Total
57 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-21117 | 1 Dell | 1 Avamar Server | 2025-03-28 | N/A | 6.6 MEDIUM |
| Dell Avamar, version 19.4 or later, contains an access token reuse vulnerability in the AUI. A low privileged local attacker could potentially exploit this vulnerability, leading to fully impersonating the user. | |||||
| CVE-2024-47571 | 1 Fortinet | 1 Fortimanager | 2025-03-19 | N/A | 8.1 HIGH |
| An operation on a resource after expiration or release in Fortinet FortiManager 6.4.12 through 7.4.0 allows an attacker to gain improper access to FortiGate via valid credentials. | |||||
| CVE-2022-27499 | 1 Intel | 1 Sgx Sdk | 2025-02-05 | N/A | 2.5 LOW |
| Premature release of resource during expected lifetime in the Intel(R) SGX SDK software may allow a privileged user to potentially enable information disclosure via local access. | |||||
| CVE-2021-47069 | 1 Linux | 1 Linux Kernel | 2025-01-09 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry do_mq_timedreceive calls wq_sleep with a stack local address. The sender (do_mq_timedsend) uses this address to later call pipelined_send. This leads to a very hard to trigger race where a do_mq_timedreceive call might return and leave do_mq_timedsend to rely on an invalid address, causing the following crash: RIP: 0010:wake_q_add_safe+0x13/0x60 Call Trace: __x64_sys_mq_timedsend+0x2a9/0x490 do_syscall_64+0x80/0x680 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5928e40343 The race occurs as: 1. do_mq_timedreceive calls wq_sleep with the address of `struct ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it holds a valid `struct ext_wait_queue *` as long as the stack has not been overwritten. 2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call __pipelined_op. 3. Sender calls __pipelined_op::smp_store_release(&this->state, STATE_READY). Here is where the race window begins. (`this` is `ewq_addr`.) 4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it will see `state == STATE_READY` and break. 5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's stack. (Although the address may not get overwritten until another function happens to touch it, which means it can persist around for an indefinite time.) 6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a `struct ext_wait_queue *`, and uses it to find a task_struct to pass to the wake_q_add_safe call. In the lucky case where nothing has overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct. In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a bogus address as the receiver's task_struct causing the crash. do_mq_timedsend::__pipelined_op() should not dereference `this` after setting STATE_READY, as the receiver counterpart is now free to return. Change __pipelined_op to call wake_q_add_safe on the receiver's task_struct returned by get_task_struct, instead of dereferencing `this` which sits on the receiver's stack. As Manfred pointed out, the race potentially also exists in ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare. Fix those in the same way. | |||||
| CVE-2024-31895 | 1 Ibm | 1 App Connect Enterprise | 2025-01-08 | N/A | 4.3 MEDIUM |
| IBM App Connect Enterprise 12.0.1.0 through 12.0.12.1 could allow an authenticated user to obtain sensitive user information using an expired access token. IBM X-Force ID: 288176. | |||||
| CVE-2024-31894 | 1 Ibm | 1 App Connect Enterprise | 2025-01-08 | N/A | 4.3 MEDIUM |
| IBM App Connect Enterprise 12.0.1.0 through 12.0.12.1 could allow an authenticated user to obtain sensitive user information using an expired access token. IBM X-Force ID: 288175. | |||||
| CVE-2024-31893 | 1 Ibm | 1 App Connect Enterprise | 2025-01-07 | N/A | 4.3 MEDIUM |
| IBM App Connect Enterprise 12.0.1.0 through 12.0.12.1 could allow an authenticated user to obtain sensitive calendar information using an expired access token. IBM X-Force ID: 288174. | |||||
| CVE-2024-25619 | 1 Joinmastodon | 1 Mastodon | 2024-12-18 | N/A | 3.1 LOW |
| Mastodon is a free, open-source social network server based on ActivityPub. When an OAuth Application is destroyed, the streaming server wasn't being informed that the Access Tokens had also been destroyed, this could have posed security risks to users by allowing an application to continue listening to streaming after the application had been destroyed. Essentially this comes down to the fact that when Doorkeeper sets up the relationship between Applications and Access Tokens, it uses a `dependent: delete_all` configuration, which means the `after_commit` callback setup on `AccessTokenExtension` didn't actually fire, since `delete_all` doesn't trigger ActiveRecord callbacks. To mitigate, we need to add a `before_destroy` callback to `ApplicationExtension` which announces to streaming that all the Application's Access Tokens are being "killed". Impact should be negligible given the affected application had to be owned by the user. None the less this issue has been addressed in versions 4.2.6, 4.1.14, 4.0.14, and 3.5.18. Users are advised to upgrade. There are no known workaround for this vulnerability. | |||||
| CVE-2024-4693 | 2024-11-21 | N/A | 5.5 MEDIUM | ||
| A flaw was found in the QEMU Virtio PCI Bindings (hw/virtio/virtio-pci.c). An improper release and use of the irqfd for vector 0 during the boot process leads to a guest triggerable crash via vhost_net_stop(). This flaw allows a malicious guest to crash the QEMU process on the host. | |||||
| CVE-2024-23638 | 1 Squid-cache | 1 Squid | 2024-11-21 | N/A | 6.5 MEDIUM |
| Squid is a caching proxy for the Web. Due to an expired pointer reference bug, Squid prior to version 6.6 is vulnerable to a Denial of Service attack against Cache Manager error responses. This problem allows a trusted client to perform Denial of Service when generating error pages for Client Manager reports. Squid older than 5.0.5 have not been tested and should be assumed to be vulnerable. All Squid-5.x up to and including 5.9 are vulnerable. All Squid-6.x up to and including 6.5 are vulnerable. This bug is fixed by Squid version 6.6. In addition, patches addressing this problem for the stable releases can be found in Squid's patch archives. As a workaround, prevent access to Cache Manager using Squid's main access control: `http_access deny manager`. | |||||
| CVE-2024-23332 | 1 Notaryproject | 1 Notation-go | 2024-11-21 | N/A | 4.0 MEDIUM |
| The Notary Project is a set of specifications and tools intended to provide a cross-industry standard for securing software supply chains by using authentic container images and other OCI artifacts. An external actor with control of a compromised container registry can provide outdated versions of OCI artifacts, such as Images. This could lead artifact consumers with relaxed trust policies (such as `permissive` instead of `strict`) to potentially use artifacts with signatures that are no longer valid, making them susceptible to any exploits those artifacts may contain. In Notary Project, an artifact publisher can control the validity period of artifact by specifying signature expiry during the signing process. Using shorter signature validity periods along with processes to periodically resign artifacts, allows artifact producers to ensure that their consumers will only receive up-to-date artifacts. Artifact consumers should correspondingly use a `strict` or equivalent trust policy that enforces signature expiry. Together these steps enable use of up-to-date artifacts and safeguard against rollback attack in the event of registry compromise. The Notary Project offers various signature validation options such as `permissive`, `audit` and `skip` to support various scenarios. These scenarios includes 1) situations demanding urgent workload deployment, necessitating the bypassing of expired or revoked signatures; 2) auditing of artifacts lacking signatures without interrupting workload; and 3) skipping of verification for specific images that might have undergone validation through alternative mechanisms. Additionally, the Notary Project supports revocation to ensure the signature freshness. Artifact publishers can sign with short-lived certificates and revoke older certificates when necessary. This revocation serves as a signal to inform artifact consumers that the corresponding unexpired artifact is no longer approved by the publisher. This enables the artifact publisher to control the validity of the signature independently of their ability to manage artifacts in a compromised registry. | |||||
| CVE-2023-42446 | 1 Powauth | 1 Pow | 2024-11-21 | N/A | 6.5 MEDIUM |
| Pow is a authentication and user management solution for Phoenix and Plug-based apps. Starting in version 1.0.14 and prior to version 1.0.34, use of `Pow.Store.Backend.MnesiaCache` is susceptible to session hijacking as expired keys are not being invalidated correctly on startup. A session may expire when all `Pow.Store.Backend.MnesiaCache` instances have been shut down for a period that is longer than a session's remaining TTL. Version 1.0.34 contains a patch for this issue. As a workaround, expired keys, including all expired sessions, can be manually invalidated. | |||||
| CVE-2023-41094 | 1 Silabs | 1 Emberznet | 2024-11-21 | N/A | 10.0 CRITICAL |
| TouchLink packets processed after timeout or out of range due to Operation on a Resource after Expiration and Missing Release of Resource after Effective Lifetime may allow a device to be added outside of valid TouchLink range or pairing duration This issue affects Ember ZNet 7.1.x from 7.1.3 through 7.1.5; 7.2.x from 7.2.0 through 7.2.3; Version 7.3 and later are unaffected | |||||
| CVE-2023-1902 | 1 Zephyrproject | 1 Zephyr | 2024-11-21 | N/A | 5.9 MEDIUM |
| The bluetooth HCI host layer logic not clearing a global reference to a state pointer after handling connection events may allow a malicious HCI Controller to cause the use of a dangling reference in the host layer, leading to a crash (DoS) or potential RCE on the Host layer. | |||||
| CVE-2023-1901 | 1 Zephyrproject | 1 Zephyr | 2024-11-21 | N/A | 5.9 MEDIUM |
| The bluetooth HCI host layer logic not clearing a global reference to a semaphore after synchronously sending HCI commands may allow a malicious HCI Controller to cause the use of a dangling reference in the host layer, leading to a crash (DoS) or potential RCE on the Host layer. | |||||
| CVE-2022-42838 | 1 Apple | 1 Macos | 2024-11-21 | N/A | 3.3 LOW |
| An issue with app access to camera data was addressed with improved logic. This issue is fixed in macOS Ventura 13. A camera extension may be able to continue receiving video after the app which activated was closed. | |||||
| CVE-2022-2447 | 2 Openstack, Redhat | 5 Keystone, Openstack, Openstack Platform and 2 more | 2024-11-21 | N/A | 6.6 MEDIUM |
| A flaw was found in Keystone. There is a time lag (up to one hour in a default configuration) between when security policy says a token should be revoked from when it is actually revoked. This could allow a remote administrator to secretly maintain access for longer than expected. | |||||
| CVE-2022-22332 | 1 Ibm | 1 Partner Engagement Manager | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| IBM Sterling Partner Engagement Manager 6.2.0 could allow an attacker to impersonate another user due to missing revocation mechanism for the JWT token. IBM X-Force ID: 219131. | |||||
| CVE-2022-22197 | 1 Juniper | 2 Junos, Junos Os Evolved | 2024-11-21 | 4.3 MEDIUM | 7.5 HIGH |
| An Operation on a Resource after Expiration or Release vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker with an established BGP session to cause a Denial of Service (DoS). This issue occurs when proxy-generate route-target filtering is enabled, and certain proxy-route add and delete events are happening. This issue affects: Juniper Networks Junos OS All versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S8, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S2, 20.3R2. Juniper Networks Junos OS Evolved All versions prior to 20.1R3-EVO; 20.2 versions prior to 20.2R3-EVO; 20.3 versions prior to 20.3R2-EVO. | |||||
| CVE-2021-37204 | 1 Siemens | 95 Simatic Drive Controller Cpu 1504d Tf, Simatic Drive Controller Cpu 1504d Tf Firmware, Simatic Drive Controller Cpu 1507d Tf and 92 more | 2024-11-21 | 7.1 HIGH | 7.5 HIGH |
| A vulnerability has been identified in SIMATIC Drive Controller family (All versions < V2.9.2), SIMATIC Drive Controller family (All versions >= V2.9.2 < V2.9.4), SIMATIC ET 200SP Open Controller CPU 1515SP PC (incl. SIPLUS variants) (All versions), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions < V21.9), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions >= V21.9 < V21.9.4), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 Ready4Linux (All versions), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions < V4.5.0), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions >= V4.5.0 < V4.5.2), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions < V2.9.2), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions >= V2.9.2 < V2.9.4), SIMATIC S7-1500 Software Controller (All versions < V21.9), SIMATIC S7-1500 Software Controller (All versions >= V21.9 < V21.9.4), SIMATIC S7-PLCSIM Advanced (All versions < V4.0), SIMATIC S7-PLCSIM Advanced (All versions >= V4.0 < V4.0 SP1), SIPLUS TIM 1531 IRC (All versions < V2.3.6), TIM 1531 IRC (All versions < V2.3.6). An unauthenticated attacker could cause a denial-of-service condition in a PLC when sending specially prepared packet over port 102/tcp. A restart of the affected device is needed to restore normal operations. | |||||