Total
400 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-48754 | 1 Fractalfir | 1 Memory Pages | 2026-01-30 | N/A | 2.9 LOW |
| In the memory_pages crate 0.1.0 for Rust, division by zero can occur. | |||||
| CVE-2025-71006 | 2026-01-29 | N/A | 6.5 MEDIUM | ||
| A floating point exception (FPE) in the oneflow.reshape component of OneFlow v0.9.0 allows attackers to cause a Denial of Service (DoS) via a crafted input. | |||||
| CVE-2025-71005 | 2026-01-29 | N/A | 6.5 MEDIUM | ||
| A floating point exception (FPE) in the oneflow.view component of OneFlow v0.9.0 allows attackers to cause a Denial of Service (DoS) via a crafted input. | |||||
| CVE-2025-71002 | 2026-01-29 | N/A | 6.5 MEDIUM | ||
| A floating-point exception (FPE) in the flow.column_stack component of OneFlow v0.9.0 allows attackers to cause a Denial of Service (DoS) via a crafted input. | |||||
| CVE-2026-24826 | 2026-01-27 | N/A | N/A | ||
| Out-of-bounds Write, Divide By Zero, NULL Pointer Dereference, Use of Uninitialized Resource, Out-of-bounds Read, Reachable Assertion vulnerability in cadaver turso3d.This issue affects . | |||||
| CVE-2021-28856 | 1 Entropymine | 1 Deark | 2026-01-26 | 4.3 MEDIUM | 5.5 MEDIUM |
| In Deark before v1.5.8, a specially crafted input file can cause a division by zero in (src/fmtutil.c) because of the value of pixelsize. | |||||
| CVE-2024-36905 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets TCP_SYN_RECV state is really special, it is only used by cross-syn connections, mostly used by fuzzers. In the following crash [1], syzbot managed to trigger a divide by zero in tcp_rcv_space_adjust() A socket makes the following state transitions, without ever calling tcp_init_transfer(), meaning tcp_init_buffer_space() is also not called. TCP_CLOSE connect() TCP_SYN_SENT TCP_SYN_RECV shutdown() -> tcp_shutdown(sk, SEND_SHUTDOWN) TCP_FIN_WAIT1 To fix this issue, change tcp_shutdown() to not perform a TCP_SYN_RECV -> TCP_FIN_WAIT1 transition, which makes no sense anyway. When tcp_rcv_state_process() later changes socket state from TCP_SYN_RECV to TCP_ESTABLISH, then look at sk->sk_shutdown to finally enter TCP_FIN_WAIT1 state, and send a FIN packet from a sane socket state. This means tcp_send_fin() can now be called from BH context, and must use GFP_ATOMIC allocations. [1] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 5084 Comm: syz-executor358 Not tainted 6.9.0-rc6-syzkaller-00022-g98369dccd2f8 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:tcp_rcv_space_adjust+0x2df/0x890 net/ipv4/tcp_input.c:767 Code: e3 04 4c 01 eb 48 8b 44 24 38 0f b6 04 10 84 c0 49 89 d5 0f 85 a5 03 00 00 41 8b 8e c8 09 00 00 89 e8 29 c8 48 0f af c3 31 d2 <48> f7 f1 48 8d 1c 43 49 8d 96 76 08 00 00 48 89 d0 48 c1 e8 03 48 RSP: 0018:ffffc900031ef3f0 EFLAGS: 00010246 RAX: 0c677a10441f8f42 RBX: 000000004fb95e7e RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000027d4b11f R08: ffffffff89e535a4 R09: 1ffffffff25e6ab7 R10: dffffc0000000000 R11: ffffffff8135e920 R12: ffff88802a9f8d30 R13: dffffc0000000000 R14: ffff88802a9f8d00 R15: 1ffff1100553f2da FS: 00005555775c0380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1155bf2304 CR3: 000000002b9f2000 CR4: 0000000000350ef0 Call Trace: <TASK> tcp_recvmsg_locked+0x106d/0x25a0 net/ipv4/tcp.c:2513 tcp_recvmsg+0x25d/0x920 net/ipv4/tcp.c:2578 inet6_recvmsg+0x16a/0x730 net/ipv6/af_inet6.c:680 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x109/0x280 net/socket.c:1068 ____sys_recvmsg+0x1db/0x470 net/socket.c:2803 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x474/0xae0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7faeb6363db9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcc1997168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faeb6363db9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000001c R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000001 | |||||
| CVE-2025-39916 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-16 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/reclaim: avoid divide-by-zero in damon_reclaim_apply_parameters() When creating a new scheme of DAMON_RECLAIM, the calculation of 'min_age_region' uses 'aggr_interval' as the divisor, which may lead to division-by-zero errors. Fix it by directly returning -EINVAL when such a case occurs. | |||||
| CVE-2025-39909 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-16 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters() Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters application". DAMON's RECLAIM and LRU_SORT modules perform no validation on user-configured parameters during application, which may lead to division-by-zero errors. Avoid the divide-by-zero by adding validation checks when DAMON modules attempt to apply the parameters. This patch (of 2): During the calculation of 'hot_thres' and 'cold_thres', either 'sample_interval' or 'aggr_interval' is used as the divisor, which may lead to division-by-zero errors. Fix it by directly returning -EINVAL when such a case occurs. Additionally, since 'aggr_interval' is already required to be set no smaller than 'sample_interval' in damon_set_attrs(), only the case where 'sample_interval' is zero needs to be checked. | |||||
| CVE-2026-21495 | 1 Color | 1 Iccdev | 2026-01-09 | N/A | 5.5 MEDIUM |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to version 2.3.1.2, iccDEV is vulnerable to division by zero in the TIFF Image Reader. This issue has been patched in version 2.3.1.2. | |||||
| CVE-2025-65409 | 1 Gnu | 1 Recutils | 2026-01-09 | N/A | 7.5 HIGH |
| A divide-by-zero in the encryption/decryption routines of GNU Recutils v1.9 allows attackers to cause a Denial of Service (DoS) via inputting an empty value as a password. | |||||
| CVE-2025-39742 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-01-09 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA: hfi1: fix possible divide-by-zero in find_hw_thread_mask() The function divides number of online CPUs by num_core_siblings, and later checks the divider by zero. This implies a possibility to get and divide-by-zero runtime error. Fix it by moving the check prior to division. This also helps to save one indentation level. | |||||
| CVE-2025-38312 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: core: fbcvt: avoid division by 0 in fb_cvt_hperiod() In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000, cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It's then passed to fb_cvt_hperiod(), where it's used as a divider -- division by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to avoid such overflow... Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. | |||||
| CVE-2025-37937 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds() If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result is a divide-by-zero. Prevent that from happening. Fixes the following warning with an UBSAN kernel: drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx() | |||||
| CVE-2025-38126 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: make sure that ptp_rate is not 0 before configuring timestamping The stmmac platform drivers that do not open-code the clk_ptp_rate value after having retrieved the default one from the device-tree can end up with 0 in clk_ptp_rate (as clk_get_rate can return 0). It will eventually propagate up to PTP initialization when bringing up the interface, leading to a divide by 0: Division by zero in kernel. CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.30-00001-g48313bd5768a #22 Hardware name: STM32 (Device Tree Support) Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x6c/0x8c dump_stack_lvl from Ldiv0_64+0x8/0x18 Ldiv0_64 from stmmac_init_tstamp_counter+0x190/0x1a4 stmmac_init_tstamp_counter from stmmac_hw_setup+0xc1c/0x111c stmmac_hw_setup from __stmmac_open+0x18c/0x434 __stmmac_open from stmmac_open+0x3c/0xbc stmmac_open from __dev_open+0xf4/0x1ac __dev_open from __dev_change_flags+0x1cc/0x224 __dev_change_flags from dev_change_flags+0x24/0x60 dev_change_flags from ip_auto_config+0x2e8/0x11a0 ip_auto_config from do_one_initcall+0x84/0x33c do_one_initcall from kernel_init_freeable+0x1b8/0x214 kernel_init_freeable from kernel_init+0x24/0x140 kernel_init from ret_from_fork+0x14/0x28 Exception stack(0xe0815fb0 to 0xe0815ff8) Prevent this division by 0 by adding an explicit check and error log about the actual issue. While at it, remove the same check from stmmac_ptp_register, which then becomes duplicate | |||||
| CVE-2025-38719 | 1 Linux | 1 Linux Kernel | 2025-12-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: hibmcge: fix the division by zero issue When the network port is down, the queue is released, and ring->len is 0. In debugfs, hbg_get_queue_used_num() will be called, which may lead to a division by zero issue. This patch adds a check, if ring->len is 0, hbg_get_queue_used_num() directly returns 0. | |||||
| CVE-2022-50178 | 1 Linux | 1 Linux Kernel | 2025-11-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: 8852a: rfk: fix div 0 exception The DPK is a kind of RF calibration whose algorithm is to fine tune parameters and calibrate, and check the result. If the result isn't good enough, it could adjust parameters and try again. This issue is to read and show the result, but it could be a negative calibration result that causes divisor 0 and core dump. So, fix it by phy_div() that does division only if divisor isn't zero; otherwise, zero is adopted. divide error: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 728 Comm: wpa_supplicant Not tainted 5.10.114-16019-g462a1661811a #1 <HASH:d024 28> RIP: 0010:rtw8852a_dpk+0x14ae/0x288f [rtw89_core] RSP: 0018:ffffa9bb412a7520 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 00000000000180fc RDI: ffffa141d01023c0 RBP: ffffa9bb412a76a0 R08: 0000000000001319 R09: 00000000ffffff92 R10: ffffffffc0292de3 R11: ffffffffc00d2f51 R12: 0000000000000000 R13: ffffa141d01023c0 R14: ffffffffc0290250 R15: ffffa141d0102638 FS: 00007fa99f5c2740(0000) GS:ffffa142e5e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000013e8e010 CR3: 0000000110d2c000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: rtw89_core_sta_add+0x95/0x9c [rtw89_core <HASH:d239 29>] rtw89_ops_sta_state+0x5d/0x108 [rtw89_core <HASH:d239 29>] drv_sta_state+0x115/0x66f [mac80211 <HASH:81fe 30>] sta_info_insert_rcu+0x45c/0x713 [mac80211 <HASH:81fe 30>] sta_info_insert+0xf/0x1b [mac80211 <HASH:81fe 30>] ieee80211_prep_connection+0x9d6/0xb0c [mac80211 <HASH:81fe 30>] ieee80211_mgd_auth+0x2aa/0x352 [mac80211 <HASH:81fe 30>] cfg80211_mlme_auth+0x160/0x1f6 [cfg80211 <HASH:00cd 31>] nl80211_authenticate+0x2e5/0x306 [cfg80211 <HASH:00cd 31>] genl_rcv_msg+0x371/0x3a1 ? nl80211_stop_sched_scan+0xe5/0xe5 [cfg80211 <HASH:00cd 31>] ? genl_rcv+0x36/0x36 netlink_rcv_skb+0x8a/0xf9 genl_rcv+0x28/0x36 netlink_unicast+0x27b/0x3a0 netlink_sendmsg+0x2aa/0x469 sock_sendmsg_nosec+0x49/0x4d ____sys_sendmsg+0xe5/0x213 __sys_sendmsg+0xec/0x157 ? syscall_enter_from_user_mode+0xd7/0x116 do_syscall_64+0x43/0x55 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa99f6e689b | |||||
| CVE-2025-38297 | 1 Linux | 1 Linux Kernel | 2025-11-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PM: EM: Fix potential division-by-zero error in em_compute_costs() When the device is of a non-CPU type, table[i].performance won't be initialized in the previous em_init_performance(), resulting in division by zero when calculating costs in em_compute_costs(). Since the 'cost' algorithm is only used for EAS energy efficiency calculations and is currently not utilized by other device drivers, we should add the _is_cpu_device(dev) check to prevent this division-by-zero issue. | |||||
| CVE-2022-50102 | 1 Linux | 1 Linux Kernel | 2025-11-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: video: fbdev: arkfb: Fix a divide-by-zero bug in ark_set_pixclock() Since the user can control the arguments of the ioctl() from the user space, under special arguments that may result in a divide-by-zero bug in: drivers/video/fbdev/arkfb.c:784: ark_set_pixclock(info, (hdiv * info->var.pixclock) / hmul); with hdiv=1, pixclock=1 and hmul=2 you end up with (1*1)/2 = (int) 0. and then in: drivers/video/fbdev/arkfb.c:504: rv = dac_set_freq(par->dac, 0, 1000000000 / pixclock); we'll get a division-by-zero. The following log can reveal it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:ark_set_pixclock drivers/video/fbdev/arkfb.c:504 [inline] RIP: 0010:arkfb_set_par+0x10fc/0x24c0 drivers/video/fbdev/arkfb.c:784 Call Trace: fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1034 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189 Fix this by checking the argument of ark_set_pixclock() first. | |||||
| CVE-2025-38519 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon: fix divide by zero in damon_get_intervals_score() The current implementation allows having zero size regions with no special reasons, but damon_get_intervals_score() gets crashed by divide by zero when the region size is zero. [ 29.403950] Oops: divide error: 0000 [#1] SMP NOPTI This patch fixes the bug, but does not disallow zero size regions to keep the backward compatibility since disallowing zero size regions might be a breaking change for some users. In addition, the same crash can happen when intervals_goal.access_bp is zero so this should be fixed in stable trees as well. | |||||