Total
400 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-38205 | 1 Linux | 1 Linux Kernel | 2025-11-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid divide by zero by initializing dummy pitch to 1 [Why] If the dummy values in `populate_dummy_dml_surface_cfg()` aren't updated then they can lead to a divide by zero in downstream callers like CalculateVMAndRowBytes() [How] Initialize dummy value to a value to avoid divide by zero. | |||||
| CVE-2025-37896 | 1 Linux | 1 Linux Kernel | 2025-11-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-mem: Add fix to avoid divide error For some SPI flash memory operations, dummy bytes are not mandatory. For example, in Winbond SPINAND flash memory devices, the `write_cache` and `update_cache` operation variants have zero dummy bytes. Calculating the duration for SPI memory operations with zero dummy bytes causes a divide error when `ncycles` is calculated in the spi_mem_calc_op_duration(). Add changes to skip the 'ncylcles' calculation for zero dummy bytes. Following divide error is fixed by this change: Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI ... ? do_trap+0xdb/0x100 ? do_error_trap+0x75/0xb0 ? spi_mem_calc_op_duration+0x56/0xb0 ? exc_divide_error+0x3b/0x70 ? spi_mem_calc_op_duration+0x56/0xb0 ? asm_exc_divide_error+0x1b/0x20 ? spi_mem_calc_op_duration+0x56/0xb0 ? spinand_select_op_variant+0xee/0x190 [spinand] spinand_match_and_init+0x13e/0x1a0 [spinand] spinand_manufacturer_match+0x6e/0xa0 [spinand] spinand_probe+0x357/0x7f0 [spinand] ? kernfs_activate+0x87/0xd0 spi_mem_probe+0x7a/0xb0 spi_probe+0x7d/0x130 | |||||
| CVE-2025-37850 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config() With CONFIG_COMPILE_TEST && !CONFIG_HAVE_CLK, pwm_mediatek_config() has a divide-by-zero in the following line: do_div(resolution, clk_get_rate(pc->clk_pwms[pwm->hwpwm])); due to the fact that the !CONFIG_HAVE_CLK version of clk_get_rate() returns zero. This is presumably just a theoretical problem: COMPILE_TEST overrides the dependency on RALINK which would select COMMON_CLK. Regardless it's a good idea to check for the error explicitly to avoid divide-by-zero. Fixes the following warning: drivers/pwm/pwm-mediatek.o: warning: objtool: .text: unexpected end of section [ukleinek: s/CONFIG_CLK/CONFIG_HAVE_CLK/] | |||||
| CVE-2022-49978 | 1 Linux | 1 Linux Kernel | 2025-11-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: fb_pm2fb: Avoid potential divide by zero error In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be copied from user, then go through `fb_set_var()` and `info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`. Along the path, `var->pixclock` won't be modified. This function checks whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is zero, there will be a divide by zero error. So, it is necessary to check whether denominator is zero to avoid crash. As this bug is found by Syzkaller, logs are listed below. divide error in pm2fb_check_var Call Trace: <TASK> fb_set_var+0x367/0xeb0 drivers/video/fbdev/core/fbmem.c:1015 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189 | |||||
| CVE-2022-50010 | 1 Linux | 1 Linux Kernel | 2025-11-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: video: fbdev: i740fb: Check the argument of i740_calc_vclk() Since the user can control the arguments of the ioctl() from the user space, under special arguments that may result in a divide-by-zero bug. If the user provides an improper 'pixclock' value that makes the argumet of i740_calc_vclk() less than 'I740_RFREQ_FIX', it will cause a divide-by-zero bug in: drivers/video/fbdev/i740fb.c:353 p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX))); The following log can reveal it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:i740_calc_vclk drivers/video/fbdev/i740fb.c:353 [inline] RIP: 0010:i740fb_decode_var drivers/video/fbdev/i740fb.c:646 [inline] RIP: 0010:i740fb_set_par+0x163f/0x3b70 drivers/video/fbdev/i740fb.c:742 Call Trace: fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1034 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189 Fix this by checking the argument of i740_calc_vclk() first. | |||||
| CVE-2025-37766 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-05 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2025-37767 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-05 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2025-37768 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-05 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2025-37769 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-05 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm/smu11: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. (cherry picked from commit da7dc714a8f8e1c9fc33c57cd63583779a3bef71) | |||||
| CVE-2025-37770 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-05 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2025-37771 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-05 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2021-46312 | 1 Djvulibre Project | 1 Djvulibre | 2025-11-04 | N/A | 6.5 MEDIUM |
| An issue was discovered IW44EncodeCodec.cpp in djvulibre 3.5.28 in allows attackers to cause a denial of service via divide by zero. | |||||
| CVE-2021-46310 | 1 Djvulibre Project | 1 Djvulibre | 2025-11-04 | N/A | 6.5 MEDIUM |
| An issue was discovered IW44Image.cpp in djvulibre 3.5.28 in allows attackers to cause a denial of service via divide by zero. | |||||
| CVE-2025-37740 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: jfs: add sanity check for agwidth in dbMount The width in dmapctl of the AG is zero, it trigger a divide error when calculating the control page level in dbAllocAG. To avoid this issue, add a check for agwidth in dbAllocAG. | |||||
| CVE-2024-50287 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-tpg: prevent the risk of a division by zero As reported by Coverity, the logic at tpg_precalculate_line() blindly rescales the buffer even when scaled_witdh is equal to zero. If this ever happens, this will cause a division by zero. Instead, add a WARN_ON_ONCE() to trigger such cases and return without doing any precalculation. | |||||
| CVE-2024-50233 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg() In the ad9832_write_frequency() function, clk_get_rate() might return 0. This can lead to a division by zero when calling ad9832_calc_freqreg(). The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect against the case when fout is 0. The ad9832_write_frequency() function is called from ad9832_write(), and fout is derived from a text buffer, which can contain any value. | |||||
| CVE-2024-50232 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr() In the ad7124_write_raw() function, parameter val can potentially be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST() is called within ad7124_set_channel_odr(). The ad7124_write_raw() function is invoked through the sequence: iio_write_channel_raw() -> iio_write_channel_attribute() -> iio_channel_write(), with no checks in place to ensure val is non-zero. | |||||
| CVE-2024-50205 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size() The step variable is initialized to zero. It is changed in the loop, but if it's not changed it will remain zero. Add a variable check before the division. The observed behavior was introduced by commit 826b5de90c0b ("ALSA: firewire-lib: fix insufficient PCM rule for period/buffer size"), and it is difficult to show that any of the interval parameters will satisfy the snd_interval_test() condition with data from the amdtp_rate_table[] table. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2024-49977 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Fix zero-division error when disabling tc cbs The commit b8c43360f6e4 ("net: stmmac: No need to calculate speed divider when offload is disabled") allows the "port_transmit_rate_kbps" to be set to a value of 0, which is then passed to the "div_s64" function when tc-cbs is disabled. This leads to a zero-division error. When tc-cbs is disabled, the idleslope, sendslope, and credit values the credit values are not required to be configured. Therefore, adding a return statement after setting the txQ mode to DCB when tc-cbs is disabled would prevent a zero-division error. | |||||
| CVE-2024-49892 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize get_bytes_per_element's default to 1 Variables, used as denominators and maybe not assigned to other values, should not be 0. bytes_per_element_y & bytes_per_element_c are initialized by get_bytes_per_element() which should never return 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. | |||||