Total
5638 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-48790 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix a possible use-after-free in controller reset during load Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl readiness for AER submission. This may lead to a use-after-free condition that was observed with nvme-tcp. The race condition may happen in the following scenario: 1. driver executes its reset_ctrl_work 2. -> nvme_stop_ctrl - flushes ctrl async_event_work 3. ctrl sends AEN which is received by the host, which in turn schedules AEN handling 4. teardown admin queue (which releases the queue socket) 5. AEN processed, submits another AER, calling the driver to submit 6. driver attempts to send the cmd ==> use-after-free In order to fix that, add ctrl state check to validate the ctrl is actually able to accept the AER submission. This addresses the above race in controller resets because the driver during teardown should: 1. change ctrl state to RESETTING 2. flush async_event_work (as well as other async work elements) So after 1,2, any other AER command will find the ctrl state to be RESETTING and bail out without submitting the AER. | |||||
| CVE-2022-48789 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix possible use-after-free in transport error_recovery work While nvme_tcp_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. | |||||
| CVE-2022-48787 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iwlwifi: fix use-after-free If no firmware was present at all (or, presumably, all of the firmware files failed to parse), we end up unbinding by calling device_release_driver(), which calls remove(), which then in iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However the new code I added will still erroneously access it after it was freed. Set 'failure=false' in this case to avoid the access, all data was already freed anyway. | |||||
| CVE-2022-48783 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: fix use after free in gswip_remove() of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be done before mdiobus_free(priv->ds->slave_mii_bus). | |||||
| CVE-2022-48782 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mctp: fix use after free Clang static analysis reports this problem route.c:425:4: warning: Use of memory after it is freed trace_mctp_key_acquire(key); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ When mctp_key_add() fails, key is freed but then is later used in trace_mctp_key_acquire(). Add an else statement to use the key only when mctp_key_add() is successful. | |||||
| CVE-2022-48779 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: fix use-after-free in ocelot_vlan_del() ocelot_vlan_member_del() will free the struct ocelot_bridge_vlan, so if this is the same as the port's pvid_vlan which we access afterwards, what we're accessing is freed memory. Fix the bug by determining whether to clear ocelot_port->pvid_vlan prior to calling ocelot_vlan_member_del(). | |||||
| CVE-2022-48742 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink() While looking at one unrelated syzbot bug, I found the replay logic in __rtnl_newlink() to potentially trigger use-after-free. It is better to clear master_dev and m_ops inside the loop, in case we have to replay it. | |||||
| CVE-2022-48726 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Protect mc during concurrent multicast leaves Partially revert the commit mentioned in the Fixes line to make sure that allocation and erasing multicast struct are locked. BUG: KASAN: use-after-free in ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] BUG: KASAN: use-after-free in ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 Read of size 8 at addr ffff88801bb74b00 by task syz-executor.1/25529 CPU: 0 PID: 25529 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 ucma_destroy_id+0x1e6/0x280 drivers/infiniband/core/ucma.c:614 ucma_write+0x25c/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xae0 fs/read_write.c:588 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Currently the xarray search can touch a concurrently freeing mc as the xa_for_each() is not surrounded by any lock. Rather than hold the lock for a full scan hold it only for the effected items, which is usually an empty list. | |||||
| CVE-2022-48626 | 1 Linux | 1 Linux Kernel | 2024-11-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: moxart: fix potential use-after-free on remove path It was reported that the mmc host structure could be accessed after it was freed in moxart_remove(), so fix this by saving the base register of the device and using it instead of the pointer dereference. | |||||
| CVE-2022-48560 | 2 Debian, Python | 2 Debian Linux, Python | 2024-11-21 | N/A | 7.5 HIGH |
| A use-after-free exists in Python through 3.9 via heappushpop in heapq. | |||||
| CVE-2022-48512 | 1 Huawei | 2 Emui, Harmonyos | 2024-11-21 | N/A | 9.8 CRITICAL |
| Use After Free (UAF) vulnerability in the Vdecoderservice service. Successful exploitation of this vulnerability may cause the image decoding feature to perform abnormally. | |||||
| CVE-2022-48511 | 1 Huawei | 2 Emui, Harmonyos | 2024-11-21 | N/A | 9.8 CRITICAL |
| Use After Free (UAF) vulnerability in the audio PCM driver module under special conditions. Successful exploitation of this vulnerability may cause audio features to perform abnormally. | |||||
| CVE-2022-48434 | 1 Ffmpeg | 1 Ffmpeg | 2024-11-21 | N/A | 8.1 HIGH |
| libavcodec/pthread_frame.c in FFmpeg before 5.1.2, as used in VLC and other products, leaves stale hwaccel state in worker threads, which allows attackers to trigger a use-after-free and execute arbitrary code in some circumstances (e.g., hardware re-initialization upon a mid-video SPS change when Direct3D11 is used). | |||||
| CVE-2022-47460 | 2 Google, Unisoc | 14 Android, S8000, Sc7731e and 11 more | 2024-11-21 | N/A | 5.5 MEDIUM |
| In gpu device, there is a memory corruption due to a use after free. This could lead to local denial of service in kernel. | |||||
| CVE-2022-46891 | 1 Arm | 3 Bifrost Gpu Kernel Driver, Midgard Gpu Kernel Driver, Valhall Gpu Kernel Driver | 2024-11-21 | N/A | 8.8 HIGH |
| An issue was discovered in the Arm Mali GPU Kernel Driver. There is a use-after-free. A non-privileged user can make improper GPU processing operations to gain access to already freed memory. This affects Midgard r13p0 through r32p0, Bifrost r1p0 through r40p0, and Valhall r19p0 through r40p0. | |||||
| CVE-2022-46884 | 1 Mozilla | 1 Firefox | 2024-11-21 | N/A | 8.8 HIGH |
| A potential use-after-free vulnerability existed in SVG Images if the Refresh Driver was destroyed at an inopportune time. This could have lead to memory corruption or a potentially exploitable crash. *Note*: This advisory was added on December 13th, 2022 after discovering it was inadvertently left out of the original advisory. The fix was included in the original release of Firefox 106. This vulnerability affects Firefox < 106. | |||||
| CVE-2022-46712 | 1 Apple | 1 Macos | 2024-11-21 | N/A | 7.8 HIGH |
| A use after free issue was addressed with improved memory management. This issue is fixed in macOS Ventura 13. An app may be able to cause unexpected system termination or potentially execute code with kernel privileges. | |||||
| CVE-2022-46395 | 1 Arm | 4 Avalon Gpu Kernel Driver, Bifrost Gpu Kernel Driver, Midgard Gpu Kernel Driver and 1 more | 2024-11-21 | N/A | 8.8 HIGH |
| An issue was discovered in the Arm Mali GPU Kernel Driver. A non-privileged user can make improper GPU processing operations to gain access to already freed memory. This affects Midgard r0p0 through r32p0, Bifrost r0p0 through r41p0 before r42p0, Valhall r19p0 through r41p0 before r42p0, and Avalon r41p0 before r42p0. | |||||
| CVE-2022-45919 | 2 Linux, Netapp | 11 Linux Kernel, H300s, H300s Firmware and 8 more | 2024-11-21 | N/A | 7.0 HIGH |
| An issue was discovered in the Linux kernel through 6.0.10. In drivers/media/dvb-core/dvb_ca_en50221.c, a use-after-free can occur is there is a disconnect after an open, because of the lack of a wait_event. | |||||
| CVE-2022-45888 | 2 Linux, Netapp | 11 Linux Kernel, H300s, H300s Firmware and 8 more | 2024-11-21 | N/A | 6.4 MEDIUM |
| An issue was discovered in the Linux kernel through 6.0.9. drivers/char/xillybus/xillyusb.c has a race condition and use-after-free during physical removal of a USB device. | |||||