| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Mongoose is an embedded web server and network library. Prior to 7.23, the built-in TCP/IP stack enabled by MG_ENABLE_TCPIP in src/net_builtin.c does not reject a TCP option whose declared opts[1] length exceeds the remaining option bytes. In handle_opt(), a NOP followed by a truncated MSS option causes opts[3] to be read outside the declared options area and used as the low byte of dmss. An unauthenticated remote peer can corrupt the per-connection MSS value so later mg_send() calls transmit truncated or zero-length application payloads while the TCP connection otherwise appears healthy. This issue is fixed in version 7.23. |
| Server-Side Request Forgery (SSRF) vulnerability in Apache Camel A2A component.
This issue affects Apache Camel: from 4.21.0 before 4.22.2.
WebhookUrlValidator classified a push notification webhook host in two places that did not agree. A host written as an IP literal was matched against a list of string prefixes that named the IPv6 unique local range fc00::/7, while a host reached through a name was resolved and the resulting address classified with the InetAddress predicates isLoopbackAddress, isAnyLocalAddress, isLinkLocalAddress and isSiteLocalAddress. Those predicates do not cover the same ground as the prefix list: isSiteLocalAddress reports the deprecated fec0::/10 block and not the fc00::/7 unique local addresses that replaced it, and the JDK carries no predicate for them at all. The same address was therefore accepted or rejected depending on how it was written, and a webhook URL whose host name resolved into fc00::/7 passed a guard that refused the identical address given as a literal. PushNotificationDispatcher then sent the push notification to that address, together with any Authorization header carried in the same configuration, whose scheme and credentials the registering caller supplies. The webhook URL arrives as TaskPushNotificationConfig.url from the caller registering the push notification, so it is attacker-controlled, and allowLocalWebhookUrls is false by default, which is the configuration in which the guard is expected to hold. The response is not relayed back to the caller who registered the configuration, so what the gap yields is a blind outbound HTTPS request from the Camel process to an internal address the guard was written to refuse; reaching a service that way additionally requires that the name resolve into fc00::/7 in the target environment, that an HTTPS service be listening on that address, and that the TLS handshake succeed for the name being requested, which is why the severity is assessed medium. The same string pre-check was also wrong in the other direction: it matched the raw host string without first establishing that the host was an IP literal, so any name merely beginning with fc or fd, such as fcm.googleapis.com, was refused outright.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. The 4.21.x release line reached end of life before this issue was resolved and will not receive a fix, so deployments on it must move to a supported release. Both the literal and the resolved path now classify the address from its raw bytes with one shared classifier, which recognises fc00::/7 and the shared address space 100.64.0.0/10, as well as IPv4-compatible, NAT64 (64:ff9b::/96) and 6to4 (2002::/16) addresses whose embedded IPv4 address is not globally routable. For deployments that cannot upgrade immediately, place authentication in front of the A2A push notification configuration path so that the webhook URL does not arrive from an untrusted caller, and deny egress from the Camel process to fc00::/7 at the network level; where the deployment has no need of IPv6, starting the JVM with -Djava.net.preferIPv4Stack=true removes the address class the gap turns on. Note that allowLocalWebhookUrls=false is already the default and does not by itself close the gap. |
| An authorization issue was addressed with improved state management. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2. An app may be able to access sensitive user data. |
| Lychee is a free, open-source photo-management tool. Prior to 7.6.1, POST /api/v2/Album::unlock has no throttle, attempt counter, backoff, CAPTCHA, or lockout. UnlockAlbumRequest::authorize() permits any caller to submit attempts, and app/Actions/Album/Unlock.php verifies each guess with Hash::check without limiting repeated failures. A remote unauthenticated attacker who knows or can obtain an album identifier can automate password guesses against a password-protected album and, if the password is recovered, gain access to its private photo collection. This issue is fixed in version 7.6.1. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Portal). Supported versions that are affected are 8.61 and 8.62. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 4.2 (Confidentiality and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:L/I:N/A:L). |
| Cross-Site Request Forgery (CSRF) vulnerability in SABBATIC application that allows an attacker can trick an authenticated user into clicking a malicious link or loading a page that sends unauthorized requests to a vulnerable endpoint. |
| Stored Cross-Site Scripting (XSS) vulnerability in SABBATIC application that allows an attacker to store JavaScript code so that when a user views the page, code can be executed in the victim's browser. The list of assigned parameters and identifiers is as follows:
parameter 'observaciones' in /mis-gastos endpoint. |
| Stored Cross-Site Scripting (XSS) vulnerability in SABBATIC application that allows an attacker to store JavaScript code so that when a user views the page, code can be executed in the victim's browser. The list of assigned parameters and identifiers is as follows:
parameter 'companyName' in /empresa endpoint; |
| Stored Cross-Site Scripting (XSS) vulnerability in SABBATIC application that allows an attacker to store JavaScript code so that when a user views the page, code can be executed in the victim's browser. The list of assigned parameters and identifiers is as follows:
parameters 'titulo_es' and 'add_etiquetas%5B%5D' in '/categorías' endpoint; |
| Stored Cross-Site Scripting (XSS) vulnerability in SABBATIC application that allows an attacker to store JavaScript code so that when a user views the page, code can be executed in the victim's browser. The list of assigned parameters and identifiers is as follows:
parameter 'nombre' in '/usuario' endpoint; |
| Heimdall is a cloud native Identity Aware Proxy and Access Control Decision service. Prior to version 0.17.17, when Heimdall operates in proxy mode, it constructs the Forwarded HTTP header after executing the matched rule pipeline by inserting the incoming request's Host header value directly into the header string without sanitizing commas or semicolons. This allows an attacker to inject additional parameters into the Forwarded header, potentially spoofing IP addresses for upstream services. This issue has been patched in version 0.17.17. |
| PraisonAI is a multi-agent teams system. From version 4.5.87 to before version 4.6.61, PraisonAI recipe execution has a dangerous-tool policy that is supposed to block default-denied tools unless the caller explicitly passes allow_dangerous_tools=True. That policy only checks tools declared in TEMPLATE.yaml requires.tools. For steps-based recipes, the actual execution path loads workflow.yaml with YAMLWorkflowParser. That parser resolves agent-level tools: declarations and preserves top-level approve:. Workflow.start() then installs those YAML-approved tools into the approval context. As a result, an untrusted recipe can omit execute_command from TEMPLATE.yaml requires.tools, declare it in workflow.yaml agents.*.tools, and add top-level approve: [execute_command]. The caller did not set allow_dangerous_tools=True, but the recipe policy allows the recipe and the workflow approval path self-approves the critical shell tool. This issue has been patched in version 4.6.61. |
| PraisonAI is a multi-agent teams system. From version 4.5.126 to before version 4.6.59, PraisonAI's Async Jobs API validates webhook_url when a job request is parsed and again when the internal Job object is constructed. That validation blocks direct loopback/private targets, but it is not bound to the later network request. When a job completes, _send_webhook() passes the original hostname to httpx.AsyncClient.post() with no send-time validation, IP pinning, or guarded transport. An attacker-controlled hostname can therefore resolve to a public IP during Pydantic validation and later resolve to loopback/private/cloud-metadata infrastructure during webhook delivery. This bypasses the intended SSRF guard in current supported releases. This appears to be an incomplete fix / patch bypass for GHSA-8frj-8q3m-xhgm. This issue has been patched in version 4.6.59. |
| PraisonAI is a multi-agent teams system. From version 4.5.87 to before version 4.6.59, PraisonAI recipe execution blocks default-denied dangerous tools unless the caller explicitly passes allow_dangerous_tools=True. The normal recipe.run() path enforces this with _check_tool_policy(). The streaming path, recipe.run_stream(), loads the same recipe, checks dependencies, and then calls _execute_recipe() without running the dangerous-tool policy check. As a result, a recipe that honestly declares execute_command in TEMPLATE.yaml requires.tools is denied by recipe.run(), but reaches the execution engine through recipe.run_stream() with allow_dangerous_tools=False. This issue has been patched in version 4.6.59. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Mamunur Rashid The Post Grid the-post-grid allows Stored XSS.This issue affects The Post Grid: from n/a through 7.9.7. |
| The GTM Server Side plugin by stape.io implements server-side tracking on WordPress websites. From version 2.0.0 to before version 2.1.48, the WooCommerce purchase event tracking mechanism allows an unauthenticated attacker to trigger the rendering of another customer's full order data — including personally identifiable information (PII) — into the page's JavaScript dataLayer. This issue has been patched in version 2.1.48. |
| Flyto2 Core is an execution kernel for automation and AI-agent workflows. From 2.26.2 until 2.26.4, the HTTP MCP POST /mcp route accepts unauthenticated JSON-RPC tools/call requests and forwards execute_module arguments to the module registry without the require_auth dependency used by the REST execution routes. An unauthenticated caller can select sandbox.execute_shell and supply its command parameter, which reaches asyncio.create_subprocess_shell with the privileges of the flyto-core server process. The endpoint is reachable locally under the default loopback binding and becomes network reachable when an operator binds the server to a non-loopback interface, allowing arbitrary OS command execution and potential full host compromise. This issue is fixed in version 2.26.4. |
| e107 is a content management system (CMS). Prior to 2.3.7, the bundled alt_auth plugin's otherdb and e107db authentication backends interpolate the submitted login username directly into SQL in e107_plugins/alt_auth/otherdb_auth.php and e107_plugins/alt_auth/e107db_auth.php. The login() methods execute those strings with PDO::query() before effective sanitization, so an unauthenticated user can inject SQL when alt_auth is installed and either backend is configured with a live external database connection. The injection can expose or modify data available to the configured database account, and query failures can additionally disclose the generated query through the debug-message path. This issue is fixed in version 2.3.7. |
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 23.03 to before version 26.05, SolrTools.cleanUpQuery() strips Solr local-parameter syntax ({!...}) from user-supplied query strings before they reach Solr. Its regex can be bypassed by wrapping the local parameter in a second pair of curly braces ({{!...}}): the outer braces are stripped, the inner {!...} survives intact, and a valid Solr local parameter is forwarded. The flaw is in the shared sanitizer, so it affects any endpoint that routes user input through cleanUpQuery. The double-brace bypass applies from v23.10 (the greedy \{(.+)\} regex); a related bare-!join rewrap path is present. This issue has been patched in version 26.05. |
| Event Schedule is an open-source platform to share events, sell tickets and bring communities together. In versions 1.0.0 and prior, App\Utils\UrlUtils::isUrlSafe() is the SSRF guard applied to user-supplied import URLs. It can be bypassed two ways, both reaching internal/localhost services when the URL is later fetched by ImportCuratorEvents (Http::get($url) then the response body is parsed and imported as events, and file_get_contents($ogImage)). At time of publication, there are no publicly available patches. |
