Total
13689 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-6886 | 1 Libraw | 1 Libraw | 2026-06-17 | 7.5 HIGH | 9.8 CRITICAL |
| An error within the "parse_tiff_ifd()" function (internal/dcraw_common.cpp) in LibRaw versions before 0.18.2 can be exploited to corrupt memory. | |||||
| CVE-2017-6880 | 1 Cerberus | 1 Cerberus Ftp Server | 2026-06-17 | 7.5 HIGH | 9.8 CRITICAL |
| Buffer overflow in Cerberus FTP Server 8.0.10.3 allows remote attackers to cause a denial of service (daemon crash) or possibly have unspecified other impact via a long MLST command. | |||||
| CVE-2017-6852 | 1 Jasper Project | 1 Jasper | 2026-06-17 | 6.8 MEDIUM | 7.8 HIGH |
| Heap-based buffer overflow in the jpc_dec_decodepkt function in jpc_t2dec.c in JasPer 2.0.10 allows remote attackers to have unspecified impact via a crafted image. | |||||
| CVE-2017-6844 | 1 Podofo Project | 1 Podofo | 2026-06-17 | 6.8 MEDIUM | 7.8 HIGH |
| Buffer overflow in the PoDoFo::PdfParser::ReadXRefSubsection function in PdfParser.cpp in PoDoFo 0.9.4 allows remote attackers to have unspecified impact via a crafted file. | |||||
| CVE-2017-6843 | 1 Podofo Project | 1 Podofo | 2026-06-17 | 6.8 MEDIUM | 7.8 HIGH |
| Heap-based buffer overflow in the PoDoFo::PdfVariant::DelayedLoad function in PdfVariant.h in PoDoFo 0.9.4 allows remote attackers to have unspecified impact via a crafted file. | |||||
| CVE-2017-6836 | 2 Audiofile, Debian | 2 Audiofile, Debian Linux | 2026-06-17 | 4.3 MEDIUM | 5.5 MEDIUM |
| Heap-based buffer overflow in the Expand3To4Module::run function in libaudiofile/modules/SimpleModule.h in Audio File Library (aka audiofile) 0.3.6, 0.3.5, 0.3.4, 0.3.3, 0.3.2, 0.3.1, 0.3.0 allows remote attackers to cause a denial of service (crash) via a crafted file. | |||||
| CVE-2017-6834 | 2 Audiofile, Debian | 2 Audiofile, Debian Linux | 2026-06-17 | 4.3 MEDIUM | 5.5 MEDIUM |
| Heap-based buffer overflow in the ulaw2linear_buf function in G711.cpp in Audio File Library (aka audiofile) 0.3.6, 0.3.5, 0.3.4, 0.3.3, 0.3.2, 0.3.1, 0.3.0, 0.2.7 allows remote attackers to cause a denial of service (crash) via a crafted file. | |||||
| CVE-2017-6832 | 2 Audiofile, Debian | 2 Audiofile, Debian Linux | 2026-06-17 | 4.3 MEDIUM | 5.5 MEDIUM |
| Heap-based buffer overflow in the decodeBlock in MSADPCM.cpp in Audio File Library (aka audiofile) 0.3.6, 0.3.5, 0.3.4, 0.3.3, 0.3.2, 0.3.1, 0.3.0, 0.2.7 allows remote attackers to cause a denial of service (crash) via a crafted file. | |||||
| CVE-2017-6831 | 2 Audiofile, Debian | 2 Audiofile, Debian Linux | 2026-06-17 | 4.3 MEDIUM | 5.5 MEDIUM |
| Heap-based buffer overflow in the decodeBlockWAVE function in IMA.cpp in Audio File Library (aka audiofile) 0.3.6, 0.3.5, 0.3.4, 0.3.3, 0.3.2, 0.3.1, 0.3.0 and 0.2.7 allows remote attackers to cause a denial of service (crash) via a crafted file. | |||||
| CVE-2017-6830 | 1 Audiofile | 1 Audiofile | 2026-06-17 | 4.3 MEDIUM | 5.5 MEDIUM |
| Heap-based buffer overflow in the alaw2linear_buf function in G711.cpp in Audio File Library (aka audiofile) 0.3.6 allows remote attackers to cause a denial of service (crash) via a crafted file. | |||||
| CVE-2017-6828 | 1 Audiofile | 1 Audiofile | 2026-06-17 | 6.8 MEDIUM | 7.8 HIGH |
| Heap-based buffer overflow in the readValue function in FileHandle.cpp in audiofile (aka libaudiofile and Audio File Library) 0.3.6 allows remote attackers to have unspecified impact via a crafted WAV file. | |||||
| CVE-2017-6827 | 1 Audiofile | 1 Audiofile | 2026-06-17 | 6.8 MEDIUM | 7.8 HIGH |
| Heap-based buffer overflow in the MSADPCM::initializeCoefficients function in MSADPCM.cpp in audiofile (aka libaudiofile and Audio File Library) 0.3.6 allows remote attackers to have unspecified impact via a crafted audio file. | |||||
| CVE-2017-6753 | 1 Cisco | 20 Webex Event Center, Webex Meeting Center, Webex Meetings and 17 more | 2026-06-17 | 9.3 HIGH | 8.8 HIGH |
| A vulnerability in Cisco WebEx browser extensions for Google Chrome and Mozilla Firefox could allow an unauthenticated, remote attacker to execute arbitrary code with the privileges of the affected browser on an affected system. This vulnerability affects the browser extensions for Cisco WebEx Meetings Server, Cisco WebEx Centers (Meeting Center, Event Center, Training Center, and Support Center), and Cisco WebEx Meetings when they are running on Microsoft Windows. The vulnerability is due to a design defect in the extension. An attacker who can convince an affected user to visit an attacker-controlled web page or follow an attacker-supplied link with an affected browser could exploit the vulnerability. If successful, the attacker could execute arbitrary code with the privileges of the affected browser. The following versions of the Cisco WebEx browser extensions are affected: Versions prior to 1.0.12 of the Cisco WebEx extension on Google Chrome, Versions prior to 1.0.12 of the Cisco WebEx extension on Mozilla Firefox. Cisco Bug IDs: CSCvf15012 CSCvf15020 CSCvf15030 CSCvf15033 CSCvf15036 CSCvf15037. | |||||
| CVE-2017-6745 | 1 Cisco | 1 Videoscape Distribution Suite For Television | 2026-06-17 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the cache server within Cisco Videoscape Distribution Suite (VDS) for Television 3.2(5)ES1 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on a targeted appliance. The vulnerability is due to excessive mapped connections exhausting the allotted resources within the system. An attacker could exploit this vulnerability by sending large amounts of inbound traffic to a device with the intention of overloading certain resources. A successful exploit could cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc39260. | |||||
| CVE-2017-6744 | 1 Cisco | 1 Ios | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||
| CVE-2017-6743 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||
| CVE-2017-6742 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device. The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability. | |||||
| CVE-2017-6741 | 1 Cisco | 1 Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device. The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability. | |||||
| CVE-2017-6740 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||
| CVE-2017-6739 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device. The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability. | |||||