| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Insufficient validation of untrusted input in Feedback in Google Chrome prior to 147.0.7727.138 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Policy bypass in ServiceWorkers in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to bypass content security policy via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/xe: Reorganize the init to decouple migration from reset
Attempting to issue reset on VF devices that don't support migration
leads to the following:
BUG: unable to handle page fault for address: 00000000000011f8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 7443 Comm: xe_sriov_flr Tainted: G S U 7.0.0-rc1-lgci-xe-xe-4588-cec43d5c2696af219-nodebug+ #1 PREEMPT(lazy)
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
RIP: 0010:xe_sriov_vfio_wait_flr_done+0xc/0x80 [xe]
Code: ff c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 54 53 <83> bf f8 11 00 00 02 75 61 41 89 f4 85 f6 74 52 48 8b 47 08 48 89
RSP: 0018:ffffc9000f7c39b8 EFLAGS: 00010202
RAX: ffffffffa04d8660 RBX: ffff88813e3e4000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000f7c39c8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff888101a48800
R13: ffff88813e3e4150 R14: ffff888130d0d008 R15: ffff88813e3e40d0
FS: 00007877d3d0d940(0000) GS:ffff88890b6d3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000011f8 CR3: 000000015a762000 CR4: 0000000000f52ef0
PKRU: 55555554
Call Trace:
<TASK>
xe_vfio_pci_reset_done+0x49/0x120 [xe_vfio_pci]
pci_dev_restore+0x3b/0x80
pci_reset_function+0x109/0x140
reset_store+0x5c/0xb0
dev_attr_store+0x17/0x40
sysfs_kf_write+0x72/0x90
kernfs_fop_write_iter+0x161/0x1f0
vfs_write+0x261/0x440
ksys_write+0x69/0xf0
__x64_sys_write+0x19/0x30
x64_sys_call+0x259/0x26e0
do_syscall_64+0xcb/0x1500
? __fput+0x1a2/0x2d0
? fput_close_sync+0x3d/0xa0
? __x64_sys_close+0x3e/0x90
? x64_sys_call+0x1b7c/0x26e0
? do_syscall_64+0x109/0x1500
? __task_pid_nr_ns+0x68/0x100
? __do_sys_getpid+0x1d/0x30
? x64_sys_call+0x10b5/0x26e0
? do_syscall_64+0x109/0x1500
? putname+0x41/0x90
? do_faccessat+0x1e8/0x300
? __x64_sys_access+0x1c/0x30
? x64_sys_call+0x1822/0x26e0
? do_syscall_64+0x109/0x1500
? tick_program_event+0x43/0xa0
? hrtimer_interrupt+0x126/0x260
? irqentry_exit+0xb2/0x710
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7877d5f1c5a4
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d a5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
RSP: 002b:00007fff48e5f908 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007877d5f1c5a4
RDX: 0000000000000001 RSI: 00007877d621b0c9 RDI: 0000000000000009
RBP: 0000000000000001 R08: 00005fb49113b010 R09: 0000000000000007
R10: 0000000000000000 R11: 0000000000000202 R12: 00007877d621b0c9
R13: 0000000000000009 R14: 00007fff48e5fac0 R15: 00007fff48e5fac0
</TASK>
This is caused by the fact that some of the xe_vfio_pci_core_device
members needed for handling reset are only initialized as part of
migration init.
Fix the problem by reorganizing the code to decouple VF init from
migration init. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: avoid double-free in smb_direct_free_sendmsg after smb_direct_flush_send_list()
smb_direct_flush_send_list() already calls smb_direct_free_sendmsg(),
so we should not call it again after post_sendmsg()
moved it to the batch list. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix device leak on probe failure
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
This driver takes a reference to the USB device during probe but does
not to release it on all probe errors (e.g. when descriptor parsing
fails).
Drop the redundant device reference to fix the leak, reduce cargo
culting, make it easier to spot drivers where an extra reference is
needed, and reduce the risk of further memory leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix off-by-8 bounds check in check_wsl_eas()
The bounds check uses (u8 *)ea + nlen + 1 + vlen as the end of the EA
name and value, but ea_data sits at offset sizeof(struct
smb2_file_full_ea_info) = 8 from ea, not at offset 0. The strncmp()
later reads ea->ea_data[0..nlen-1] and the value bytes follow at
ea_data[nlen+1..nlen+vlen], so the actual end is ea->ea_data + nlen + 1
+ vlen. Isn't pointer math fun?
The earlier check (u8 *)ea > end - sizeof(*ea) only guarantees the
8-byte header is in bounds, but since the last EA is placed within 8
bytes of the end of the response, the name and value bytes are read past
the end of iov.
Fix this mess all up by using ea->ea_data as the base for the bounds
check.
An "untrusted" server can use this to leak up to 8 bytes of kernel heap
into the EA name comparison and influence which WSL xattr the data is
interpreted as. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Reject attempts to sync VMSA of an already-launched/encrypted vCPU
Reject synchronizing vCPU state to its associated VMSA if the vCPU has
already been launched, i.e. if the VMSA has already been encrypted. On a
host with SNP enabled, accessing guest-private memory generates an RMP #PF
and panics the host.
BUG: unable to handle page fault for address: ff1276cbfdf36000
#PF: supervisor write access in kernel mode
#PF: error_code(0x80000003) - RMP violation
PGD 5a31801067 P4D 5a31802067 PUD 40ccfb5063 PMD 40e5954063 PTE 80000040fdf36163
SEV-SNP: PFN 0x40fdf36, RMP entry: [0x6010fffffffff001 - 0x000000000000001f]
Oops: Oops: 0003 [#1] SMP NOPTI
CPU: 33 UID: 0 PID: 996180 Comm: qemu-system-x86 Tainted: G OE
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Dell Inc. PowerEdge R7625/0H1TJT, BIOS 1.5.8 07/21/2023
RIP: 0010:sev_es_sync_vmsa+0x54/0x4c0 [kvm_amd]
Call Trace:
<TASK>
snp_launch_update_vmsa+0x19d/0x290 [kvm_amd]
snp_launch_finish+0xb6/0x380 [kvm_amd]
sev_mem_enc_ioctl+0x14e/0x720 [kvm_amd]
kvm_arch_vm_ioctl+0x837/0xcf0 [kvm]
kvm_vm_ioctl+0x3fd/0xcc0 [kvm]
__x64_sys_ioctl+0xa3/0x100
x64_sys_call+0xfe0/0x2350
do_syscall_64+0x81/0x10f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7ffff673287d
</TASK>
Note, the KVM flaw has been present since commit ad73109ae7ec ("KVM: SVM:
Provide support to launch and run an SEV-ES guest"), but has only been
actively dangerous for the host since SNP support was added. With SEV-ES,
KVM would "just" clobber guest state, which is totally fine from a host
kernel perspective since userspace can clobber guest state any time before
sev_launch_update_vmsa(). |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Fix previous acpi_processor_errata_piix4() fix
After commi f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference
in acpi_processor_errata_piix4()"), device pointers may be dereferenced
after dropping references to the device objects pointed to by them,
which may cause a use-after-free to occur.
Moreover, debug messages about enabling the errata may be printed
if the errata flags corresponding to them are unset.
Address all of these issues by moving message printing to the points
in the code where the errata flags are set. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/syscalls: Add spectre boundary for syscall dispatch table
The s390 syscall number is directly controlled by userspace, but does
not have an array_index_nospec() boundary to prevent access past the
syscall function pointer tables. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: set fileio bio failed in short read case
For file-backed mount, IO requests are handled by vfs_iocb_iter_read().
However, it can be interrupted by SIGKILL, returning the number of
bytes actually copied. Unused folios in bio are unexpectedly marked
as uptodate.
vfs_read
filemap_read
filemap_get_pages
filemap_readahead
erofs_fileio_readahead
erofs_fileio_rq_submit
vfs_iocb_iter_read
filemap_read
filemap_get_pages <= detect signal
erofs_fileio_ki_complete <= set all folios uptodate
This patch addresses this by setting short read bio with an error
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix skb_put() panic on non-linear skb during reassembly
In iptfs_reassem_cont(), IP-TFS attempts to append data to the new inner
packet 'newskb' that is being reassembled. First a zero-copy approach is
tried if it succeeds then newskb becomes non-linear.
When a subsequent fragment in the same datagram does not meet the
fast-path conditions, a memory copy is performed. It calls skb_put() to
append the data and as newskb is non-linear it triggers
SKB_LINEAR_ASSERT check.
Oops: invalid opcode: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:skb_put+0x3c/0x40
[...]
Call Trace:
<IRQ>
iptfs_reassem_cont+0x1ab/0x5e0 [xfrm_iptfs]
iptfs_input_ordered+0x2af/0x380 [xfrm_iptfs]
iptfs_input+0x122/0x3e0 [xfrm_iptfs]
xfrm_input+0x91e/0x1a50
xfrm4_esp_rcv+0x3a/0x110
ip_protocol_deliver_rcu+0x1d7/0x1f0
ip_local_deliver_finish+0xbe/0x1e0
__netif_receive_skb_core.constprop.0+0xb56/0x1120
__netif_receive_skb_list_core+0x133/0x2b0
netif_receive_skb_list_internal+0x1ff/0x3f0
napi_complete_done+0x81/0x220
virtnet_poll+0x9d6/0x116e [virtio_net]
__napi_poll.constprop.0+0x2b/0x270
net_rx_action+0x162/0x360
handle_softirqs+0xdc/0x510
__irq_exit_rcu+0xe7/0x110
irq_exit_rcu+0xe/0x20
common_interrupt+0x85/0xa0
</IRQ>
<TASK>
Fix this by checking if the skb is non-linear. If it is, linearize it by
calling skb_linearize(). As the initial allocation of newskb originally
reserved enough tailroom for the entire reassembled packet we do not
need to check if we have enough tailroom or extend it. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: avoid memory leak in magicmouse_report_fixup()
The magicmouse_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Fix use-after-free and list corruption on sender error
The analysis from Breno:
When the SMI sender returns an error, smi_work() delivers an error
response but then jumps back to restart without cleaning up properly:
1. intf->curr_msg is not cleared, so no new message is pulled
2. newmsg still points to the message, causing sender() to be called
again with the same message
3. If sender() fails again, deliver_err_response() is called with
the same recv_msg that was already queued for delivery
This causes list_add corruption ("list_add double add") because the
recv_msg is added to the user_msgs list twice. Subsequently, the
corrupted list leads to use-after-free when the memory is freed and
reused, and eventually a NULL pointer dereference when accessing
recv_msg->done.
The buggy sequence:
sender() fails
-> deliver_err_response(recv_msg) // recv_msg queued for delivery
-> goto restart // curr_msg not cleared!
sender() fails again (same message!)
-> deliver_err_response(recv_msg) // tries to queue same recv_msg
-> LIST CORRUPTION
Fix this by freeing the message and setting it to NULL on a send error.
Also, always free the newmsg on a send error, otherwise it will leak. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Initialize free_qp completion before using it
In irdma_create_qp, if ib_copy_to_udata fails, it will call
irdma_destroy_qp to clean up which will attempt to wait on
the free_qp completion, which is not initialized yet. Fix this
by initializing the completion before the ib_copy_to_udata call. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: clamp SCO altsetting table indices
btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.
While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[]. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix circular locking dependency in nci_close_device
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and the transport is closed, so the work will see it and return
-ENETDOWN.
NIPA has been hitting this running the nci selftest with a debug
kernel on roughly 4% of the runs. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: validate inner IPv4 header length in IPTFS payload
Add validation of the inner IPv4 packet tot_len and ihl fields parsed
from decrypted IPTFS payloads in __input_process_payload(). A crafted
ESP packet containing an inner IPv4 header with tot_len=0 causes an
infinite loop: iplen=0 leads to capturelen=min(0, remaining)=0, so the
data offset never advances and the while(data < tail) loop never
terminates, spinning forever in softirq context.
Reject inner IPv4 packets where tot_len < ihl*4 or ihl*4 < sizeof(struct
iphdr), which catches both the tot_len=0 case and malformed ihl values.
The normal IP stack performs this validation in ip_rcv_core(), but IPTFS
extracts and processes inner packets before they reach that layer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nxp-nci: allow GPIOs to sleep
Allow the firmware and enable GPIOs to sleep.
This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.
-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 -- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create
We have recently observed a number of subvolumes with broken dentries.
ls-ing the parent dir looks like:
drwxrwxrwt 1 root root 16 Jan 23 16:49 .
drwxr-xr-x 1 root root 24 Jan 23 16:48 ..
d????????? ? ? ? ? ? broken_subvol
and similarly stat-ing the file fails.
In this state, deleting the subvol fails with ENOENT, but attempting to
create a new file or subvol over it errors out with EEXIST and even
aborts the fs. Which leaves us a bit stuck.
dmesg contains a single notable error message reading:
"could not do orphan cleanup -2"
2 is ENOENT and the error comes from the failure handling path of
btrfs_orphan_cleanup(), with the stack leading back up to
btrfs_lookup().
btrfs_lookup
btrfs_lookup_dentry
btrfs_orphan_cleanup // prints that message and returns -ENOENT
After some detailed inspection of the internal state, it became clear
that:
- there are no orphan items for the subvol
- the subvol is otherwise healthy looking, it is not half-deleted or
anything, there is no drop progress, etc.
- the subvol was created a while ago and does the meaningful first
btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much
later.
- after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT,
which results in a negative dentry for the subvolume via
d_splice_alias(NULL, dentry), leading to the observed behavior. The
bug can be mitigated by dropping the dentry cache, at which point we
can successfully delete the subvolume if we want.
i.e.,
btrfs_lookup()
btrfs_lookup_dentry()
if (!sb_rdonly(inode->vfs_inode)->vfs_inode)
btrfs_orphan_cleanup(sub_root)
test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
btrfs_search_slot() // finds orphan item for inode N
...
prints "could not do orphan cleanup -2"
if (inode == ERR_PTR(-ENOENT))
inode = NULL;
return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume
btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
on the root when it runs, so it cannot run more than once on a given
root, so something else must run concurrently. However, the obvious
routes to deleting an orphan when nlinks goes to 0 should not be able to
run without first doing a lookup into the subvolume, which should run
btrfs_orphan_cleanup() and set the bit.
The final important observation is that create_subvol() calls
d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if
the dentry cache gets dropped, the next lookup into the subvolume will
make a real call into btrfs_orphan_cleanup() for the first time. This
opens up the possibility of concurrently deleting the inode/orphan items
but most typical evict() paths will be holding a reference on the parent
dentry (child dentry holds parent->d_lockref.count via dget in
d_alloc(), released in __dentry_kill()) and prevent the parent from
being removed from the dentry cache.
The one exception is delayed iputs. Ordered extent creation calls
igrab() on the inode. If the file is unlinked and closed while those
refs are held, iput() in __dentry_kill() decrements i_count but does
not trigger eviction (i_count > 0). The child dentry is freed and the
subvol dentry's d_lockref.count drops to 0, making it evictable while
the inode is still alive.
Since there are two races (the race between writeback and unlink and
the race between lookup and delayed iputs), and there are too many moving
parts, the following three diagrams show the complete picture.
(Only the second and third are races)
Phase 1:
Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set
btrfs_mksubvol()
lookup_one_len()
__lookup_slow()
d_alloc_parallel()
__d_alloc() // d_lockref.count = 1
create_subvol(dentry)
// doesn't touch the bit..
d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c
---truncated--- |
