Total
34322 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-9552 | 1 Synchronize Composer.json With Contrib Modules Project | 1 Synchronize Composer.json With Contrib Modules | 2026-01-05 | N/A | 5.3 MEDIUM |
| Vulnerability in Drupal Synchronize composer.Json With Contrib Modules.This issue affects Synchronize composer.Json With Contrib Modules: *.*. | |||||
| CVE-2024-50191 | 1 Linux | 1 Linux Kernel | 2026-01-05 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't set SB_RDONLY after filesystem errors When the filesystem is mounted with errors=remount-ro, we were setting SB_RDONLY flag to stop all filesystem modifications. We knew this misses proper locking (sb->s_umount) and does not go through proper filesystem remount procedure but it has been the way this worked since early ext2 days and it was good enough for catastrophic situation damage mitigation. Recently, syzbot has found a way (see link) to trigger warnings in filesystem freezing because the code got confused by SB_RDONLY changing under its hands. Since these days we set EXT4_FLAGS_SHUTDOWN on the superblock which is enough to stop all filesystem modifications, modifying SB_RDONLY shouldn't be needed. So stop doing that. | |||||
| CVE-2024-46823 | 1 Linux | 1 Linux Kernel | 2026-01-05 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: kunit/overflow: Fix UB in overflow_allocation_test The 'device_name' array doesn't exist out of the 'overflow_allocation_test' function scope. However, it is being used as a driver name when calling 'kunit_driver_create' from 'kunit_device_register'. It produces the kernel panic with KASAN enabled. Since this variable is used in one place only, remove it and pass the device name into kunit_device_register directly as an ascii string. | |||||
| CVE-2024-41068 | 1 Linux | 1 Linux Kernel | 2026-01-05 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Fix sclp_init() cleanup on failure If sclp_init() fails it only partially cleans up: if there are multiple failing calls to sclp_init() sclp_state_change_event will be added several times to sclp_reg_list, which results in the following warning: ------------[ cut here ]------------ list_add double add: new=000003ffe1598c10, prev=000003ffe1598bf0, next=000003ffe1598c10. WARNING: CPU: 0 PID: 1 at lib/list_debug.c:35 __list_add_valid_or_report+0xde/0xf8 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc3 Krnl PSW : 0404c00180000000 000003ffe0d6076a (__list_add_valid_or_report+0xe2/0xf8) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 ... Call Trace: [<000003ffe0d6076a>] __list_add_valid_or_report+0xe2/0xf8 ([<000003ffe0d60766>] __list_add_valid_or_report+0xde/0xf8) [<000003ffe0a8d37e>] sclp_init+0x40e/0x450 [<000003ffe00009f2>] do_one_initcall+0x42/0x1e0 [<000003ffe15b77a6>] do_initcalls+0x126/0x150 [<000003ffe15b7a0a>] kernel_init_freeable+0x1ba/0x1f8 [<000003ffe0d6650e>] kernel_init+0x2e/0x180 [<000003ffe000301c>] __ret_from_fork+0x3c/0x60 [<000003ffe0d759ca>] ret_from_fork+0xa/0x30 Fix this by removing sclp_state_change_event from sclp_reg_list when sclp_init() fails. | |||||
| CVE-2024-26938 | 1 Linux | 1 Linux Kernel | 2026-01-05 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/bios: Tolerate devdata==NULL in intel_bios_encoder_supports_dp_dual_mode() If we have no VBT, or the VBT didn't declare the encoder in question, we won't have the 'devdata' for the encoder. Instead of oopsing just bail early. We won't be able to tell whether the port is DP++ or not, but so be it. (cherry picked from commit 26410896206342c8a80d2b027923e9ee7d33b733) | |||||
| CVE-2024-26845 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-05 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Add TMF to tmr_list handling An abort that is responded to by iSCSI itself is added to tmr_list but does not go to target core. A LUN_RESET that goes through tmr_list takes a refcounter on the abort and waits for completion. However, the abort will be never complete because it was not started in target core. Unable to locate ITT: 0x05000000 on CID: 0 Unable to locate RefTaskTag: 0x05000000 on CID: 0. wait_for_tasks: Stopping tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop wait for tasks: tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop ... INFO: task kworker/0:2:49 blocked for more than 491 seconds. task:kworker/0:2 state:D stack: 0 pid: 49 ppid: 2 flags:0x00000800 Workqueue: events target_tmr_work [target_core_mod] Call Trace: __switch_to+0x2c4/0x470 _schedule+0x314/0x1730 schedule+0x64/0x130 schedule_timeout+0x168/0x430 wait_for_completion+0x140/0x270 target_put_cmd_and_wait+0x64/0xb0 [target_core_mod] core_tmr_lun_reset+0x30/0xa0 [target_core_mod] target_tmr_work+0xc8/0x1b0 [target_core_mod] process_one_work+0x2d4/0x5d0 worker_thread+0x78/0x6c0 To fix this, only add abort to tmr_list if it will be handled by target core. | |||||
| CVE-2023-52476 | 1 Linux | 1 Linux Kernel | 2026-01-05 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/lbr: Filter vsyscall addresses We found that a panic can occur when a vsyscall is made while LBR sampling is active. If the vsyscall is interrupted (NMI) for perf sampling, this call sequence can occur (most recent at top): __insn_get_emulate_prefix() insn_get_emulate_prefix() insn_get_prefixes() insn_get_opcode() decode_branch_type() get_branch_type() intel_pmu_lbr_filter() intel_pmu_handle_irq() perf_event_nmi_handler() Within __insn_get_emulate_prefix() at frame 0, a macro is called: peek_nbyte_next(insn_byte_t, insn, i) Within this macro, this dereference occurs: (insn)->next_byte Inspecting registers at this point, the value of the next_byte field is the address of the vsyscall made, for example the location of the vsyscall version of gettimeofday() at 0xffffffffff600000. The access to an address in the vsyscall region will trigger an oops due to an unhandled page fault. To fix the bug, filtering for vsyscalls can be done when determining the branch type. This patch will return a "none" branch if a kernel address if found to lie in the vsyscall region. | |||||
| CVE-2025-64666 | 1 Microsoft | 1 Exchange Server | 2026-01-02 | N/A | 7.5 HIGH |
| Improper input validation in Microsoft Exchange Server allows an authorized attacker to elevate privileges over a network. | |||||
| CVE-2025-39753 | 1 Linux | 1 Linux Kernel | 2026-01-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Set .migrate_folio in gfs2_{rgrp,meta}_aops Clears up the warning added in 7ee3647243e5 ("migrate: Remove call to ->writepage") that occurs in various xfstests, causing "something found in dmesg" failures. [ 341.136573] gfs2_meta_aops does not implement migrate_folio [ 341.136953] WARNING: CPU: 1 PID: 36 at mm/migrate.c:944 move_to_new_folio+0x2f8/0x300 | |||||
| CVE-2025-22008 | 1 Linux | 1 Linux Kernel | 2026-01-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: regulator: check that dummy regulator has been probed before using it Due to asynchronous driver probing there is a chance that the dummy regulator hasn't already been probed when first accessing it. | |||||
| CVE-2025-21992 | 1 Linux | 1 Linux Kernel | 2026-01-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: HID: ignore non-functional sensor in HP 5MP Camera The HP 5MP Camera (USB ID 0408:5473) reports a HID sensor interface that is not actually implemented. Attempting to access this non-functional sensor via iio_info causes system hangs as runtime PM tries to wake up an unresponsive sensor. [453] hid-sensor-hub 0003:0408:5473.0003: Report latency attributes: ffffffff:ffffffff [453] hid-sensor-hub 0003:0408:5473.0003: common attributes: 5:1, 2:1, 3:1 ffffffff:ffffffff Add this device to the HID ignore list since the sensor interface is non-functional by design and should not be exposed to userspace. | |||||
| CVE-2025-21699 | 1 Linux | 1 Linux Kernel | 2026-01-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag: depending on that flag, the pages in the address space will either use buffer heads or iomap_folio_state structs, and we cannot mix the two. | |||||
| CVE-2024-29883 | 1 Miraheze | 1 Createwiki | 2026-01-02 | N/A | 4.9 MEDIUM |
| CreateWiki is Miraheze's MediaWiki extension for requesting & creating wikis. Suppression of wiki requests does not work as intended, and always restricts visibility to those with the `(createwiki)` user right regardless of the settings one sets on a given wiki request. This may expose information to users who are not supposed to be able to access it. | |||||
| CVE-2023-50257 | 1 Eprosima | 1 Fast Dds | 2026-01-02 | N/A | 9.6 CRITICAL |
| eProsima Fast DDS (formerly Fast RTPS) is a C++ implementation of the Data Distribution Service standard of the Object Management Group. Even with the application of SROS2, due to the issue where the data (`p[UD]`) and `guid` values used to disconnect between nodes are not encrypted, a vulnerability has been discovered where a malicious attacker can forcibly disconnect a Subscriber and can deny a Subscriber attempting to connect. Afterwards, if the attacker sends the packet for disconnecting, which is data (`p[UD]`), to the Global Data Space (`239.255.0.1:7400`) using the said Publisher ID, all the Subscribers (Listeners) connected to the Publisher (Talker) will not receive any data and their connection will be disconnected. Moreover, if this disconnection packet is sent continuously, the Subscribers (Listeners) trying to connect will not be able to do so. Since the initial commit of the `SecurityManager.cpp` code (`init`, `on_process_handshake`) on Nov 8, 2016, the Disconnect Vulnerability in RTPS Packets Used by SROS2 has been present prior to versions 2.13.0, 2.12.2, 2.11.3, 2.10.3, and 2.6.7. | |||||
| CVE-2025-68697 | 1 N8n | 1 N8n | 2025-12-31 | N/A | 7.1 HIGH |
| n8n is an open source workflow automation platform. Prior to version 2.0.0, in self-hosted n8n instances where the Code node runs in legacy (non-task-runner) JavaScript execution mode, authenticated users with workflow editing access can invoke internal helper functions from within the Code node. This allows a workflow editor to perform actions on the n8n host with the same privileges as the n8n process, including: reading files from the host filesystem (subject to any file-access restrictions configured on the instance and OS/container permissions), and writing files to the host filesystem (subject to the same restrictions). This issue has been patched in version 2.0.0. Workarounds for this issue involve limiting file operations by setting N8N_RESTRICT_FILE_ACCESS_TO to a dedicated directory (e.g., ~/.n8n-files) and ensure it contains no sensitive data, keeping N8N_BLOCK_FILE_ACCESS_TO_N8N_FILES=true (default) to block access to .n8n and user-defined config files, and disabling high-risk nodes (including the Code node) using NODES_EXCLUDE if workflow editors are not fully trusted. | |||||
| CVE-2024-47866 | 1 Redhat | 1 Ceph | 2025-12-31 | N/A | 7.5 HIGH |
| Ceph is a distributed object, block, and file storage platform. In versions up to and including 19.2.3, using the argument `x-amz-copy-source` to put an object and specifying an empty string as its content leads to the RGW daemon crashing, resulting in a DoS attack. As of time of publication, no known patched versions exist. | |||||
| CVE-2025-46331 | 1 Openfga | 2 Helm Charts, Openfga | 2025-12-31 | N/A | 9.8 CRITICAL |
| OpenFGA is a high-performance and flexible authorization/permission engine built for developers and inspired by Google Zanzibar. OpenFGA v1.8.10 to v1.3.6 (Helm chart <= openfga-0.2.28, docker <= v.1.8.10) are vulnerable to authorization bypass when certain Check and ListObject calls are executed. This issue has been patched in version 1.8.11. | |||||
| CVE-2025-59500 | 1 Microsoft | 1 Azure Notification Service | 2025-12-31 | N/A | 7.7 HIGH |
| Improper access control in Azure Notification Service allows an authorized attacker to elevate privileges over a network. | |||||
| CVE-2024-30146 | 1 Hcltech | 1 Domino Leap | 2025-12-31 | N/A | 4.1 MEDIUM |
| Improper access control of endpoint in HCL Domino Leap allows certain admin users to import applications from the server's filesystem. | |||||
| CVE-2024-33065 | 1 Qualcomm | 86 Aqt1000, Aqt1000 Firmware, Fastconnect 6200 and 83 more | 2025-12-31 | N/A | 8.4 HIGH |
| Memory corruption while taking snapshot when an offset variable is set by camera driver. | |||||