Total
6111 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-49992 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/stm: Avoid use-after-free issues with crtc and plane ltdc_load() calls functions drm_crtc_init_with_planes(), drm_universal_plane_init() and drm_encoder_init(). These functions should not be called with parameters allocated with devm_kzalloc() to avoid use-after-free issues [1]. Use allocations managed by the DRM framework. Found by Linux Verification Center (linuxtesting.org). [1] https://lore.kernel.org/lkml/u366i76e3qhh3ra5oxrtngjtm2u5lterkekcz6y2jkndhuxzli@diujon4h7qwb/ | |||||
| CVE-2024-49991 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: amdkfd_free_gtt_mem clear the correct pointer Pass pointer reference to amdgpu_bo_unref to clear the correct pointer, otherwise amdgpu_bo_unref clear the local variable, the original pointer not set to NULL, this could cause use-after-free bug. | |||||
| CVE-2024-49986 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors x86_android_tablet_remove() frees the pdevs[] array, so it should not be used after calling x86_android_tablet_remove(). When platform_device_register() fails, store the pdevs[x] PTR_ERR() value into the local ret variable before calling x86_android_tablet_remove() to avoid using pdevs[] after it has been freed. | |||||
| CVE-2024-49982 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in more places For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put() instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs into use-after-free. Then Nicolai Stange found more places in aoe have potential use-after-free problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe() and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push packet to tx queue. So they should also use dev_hold() to increase the refcnt of skb->dev. On the other hand, moving dev_put() to tx() causes that the refcnt of skb->dev be reduced to a negative value, because corresponding dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(), probe(), and aoecmd_cfg_rsp(). This patch fixed this issue. | |||||
| CVE-2024-49981 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: venus: fix use after free bug in venus_remove due to race condition in venus_probe, core->work is bound with venus_sys_error_handler, which is used to handle error. The code use core->sys_err_done to make sync work. The core->work is started in venus_event_notify. If we call venus_remove, there might be an unfished work. The possible sequence is as follows: CPU0 CPU1 |venus_sys_error_handler venus_remove | hfi_destroy | venus_hfi_destroy | kfree(hdev); | |hfi_reinit |venus_hfi_queues_reinit |//use hdev Fix it by canceling the work in venus_remove. | |||||
| CVE-2024-49966 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: cancel dqi_sync_work before freeing oinfo ocfs2_global_read_info() will initialize and schedule dqi_sync_work at the end, if error occurs after successfully reading global quota, it will trigger the following warning with CONFIG_DEBUG_OBJECTS_* enabled: ODEBUG: free active (active state 0) object: 00000000d8b0ce28 object type: timer_list hint: qsync_work_fn+0x0/0x16c This reports that there is an active delayed work when freeing oinfo in error handling, so cancel dqi_sync_work first. BTW, return status instead of -1 when .read_file_info fails. | |||||
| CVE-2024-49960 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix timer use-after-free on failed mount Syzbot has found an ODEBUG bug in ext4_fill_super The del_timer_sync function cancels the s_err_report timer, which reminds about filesystem errors daily. We should guarantee the timer is no longer active before kfree(sbi). When filesystem mounting fails, the flow goes to failed_mount3, where an error occurs when ext4_stop_mmpd is called, causing a read I/O failure. This triggers the ext4_handle_error function that ultimately re-arms the timer, leaving the s_err_report timer active before kfree(sbi) is called. Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd. | |||||
| CVE-2024-49950 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix uaf in l2cap_connect [Syzbot reported] BUG: KASAN: slab-use-after-free in l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 Read of size 8 at addr ffff8880241e9800 by task kworker/u9:0/54 CPU: 0 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-00268-g788220eee30d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Workqueue: hci2 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 l2cap_connect_req net/bluetooth/l2cap_core.c:4080 [inline] l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:4772 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5543 [inline] l2cap_recv_frame+0xf0b/0x8eb0 net/bluetooth/l2cap_core.c:6825 l2cap_recv_acldata+0x9b4/0xb70 net/bluetooth/l2cap_core.c:7514 hci_acldata_packet net/bluetooth/hci_core.c:3791 [inline] hci_rx_work+0xaab/0x1610 net/bluetooth/hci_core.c:4028 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 ... Freed by task 5245: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579 poison_slab_object+0xf7/0x160 mm/kasan/common.c:240 __kasan_slab_free+0x32/0x50 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2256 [inline] slab_free mm/slub.c:4477 [inline] kfree+0x12a/0x3b0 mm/slub.c:4598 l2cap_conn_free net/bluetooth/l2cap_core.c:1810 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_conn_put net/bluetooth/l2cap_core.c:1822 [inline] l2cap_conn_del+0x59d/0x730 net/bluetooth/l2cap_core.c:1802 l2cap_connect_cfm+0x9e6/0xf80 net/bluetooth/l2cap_core.c:7241 hci_connect_cfm include/net/bluetooth/hci_core.h:1960 [inline] hci_conn_failed+0x1c3/0x370 net/bluetooth/hci_conn.c:1265 hci_abort_conn_sync+0x75a/0xb50 net/bluetooth/hci_sync.c:5583 abort_conn_sync+0x197/0x360 net/bluetooth/hci_conn.c:2917 hci_cmd_sync_work+0x1a4/0x410 net/bluetooth/hci_sync.c:328 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 | |||||
| CVE-2024-49936 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/xen-netback: prevent UAF in xenvif_flush_hash() During the list_for_each_entry_rcu iteration call of xenvif_flush_hash, kfree_rcu does not exist inside the rcu read critical section, so if kfree_rcu is called when the rcu grace period ends during the iteration, UAF occurs when accessing head->next after the entry becomes free. Therefore, to solve this, you need to change it to list_for_each_entry_safe. | |||||
| CVE-2024-49924 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: pxafb: Fix possible use after free in pxafb_task() In the pxafb_probe function, it calls the pxafb_init_fbinfo function, after which &fbi->task is associated with pxafb_task. Moreover, within this pxafb_init_fbinfo function, the pxafb_blank function within the &pxafb_ops struct is capable of scheduling work. If we remove the module which will call pxafb_remove to make cleanup, it will call unregister_framebuffer function which can call do_unregister_framebuffer to free fbi->fb through put_fb_info(fb_info), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | pxafb_task pxafb_remove | unregister_framebuffer(info) | do_unregister_framebuffer(fb_info) | put_fb_info(fb_info) | // free fbi->fb | set_ctrlr_state(fbi, state) | __pxafb_lcd_power(fbi, 0) | fbi->lcd_power(on, &fbi->fb.var) | //use fbi->fb Fix it by ensuring that the work is canceled before proceeding with the cleanup in pxafb_remove. Note that only root user can remove the driver at runtime. | |||||
| CVE-2024-49903 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uaf in dbFreeBits [syzbot reported] ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 Read of size 8 at addr ffff8880229254b0 by task syz-executor357/5216 CPU: 0 UID: 0 PID: 5216 Comm: syz-executor357 Not tainted 6.11.0-rc3-syzkaller-00156-gd7a5aa4b3c00 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __mutex_lock_common kernel/locking/mutex.c:587 [inline] __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 dbFreeBits+0x7ea/0xd90 fs/jfs/jfs_dmap.c:2390 dbFreeDmap fs/jfs/jfs_dmap.c:2089 [inline] dbFree+0x35b/0x680 fs/jfs/jfs_dmap.c:409 dbDiscardAG+0x8a9/0xa20 fs/jfs/jfs_dmap.c:1650 jfs_ioc_trim+0x433/0x670 fs/jfs/jfs_discard.c:100 jfs_ioctl+0x2d0/0x3e0 fs/jfs/ioctl.c:131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 Freed by task 5218: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kfree+0x149/0x360 mm/slub.c:4594 dbUnmount+0x11d/0x190 fs/jfs/jfs_dmap.c:278 jfs_mount_rw+0x4ac/0x6a0 fs/jfs/jfs_mount.c:247 jfs_remount+0x3d1/0x6b0 fs/jfs/super.c:454 reconfigure_super+0x445/0x880 fs/super.c:1083 vfs_cmd_reconfigure fs/fsopen.c:263 [inline] vfs_fsconfig_locked fs/fsopen.c:292 [inline] __do_sys_fsconfig fs/fsopen.c:473 [inline] __se_sys_fsconfig+0xb6e/0xf80 fs/fsopen.c:345 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Analysis] There are two paths (dbUnmount and jfs_ioc_trim) that generate race condition when accessing bmap, which leads to the occurrence of uaf. Use the lock s_umount to synchronize them, in order to avoid uaf caused by race condition. | |||||
| CVE-2024-49889 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid use-after-free in ext4_ext_show_leaf() In ext4_find_extent(), path may be freed by error or be reallocated, so using a previously saved *ppath may have been freed and thus may trigger use-after-free, as follows: ext4_split_extent path = *ppath; ext4_split_extent_at(ppath) path = ext4_find_extent(ppath) ext4_split_extent_at(ppath) // ext4_find_extent fails to free path // but zeroout succeeds ext4_ext_show_leaf(inode, path) eh = path[depth].p_hdr // path use-after-free !!! Similar to ext4_split_extent_at(), we use *ppath directly as an input to ext4_ext_show_leaf(). Fix a spelling error by the way. Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly. This issue is triggered only when EXT_DEBUG is defined and therefore does not affect functionality. | |||||
| CVE-2024-49884 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix slab-use-after-free in ext4_split_extent_at() We hit the following use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ext4_split_extent_at+0xba8/0xcc0 Read of size 2 at addr ffff88810548ed08 by task kworker/u20:0/40 CPU: 0 PID: 40 Comm: kworker/u20:0 Not tainted 6.9.0-dirty #724 Call Trace: <TASK> kasan_report+0x93/0xc0 ext4_split_extent_at+0xba8/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Allocated by task 40: __kmalloc_noprof+0x1ac/0x480 ext4_find_extent+0xf3b/0x1e70 ext4_ext_map_blocks+0x188/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Freed by task 40: kfree+0xf1/0x2b0 ext4_find_extent+0xa71/0x1e70 ext4_ext_insert_extent+0xa22/0x3260 ext4_split_extent_at+0x3ef/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ================================================================== The flow of issue triggering is as follows: ext4_split_extent_at path = *ppath ext4_ext_insert_extent(ppath) ext4_ext_create_new_leaf(ppath) ext4_find_extent(orig_path) path = *orig_path read_extent_tree_block // return -ENOMEM or -EIO ext4_free_ext_path(path) kfree(path) *orig_path = NULL a. If err is -ENOMEM: ext4_ext_dirty(path + path->p_depth) // path use-after-free !!! b. If err is -EIO and we have EXT_DEBUG defined: ext4_ext_show_leaf(path) eh = path[depth].p_hdr // path also use-after-free !!! So when trying to zeroout or fix the extent length, call ext4_find_extent() to update the path. In addition we use *ppath directly as an ext4_ext_show_leaf() input to avoid possible use-after-free when EXT_DEBUG is defined, and to avoid unnecessary path updates. | |||||
| CVE-2024-49883 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ext4: aovid use-after-free in ext4_ext_insert_extent() As Ojaswin mentioned in Link, in ext4_ext_insert_extent(), if the path is reallocated in ext4_ext_create_new_leaf(), we'll use the stale path and cause UAF. Below is a sample trace with dummy values: ext4_ext_insert_extent path = *ppath = 2000 ext4_ext_create_new_leaf(ppath) ext4_find_extent(ppath) path = *ppath = 2000 if (depth > path[0].p_maxdepth) kfree(path = 2000); *ppath = path = NULL; path = kcalloc() = 3000 *ppath = 3000; return path; /* here path is still 2000, UAF! */ eh = path[depth].p_hdr ================================================================== BUG: KASAN: slab-use-after-free in ext4_ext_insert_extent+0x26d4/0x3330 Read of size 8 at addr ffff8881027bf7d0 by task kworker/u36:1/179 CPU: 3 UID: 0 PID: 179 Comm: kworker/u6:1 Not tainted 6.11.0-rc2-dirty #866 Call Trace: <TASK> ext4_ext_insert_extent+0x26d4/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 [...] Allocated by task 179: ext4_find_extent+0x81c/0x1f70 ext4_ext_map_blocks+0x146/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] Freed by task 179: kfree+0xcb/0x240 ext4_find_extent+0x7c0/0x1f70 ext4_ext_insert_extent+0xa26/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] ================================================================== So use *ppath to update the path to avoid the above problem. | |||||
| CVE-2024-49867 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: wait for fixup workers before stopping cleaner kthread during umount During unmount, at close_ctree(), we have the following steps in this order: 1) Park the cleaner kthread - this doesn't destroy the kthread, it basically halts its execution (wake ups against it work but do nothing); 2) We stop the cleaner kthread - this results in freeing the respective struct task_struct; 3) We call btrfs_stop_all_workers() which waits for any jobs running in all the work queues and then free the work queues. Syzbot reported a case where a fixup worker resulted in a crash when doing a delayed iput on its inode while attempting to wake up the cleaner at btrfs_add_delayed_iput(), because the task_struct of the cleaner kthread was already freed. This can happen during unmount because we don't wait for any fixup workers still running before we call kthread_stop() against the cleaner kthread, which stops and free all its resources. Fix this by waiting for any fixup workers at close_ctree() before we call kthread_stop() against the cleaner and run pending delayed iputs. The stack traces reported by syzbot were the following: BUG: KASAN: slab-use-after-free in __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 Read of size 8 at addr ffff8880272a8a18 by task kworker/u8:3/52 CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.12.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: btrfs-fixup btrfs_work_helper Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline] try_to_wake_up+0xb0/0x1480 kernel/sched/core.c:4154 btrfs_writepage_fixup_worker+0xc16/0xdf0 fs/btrfs/inode.c:2842 btrfs_work_helper+0x390/0xc50 fs/btrfs/async-thread.c:314 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 2: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:319 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4086 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4187 alloc_task_struct_node kernel/fork.c:180 [inline] dup_task_struct+0x57/0x8c0 kernel/fork.c:1107 copy_process+0x5d1/0x3d50 kernel/fork.c:2206 kernel_clone+0x223/0x880 kernel/fork.c:2787 kernel_thread+0x1bc/0x240 kernel/fork.c:2849 create_kthread kernel/kthread.c:412 [inline] kthreadd+0x60d/0x810 kernel/kthread.c:765 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 61: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_h ---truncated--- | |||||
| CVE-2024-49855 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nbd: fix race between timeout and normal completion If request timetout is handled by nbd_requeue_cmd(), normal completion has to be stopped for avoiding to complete this requeued request, other use-after-free can be triggered. Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime make sure that cmd->lock is grabbed for clearing the flag and the requeue. | |||||
| CVE-2024-49854 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix uaf for accessing waker_bfqq after splitting After commit 42c306ed7233 ("block, bfq: don't break merge chain in bfq_split_bfqq()"), if the current procress is the last holder of bfqq, the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq may in the merge chain of bfqq, hence just recored waker_bfqq is still not safe. Fix the problem by adding a helper bfq_waker_bfqq() to check if bfqq->waker_bfqq is in the merge chain, and current procress is the only holder. | |||||
| CVE-2024-49852 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: elx: libefc: Fix potential use after free in efc_nport_vport_del() The kref_put() function will call nport->release if the refcount drops to zero. The nport->release release function is _efc_nport_free() which frees "nport". But then we dereference "nport" on the next line which is a use after free. Re-order these lines to avoid the use after free. | |||||
| CVE-2024-47750 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix Use-After-Free of rsv_qp on HIP08 Currently rsv_qp is freed before ib_unregister_device() is called on HIP08. During the time interval, users can still dereg MR and rsv_qp will be used in this process, leading to a UAF. Move the release of rsv_qp after calling ib_unregister_device() to fix it. | |||||
| CVE-2024-47748 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: vhost_vdpa: assign irq bypass producer token correctly We used to call irq_bypass_unregister_producer() in vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the token pointer is still valid or not. Actually, we use the eventfd_ctx as the token so the life cycle of the token should be bound to the VHOST_SET_VRING_CALL instead of vhost_vdpa_setup_vq_irq() which could be called by set_status(). Fixing this by setting up irq bypass producer's token when handling VHOST_SET_VRING_CALL and un-registering the producer before calling vhost_vring_ioctl() to prevent a possible use after free as eventfd could have been released in vhost_vring_ioctl(). And such registering and unregistering will only be done if DRIVER_OK is set. | |||||