Total
13695 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-6744 | 1 Cisco | 1 Ios | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||
| CVE-2017-6743 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||
| CVE-2017-6742 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device. The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability. | |||||
| CVE-2017-6741 | 1 Cisco | 1 Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device. The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability. | |||||
| CVE-2017-6740 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||
| CVE-2017-6739 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device. The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability. | |||||
| CVE-2017-6738 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||
| CVE-2017-6737 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device. The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability. | |||||
| CVE-2017-6736 | 1 Cisco | 2 Ios, Ios Xe | 2026-06-17 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities. | |||||
| CVE-2017-6731 | 1 Cisco | 1 Ios Xr | 2026-06-17 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in Multicast Source Discovery Protocol (MSDP) ingress packet processing for Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the MSDP session to be unexpectedly reset, causing a short denial of service (DoS) condition. The MSDP session will restart within a few seconds. More Information: CSCvd94828. Known Affected Releases: 4.3.2.MCAST 6.0.2.BASE. Known Fixed Releases: 6.3.1.19i.MCAST 6.2.3.1i.MCAST 6.2.2.17i.MCAST 6.1.4.12i.MCAST. | |||||
| CVE-2017-6720 | 1 Cisco | 170 Esw2-350g-52, Esw2-350g-52 Firmware, Esw2-350g-52dc and 167 more | 2026-06-17 | 6.8 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Secure Shell (SSH) subsystem of Cisco Small Business Managed Switches software could allow an authenticated, remote attacker to cause a reload of the affected switch, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of SSH connections. An attacker could exploit this vulnerability by logging in to an affected switch via SSH and sending a malicious SSH message. This vulnerability affects the following Cisco products when SSH is enabled: Small Business 300 Series Managed Switches, Small Business 500 Series Stackable Managed Switches, 350 Series Managed Switches, 350X Series Stackable Managed Switches, 550X Series Stackable Managed Switches, ESW2 Series Advanced Switches. Cisco Bug IDs: CSCvb48377. | |||||
| CVE-2017-6669 | 1 Cisco | 1 Webex Advanced Recording Format Player | 2026-06-17 | 6.8 MEDIUM | 7.8 HIGH |
| Multiple buffer overflow vulnerabilities exist in the Cisco WebEx Network Recording Player for Advanced Recording Format (ARF) files. An attacker could exploit these vulnerabilities by providing a user with a malicious ARF file via email or URL and convincing the user to launch the file. Exploitation of these vulnerabilities could cause an affected player to crash and, in some cases, could allow arbitrary code execution on the system of a targeted user. The Cisco WebEx Network Recording Player is an application that is used to play back WebEx meeting recordings that have been recorded on the computer of an online meeting attendee. The player can be automatically installed when the user accesses a recording file that is hosted on a WebEx server. The following client builds are affected by this vulnerability: Cisco WebEx Business Suite (WBS29) client builds prior to T29.13.130, Cisco WebEx Business Suite (WBS30) client builds prior to T30.17, Cisco WebEx Business Suite (WBS31) client builds prior to T31.10. Cisco Bug IDs: CSCvc47758 CSCvc51227 CSCvc51242. | |||||
| CVE-2017-6655 | 1 Cisco | 5 Mds 9000 Nx-os, Nx-os, Nx-os For Nexus 5500 Platform Switches and 2 more | 2026-06-17 | 3.3 LOW | 6.5 MEDIUM |
| A vulnerability in the Fibre Channel over Ethernet (FCoE) protocol implementation in Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition when an FCoE-related process unexpectedly reloads. This vulnerability affects Cisco NX-OS Software on the following Cisco devices when they are configured for FCoE: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches. More Information: CSCvc91729. Known Affected Releases: 8.3(0)CV(0.833). Known Fixed Releases: 8.3(0)ISH(0.62) 8.3(0)CV(0.944) 8.1(1) 8.1(0.8)S0 7.3(2)D1(0.47). | |||||
| CVE-2017-6633 | 1 Cisco | 5 Ucs C220 M4 Rack Server, Ucs C240 M4 Rack Server, Ucs C3160 Rack Server and 2 more | 2026-06-17 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the TCP throttling process of Cisco UCS C-Series Rack Servers 3.0(0.234) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP SYN packets to a specific TCP listening port on an affected device. An exploit could allow the attacker to cause a specific TCP listening port to stop accepting new connections, resulting in a DoS condition. Cisco Bug IDs: CSCva65544. | |||||
| CVE-2017-6612 | 1 Cisco | 1 Asr 5000 Series Software | 2026-06-17 | 5.0 MEDIUM | 8.6 HIGH |
| A vulnerability in the gateway GPRS support node (GGSN) of Cisco ASR 5000 Series Aggregation Services Routers 17.3.9.62033 through 21.1.2 could allow an unauthenticated, remote attacker to redirect HTTP traffic sent to an affected device. More Information: CSCvc67927. | |||||
| CVE-2017-6596 | 1 Partclone Project | 1 Partclone | 2026-06-17 | 4.3 MEDIUM | 5.5 MEDIUM |
| partclone.chkimg in partclone 0.2.89 is prone to a heap-based buffer overflow vulnerability due to insufficient validation of the partclone image header. An attacker may be able to launch a 'Denial of Service attack' in the context of the user running the affected application. | |||||
| CVE-2017-6553 | 1 Quest | 1 Privilege Manager For Unix | 2026-06-17 | 10.0 HIGH | 9.8 CRITICAL |
| Buffer Overflow in Quest One Identity Privilege Manager for Unix before 6.0.0.061 allows remote attackers to obtain full access to the policy server via an ACT_ALERT_EVENT request that causes memory corruption in the pmmasterd daemon. | |||||
| CVE-2017-6548 | 1 Asus | 2 Rt-ac53, Rt-ac53 Firmware | 2026-06-17 | 10.0 HIGH | 9.8 CRITICAL |
| Buffer overflows in networkmap on ASUS RT-N56U, RT-N66U, RT-AC66U, RT-N66R, RT-AC66R, RT-AC68U, RT-AC68R, RT-N66W, RT-AC66W, RT-AC87R, RT-AC87U, RT-AC51U, RT-AC68P, RT-N11P, RT-N12+, RT-N12E B1, RT-AC3200, RT-AC53U, RT-AC1750, RT-AC1900P, RT-N300, and RT-AC750 routers with firmware before 3.0.0.4.380.7378; RT-AC68W routers with firmware before 3.0.0.4.380.7266; and RT-N600, RT-N12+ B1, RT-N11P B1, RT-N12VP B1, RT-N12E C1, RT-N300 B1, and RT-N12+ Pro routers with firmware before 3.0.0.4.380.9488; and Asuswrt-Merlin firmware before 380.65_2 allow remote attackers to execute arbitrary code on the router via a long host or port in crafted multicast messages. | |||||
| CVE-2017-6542 | 3 Opensuse, Opensuse Project, Putty | 3 Leap, Leap, Putty | 2026-06-17 | 7.5 HIGH | 9.8 CRITICAL |
| The ssh_agent_channel_data function in PuTTY before 0.68 allows remote attackers to have unspecified impact via a large length value in an agent protocol message and leveraging the ability to connect to the Unix-domain socket representing the forwarded agent connection, which trigger a buffer overflow. | |||||
| CVE-2017-6506 | 1 Azure Dex | 1 Data Expert Ultimate | 2026-06-17 | 7.5 HIGH | 9.8 CRITICAL |
| In Azure Data Expert Ultimate 2.2.16, the SMTP verification function suffers from a buffer overflow vulnerability, leading to remote code execution. The attack vector is a crafted SMTP daemon that sends a long 220 (aka "Service ready") string. | |||||