0xd2/0x1570 net/core/dev.c:11711 lecd_attach net/atm/lec.c:737 [inline] lane_ioctl+0x17db/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6132: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x51/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x2b4/0x4d0 mm/slub.c:4842 free_netdev+0x6c5/0x910 net/core/dev.c:11892 lecd_attach net/atm/lec.c:744 [inline] lane_ioctl+0x1ce8/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 | |||||
| CVE-2025-38322 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix crash in icl_update_topdown_event() The perf_fuzzer found a hard-lockup crash on a RaptorLake machine: Oops: general protection fault, maybe for address 0xffff89aeceab400: 0000 CPU: 23 UID: 0 PID: 0 Comm: swapper/23 Tainted: [W]=WARN Hardware name: Dell Inc. Precision 9660/0VJ762 RIP: 0010:native_read_pmc+0x7/0x40 Code: cc e8 8d a9 01 00 48 89 03 5b cd cc cc cc cc 0f 1f ... RSP: 000:fffb03100273de8 EFLAGS: 00010046 .... Call Trace: <TASK> icl_update_topdown_event+0x165/0x190 ? ktime_get+0x38/0xd0 intel_pmu_read_event+0xf9/0x210 __perf_event_read+0xf9/0x210 CPUs 16-23 are E-core CPUs that don't support the perf metrics feature. The icl_update_topdown_event() should not be invoked on these CPUs. It's a regression of commit: f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read") The bug introduced by that commit is that the is_topdown_event() function is mistakenly used to replace the is_topdown_count() call to check if the topdown functions for the perf metrics feature should be invoked. Fix it. | |||||
| CVE-2025-38320 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth() KASAN reports a stack-out-of-bounds read in regs_get_kernel_stack_nth(). Call Trace: [ 97.283505] BUG: KASAN: stack-out-of-bounds in regs_get_kernel_stack_nth+0xa8/0xc8 [ 97.284677] Read of size 8 at addr ffff800089277c10 by task 1.sh/2550 [ 97.285732] [ 97.286067] CPU: 7 PID: 2550 Comm: 1.sh Not tainted 6.6.0+ #11 [ 97.287032] Hardware name: linux,dummy-virt (DT) [ 97.287815] Call trace: [ 97.288279] dump_backtrace+0xa0/0x128 [ 97.288946] show_stack+0x20/0x38 [ 97.289551] dump_stack_lvl+0x78/0xc8 [ 97.290203] print_address_description.constprop.0+0x84/0x3c8 [ 97.291159] print_report+0xb0/0x280 [ 97.291792] kasan_report+0x84/0xd0 [ 97.292421] __asan_load8+0x9c/0xc0 [ 97.293042] regs_get_kernel_stack_nth+0xa8/0xc8 [ 97.293835] process_fetch_insn+0x770/0xa30 [ 97.294562] kprobe_trace_func+0x254/0x3b0 [ 97.295271] kprobe_dispatcher+0x98/0xe0 [ 97.295955] kprobe_breakpoint_handler+0x1b0/0x210 [ 97.296774] call_break_hook+0xc4/0x100 [ 97.297451] brk_handler+0x24/0x78 [ 97.298073] do_debug_exception+0xac/0x178 [ 97.298785] el1_dbg+0x70/0x90 [ 97.299344] el1h_64_sync_handler+0xcc/0xe8 [ 97.300066] el1h_64_sync+0x78/0x80 [ 97.300699] kernel_clone+0x0/0x500 [ 97.301331] __arm64_sys_clone+0x70/0x90 [ 97.302084] invoke_syscall+0x68/0x198 [ 97.302746] el0_svc_common.constprop.0+0x11c/0x150 [ 97.303569] do_el0_svc+0x38/0x50 [ 97.304164] el0_svc+0x44/0x1d8 [ 97.304749] el0t_64_sync_handler+0x100/0x130 [ 97.305500] el0t_64_sync+0x188/0x190 [ 97.306151] [ 97.306475] The buggy address belongs to stack of task 1.sh/2550 [ 97.307461] and is located at offset 0 in frame: [ 97.308257] __se_sys_clone+0x0/0x138 [ 97.308910] [ 97.309241] This frame has 1 object: [ 97.309873] [48, 184) 'args' [ 97.309876] [ 97.310749] The buggy address belongs to the virtual mapping at [ 97.310749] [ffff800089270000, ffff800089279000) created by: [ 97.310749] dup_task_struct+0xc0/0x2e8 [ 97.313347] [ 97.313674] The buggy address belongs to the physical page: [ 97.314604] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14f69a [ 97.315885] flags: 0x15ffffe00000000(node=1|zone=2|lastcpupid=0xfffff) [ 97.316957] raw: 015ffffe00000000 0000000000000000 dead000000000122 0000000000000000 [ 97.318207] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 97.319445] page dumped because: kasan: bad access detected [ 97.320371] [ 97.320694] Memory state around the buggy address: [ 97.321511] ffff800089277b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 97.322681] ffff800089277b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 97.323846] >ffff800089277c00: 00 00 f1 f1 f1 f1 f1 f1 00 00 00 00 00 00 00 00 [ 97.325023] ^ [ 97.325683] ffff800089277c80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3 [ 97.326856] ffff800089277d00: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 This issue seems to be related to the behavior of some gcc compilers and was also fixed on the s390 architecture before: commit d93a855c31b7 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()") As described in that commit, regs_get_kernel_stack_nth() has confirmed that `addr` is on the stack, so reading the value at `*addr` should be allowed. Use READ_ONCE_NOCHECK() helper to silence the KASAN check for this case. [will: Use '*addr' as the argument to READ_ONCE_NOCHECK()] | |||||