Total
8058 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-40900 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: remove requests from xarray during flushing requests Even with CACHEFILES_DEAD set, we can still read the requests, so in the following concurrency the request may be used after it has been freed: mount | daemon_thread1 | daemon_thread2 ------------------------------------------------------------ cachefiles_ondemand_init_object cachefiles_ondemand_send_req REQ_A = kzalloc(sizeof(*req) + data_len) wait_for_completion(&REQ_A->done) cachefiles_daemon_read cachefiles_ondemand_daemon_read // close dev fd cachefiles_flush_reqs complete(&REQ_A->done) kfree(REQ_A) xa_lock(&cache->reqs); cachefiles_ondemand_select_req req->msg.opcode != CACHEFILES_OP_READ // req use-after-free !!! xa_unlock(&cache->reqs); xa_destroy(&cache->reqs) Hence remove requests from cache->reqs when flushing them to avoid accessing freed requests. | |||||
| CVE-2024-39503 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type Lion Ackermann reported that there is a race condition between namespace cleanup in ipset and the garbage collection of the list:set type. The namespace cleanup can destroy the list:set type of sets while the gc of the set type is waiting to run in rcu cleanup. The latter uses data from the destroyed set which thus leads use after free. The patch contains the following parts: - When destroying all sets, first remove the garbage collectors, then wait if needed and then destroy the sets. - Fix the badly ordered "wait then remove gc" for the destroy a single set case. - Fix the missing rcu locking in the list:set type in the userspace test case. - Use proper RCU list handlings in the list:set type. The patch depends on c1193d9bbbd3 (netfilter: ipset: Add list flush to cancel_gc). | |||||
| CVE-2024-39502 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ionic: fix use after netif_napi_del() When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L <interface name> rx 1 tx 1 combined 0 ethtool -L <interface name> rx 0 tx 0 combined 1 ethtool -L <interface name> rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 | |||||
| CVE-2024-39496 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free due to race with dev replace While loading a zone's info during creation of a block group, we can race with a device replace operation and then trigger a use-after-free on the device that was just replaced (source device of the replace operation). This happens because at btrfs_load_zone_info() we extract a device from the chunk map into a local variable and then use the device while not under the protection of the device replace rwsem. So if there's a device replace operation happening when we extract the device and that device is the source of the replace operation, we will trigger a use-after-free if before we finish using the device the replace operation finishes and frees the device. Fix this by enlarging the critical section under the protection of the device replace rwsem so that all uses of the device are done inside the critical section. | |||||
| CVE-2024-39494 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ima: Fix use-after-free on a dentry's dname.name ->d_name.name can change on rename and the earlier value can be freed; there are conditions sufficient to stabilize it (->d_lock on dentry, ->d_lock on its parent, ->i_rwsem exclusive on the parent's inode, rename_lock), but none of those are met at any of the sites. Take a stable snapshot of the name instead. | |||||
| CVE-2024-39486 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/drm_file: Fix pid refcounting race <maarten.lankhorst@linux.intel.com>, Maxime Ripard <mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de> filp->pid is supposed to be a refcounted pointer; however, before this patch, drm_file_update_pid() only increments the refcount of a struct pid after storing a pointer to it in filp->pid and dropping the dev->filelist_mutex, making the following race possible: process A process B ========= ========= begin drm_file_update_pid mutex_lock(&dev->filelist_mutex) rcu_replace_pointer(filp->pid, <pid B>, 1) mutex_unlock(&dev->filelist_mutex) begin drm_file_update_pid mutex_lock(&dev->filelist_mutex) rcu_replace_pointer(filp->pid, <pid A>, 1) mutex_unlock(&dev->filelist_mutex) get_pid(<pid A>) synchronize_rcu() put_pid(<pid B>) *** pid B reaches refcount 0 and is freed here *** get_pid(<pid B>) *** UAF *** synchronize_rcu() put_pid(<pid A>) As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y because it requires RCU to detect a quiescent state in code that is not explicitly calling into the scheduler. This race leads to use-after-free of a "struct pid". It is probably somewhat hard to hit because process A has to pass through a synchronize_rcu() operation while process B is between mutex_unlock() and get_pid(). Fix it by ensuring that by the time a pointer to the current task's pid is stored in the file, an extra reference to the pid has been taken. This fix also removes the condition for synchronize_rcu(); I think that optimization is unnecessary complexity, since in that case we would usually have bailed out on the lockless check above. | |||||
| CVE-2024-38612 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix invalid unregister error path The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL is not defined. In that case if seg6_hmac_init() fails, the genl_unregister_family() isn't called. This issue exist since commit 46738b1317e1 ("ipv6: sr: add option to control lwtunnel support"), and commit 5559cea2d5aa ("ipv6: sr: fix possible use-after-free and null-ptr-deref") replaced unregister_pernet_subsys() with genl_unregister_family() in this error path. | |||||
| CVE-2024-38610 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drivers/virt/acrn: fix PFNMAP PTE checks in acrn_vm_ram_map() Patch series "mm: follow_pte() improvements and acrn follow_pte() fixes". Patch #1 fixes a bunch of issues I spotted in the acrn driver. It compiles, that's all I know. I'll appreciate some review and testing from acrn folks. Patch #2+#3 improve follow_pte(), passing a VMA instead of the MM, adding more sanity checks, and improving the documentation. Gave it a quick test on x86-64 using VM_PAT that ends up using follow_pte(). This patch (of 3): We currently miss handling various cases, resulting in a dangerous follow_pte() (previously follow_pfn()) usage. (1) We're not checking PTE write permissions. Maybe we should simply always require pte_write() like we do for pin_user_pages_fast(FOLL_WRITE)? Hard to tell, so let's check for ACRN_MEM_ACCESS_WRITE for now. (2) We're not rejecting refcounted pages. As we are not using MMU notifiers, messing with refcounted pages is dangerous and can result in use-after-free. Let's make sure to reject them. (3) We are only looking at the first PTE of a bigger range. We only lookup a single PTE, but memmap->len may span a larger area. Let's loop over all involved PTEs and make sure the PFN range is actually contiguous. Reject everything else: it couldn't have worked either way, and rather made use access PFNs we shouldn't be accessing. | |||||
| CVE-2024-38583 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free of timer for log writer thread Patch series "nilfs2: fix log writer related issues". This bug fix series covers three nilfs2 log writer-related issues, including a timer use-after-free issue and potential deadlock issue on unmount, and a potential freeze issue in event synchronization found during their analysis. Details are described in each commit log. This patch (of 3): A use-after-free issue has been reported regarding the timer sc_timer on the nilfs_sc_info structure. The problem is that even though it is used to wake up a sleeping log writer thread, sc_timer is not shut down until the nilfs_sc_info structure is about to be freed, and is used regardless of the thread's lifetime. Fix this issue by limiting the use of sc_timer only while the log writer thread is alive. | |||||
| CVE-2024-38581 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/mes: fix use-after-free issue Delete fence fallback timer to fix the ramdom use-after-free issue. v2: move to amdgpu_mes.c | |||||
| CVE-2024-38570 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix potential glock use-after-free on unmount When a DLM lockspace is released and there ares still locks in that lockspace, DLM will unlock those locks automatically. Commit fb6791d100d1b started exploiting this behavior to speed up filesystem unmount: gfs2 would simply free glocks it didn't want to unlock and then release the lockspace. This didn't take the bast callbacks for asynchronous lock contention notifications into account, which remain active until until a lock is unlocked or its lockspace is released. To prevent those callbacks from accessing deallocated objects, put the glocks that should not be unlocked on the sd_dead_glocks list, release the lockspace, and only then free those glocks. As an additional measure, ignore unexpected ast and bast callbacks if the receiving glock is dead. | |||||
| CVE-2024-38555 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Discard command completions in internal error Fix use after free when FW completion arrives while device is in internal error state. Avoid calling completion handler in this case, since the device will flush the command interface and trigger all completions manually. Kernel log: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0xd8/0xe0 ... Call Trace: <IRQ> ? __warn+0x79/0x120 ? refcount_warn_saturate+0xd8/0xe0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0xd8/0xe0 cmd_ent_put+0x13b/0x160 [mlx5_core] mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core] cmd_comp_notifier+0x1f/0x30 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 mlx5_eq_async_int+0xf6/0x290 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x4b/0x160 handle_irq_event+0x2e/0x80 handle_edge_irq+0x98/0x230 __common_interrupt+0x3b/0xa0 common_interrupt+0x7b/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 | |||||
| CVE-2024-38545 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix UAF for cq async event The refcount of CQ is not protected by locks. When CQ asynchronous events and CQ destruction are concurrent, CQ may have been released, which will cause UAF. Use the xa_lock() to protect the CQ refcount. | |||||
| CVE-2024-38544 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix seg fault in rxe_comp_queue_pkt In rxe_comp_queue_pkt() an incoming response packet skb is enqueued to the resp_pkts queue and then a decision is made whether to run the completer task inline or schedule it. Finally the skb is dereferenced to bump a 'hw' performance counter. This is wrong because if the completer task is already running in a separate thread it may have already processed the skb and freed it which can cause a seg fault. This has been observed infrequently in testing at high scale. This patch fixes this by changing the order of enqueuing the packet until after the counter is accessed. | |||||
| CVE-2024-38385 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() irq_find_at_or_after() dereferences the interrupt descriptor which is returned by mt_find() while neither holding sparse_irq_lock nor RCU read lock, which means the descriptor can be freed between mt_find() and the dereference: CPU0 CPU1 desc = mt_find() delayed_free_desc(desc) irq_desc_get_irq(desc) The use-after-free is reported by KASAN: Call trace: irq_get_next_irq+0x58/0x84 show_stat+0x638/0x824 seq_read_iter+0x158/0x4ec proc_reg_read_iter+0x94/0x12c vfs_read+0x1e0/0x2c8 Freed by task 4471: slab_free_freelist_hook+0x174/0x1e0 __kmem_cache_free+0xa4/0x1dc kfree+0x64/0x128 irq_kobj_release+0x28/0x3c kobject_put+0xcc/0x1e0 delayed_free_desc+0x14/0x2c rcu_do_batch+0x214/0x720 Guard the access with a RCU read lock section. | |||||
| CVE-2024-36979 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mst: fix vlan use-after-free syzbot reported a suspicious rcu usage[1] in bridge's mst code. While fixing it I noticed that nothing prevents a vlan to be freed while walking the list from the same path (br forward delay timer). Fix the rcu usage and also make sure we are not accessing freed memory by making br_mst_vlan_set_state use rcu read lock. [1] WARNING: suspicious RCU usage 6.9.0-rc6-syzkaller #0 Not tainted ----------------------------- net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage! ... stack backtrace: CPU: 1 PID: 8017 Comm: syz-executor.1 Not tainted 6.9.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nbp_vlan_group net/bridge/br_private.h:1599 [inline] br_mst_set_state+0x1ea/0x650 net/bridge/br_mst.c:105 br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47 br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1793 expire_timers kernel/time/timer.c:1844 [inline] __run_timers kernel/time/timer.c:2418 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2429 run_timer_base kernel/time/timer.c:2438 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2448 __do_softirq+0x2c6/0x980 kernel/softirq.c:554 invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf2/0x1c0 kernel/softirq.c:633 irq_exit_rcu+0x9/0x30 kernel/softirq.c:645 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 RIP: 0010:lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758 Code: 2b 00 74 08 4c 89 f7 e8 ba d1 84 00 f6 44 24 61 02 0f 85 85 01 00 00 41 f7 c7 00 02 00 00 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 25 00 00 00 00 00 43 c7 44 25 09 00 00 00 00 43 c7 44 25 RSP: 0018:ffffc90013657100 EFLAGS: 00000206 RAX: 0000000000000001 RBX: 1ffff920026cae2c RCX: 0000000000000001 RDX: dffffc0000000000 RSI: ffffffff8bcaca00 RDI: ffffffff8c1eaa60 RBP: ffffc90013657260 R08: ffffffff92efe507 R09: 1ffffffff25dfca0 R10: dffffc0000000000 R11: fffffbfff25dfca1 R12: 1ffff920026cae28 R13: dffffc0000000000 R14: ffffc90013657160 R15: 0000000000000246 | |||||
| CVE-2024-36904 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Use refcount_inc_not_zero() in tcp_twsk_unique(). Anderson Nascimento reported a use-after-free splat in tcp_twsk_unique() with nice analysis. Since commit ec94c2696f0b ("tcp/dccp: avoid one atomic operation for timewait hashdance"), inet_twsk_hashdance() sets TIME-WAIT socket's sk_refcnt after putting it into ehash and releasing the bucket lock. Thus, there is a small race window where other threads could try to reuse the port during connect() and call sock_hold() in tcp_twsk_unique() for the TIME-WAIT socket with zero refcnt. If that happens, the refcnt taken by tcp_twsk_unique() is overwritten and sock_put() will cause underflow, triggering a real use-after-free somewhere else. To avoid the use-after-free, we need to use refcount_inc_not_zero() in tcp_twsk_unique() and give up on reusing the port if it returns false. [0]: refcount_t: addition on 0; use-after-free. WARNING: CPU: 0 PID: 1039313 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110 CPU: 0 PID: 1039313 Comm: trigger Not tainted 6.8.6-200.fc39.x86_64 #1 Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.21805430.B64.2305221830 05/22/2023 RIP: 0010:refcount_warn_saturate+0xe5/0x110 Code: 42 8e ff 0f 0b c3 cc cc cc cc 80 3d aa 13 ea 01 00 0f 85 5e ff ff ff 48 c7 c7 f8 8e b7 82 c6 05 96 13 ea 01 01 e8 7b 42 8e ff <0f> 0b c3 cc cc cc cc 48 c7 c7 50 8f b7 82 c6 05 7a 13 ea 01 01 e8 RSP: 0018:ffffc90006b43b60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888009bb3ef0 RCX: 0000000000000027 RDX: ffff88807be218c8 RSI: 0000000000000001 RDI: ffff88807be218c0 RBP: 0000000000069d70 R08: 0000000000000000 R09: ffffc90006b439f0 R10: ffffc90006b439e8 R11: 0000000000000003 R12: ffff8880029ede84 R13: 0000000000004e20 R14: ffffffff84356dc0 R15: ffff888009bb3ef0 FS: 00007f62c10926c0(0000) GS:ffff88807be00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020ccb000 CR3: 000000004628c005 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <TASK> ? refcount_warn_saturate+0xe5/0x110 ? __warn+0x81/0x130 ? refcount_warn_saturate+0xe5/0x110 ? report_bug+0x171/0x1a0 ? refcount_warn_saturate+0xe5/0x110 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? refcount_warn_saturate+0xe5/0x110 tcp_twsk_unique+0x186/0x190 __inet_check_established+0x176/0x2d0 __inet_hash_connect+0x74/0x7d0 ? __pfx___inet_check_established+0x10/0x10 tcp_v4_connect+0x278/0x530 __inet_stream_connect+0x10f/0x3d0 inet_stream_connect+0x3a/0x60 __sys_connect+0xa8/0xd0 __x64_sys_connect+0x18/0x20 do_syscall_64+0x83/0x170 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7f62c11a885d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a3 45 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007f62c1091e58 EFLAGS: 00000296 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020ccb004 RCX: 00007f62c11a885d RDX: 0000000000000010 RSI: 0000000020ccb000 RDI: 0000000000000003 RBP: 00007f62c1091e90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 00007f62c10926c0 R13: ffffffffffffff88 R14: 0000000000000000 R15: 00007ffe237885b0 </TASK> | |||||
| CVE-2024-36886 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-08-04 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in error path Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported a UAF in the tipc_buf_append() error path: BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183 Read of size 8 at addr ffff88804d2a7c80 by task poc/8034 CPU: 1 PID: 8034 Comm: poc Not tainted 6.8.2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 Call Trace: <IRQ> __dump_stack linux/lib/dump_stack.c:88 dump_stack_lvl+0xd9/0x1b0 linux/lib/dump_stack.c:106 print_address_description linux/mm/kasan/report.c:377 print_report+0xc4/0x620 linux/mm/kasan/report.c:488 kasan_report+0xda/0x110 linux/mm/kasan/report.c:601 kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183 skb_release_data+0x5af/0x880 linux/net/core/skbuff.c:1026 skb_release_all linux/net/core/skbuff.c:1094 __kfree_skb linux/net/core/skbuff.c:1108 kfree_skb_reason+0x12d/0x210 linux/net/core/skbuff.c:1144 kfree_skb linux/./include/linux/skbuff.h:1244 tipc_buf_append+0x425/0xb50 linux/net/tipc/msg.c:186 tipc_link_input+0x224/0x7c0 linux/net/tipc/link.c:1324 tipc_link_rcv+0x76e/0x2d70 linux/net/tipc/link.c:1824 tipc_rcv+0x45f/0x10f0 linux/net/tipc/node.c:2159 tipc_udp_recv+0x73b/0x8f0 linux/net/tipc/udp_media.c:390 udp_queue_rcv_one_skb+0xad2/0x1850 linux/net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x131/0xb00 linux/net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x165/0x3b0 linux/net/ipv4/udp.c:2346 __udp4_lib_rcv+0x2594/0x3400 linux/net/ipv4/udp.c:2422 ip_protocol_deliver_rcu+0x30c/0x4e0 linux/net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2e4/0x520 linux/net/ipv4/ip_input.c:233 NF_HOOK linux/./include/linux/netfilter.h:314 NF_HOOK linux/./include/linux/netfilter.h:308 ip_local_deliver+0x18e/0x1f0 linux/net/ipv4/ip_input.c:254 dst_input linux/./include/net/dst.h:461 ip_rcv_finish linux/net/ipv4/ip_input.c:449 NF_HOOK linux/./include/linux/netfilter.h:314 NF_HOOK linux/./include/linux/netfilter.h:308 ip_rcv+0x2c5/0x5d0 linux/net/ipv4/ip_input.c:569 __netif_receive_skb_one_core+0x199/0x1e0 linux/net/core/dev.c:5534 __netif_receive_skb+0x1f/0x1c0 linux/net/core/dev.c:5648 process_backlog+0x101/0x6b0 linux/net/core/dev.c:5976 __napi_poll.constprop.0+0xba/0x550 linux/net/core/dev.c:6576 napi_poll linux/net/core/dev.c:6645 net_rx_action+0x95a/0xe90 linux/net/core/dev.c:6781 __do_softirq+0x21f/0x8e7 linux/kernel/softirq.c:553 do_softirq linux/kernel/softirq.c:454 do_softirq+0xb2/0xf0 linux/kernel/softirq.c:441 </IRQ> <TASK> __local_bh_enable_ip+0x100/0x120 linux/kernel/softirq.c:381 local_bh_enable linux/./include/linux/bottom_half.h:33 rcu_read_unlock_bh linux/./include/linux/rcupdate.h:851 __dev_queue_xmit+0x871/0x3ee0 linux/net/core/dev.c:4378 dev_queue_xmit linux/./include/linux/netdevice.h:3169 neigh_hh_output linux/./include/net/neighbour.h:526 neigh_output linux/./include/net/neighbour.h:540 ip_finish_output2+0x169f/0x2550 linux/net/ipv4/ip_output.c:235 __ip_finish_output linux/net/ipv4/ip_output.c:313 __ip_finish_output+0x49e/0x950 linux/net/ipv4/ip_output.c:295 ip_finish_output+0x31/0x310 linux/net/ipv4/ip_output.c:323 NF_HOOK_COND linux/./include/linux/netfilter.h:303 ip_output+0x13b/0x2a0 linux/net/ipv4/ip_output.c:433 dst_output linux/./include/net/dst.h:451 ip_local_out linux/net/ipv4/ip_output.c:129 ip_send_skb+0x3e5/0x560 linux/net/ipv4/ip_output.c:1492 udp_send_skb+0x73f/0x1530 linux/net/ipv4/udp.c:963 udp_sendmsg+0x1a36/0x2b40 linux/net/ipv4/udp.c:1250 inet_sendmsg+0x105/0x140 linux/net/ipv4/af_inet.c:850 sock_sendmsg_nosec linux/net/socket.c:730 __sock_sendmsg linux/net/socket.c:745 __sys_sendto+0x42c/0x4e0 linux/net/socket.c:2191 __do_sys_sendto linux/net/socket.c:2203 __se_sys_sendto linux/net/socket.c:2199 __x64_sys_sendto+0xe0/0x1c0 linux/net/socket.c:2199 do_syscall_x64 linux/arch/x86/entry/common.c:52 do_syscall_ ---truncated--- | |||||
| CVE-2024-36013 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect() Extend a critical section to prevent chan from early freeing. Also make the l2cap_connect() return type void. Nothing is using the returned value but it is ugly to return a potentially freed pointer. Making it void will help with backports because earlier kernels did use the return value. Now the compile will break for kernels where this patch is not a complete fix. Call stack summary: [use] l2cap_bredr_sig_cmd l2cap_connect ┌ mutex_lock(&conn->chan_lock); │ chan = pchan->ops->new_connection(pchan); <- alloc chan │ __l2cap_chan_add(conn, chan); │ l2cap_chan_hold(chan); │ list_add(&chan->list, &conn->chan_l); ... (1) └ mutex_unlock(&conn->chan_lock); chan->conf_state ... (4) <- use after free [free] l2cap_conn_del ┌ mutex_lock(&conn->chan_lock); │ foreach chan in conn->chan_l: ... (2) │ l2cap_chan_put(chan); │ l2cap_chan_destroy │ kfree(chan) ... (3) <- chan freed └ mutex_unlock(&conn->chan_lock); ================================================================== BUG: KASAN: slab-use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: slab-use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0 net/bluetooth/l2cap_core.c:4260 Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311 | |||||
| CVE-2024-36012 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: msft: fix slab-use-after-free in msft_do_close() Tying the msft->data lifetime to hdev by freeing it in hci_release_dev() to fix the following case: [use] msft_do_close() msft = hdev->msft_data; if (!msft) ...(1) <- passed. return; mutex_lock(&msft->filter_lock); ...(4) <- used after freed. [free] msft_unregister() msft = hdev->msft_data; hdev->msft_data = NULL; ...(2) kfree(msft); ...(3) <- msft is freed. ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30 kernel/locking/mutex.c:752 Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309 | |||||