Filtered by vendor Linux
Subscribe
Total
19073 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53355 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: net: rds: clear i_sends on setup unwind The RDS IB connection teardown path is written so it can run during partial startup and on repeated shutdown attempts. It uses NULL pointers to distinguish resources that are still owned from resources that have already been released. When rds_ib_setup_qp() fails after allocating i_sends but before allocating i_recvs, the sends_out path frees i_sends without clearing the pointer. A later shutdown pass can still treat that stale pointer as a live send ring allocation. Clear i_sends after vfree() in the error unwind path so the existing shutdown logic continues to use the correct ownership state. | |||||
| CVE-2026-53356 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix phys BO pread/pwrite with offset sg_page() returns struct page pointer not (void *) so the scaling of pread/pwrite is wrong for phys BO and wrong parts of BO would be accessed if non-zero offset is used. Last impacted platform with overlay or cursor planes using phys mapping was Gen3/945G/Lakeport. (cherry picked from commit 3e49a2f85070b2fb672c1e0fdba281a4ea3aebe6) | |||||
| CVE-2026-8036 | 3 Linux, Microsoft, Ni | 4 Linux Kernel, Windows, Linux Real-time and 1 more | 2026-07-22 | N/A | 7.1 HIGH |
| Improper input validation in NI-PAL may allow a local authenticated user to access arbitrary system memory, potentially leading to privilege escalation. This vulnerability affects NI-PAL 26.3.0 and prior versions on Windows and Linux. | |||||
| CVE-2025-71314 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Recover from panthor_gpu_flush_caches() failures We have seen a few cases where the whole memory subsystem is blocked and flush operations never complete. When that happens, we want to: - schedule a reset, so we can recover from this situation - in the reset path, we need to reset the pending_reqs so we can send new commands after the reset - if more panthor_gpu_flush_caches() operations are queued after the timeout, we skip them and return -EIO directly to avoid needless waits (the memory block won't miraculously work again) Note that we drop the WARN_ON()s because these hangs can be triggered with buggy GPU jobs created by the UMD, and there's no way we can prevent it. We do keep the error messages though. v2: - New patch v3: - Collect R-b - Explicitly mention the fact we dropped the WARN_ON()s in the commit message v4: - No changes | |||||
| CVE-2025-71313 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Add missing NULL check for alloc_workqueue() alloc_workqueue() can return NULL on memory allocation failure. Without proper error checking, this may lead to a NULL pointer dereference when queue_work() is later called with the NULL workqueue pointer in epf_ntb_epc_init(). Add a NULL check immediately after alloc_workqueue() and return -ENOMEM on failure to prevent the driver from loading with an invalid workqueue pointer. | |||||
| CVE-2026-8035 | 3 Linux, Microsoft, Ni | 4 Linux Kernel, Windows, Linux Real-time and 1 more | 2026-07-22 | N/A | 7.1 HIGH |
| Improper input validation in the NI-PAL kernel driver may allow a local authenticated user to cause a denial of service by triggering a crash due to a NULL pointer dereference. This vulnerability affects NI-PAL 26.3.0 and prior versions on Windows and Linux. | |||||
| CVE-2026-53358 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen() l2cap_chan_close() removes the channel from conn->chan_l, which must be done under conn->lock. cleanup_listen() runs under the parent sk_lock, so acquiring conn->lock would invert the established conn->lock -> chan->lock -> sk_lock order. Instead of calling l2cap_chan_close() directly, schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously. The timeout handler already acquires conn->lock and chan->lock in the correct order. The timer is only armed when chan->conn is still set: if it is already NULL, l2cap_conn_del() has already processed this channel (l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb), so there is nothing left to do. If l2cap_conn_del() races in after the timer is armed, __clear_chan_timer() inside l2cap_chan_del() cancels it; if the timer has already fired, the handler returns harmlessly because chan->conn was cleared. | |||||
| CVE-2026-53360 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use As per the GHCB spec, when using GHCB v2+ require the software scratch area to reside in the GHCB's shared buffer. Note, things like Page State Change (PSC) requests _rely_ on this behavior, as the guest can't provide a length when making the request, i.e. the size of the guest payload is bounded by the size of the shared buffer. Failure to force usage of the GHCB, and a slew of other flaws, lets a malicious SNP guest corrupt host kernel heap memory, and leak host heap layout information. setup_vmgexit_scratch() allocates a buffer via kvzalloc(exit_info_2), where exit_info_2 is guest-controlled. With exit_info_2=24, this yields a 24-byte allocation in kmalloc-cg-32 (32-byte slab objects). The buffer holds an 8-byte psc_hdr followed by 8-byte psc_entry structs, so only entries[0] and entries[1] are in-bounds. snp_begin_psc() validates end_entry against VMGEXIT_PSC_MAX_COUNT (253) but NOT against the actual buffer size: idx_end = hdr->end_entry; if (idx_end >= VMGEXIT_PSC_MAX_COUNT) { // checks 253, not buffer snp_complete_psc(svm, ...); return 1; } for (idx = idx_start; idx <= idx_end; idx++) { entry_start = entries[idx]; // OOB when idx >= 2 The guest sets end_entry=10+, causing the host to iterate entries[2+] which are OOB into adjacent slab objects. For each OOB entry: - The host reads 8 bytes (OOB READ / info leak oracle) - If the data passes PSC validation, __snp_complete_one_psc() writes cur_page = 1 or 512 into the entry (OOB WRITE, sev.c:3806) - If validation fails, the error response reveals whether adjacent memory is zero vs non-zero (information disclosure to guest) The guest controls allocation size (exit_info_2), entry range (cur_entry/end_entry), and can fire unlimited VMGEXITs to repeatedly hit different slab positions. By exploiting the variety of bugs, a malicious SEV-SNP guest can: - OOB read adjacent kmalloc-cg-32 objects (heap layout disclosure) - OOB write cur_page bits into adjacent objects (heap corruption) - Trigger use-after-free conditions across VMGEXITs E.g. with KASAN enabled, a single insmod of the PoC guest module produces 73 KASAN reports: BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x126/0x890 Read of size 8 at addr ffff888219ffb5e0 by task qemu-system-x86/2199 BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x468/0x890 Write of size 8 at addr ffff888351566648 by task qemu-system-x86/2199 The buggy address belongs to the object at ffff888XXXXXXXXX which belongs to the cache kmalloc-cg-32 of size 32 The buggy address is located N bytes to the right of allocated 32-byte region [ffff888XXXXXXXXX, ffff888XXXXXXXXX) Breakdown: 62 slab-out-of-bounds (reads + writes past allocation) 7 slab-use-after-free 4 use-after-free All credit to Stan for the wonderful description and reproducer! [sean: write changelog] | |||||
| CVE-2026-53361 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Set gc_in_progress to true in unix_gc(). Igor Ushakov reported that unix_gc() could run with gc_in_progress being false if the work is scheduled while running: Thread 1 Thread 2 Thread 3 -------- -------- -------- unix_schedule_gc() unix_schedule_gc() `- if (!gc_in_progress) `- if (!gc_in_progress) |- gc_in_progress = true | `- queue_work() | unix_gc() <----------------/ | | |- gc_in_progress = true ... `- queue_work() | | `- gc_in_progress = false | | unix_gc() <---------------------------------------------' | ... /* gc_in_progress == false */ | `- gc_in_progress = false unix_peek_fpl() relies on gc_in_progress not to confuse GC by MSG_PEEK. Let's set gc_in_progress to true in unix_gc(). | |||||
| CVE-2026-53363 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags() iptfs_consume_frags() transfers paged fragments from one socket buffer to another but fails to propagate the SKBFL_SHARED_FRAG flag. This is the same class of bug that was fixed in skb_try_coalesce() for CVE-2026-46300: when fragments backed by read-only page-cache pages are merged, the marker indicating their shared nature must be preserved so that ESP can decide correctly whether in-place encryption is safe. Apply the same two-line fix used in skb_try_coalesce() to iptfs_consume_frags(). | |||||
| CVE-2026-53357 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 8.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() bt_accept_dequeue() unlinks a not-yet-accepted child from the parent accept queue and release_sock()s it before returning, so the returned sk has no caller reference and is unlocked. l2cap_sock_cleanup_listen() walks these children on listening-socket close. A concurrent HCI disconnect drives hci_rx_work -> l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and frees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the accept_q list/poll and takes temporary refs inside bt_accept_dequeue(), and CVE-2025-39860 serialises the userspace close()/accept() race by calling cleanup_listen() under lock_sock() in l2cap_sock_release(). Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF still reproduces on current bluetooth/master. Take the reference at the source: bt_accept_dequeue() does sock_hold() while sk is still locked, before release_sock(); callers sock_put(). cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under the parent sk lock and that would invert conn->lock -> chan->lock -> sk_lock (lockdep). KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced 12 use-after-free reports per run before this change; 0, and no lockdep report, over 1600+ raced iterations after it on bluetooth/master. | |||||
| CVE-2023-3390 | 2 Linux, Netapp | 6 Linux Kernel, H300s, H410c and 3 more | 2026-07-22 | N/A | 7.8 HIGH |
| A use-after-free vulnerability was found in the Linux kernel's netfilter subsystem in net/netfilter/nf_tables_api.c. Mishandled error handling with NFT_MSG_NEWRULE makes it possible to use a dangling pointer in the same transaction causing a use-after-free vulnerability. This flaw allows a local attacker with user access to cause a privilege escalation issue. We recommend upgrading past commit 1240eb93f0616b21c675416516ff3d74798fdc97 | |||||
| CVE-2024-0639 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-07-21 | N/A | 5.5 MEDIUM |
| A denial of service vulnerability due to a deadlock was found in sctp_auto_asconf_init in net/sctp/socket.c in the Linux kernel’s SCTP subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system. | |||||
| CVE-2024-0443 | 3 Fedoraproject, Linux, Redhat | 3 Fedora, Linux Kernel, Enterprise Linux | 2026-07-21 | N/A | 5.5 MEDIUM |
| A flaw was found in the blkgs destruction path in block/blk-cgroup.c in the Linux kernel, leading to a cgroup blkio memory leakage problem. When a cgroup is being destroyed, cgroup_rstat_flush() is only called at css_release_work_fn(), which is called when the blkcg reference count reaches 0. This circular dependency will prevent blkcg and some blkgs from being freed after they are made offline. This issue may allow an attacker with a local access to cause system instability, such as an out of memory error. | |||||
| CVE-2023-3640 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-07-21 | N/A | 7.0 HIGH |
| A possible unauthorized memory access flaw was found in the Linux kernel's cpu_entry_area mapping of X86 CPU data to memory, where a user may guess the location of exception stacks or other important data. Based on the previous CVE-2023-0597, the 'Randomize per-cpu entry area' feature was implemented in /arch/x86/mm/cpu_entry_area.c, which works through the init_cea_offsets() function when KASLR is enabled. However, despite this feature, there is still a risk of per-cpu entry area leaks. This issue could allow a local user to gain access to some important data with memory in an expected location and potentially escalate their privileges on the system. | |||||
| CVE-2026-23435 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86: Move event pointer setup earlier in x86_pmu_enable() A production AMD EPYC system crashed with a NULL pointer dereference in the PMU NMI handler: BUG: kernel NULL pointer dereference, address: 0000000000000198 RIP: x86_perf_event_update+0xc/0xa0 Call Trace: <NMI> amd_pmu_v2_handle_irq+0x1a6/0x390 perf_event_nmi_handler+0x24/0x40 The faulting instruction is `cmpq $0x0, 0x198(%rdi)` with RDI=0, corresponding to the `if (unlikely(!hwc->event_base))` check in x86_perf_event_update() where hwc = &event->hw and event is NULL. drgn inspection of the vmcore on CPU 106 showed a mismatch between cpuc->active_mask and cpuc->events[]: active_mask: 0x1e (bits 1, 2, 3, 4) events[1]: 0xff1100136cbd4f38 (valid) events[2]: 0x0 (NULL, but active_mask bit 2 set) events[3]: 0xff1100076fd2cf38 (valid) events[4]: 0xff1100079e990a90 (valid) The event that should occupy events[2] was found in event_list[2] with hw.idx=2 and hw.state=0x0, confirming x86_pmu_start() had run (which clears hw.state and sets active_mask) but events[2] was never populated. Another event (event_list[0]) had hw.state=0x7 (STOPPED|UPTODATE|ARCH), showing it was stopped when the PMU rescheduled events, confirming the throttle-then-reschedule sequence occurred. The root cause is commit 7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss") which moved the cpuc->events[idx] assignment out of x86_pmu_start() and into step 2 of x86_pmu_enable(), after the PERF_HES_ARCH check. This broke any path that calls pmu->start() without going through x86_pmu_enable() -- specifically the unthrottle path: perf_adjust_freq_unthr_events() -> perf_event_unthrottle_group() -> perf_event_unthrottle() -> event->pmu->start(event, 0) -> x86_pmu_start() // sets active_mask but not events[] The race sequence is: 1. A group of perf events overflows, triggering group throttle via perf_event_throttle_group(). All events are stopped: active_mask bits cleared, events[] preserved (x86_pmu_stop no longer clears events[] after commit 7e772a93eb61). 2. While still throttled (PERF_HES_STOPPED), x86_pmu_enable() runs due to other scheduling activity. Stopped events that need to move counters get PERF_HES_ARCH set and events[old_idx] cleared. In step 2 of x86_pmu_enable(), PERF_HES_ARCH causes these events to be skipped -- events[new_idx] is never set. 3. The timer tick unthrottles the group via pmu->start(). Since commit 7e772a93eb61 removed the events[] assignment from x86_pmu_start(), active_mask[new_idx] is set but events[new_idx] remains NULL. 4. A PMC overflow NMI fires. The handler iterates active counters, finds active_mask[2] set, reads events[2] which is NULL, and crashes dereferencing it. Move the cpuc->events[hwc->idx] assignment in x86_pmu_enable() to before the PERF_HES_ARCH check, so that events[] is populated even for events that are not immediately started. This ensures the unthrottle path via pmu->start() always finds a valid event pointer. | |||||
| CVE-2026-23425 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix ID register initialization for non-protected pKVM guests In protected mode, the hypervisor maintains a separate instance of the `kvm` structure for each VM. For non-protected VMs, this structure is initialized from the host's `kvm` state. Currently, `pkvm_init_features_from_host()` copies the `KVM_ARCH_FLAG_ID_REGS_INITIALIZED` flag from the host without the underlying `id_regs` data being initialized. This results in the hypervisor seeing the flag as set while the ID registers remain zeroed. Consequently, `kvm_has_feat()` checks at EL2 fail (return 0) for non-protected VMs. This breaks logic that relies on feature detection, such as `ctxt_has_tcrx()` for TCR2_EL1 support. As a result, certain system registers (e.g., TCR2_EL1, PIR_EL1, POR_EL1) are not saved/restored during the world switch, which could lead to state corruption. Fix this by explicitly copying the ID registers from the host `kvm` to the hypervisor `kvm` for non-protected VMs during initialization, since we trust the host with its non-protected guests' features. Also ensure `KVM_ARCH_FLAG_ID_REGS_INITIALIZED` is cleared initially in `pkvm_init_features_from_host` so that `vm_copy_id_regs` can properly initialize them and set the flag once done. | |||||
| CVE-2026-31392 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A | 8.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix krb5 mount with username option Customer reported that some of their krb5 mounts were failing against a single server as the client was trying to mount the shares with wrong credentials. It turned out the client was reusing SMB session from first mount to try mounting the other shares, even though a different username= option had been specified to the other mounts. By using username mount option along with sec=krb5 to search for principals from keytab is supported by cifs.upcall(8) since cifs-utils-4.8. So fix this by matching username mount option in match_session() even with Kerberos. For example, the second mount below should fail with -ENOKEY as there is no 'foobar' principal in keytab (/etc/krb5.keytab). The client ends up reusing SMB session from first mount to perform the second one, which is wrong. ``` $ ktutil ktutil: add_entry -password -p testuser -k 1 -e aes256-cts Password for testuser@ZELDA.TEST: ktutil: write_kt /etc/krb5.keytab ktutil: quit $ klist -ke Keytab name: FILE:/etc/krb5.keytab KVNO Principal ---- ---------------------------------------------------------------- 1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96) $ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser $ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar $ mount -t cifs | grep -Po 'username=\K\w+' testuser testuser ``` | |||||
| CVE-2026-53094 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stale offload->prog pointer after constant blinding When a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoes JIT compilation with constant blinding enabled (bpf_jit_harden >= 2), bpf_jit_blind_constants() clones the program. The original prog is then freed in bpf_jit_prog_release_other(), which updates aux->prog to point to the surviving clone, but fails to update offload->prog. This leaves offload->prog pointing to the freed original program. When the network namespace is subsequently destroyed, cleanup_net() triggers bpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls __bpf_prog_offload_destroy(offload->prog). Accessing the freed prog causes a page fault: BUG: unable to handle page fault for address: ffffc900085f1038 Workqueue: netns cleanup_net RIP: 0010:__bpf_prog_offload_destroy+0xc/0x80 Call Trace: __bpf_offload_dev_netdev_unregister+0x257/0x350 bpf_dev_bound_netdev_unregister+0x4a/0x90 unregister_netdevice_many_notify+0x2a2/0x660 ... cleanup_net+0x21a/0x320 The test sequence that triggers this reliably is: 1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden) 2. Run xdp_metadata selftest, which creates a dev-bound-only XDP program on a veth inside a netns (./test_progs -t xdp_metadata) 3. cleanup_net -> page fault in __bpf_prog_offload_destroy Dev-bound-only programs are unique in that they have an offload structure but go through the normal JIT path instead of bpf_prog_offload_compile(). This means they are subject to constant blinding's prog clone-and-replace, while also having offload->prog that must stay in sync. Fix this by updating offload->prog in bpf_jit_prog_release_other(), alongside the existing aux->prog update. Both are back-pointers to the prog that must be kept in sync when the prog is replaced. | |||||
| CVE-2026-53095 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix abuse of kprobe_write_ctx via freplace uprobe programs are allowed to modify struct pt_regs. Since the actual program type of uprobe is KPROBE, it can be abused to modify struct pt_regs via kprobe+freplace when the kprobe attaches to kernel functions. For example, SEC("?kprobe") int kprobe(struct pt_regs *regs) { return 0; } SEC("?freplace") int freplace_kprobe(struct pt_regs *regs) { regs->di = 0; return 0; } freplace_kprobe prog will attach to kprobe prog. kprobe prog will attach to a kernel function. Without this patch, when the kernel function runs, its first arg will always be set as 0 via the freplace_kprobe prog. To fix the abuse of kprobe_write_ctx=true via kprobe+freplace, disallow attaching freplace programs on kprobe programs with different kprobe_write_ctx values. | |||||