Total
18730 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53130 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fs/omfs: reject s_sys_blocksize smaller than OMFS_DIR_START omfs_fill_super() rejects oversized s_sys_blocksize values (> PAGE_SIZE), but it does not reject values smaller than OMFS_DIR_START (0x1b8 = 440). Later, omfs_make_empty() uses sbi->s_sys_blocksize - OMFS_DIR_START as the length argument to memset(). Since s_sys_blocksize is u32, a crafted filesystem image with s_sys_blocksize < OMFS_DIR_START causes an unsigned underflow there, wrapping to a value near 2^32. That drives a ~4 GiB memset() from bh->b_data + OMFS_DIR_START and overwrites kernel memory far beyond the backing block buffer. Add the corresponding lower-bound check alongside the existing upper-bound check in omfs_fill_super(), so that malformed images are rejected during superblock validation before any filesystem data is processed. | |||||
| CVE-2026-53131 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 9.4 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: require Ethernet MAC header before using eth_hdr() `ip6t_eui64`, `xt_mac`, the `bitmap:ip,mac`, `hash:ip,mac`, and `hash:mac` ipset types, and `nf_log_syslog` access `eth_hdr(skb)` after either assuming that the skb is associated with an Ethernet device or checking only that the `ETH_HLEN` bytes at `skb_mac_header(skb)` lie between `skb->head` and `skb->data`. Make these paths first verify that the skb is associated with an Ethernet device, that the MAC header was set, and that it spans at least a full Ethernet header before accessing `eth_hdr(skb)`. | |||||
| CVE-2026-53132 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix potential unbounded skb queue virtio_transport_inc_rx_pkt() checks vvs->rx_bytes + len > vvs->buf_alloc. virtio_transport_recv_enqueue() skips coalescing for packets with VIRTIO_VSOCK_SEQ_EOM. If fed with packets with len == 0 and VIRTIO_VSOCK_SEQ_EOM, a very large number of packets can be queued because vvs->rx_bytes stays at 0. Fix this by estimating the skb metadata size: (Number of skbs in the queue) * SKB_TRUESIZE(0) | |||||
| CVE-2026-53139 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Skip CSD when it has zeroed workgroups A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2 registers. Kicking off a dispatch with a zero count in any of the three dimensions is invalid. First, the hardware will process 0 as 65536, while the user-space driver exposes a maximum of 65535. Over that, a submission with a zeroed workgroup dimension should be a no-op. These zeroed counts can reach the dispatch path through an indirect CSD job, whose workgroup counts are only known once the indirect buffer is read and may legitimately be zero, but such scenario should only result in a no-op. Overwrite the indirect CSD job workgroup counts with the indirect BO ones, even if they are zeroed, and don't submit the job to the hardware when any of the workgroup counts is zero, so the job completes immediately instead of running the shader. | |||||
| CVE-2026-53140 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix vaddr leak when indirect CSD has zeroed workgroups v3d_rewrite_csd_job_wg_counts_from_indirect() maps both the indirect buffer and the workgroup buffer and is expected to release them before returning. When any of the workgroup counts read from the buffer is zero, the function bailed out early and skipped the cleanup, leaking the vaddr mappings of both BOs. Jump to the cleanup path instead of returning directly, so the mappings are always dropped. | |||||
| CVE-2026-53146 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Limit XDomain response copy to actual frame size tb_xdomain_copy() copies req->response_size bytes from the received packet buffer regardless of the actual frame size. When a short response arrives, this reads past the valid frame data in the DMA pool buffer into stale contents from previous transactions. Use the minimum of frame size and expected response size for the copy length. | |||||
| CVE-2026-53147 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 8.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Validate XDomain request packet size before type cast tb_xdp_handle_request() casts the received packet buffer to protocol-specific structs without verifying that the allocation is large enough for the target type. A peer can send a minimal XDomain packet that passes the generic header length check but is shorter than the struct accessed after the cast, causing out-of- bounds reads from the kmemdup allocation. Plumb the packet length through xdomain_request_work and validate it against the expected struct size before each cast. | |||||
| CVE-2026-24264 | 2 Linux, Nvidia | 2 Linux Kernel, Triton Inference Server | 2026-07-06 | N/A | 7.5 HIGH |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker can cause improper handling of highly compressed data. A successful exploit of this vulnerability might lead to denial of service. | |||||
| CVE-2026-24266 | 2 Linux, Nvidia | 2 Linux Kernel, Triton Inference Server | 2026-07-06 | N/A | 5.9 MEDIUM |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker can cause a use-after-free issue. A successful exploit of this vulnerability might lead to denial of service. | |||||
| CVE-2026-53174 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ovl: keep err zero after successful ovl_cache_get() ovl_iterate_merged() stores PTR_ERR(cache) in err before checking IS_ERR(cache). On success err holds the truncated cache pointer and can be returned as a bogus non-zero error. The syzbot reproducer reaches this through overlay-on-overlay readdir: getdents64 iterate_dir(outer overlay file) ovl_iterate_merged() ovl_cache_get() ovl_dir_read_merged() ovl_dir_read() iterate_dir(inner overlay file) ovl_iterate_merged() Only compute PTR_ERR(cache) on the error path. | |||||
| CVE-2026-53178 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 8.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction Add guards to ensure ie_length is large enough before subtracting fixed IE offsets to prevent unsigned integer underflow. | |||||
| CVE-2026-53180 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: timers/migration: Fix livelock in tmigr_handle_remote_up() tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu == smp_processor_id(), assuming the local softirq path already handled this CPU's timers. This assumption is wrong because jiffies can advance after the handling of the CPU's global timers in run_timer_base(BASE_GLOBAL) and before tmigr_handle_remote() evaluates the expiry times. As a consequence a timer which expires after the CPU local timer wheel advanced and becomes expired in the remote handling is ignored and the callback is never invoked and removed from the timer wheel. What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it as expired, and the event is re-queued with expires == now on each iteration. The goto-again loop spins indefinitely. Fix this by calling timer_expire_remote() unconditionally. That's minimal overhead for the common case as __run_timer_base() returns immediately if there is nothing to expire in the local wheel. [ tglx: Amend change log and add a comment ] | |||||
| CVE-2026-53181 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: fix sk_ack_backlog leak on failed handshake When vmci_transport_recv_connecting_server() returns an error, vmci_transport_recv_listen() calls vsock_remove_pending() but never calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented permanently. Repeated handshake failures (malformed packets, queue pair alloc failure, event subscribe failure) cause sk_ack_backlog to climb toward sk_max_ack_backlog. Once it reaches the limit the listener permanently refuses all new connections with -ECONNREFUSED, a silent denial of service requiring a process restart to recover. The two existing sk_acceptq_removed() calls in af_vsock.c do not cover this path: line 764 checks vsock_is_pending() which returns false after vsock_remove_pending(), and line 1889 is only reached on successful accept(). Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on the error path. | |||||
| CVE-2026-53182 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject oversized EMA RNR lists nl80211_parse_rnr_elems() stores the parsed element count in a u8-backed cfg80211_rnr_elems::cnt field and uses that count to size the flexible array allocation. Reject nested NL80211_ATTR_EMA_RNR_ELEMS input once the count reaches 255, before incrementing it again. This keeps the parser aligned with the data structure it fills and matches the existing bound check used by nl80211_parse_mbssid_elems(). | |||||
| CVE-2026-53183 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: allow subflow rcv wnd to shrink In MPTCP connection, the `window` field in the TCP header refers to the MPTCP-level rcv_nxt and it's right edge should not move backward. Such constraint is enforced at DSS option generation time. At the same time, the TCP stack ensures independently that the TCP-level rcv wnd right's edge does not move backward. That in turn causes artificial inflating of the MPTCP rcv window when the incoming data is acked at the TCP level and is OoO in the MPTCP sequence space (or lands in the backlog). As a consequence, the incoming traffic can exceed the receiver rcvbuf size even when the sender is not misbehaving. Prevent such scenario forcibly allowing the TCP subflow to shrink the TCP-level rcv wnd regardless of the current netns setting. | |||||
| CVE-2026-53184 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: udp: clear skb->dev before running a sockmap verdict On the UDP receive path skb->dev is repurposed as dev_scratch (the truesize/state cache set by udp_set_dev_scratch()), through the union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff. When a UDP socket is in a sockmap, sk_data_ready is sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor() (sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq. If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp, bpf_skc_lookup_tcp), bpf_skc_lookup() does: if (skb->dev) caller_net = dev_net(skb->dev); skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net() dereferences it as a struct net_device * and the kernel takes a general protection fault on a non-canonical address in softirq: Oops: general protection fault, probably for non-canonical address 0x1010000800004a0 CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full) RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline] RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047 Call Trace: <IRQ> bpf_prog_4675cb904b7071f8+0x12e/0x14e bpf_prog_run_pin_on_cpu+0xc6/0x1f0 sk_psock_verdict_recv+0x1ba/0x350 udp_read_skb+0x31a/0x370 sk_psock_verdict_data_ready+0x2e3/0x600 __udp_enqueue_schedule_skb+0x4c8/0x650 udpv6_queue_rcv_one_skb+0x3ec/0x740 udp6_unicast_rcv_skb+0x11d/0x140 ip6_protocol_deliver_rcu+0x61e/0x950 ip6_input_finish+0xa9/0x150 NF_HOOK+0x286/0x2f0 ip6_input+0x117/0x220 NF_HOOK+0x286/0x2f0 __netif_receive_skb+0x85/0x200 process_backlog+0x374/0x9a0 __napi_poll+0x4f/0x1c0 net_rx_action+0x3b0/0x770 handle_softirqs+0x15a/0x460 do_softirq+0x57/0x80 </IRQ> The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which skb_set_owner_sk_safe() set just above. | |||||
| CVE-2026-53186 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 9.1 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: bound SRP_RSP sense copy by the received length srp_process_rsp() copies sense data from rsp->data + resp_data_len, where resp_data_len is the full 32-bit value supplied by the SRP target and is never checked against the number of bytes actually received (wc->byte_len). The copy length is bounded to SCSI_SENSE_BUFFERSIZE, so at most 96 bytes are copied, but the source offset is not bounded. A malicious or compromised SRP target on the InfiniBand/RoCE fabric that the initiator has logged into can return an SRP_RSP with SRP_RSP_FLAG_SNSVALID set and a large resp_data_len. The receive buffer is allocated at the target-chosen max_ti_iu_len, so the source of the sense copy lands past the bytes actually received; with resp_data_len near 0xFFFFFFFF it is gigabytes past the buffer and the read faults. Copy the sense data only if it has not been truncated, that is, only if the response header, the response data, and the sense region fit within the bytes actually received; otherwise drop the sense and log. The in-tree iSER and NVMe-RDMA receive paths already bound their parse by wc->byte_len; this brings ib_srp into line with them. | |||||
| CVE-2026-53187 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc The cpu_id attribute supplied by user space through UVERBS_ATTR_ALLOC_DMAH_CPU_ID is passed directly to cpumask_test_cpu() without first verifying that the value is within the valid CPU range. Passing such untrusted data to cpumask_test_cpu() may lead to an out-of-bounds read of the underlying cpumask bitmap: the helper expands to a test_bit() that indexes the bitmap by cpu_id / BITS_PER_LONG with no bound check. In addition, on kernels built with CONFIG_DEBUG_PER_CPU_MAPS it trips the WARN_ON_ONCE() in cpumask_check(); combined with panic_on_warn this turns a bad user input into a machine reboot. Reject any cpu_id that is not smaller than nr_cpu_ids with -EINVAL before it is used. Reported by Smatch. | |||||
| CVE-2026-53188 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Validate the passed in fops for ib_get_ucaps() Sashiko pointed out it is not safe to rely only on the devt because char/block alias so if the user finds a block device with the same dev_t it can masquerade as a ucap cdev fd. Test the f_ops to only accept authentic cdevs. | |||||
| CVE-2026-53189 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: update file PMD counter before folio_put() __split_huge_pmd_locked() updates the file/shmem RSS counter after dropping the PMD mapping's folio reference. If folio_put() drops the last reference, mm_counter_file() can later read freed folio state via folio_test_swapbacked(). Move the counter update before folio_put(). | |||||