Total
5897 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-49840 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb() We got a syzkaller problem because of aarch64 alignment fault if KFENCE enabled. When the size from user bpf program is an odd number, like 399, 407, etc, it will cause the struct skb_shared_info's unaligned access. As seen below: BUG: KFENCE: use-after-free read in __skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032 Use-after-free read at 0xffff6254fffac077 (in kfence-#213): __lse_atomic_add arch/arm64/include/asm/atomic_lse.h:26 [inline] arch_atomic_add arch/arm64/include/asm/atomic.h:28 [inline] arch_atomic_inc include/linux/atomic-arch-fallback.h:270 [inline] atomic_inc include/asm-generic/atomic-instrumented.h:241 [inline] __skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032 skb_clone+0xf4/0x214 net/core/skbuff.c:1481 ____bpf_clone_redirect net/core/filter.c:2433 [inline] bpf_clone_redirect+0x78/0x1c0 net/core/filter.c:2420 bpf_prog_d3839dd9068ceb51+0x80/0x330 bpf_dispatcher_nop_func include/linux/bpf.h:728 [inline] bpf_test_run+0x3c0/0x6c0 net/bpf/test_run.c:53 bpf_prog_test_run_skb+0x638/0xa7c net/bpf/test_run.c:594 bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline] __do_sys_bpf kernel/bpf/syscall.c:4441 [inline] __se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381 kfence-#213: 0xffff6254fffac000-0xffff6254fffac196, size=407, cache=kmalloc-512 allocated by task 15074 on cpu 0 at 1342.585390s: kmalloc include/linux/slab.h:568 [inline] kzalloc include/linux/slab.h:675 [inline] bpf_test_init.isra.0+0xac/0x290 net/bpf/test_run.c:191 bpf_prog_test_run_skb+0x11c/0xa7c net/bpf/test_run.c:512 bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline] __do_sys_bpf kernel/bpf/syscall.c:4441 [inline] __se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381 __arm64_sys_bpf+0x50/0x60 kernel/bpf/syscall.c:4381 To fix the problem, we adjust @size so that (@size + @hearoom) is a multiple of SMP_CACHE_BYTES. So we make sure the struct skb_shared_info is aligned to a cache line. | |||||
| CVE-2022-49919 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: release flow rule object from commit path No need to postpone this to the commit release path, since no packets are walking over this object, this is accessed from control plane only. This helped uncovered UAF triggered by races with the netlink notifier. | |||||
| CVE-2022-49909 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del() When l2cap_recv_frame() is invoked to receive data, and the cid is L2CAP_CID_A2MP, if the channel does not exist, it will create a channel. However, after a channel is created, the hold operation of the channel is not performed. In this case, the value of channel reference counting is 1. As a result, after hci_error_reset() is triggered, l2cap_conn_del() invokes the close hook function of A2MP to release the channel. Then l2cap_chan_unlock(chan) will trigger UAF issue. The process is as follows: Receive data: l2cap_data_channel() a2mp_channel_create() --->channel ref is 2 l2cap_chan_put() --->channel ref is 1 Triger event: hci_error_reset() hci_dev_do_close() ... l2cap_disconn_cfm() l2cap_conn_del() l2cap_chan_hold() --->channel ref is 2 l2cap_chan_del() --->channel ref is 1 a2mp_chan_close_cb() --->channel ref is 0, release channel l2cap_chan_unlock() --->UAF of channel The detailed Call Trace is as follows: BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0xa6/0x5e0 Read of size 8 at addr ffff8880160664b8 by task kworker/u11:1/7593 Workqueue: hci0 hci_error_reset Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 print_report.cold+0x2ba/0x719 kasan_report+0xb1/0x1e0 kasan_check_range+0x140/0x190 __mutex_unlock_slowpath+0xa6/0x5e0 l2cap_conn_del+0x404/0x7b0 l2cap_disconn_cfm+0x8c/0xc0 hci_conn_hash_flush+0x11f/0x260 hci_dev_close_sync+0x5f5/0x11f0 hci_dev_do_close+0x2d/0x70 hci_error_reset+0x9e/0x140 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 7593: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0xa9/0xd0 l2cap_chan_create+0x40/0x930 amp_mgr_create+0x96/0x990 a2mp_channel_create+0x7d/0x150 l2cap_recv_frame+0x51b8/0x9a70 l2cap_recv_acldata+0xaa3/0xc00 hci_rx_work+0x702/0x1220 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Freed by task 7593: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x167/0x1c0 slab_free_freelist_hook+0x89/0x1c0 kfree+0xe2/0x580 l2cap_chan_put+0x22a/0x2d0 l2cap_conn_del+0x3fc/0x7b0 l2cap_disconn_cfm+0x8c/0xc0 hci_conn_hash_flush+0x11f/0x260 hci_dev_close_sync+0x5f5/0x11f0 hci_dev_do_close+0x2d/0x70 hci_error_reset+0x9e/0x140 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0xbe/0xd0 call_rcu+0x99/0x740 netlink_release+0xe6a/0x1cf0 __sock_release+0xcd/0x280 sock_close+0x18/0x20 __fput+0x27c/0xa90 task_work_run+0xdd/0x1a0 exit_to_user_mode_prepare+0x23c/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0xbe/0xd0 call_rcu+0x99/0x740 netlink_release+0xe6a/0x1cf0 __sock_release+0xcd/0x280 sock_close+0x18/0x20 __fput+0x27c/0xa90 task_work_run+0xdd/0x1a0 exit_to_user_mode_prepare+0x23c/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd | |||||
| CVE-2022-49921 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: Fix use after free in red_enqueue() We can't use "skb" again after passing it to qdisc_enqueue(). This is basically identical to commit 2f09707d0c97 ("sch_sfb: Also store skb len before calling child enqueue"). | |||||
| CVE-2025-30232 | 1 Exim | 1 Exim | 2025-09-30 | N/A | 8.1 HIGH |
| A use-after-free in Exim 4.96 through 4.98.1 could allow users (with command-line access) to escalate privileges. | |||||
| CVE-2024-43864 | 1 Linux | 1 Linux Kernel | 2025-09-29 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix CT entry update leaks of modify header context The cited commit allocates a new modify header to replace the old one when updating CT entry. But if failed to allocate a new one, eg. exceed the max number firmware can support, modify header will be an error pointer that will trigger a panic when deallocating it. And the old modify header point is copied to old attr. When the old attr is freed, the old modify header is lost. Fix it by restoring the old attr to attr when failed to allocate a new modify header context. So when the CT entry is freed, the right modify header context will be freed. And the panic of accessing error pointer is also fixed. | |||||
| CVE-2025-10994 | 1 Openbabel | 1 Open Babel | 2025-09-29 | 4.3 MEDIUM | 5.3 MEDIUM |
| A weakness has been identified in Open Babel up to 3.1.1. This affects the function GAMESSOutputFormat::ReadMolecule of the file gamessformat.cpp. This manipulation causes use after free. It is possible to launch the attack on the local host. The exploit has been made available to the public and could be exploited. | |||||
| CVE-2024-57849 | 1 Linux | 1 Linux Kernel | 2025-09-26 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: s390/cpum_sf: Handle CPU hotplug remove during sampling CPU hotplug remove handling triggers the following function call sequence: CPUHP_AP_PERF_S390_SF_ONLINE --> s390_pmu_sf_offline_cpu() ... CPUHP_AP_PERF_ONLINE --> perf_event_exit_cpu() The s390 CPUMF sampling CPU hotplug handler invokes: s390_pmu_sf_offline_cpu() +--> cpusf_pmu_setup() +--> setup_pmc_cpu() +--> deallocate_buffers() This function de-allocates all sampling data buffers (SDBs) allocated for that CPU at event initialization. It also clears the PMU_F_RESERVED bit. The CPU is gone and can not be sampled. With the event still being active on the removed CPU, the CPU event hotplug support in kernel performance subsystem triggers the following function calls on the removed CPU: perf_event_exit_cpu() +--> perf_event_exit_cpu_context() +--> __perf_event_exit_context() +--> __perf_remove_from_context() +--> event_sched_out() +--> cpumsf_pmu_del() +--> cpumsf_pmu_stop() +--> hw_perf_event_update() to stop and remove the event. During removal of the event, the sampling device driver tries to read out the remaining samples from the sample data buffers (SDBs). But they have already been freed (and may have been re-assigned). This may lead to a use after free situation in which case the samples are most likely invalid. In the best case the memory has not been reassigned and still contains valid data. Remedy this situation and check if the CPU is still in reserved state (bit PMU_F_RESERVED set). In this case the SDBs have not been released an contain valid data. This is always the case when the event is removed (and no CPU hotplug off occured). If the PMU_F_RESERVED bit is not set, the SDB buffers are gone. | |||||
| CVE-2025-5068 | 1 Google | 1 Chrome | 2025-09-26 | N/A | 8.8 HIGH |
| Use after free in Blink in Google Chrome prior to 137.0.7151.68 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Medium) | |||||
| CVE-2024-42105 | 1 Linux | 1 Linux Kernel | 2025-09-26 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix inode number range checks Patch series "nilfs2: fix potential issues related to reserved inodes". This series fixes one use-after-free issue reported by syzbot, caused by nilfs2's internal inode being exposed in the namespace on a corrupted filesystem, and a couple of flaws that cause problems if the starting number of non-reserved inodes written in the on-disk super block is intentionally (or corruptly) changed from its default value. This patch (of 3): In the current implementation of nilfs2, "nilfs->ns_first_ino", which gives the first non-reserved inode number, is read from the superblock, but its lower limit is not checked. As a result, if a number that overlaps with the inode number range of reserved inodes such as the root directory or metadata files is set in the super block parameter, the inode number test macros (NILFS_MDT_INODE and NILFS_VALID_INODE) will not function properly. In addition, these test macros use left bit-shift calculations using with the inode number as the shift count via the BIT macro, but the result of a shift calculation that exceeds the bit width of an integer is undefined in the C specification, so if "ns_first_ino" is set to a large value other than the default value NILFS_USER_INO (=11), the macros may potentially malfunction depending on the environment. Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and by preventing bit shifts equal to or greater than the NILFS_USER_INO constant in the inode number test macros. Also, change the type of "ns_first_ino" from signed integer to unsigned integer to avoid the need for type casting in comparisons such as the lower bound check introduced this time. | |||||
| CVE-2024-41074 | 1 Linux | 1 Linux Kernel | 2025-09-26 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Set object to close if ondemand_id < 0 in copen If copen is maliciously called in the user mode, it may delete the request corresponding to the random id. And the request may have not been read yet. Note that when the object is set to reopen, the open request will be done with the still reopen state in above case. As a result, the request corresponding to this object is always skipped in select_req function, so the read request is never completed and blocks other process. Fix this issue by simply set object to close if its id < 0 in copen. | |||||
| CVE-2023-4813 | 4 Fedoraproject, Gnu, Netapp and 1 more | 21 Fedora, Glibc, Active Iq Unified Manager and 18 more | 2025-09-26 | N/A | 5.9 MEDIUM |
| A flaw has been identified in glibc. In an uncommon situation, the gaih_inet function may use memory that has been freed, resulting in an application crash. This issue is only exploitable when the getaddrinfo function is called and the hosts database in /etc/nsswitch.conf is configured with SUCCESS=continue or SUCCESS=merge. | |||||
| CVE-2023-4806 | 3 Fedoraproject, Gnu, Redhat | 22 Fedora, Glibc, Codeready Linux Builder Eus and 19 more | 2025-09-26 | N/A | 5.9 MEDIUM |
| A flaw has been identified in glibc. In an extremely rare situation, the getaddrinfo function may access memory that has been freed, resulting in an application crash. This issue is only exploitable when a NSS module implements only the _nss_*_gethostbyname2_r and _nss_*_getcanonname_r hooks without implementing the _nss_*_gethostbyname3_r hook. The resolved name should return a large number of IPv6 and IPv4, and the call to the getaddrinfo function should have the AF_INET6 address family with AI_CANONNAME, AI_ALL and AI_V4MAPPED as flags. | |||||
| CVE-2023-41093 | 1 Silabs | 1 Bluetooth Low Energy Software Development Kit | 2025-09-25 | N/A | 3.1 LOW |
| Use After Free vulnerability in Silicon Labs Bluetooth SDK on 32 bit, ARM may allow an attacker with precise timing capabilities to intercept a small number of packets intended for a recipient that has left the network.This issue affects Silabs Bluetooth SDK: through 8.0.0. | |||||
| CVE-2024-41045 | 1 Linux | 1 Linux Kernel | 2025-09-25 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Defer work in bpf_timer_cancel_and_free Currently, the same case as previous patch (two timer callbacks trying to cancel each other) can be invoked through bpf_map_update_elem as well, or more precisely, freeing map elements containing timers. Since this relies on hrtimer_cancel as well, it is prone to the same deadlock situation as the previous patch. It would be sufficient to use hrtimer_try_to_cancel to fix this problem, as the timer cannot be enqueued after async_cancel_and_free. Once async_cancel_and_free has been done, the timer must be reinitialized before it can be armed again. The callback running in parallel trying to arm the timer will fail, and freeing bpf_hrtimer without waiting is sufficient (given kfree_rcu), and bpf_timer_cb will return HRTIMER_NORESTART, preventing the timer from being rearmed again. However, there exists a UAF scenario where the callback arms the timer before entering this function, such that if cancellation fails (due to timer callback invoking this routine, or the target timer callback running concurrently). In such a case, if the timer expiration is significantly far in the future, the RCU grace period expiration happening before it will free the bpf_hrtimer state and along with it the struct hrtimer, that is enqueued. Hence, it is clear cancellation needs to occur after async_cancel_and_free, and yet it cannot be done inline due to deadlock issues. We thus modify bpf_timer_cancel_and_free to defer work to the global workqueue, adding a work_struct alongside rcu_head (both used at _different_ points of time, so can share space). Update existing code comments to reflect the new state of affairs. | |||||
| CVE-2024-41050 | 1 Linux | 1 Linux Kernel | 2025-09-25 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: cyclic allocation of msg_id to avoid reuse Reusing the msg_id after a maliciously completed reopen request may cause a read request to remain unprocessed and result in a hung, as shown below: t1 | t2 | t3 ------------------------------------------------- cachefiles_ondemand_select_req cachefiles_ondemand_object_is_close(A) cachefiles_ondemand_set_object_reopening(A) queue_work(fscache_object_wq, &info->work) ondemand_object_worker cachefiles_ondemand_init_object(A) cachefiles_ondemand_send_req(OPEN) // get msg_id 6 wait_for_completion(&req_A->done) cachefiles_ondemand_daemon_read // read msg_id 6 req_A cachefiles_ondemand_get_fd copy_to_user // Malicious completion msg_id 6 copen 6,-1 cachefiles_ondemand_copen complete(&req_A->done) // will not set the object to close // because ondemand_id && fd is valid. // ondemand_object_worker() is done // but the object is still reopening. // new open req_B cachefiles_ondemand_init_object(B) cachefiles_ondemand_send_req(OPEN) // reuse msg_id 6 process_open_req copen 6,A.size // The expected failed copen was executed successfully Expect copen to fail, and when it does, it closes fd, which sets the object to close, and then close triggers reopen again. However, due to msg_id reuse resulting in a successful copen, the anonymous fd is not closed until the daemon exits. Therefore read requests waiting for reopen to complete may trigger hung task. To avoid this issue, allocate the msg_id cyclically to avoid reusing the msg_id for a very short duration of time. | |||||
| CVE-2024-41051 | 1 Linux | 1 Linux Kernel | 2025-09-25 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: wait for ondemand_object_worker to finish when dropping object When queuing ondemand_object_worker() to re-open the object, cachefiles_object is not pinned. The cachefiles_object may be freed when the pending read request is completed intentionally and the related erofs is umounted. If ondemand_object_worker() runs after the object is freed, it will incur use-after-free problem as shown below. process A processs B process C process D cachefiles_ondemand_send_req() // send a read req X // wait for its completion // close ondemand fd cachefiles_ondemand_fd_release() // set object as CLOSE cachefiles_ondemand_daemon_read() // set object as REOPENING queue_work(fscache_wq, &info->ondemand_work) // close /dev/cachefiles cachefiles_daemon_release cachefiles_flush_reqs complete(&req->done) // read req X is completed // umount the erofs fs cachefiles_put_object() // object will be freed cachefiles_ondemand_deinit_obj_info() kmem_cache_free(object) // both info and object are freed ondemand_object_worker() When dropping an object, it is no longer necessary to reopen the object, so use cancel_work_sync() to cancel or wait for ondemand_object_worker() to finish. | |||||
| CVE-2022-48821 | 1 Linux | 1 Linux Kernel | 2025-09-25 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: avoid double fput() on failed usercopy If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact, dma_buf_fd() called fd_install() before, i.e. "consumed" one reference, leaving us with none. Calling dma_buf_put() will therefore put a reference we no longer own, leading to a valid file descritor table entry for an already released 'file' object which is a straight use-after-free. Simply avoid calling dma_buf_put() and rely on the process exit code to do the necessary cleanup, if needed, i.e. if the file descriptor is still valid. | |||||
| CVE-2025-27037 | 1 Qualcomm | 74 Fastconnect 6800, Fastconnect 6800 Firmware, Fastconnect 6900 and 71 more | 2025-09-25 | N/A | 7.8 HIGH |
| Memory corruption while processing config_dev IOCTL when camera kernel driver drops its reference to CPU buffers. | |||||
| CVE-2025-27077 | 1 Qualcomm | 54 Qam8255p, Qam8255p Firmware, Qam8295p and 51 more | 2025-09-25 | N/A | 7.8 HIGH |
| Memory corruption while processing message in guest VM. | |||||