Total
73 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-22332 | 1 Ibm | 1 Partner Engagement Manager | 2026-06-17 | 5.0 MEDIUM | 7.5 HIGH |
| IBM Sterling Partner Engagement Manager 6.2.0 could allow an attacker to impersonate another user due to missing revocation mechanism for the JWT token. IBM X-Force ID: 219131. | |||||
| CVE-2022-22197 | 1 Juniper | 2 Junos, Junos Os Evolved | 2026-06-17 | 4.3 MEDIUM | 7.5 HIGH |
| An Operation on a Resource after Expiration or Release vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker with an established BGP session to cause a Denial of Service (DoS). This issue occurs when proxy-generate route-target filtering is enabled, and certain proxy-route add and delete events are happening. This issue affects: Juniper Networks Junos OS All versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S8, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S2, 20.3R2. Juniper Networks Junos OS Evolved All versions prior to 20.1R3-EVO; 20.2 versions prior to 20.2R3-EVO; 20.3 versions prior to 20.3R2-EVO. | |||||
| CVE-2021-47294 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netrom: Decrease sock refcount when sock timers expire Commit 63346650c1a9 ("netrom: switch to sock timer API") switched to use sock timer API. It replaces mod_timer() by sk_reset_timer(), and del_timer() by sk_stop_timer(). Function sk_reset_timer() will increase the refcount of sock if it is called on an inactive timer, hence, in case the timer expires, we need to decrease the refcount ourselves in the handler, otherwise, the sock refcount will be unbalanced and the sock will never be freed. | |||||
| CVE-2021-47069 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry do_mq_timedreceive calls wq_sleep with a stack local address. The sender (do_mq_timedsend) uses this address to later call pipelined_send. This leads to a very hard to trigger race where a do_mq_timedreceive call might return and leave do_mq_timedsend to rely on an invalid address, causing the following crash: RIP: 0010:wake_q_add_safe+0x13/0x60 Call Trace: __x64_sys_mq_timedsend+0x2a9/0x490 do_syscall_64+0x80/0x680 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5928e40343 The race occurs as: 1. do_mq_timedreceive calls wq_sleep with the address of `struct ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it holds a valid `struct ext_wait_queue *` as long as the stack has not been overwritten. 2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call __pipelined_op. 3. Sender calls __pipelined_op::smp_store_release(&this->state, STATE_READY). Here is where the race window begins. (`this` is `ewq_addr`.) 4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it will see `state == STATE_READY` and break. 5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's stack. (Although the address may not get overwritten until another function happens to touch it, which means it can persist around for an indefinite time.) 6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a `struct ext_wait_queue *`, and uses it to find a task_struct to pass to the wake_q_add_safe call. In the lucky case where nothing has overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct. In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a bogus address as the receiver's task_struct causing the crash. do_mq_timedsend::__pipelined_op() should not dereference `this` after setting STATE_READY, as the receiver counterpart is now free to return. Change __pipelined_op to call wake_q_add_safe on the receiver's task_struct returned by get_task_struct, instead of dereferencing `this` which sits on the receiver's stack. As Manfred pointed out, the race potentially also exists in ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare. Fix those in the same way. | |||||
| CVE-2021-37204 | 1 Siemens | 95 Simatic Drive Controller Cpu 1504d Tf, Simatic Drive Controller Cpu 1504d Tf Firmware, Simatic Drive Controller Cpu 1507d Tf and 92 more | 2026-06-17 | 7.1 HIGH | 7.5 HIGH |
| A vulnerability has been identified in SIMATIC Drive Controller family (All versions < V2.9.2), SIMATIC Drive Controller family (All versions >= V2.9.2 < V2.9.4), SIMATIC ET 200SP Open Controller CPU 1515SP PC (incl. SIPLUS variants) (All versions), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions < V21.9), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions >= V21.9 < V21.9.4), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 Ready4Linux (All versions), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions < V4.5.0), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions >= V4.5.0 < V4.5.2), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions < V2.9.2), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions >= V2.9.2 < V2.9.4), SIMATIC S7-1500 Software Controller (All versions < V21.9), SIMATIC S7-1500 Software Controller (All versions >= V21.9 < V21.9.4), SIMATIC S7-PLCSIM Advanced (All versions < V4.0), SIMATIC S7-PLCSIM Advanced (All versions >= V4.0 < V4.0 SP1), SIPLUS TIM 1531 IRC (All versions < V2.3.6), TIM 1531 IRC (All versions < V2.3.6). An unauthenticated attacker could cause a denial-of-service condition in a PLC when sending specially prepared packet over port 102/tcp. A restart of the affected device is needed to restore normal operations. | |||||
| CVE-2021-37185 | 1 Siemens | 95 Simatic Drive Controller Cpu 1504d Tf, Simatic Drive Controller Cpu 1504d Tf Firmware, Simatic Drive Controller Cpu 1507d Tf and 92 more | 2026-06-17 | 7.1 HIGH | 7.5 HIGH |
| A vulnerability has been identified in SIMATIC Drive Controller family (All versions >= V2.9.2 < V2.9.4), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions >= V21.9 < V21.9.4), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions >= V4.5.0 < V4.5.2), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions >= V2.9.2 < V2.9.4), SIMATIC S7-1500 Software Controller (All versions >= V21.9 < V21.9.4), SIMATIC S7-PLCSIM Advanced (All versions >= V4.0 < V4.0 SP1), SIPLUS TIM 1531 IRC (All versions < V2.3.6), TIM 1531 IRC (All versions < V2.3.6). An unauthenticated attacker could cause a denial-of-service condition in a PLC when sending specially prepared packets over port 102/tcp. A restart of the affected device is needed to restore normal operations. | |||||
| CVE-2021-33020 | 1 Philips | 4 Myvue, Speech, Vue Motion and 1 more | 2026-06-17 | 5.0 MEDIUM | 8.2 HIGH |
| Philips Vue PACS versions 12.2.x.x and prior uses a cryptographic key or password past its expiration date, which diminishes its safety significantly by increasing the timing window for cracking attacks against that key. | |||||
| CVE-2021-23995 | 1 Mozilla | 3 Firefox, Firefox Esr, Thunderbird | 2026-06-17 | 5.1 MEDIUM | 8.8 HIGH |
| When Responsive Design Mode was enabled, it used references to objects that were previously freed. We presume that with enough effort this could have been exploited to run arbitrary code. This vulnerability affects Firefox ESR < 78.10, Thunderbird < 78.10, and Firefox < 88. | |||||
| CVE-2020-25221 | 2 Linux, Netapp | 6 Linux Kernel, Cloud Backup, Hci Compute Node and 3 more | 2026-06-17 | 7.2 HIGH | 7.8 HIGH |
| get_gate_page in mm/gup.c in the Linux kernel 5.7.x and 5.8.x before 5.8.7 allows privilege escalation because of incorrect reference counting (caused by gate page mishandling) of the struct page that backs the vsyscall page. The result is a refcount underflow. This can be triggered by any 64-bit process that can use ptrace() or process_vm_readv(), aka CID-9fa2dd946743. | |||||
| CVE-2020-24030 | 1 Forlogic | 1 Qualiex | 2026-06-17 | 7.5 HIGH | 9.8 CRITICAL |
| ForLogic Qualiex v1 and v3 has weak token expiration. This allows remote unauthenticated privilege escalation and access to sensitive data via token reuse. NOTE: as of 2025-10-14, the Supplier's perspective is that this is "not exploitable in the current implementation. Tokens are properly expired, invalidated, and bound to session context. Attempts to alter the token payload to extend its validity do not affect server-side validation." | |||||
| CVE-2020-15270 | 1 Parseplatform | 1 Parse-server | 2026-06-17 | 4.0 MEDIUM | 4.3 MEDIUM |
| Parse Server (npm package parse-server) broadcasts events to all clients without checking if the session token is valid. This allows clients with expired sessions to still receive subscription objects. It is not possible to create subscription objects with invalid session tokens. The issue is not patched. | |||||
| CVE-2020-13530 | 1 Opener Project | 1 Opener | 2026-06-17 | 5.0 MEDIUM | 7.5 HIGH |
| A denial-of-service vulnerability exists in the Ethernet/IP server functionality of the EIP Stack Group OpENer 2.3 and development commit 8c73bf3. A large number of network requests in a small span of time can cause the running program to stop. An attacker can send a sequence of requests to trigger this vulnerability. | |||||
| CVE-2020-12043 | 1 Baxter | 3 Sigma Spectrum Infusion System, Sigma Spectrum Infusion System Firmware, Wireless Battery Module | 2026-06-17 | 7.5 HIGH | 9.8 CRITICAL |
| The Baxter Spectrum WBM (v17, v20D29, v20D30, v20D31, and v22D24) when configured for wireless networking the FTP service operating on the WBM remains operational until the WBM is rebooted. | |||||
| CVE-2020-11027 | 2 Debian, Wordpress | 2 Debian Linux, Wordpress | 2026-06-17 | 5.5 MEDIUM | 6.1 MEDIUM |
| In affected versions of WordPress, a password reset link emailed to a user does not expire upon changing the user password. Access would be needed to the email account of the user by a malicious party for successful execution. This has been patched in version 5.4.1, along with all the previously affected versions via a minor release (5.3.3, 5.2.6, 5.1.5, 5.0.9, 4.9.14, 4.8.13, 4.7.17, 4.6.18, 4.5.21, 4.4.22, 4.3.23, 4.2.27, 4.1.30, 4.0.30, 3.9.31, 3.8.33, 3.7.33). | |||||
| CVE-2019-20022 | 1 Saitoha | 1 Libsixel | 2026-06-17 | 4.3 MEDIUM | 6.5 MEDIUM |
| An invalid memory address dereference was discovered in load_pnm in frompnm.c in libsixel before 1.8.3. | |||||
| CVE-2019-19480 | 2 Linux, Opensc Project | 2 Linux Kernel, Opensc | 2026-06-17 | 2.1 LOW | 4.6 MEDIUM |
| An issue was discovered in OpenSC through 0.19.0 and 0.20.x through 0.20.0-rc3. libopensc/pkcs15-prkey.c has an incorrect free operation in sc_pkcs15_decode_prkdf_entry. | |||||
| CVE-2019-17638 | 1 Eclipse | 1 Jetty | 2026-06-17 | 7.5 HIGH | 9.4 CRITICAL |
| In Eclipse Jetty, versions 9.4.27.v20200227 to 9.4.29.v20200521, in case of too large response headers, Jetty throws an exception to produce an HTTP 431 error. When this happens, the ByteBuffer containing the HTTP response headers is released back to the ByteBufferPool twice. Because of this double release, two threads can acquire the same ByteBuffer from the pool and while thread1 is about to use the ByteBuffer to write response1 data, thread2 fills the ByteBuffer with other data. Thread1 then proceeds to write the buffer that now contains different data. This results in client1, which issued request1 seeing data from another request or response which could contain sensitive data belonging to client2 (HTTP session ids, authentication credentials, etc.). If the Jetty version cannot be upgraded, the vulnerability can be significantly reduced by configuring a responseHeaderSize significantly larger than the requestHeaderSize (12KB responseHeaderSize and 8KB requestHeaderSize). | |||||
| CVE-2019-15794 | 2 Canonical, Linux | 2 Ubuntu Linux, Linux Kernel | 2026-06-17 | 7.2 HIGH | 7.1 HIGH |
| Overlayfs in the Linux kernel and shiftfs, a non-upstream patch to the Linux kernel included in the Ubuntu 5.0 and 5.3 kernel series, both replace vma->vm_file in their mmap handlers. On error the original value is not restored, and the reference is put for the file to which vm_file points. On upstream kernels this is not an issue, as no callers dereference vm_file following after call_mmap() returns an error. However, the aufs patchs change mmap_region() to replace the fput() using a local variable with vma_fput(), which will fput() vm_file, leading to a refcount underflow. | |||||
| CVE-2019-15691 | 2 Opensuse, Tigervnc | 2 Leap, Tigervnc | 2026-06-17 | 6.5 MEDIUM | 7.2 HIGH |
| TigerVNC version prior to 1.10.1 is vulnerable to stack use-after-return, which occurs due to incorrect usage of stack memory in ZRLEDecoder. If decoding routine would throw an exception, ZRLEDecoder may try to access stack variable, which has been already freed during the process of stack unwinding. Exploitation of this vulnerability could potentially result into remote code execution. This attack appear to be exploitable via network connectivity. | |||||
| CVE-2018-25098 | 1 Blockmason | 1 Credit-protocol | 2026-06-17 | 3.3 LOW | 4.3 MEDIUM |
| ** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in blockmason credit-protocol. It has been declared as problematic. Affected by this vulnerability is the function executeUcacTx of the file contracts/CreditProtocol.sol of the component UCAC Handler. The manipulation leads to denial of service. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The patch is named 082e01f18707ef995e80ebe97fcedb229a55efc5. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-252799. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. | |||||