Total
5727 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-23370 | 1 Qualcomm | 22 Qca6584au, Qca6584au Firmware, Qca6698aq and 19 more | 2024-10-16 | N/A | 6.7 MEDIUM |
| Memory corruption when a process invokes IOCTL calls from user-space to create a HAB virtual channel and another process invokes IOCTL calls to destroy the same. | |||||
| CVE-2024-23376 | 1 Qualcomm | 42 Fastconnect 6900, Fastconnect 6900 Firmware, Fastconnect 7800 and 39 more | 2024-10-16 | N/A | 6.7 MEDIUM |
| Memory corruption while sending the persist buffer command packet from the user-space to the kernel space through the IOCTL call. | |||||
| CVE-2024-33069 | 1 Qualcomm | 88 Fastconnect 6800, Fastconnect 6800 Firmware, Fastconnect 6900 and 85 more | 2024-10-16 | N/A | 7.5 HIGH |
| Transient DOS when transmission of management frame sent by host is not successful and error status is received in the host. | |||||
| CVE-2024-38399 | 1 Qualcomm | 80 Fastconnect 6900, Fastconnect 6900 Firmware, Fastconnect 7800 and 77 more | 2024-10-16 | N/A | 7.8 HIGH |
| Memory corruption while processing user packets to generate page faults. | |||||
| CVE-2024-8422 | 1 Schneider-electric | 1 Zelio Soft 2 | 2024-10-16 | N/A | 7.8 HIGH |
| CWE-416: Use After Free vulnerability exists that could cause arbitrary code execution, denial of service and loss of confidentiality & integrity when application user opens a malicious Zelio Soft 2 project file. | |||||
| CVE-2024-39831 | 1 Openatom | 1 Openharmony | 2024-10-16 | N/A | 6.7 MEDIUM |
| in OpenHarmony v4.1.0 allow a local attacker with high privileges arbitrary code execution in pre-installed apps through use after free. | |||||
| CVE-2024-9979 | 2024-10-16 | N/A | 5.3 MEDIUM | ||
| A flaw was found in PyO3. This vulnerability causes a use-after-free issue, potentially leading to memory corruption or crashes via unsound borrowing from weak Python references. | |||||
| CVE-2024-43701 | 2024-10-15 | N/A | 7.8 HIGH | ||
| Software installed and run as a non-privileged user may conduct GPU system calls to read and write freed physical memory from the GPU. | |||||
| CVE-2024-47418 | 3 Adobe, Apple, Microsoft | 3 Animate, Macos, Windows | 2024-10-10 | N/A | 7.8 HIGH |
| Animate versions 23.0.7, 24.0.4 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | |||||
| CVE-2024-47415 | 3 Adobe, Apple, Microsoft | 3 Animate, Macos, Windows | 2024-10-10 | N/A | 7.8 HIGH |
| Animate versions 23.0.7, 24.0.4 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | |||||
| CVE-2024-47414 | 3 Adobe, Apple, Microsoft | 3 Animate, Macos, Windows | 2024-10-10 | N/A | 7.8 HIGH |
| Animate versions 23.0.7, 24.0.4 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | |||||
| CVE-2024-47413 | 3 Adobe, Apple, Microsoft | 3 Animate, Macos, Windows | 2024-10-10 | N/A | 7.8 HIGH |
| Animate versions 23.0.7, 24.0.4 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | |||||
| CVE-2024-47412 | 3 Adobe, Apple, Microsoft | 3 Animate, Macos, Windows | 2024-10-10 | N/A | 7.8 HIGH |
| Animate versions 23.0.7, 24.0.4 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | |||||
| CVE-2024-38259 | 1 Microsoft | 6 Windows 11 21h2, Windows 11 22h2, Windows 11 23h2 and 3 more | 2024-10-10 | N/A | 8.8 HIGH |
| Microsoft Management Console Remote Code Execution Vulnerability | |||||
| CVE-2024-46842 | 1 Linux | 1 Linux Kernel | 2024-10-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Handle mailbox timeouts in lpfc_get_sfp_info The MBX_TIMEOUT return code is not handled in lpfc_get_sfp_info and the routine unconditionally frees submitted mailbox commands regardless of return status. The issue is that for MBX_TIMEOUT cases, when firmware returns SFP information at a later time, that same mailbox memory region references previously freed memory in its cmpl routine. Fix by adding checks for the MBX_TIMEOUT return code. During mailbox resource cleanup, check the mbox flag to make sure that the wait did not timeout. If the MBOX_WAKE flag is not set, then do not free the resources because it will be freed when firmware completes the mailbox at a later time in its cmpl routine. Also, increase the timeout from 30 to 60 seconds to accommodate boot scripts requiring longer timeouts. | |||||
| CVE-2024-0124 | 2024-10-04 | N/A | 3.3 LOW | ||
| NVIDIA CUDA Toolkit for Windows and Linux contains a vulnerability in the nvdisam command line tool, where a user can cause nvdisasm to read freed memory by running it on a malformed ELF file. A successful exploit of this vulnerability might lead to a limited denial of service. | |||||
| CVE-2024-23923 | 1 Alpsalpine | 2 Ilx-f509, Ilx-f509 Firmware | 2024-10-03 | N/A | 8.8 HIGH |
| Alpine Halo9 prh_l2_sar_data_ind Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Alpine Halo9 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the prh_l2_sar_data_ind function. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22945 | |||||
| CVE-2024-46831 | 1 Linux | 1 Linux Kernel | 2024-10-02 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: microchip: vcap: Fix use-after-free error in kunit test This is a clear use-after-free error. We remove it, and rely on checking the return code of vcap_del_rule. | |||||
| CVE-2024-46845 | 1 Linux | 1 Linux Kernel | 2024-10-02 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tracing/timerlat: Only clear timer if a kthread exists The timerlat tracer can use user space threads to check for osnoise and timer latency. If the program using this is killed via a SIGTERM, the threads are shutdown one at a time and another tracing instance can start up resetting the threads before they are fully closed. That causes the hrtimer assigned to the kthread to be shutdown and freed twice when the dying thread finally closes the file descriptors, causing a use-after-free bug. Only cancel the hrtimer if the associated thread is still around. Also add the interface_lock around the resetting of the tlat_var->kthread. Note, this is just a quick fix that can be backported to stable. A real fix is to have a better synchronization between the shutdown of old threads and the starting of new ones. | |||||
| CVE-2024-46786 | 1 Linux | 1 Linux Kernel | 2024-09-26 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fscache: delete fscache_cookie_lru_timer when fscache exits to avoid UAF The fscache_cookie_lru_timer is initialized when the fscache module is inserted, but is not deleted when the fscache module is removed. If timer_reduce() is called before removing the fscache module, the fscache_cookie_lru_timer will be added to the timer list of the current cpu. Afterwards, a use-after-free will be triggered in the softIRQ after removing the fscache module, as follows: ================================================================== BUG: unable to handle page fault for address: fffffbfff803c9e9 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 21ffea067 P4D 21ffea067 PUD 21ffe6067 PMD 110a7c067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Tainted: G W 6.11.0-rc3 #855 Tainted: [W]=WARN RIP: 0010:__run_timer_base.part.0+0x254/0x8a0 Call Trace: <IRQ> tmigr_handle_remote_up+0x627/0x810 __walk_groups.isra.0+0x47/0x140 tmigr_handle_remote+0x1fa/0x2f0 handle_softirqs+0x180/0x590 irq_exit_rcu+0x84/0xb0 sysvec_apic_timer_interrupt+0x6e/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:default_idle+0xf/0x20 default_idle_call+0x38/0x60 do_idle+0x2b5/0x300 cpu_startup_entry+0x54/0x60 start_secondary+0x20d/0x280 common_startup_64+0x13e/0x148 </TASK> Modules linked in: [last unloaded: netfs] ================================================================== Therefore delete fscache_cookie_lru_timer when removing the fscahe module. | |||||