Total
18730 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53323 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: remove redundant netdev_lock_ops() from conduit ethtool ops DSA replaces the conduit (master) device's ethtool_ops with its own wrappers that aggregate stats from both the conduit and DSA switch ports. Taking the lock again inside the DSA wrappers causes a deadlock. Stumbled upon this when booting qemu with fbnic and CONFIG_NET_DSA_LOOP=y (which looks like some kind of testing device that auto-populates the ports of eth0). `ethtool -i` is enough to deadlock. This means we have basically zero coverage for DSA stuff with real ops locked devs. Remove the redundant netdev_lock_ops()/netdev_unlock_ops() calls from the DSA conduit ethtool wrappers. | |||||
| CVE-2026-53324 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Use pci_name() for debugfs directory naming Use pci_name(pdev) for the per-device debugfs directory instead of hardcoded "0" for PFs and pci_slot_name(pdev->slot) for VFs. The previous approach had two issues: 1. pci_slot_name() dereferences pdev->slot, which can be NULL for VFs in environments like generic VFIO passthrough or nested KVM, causing a NULL pointer dereference. 2. Multiple PFs would all use "0", and VFs across different PCI domains or buses could share the same slot name, leading to -EEXIST errors from debugfs_create_dir(). pci_name(pdev) returns the unique BDF address, is always valid, and is unique across the system. | |||||
| CVE-2026-53325 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: agp/amd64: Fix broken error propagation in agp_amd64_probe() A NULL pointer dereference was observed in the AMD64 AGP driver when running in a virtualized environment (e.g. qemu/kvm) without a physical AMD northbridge. The crash occurs in amd64_fetch_size() when attempting to dereference the pointer returned by node_to_amd_nb(0). The root cause of this crash is broken error propagation in agp_amd64_probe(): When no AMD northbridges are found, cache_nbs() correctly returns -ENODEV. However, the probe function erroneously checks the return value against exactly -1, rather than < 0. As a result, the hardware absence error is masked, allowing the driver to improperly proceed with initialization. It eventually calls agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware does not exist, node_to_amd_nb(0) returns NULL, leading to a General Protection Fault (GPF) when accessing its ->misc member. Fix the issue by correcting the error check in agp_amd64_probe() to abort properly when cache_nbs() returns any negative error code. This prevents the driver from erroneously proceeding without hardware, thereby avoiding the subsequent NULL pointer dereference at its source. | |||||
| CVE-2026-53169 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: reject NPU_OP_RESIZE commands from userspace NPU_OP_RESIZE is a U85-only command that the driver does not yet implement. The existing WARN_ON(1) placeholder fires unconditionally whenever userspace submits this command via DRM_IOCTL_ETHOSU_GEM_CREATE, causing unbounded kernel log spam. If panic_on_warn is set the kernel panics, giving any unprivileged user with access to the DRM device a trivial denial-of-service primitive. Replace the WARN_ON(1) with an explicit -EINVAL return so the ioctl rejects the command before it reaches hardware. | |||||
| CVE-2026-53170 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: reject DMA commands with uninitialized length cmd_state_init() initializes the command state with memset(0xff), leaving dma->len at U64_MAX to signal missing setup. The only setter is NPU_SET_DMA0_LEN; if userspace omits this command and issues NPU_OP_DMA_START, dma->len remains U64_MAX. In dma_length(), a positive stride added to U64_MAX wraps to a small value. With size0 == 1, check_mul_overflow() does not trigger and dma_length() returns 0 instead of U64_MAX. The caller's U64_MAX check then passes, region_size[] stays 0, and the bounds check in ethosu_job.c is bypassed, allowing hardware to execute DMA with stale physical addresses. Fix by checking for U64_MAX at the start of dma_length() before any arithmetic, consistent with the sentinel value used throughout the driver to detect uninitialized fields. | |||||
| CVE-2026-53171 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix arithmetic issues in dma_length() dma_length() derives DMA region usage from command stream values and updates region_size[]: len = ((len + stride[0]) * size0 + stride[1]) * size1 region_size[region] = max(..., len + dma->offset) Several arithmetic issues can corrupt the derived region size: - signed stride values may underflow when added to len - intermediate multiplications may overflow - len + dma->offset may overflow during region_size updates - dma_length() error returns were not validated by the caller region_size[] is later used by ethosu_job.c to validate command stream accesses against GEM buffer sizes. Arithmetic wraparound can therefore under-report region usage and bypass the bounds validation. Fix by validating signed additions, using overflow helpers for multiplications and offset updates, and propagating dma_length() failures to the caller. | |||||
| CVE-2026-53172 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix IFM region index out-of-bounds in command stream parser NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving a maximum value of 127. However region_size[] and output_region[] in struct ethosu_validated_cmdstream_info are both sized to NPU_BASEP_REGION_MAX (8), giving valid indices [0..7]. Every other region assignment in the same switch uses param & 0x7: NPU_SET_OFM_REGION: st.ofm.region = param & 0x7; NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7; NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7; NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7; The 0x7f mask on IFM is inconsistent and appears to be a typo. feat_matrix_length() and calc_sizes() use the region index directly as an array subscript into the kzalloc'd info struct: info->region_size[fm->region] = max(...); A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes a write up to 127*8 = 1016 bytes past the start of region_size[], corrupting adjacent kernel heap data. Fix by applying the same & 0x7 mask used by all other region assignments. | |||||
| CVE-2026-53173 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate() The command stream parsing loop increments the index variable a second time when a 64-bit command word is encountered (bit 14 set), but does not re-check the loop bound before writing the second word: for (i = 0; i < size / 4; i++) { bocmds[i] = cmds[0]; if (cmd & 0x4000) { i++; bocmds[i] = cmds[1]; /* unchecked */ } } The buffer bocmds is backed by a DMA allocation of exactly size bytes from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1]. When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is set, bocmds[size/4-1] is written in bounds, i is then incremented to size/4, and bocmds[size/4] writes four bytes past the end of the allocation. Userspace controls both the buffer contents and the size argument via the ioctl, making this a userspace-triggerable heap out-of-bounds write. Fix by checking the incremented index against the buffer bound before the second write and returning -EINVAL if the buffer is too small to contain the extended command. | |||||
| CVE-2026-53177 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix NULL pointer dereference PCIe errors detected by a Root Port or Downstream Port cause error recovery services to run on all subordinate devices regardless of administrative state. The .error_detected() callback, bnxt_io_error_detected(), disables and synchronizes IRQs via bnxt_disable_int_sync(), which calls bnxt_cp_num_to_irq_num() to map completion rings to IRQs using bp->bnapi. Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe error recovery on a closed NIC can dereference a NULL pointer. Check if bp->bnapi is NULL before disabling and synchronizing IRQs. | |||||
| CVE-2026-53179 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix buffer over-read in rtw_update_protection rtw_update_protection() is called with a pointer offset into the ies buffer but the full ie_length is passed, causing a potential buffer over-read. | |||||
| CVE-2026-53149 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Bound root directory content to block size __tb_property_parse_dir() does not check that content_offset + content_len fits within block_len for the root directory case. When rootdir->length equals or exceeds block_len - 2, the entry loop reads past the allocated property block. Add a bounds check after computing content_offset and content_len to reject directories whose content extends past the block. | |||||
| CVE-2026-53150 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Reject zero-length property entries in validator tb_property_entry_valid() accepts entries with length == 0 for DIRECTORY, DATA, and TEXT types. A zero-length TEXT entry passes validation but causes an underflow in the null-termination logic: property->value.text[property->length * 4 - 1] = '\0'; When property->length is 0 this writes to offset -1 relative to the allocation. Reject zero-length entries early in the validator since they have no valid representation in the XDomain property protocol. | |||||
| CVE-2026-53151 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix the ACK parser to extract the SACK table for parsing Fix modification of the received skbuff in rxrpc_input_soft_acks() and a potential incorrect access of the buffer in a fragmented UDP packet (the packet would probably have to be deliberately pre-generated as fragmented) when AF_RXRPC tries to extract the contents of the SACK table by copying out the contents of the SACK table into a buffer before attempting to parse AF_RXRPC assumes that it can just call skb_condense() and then validly access the SACK table from skb->data and that it will be a flat buffer - but skb_condense() can silently fail to do anything under some circumstances. Note that whilst rxrpc_input_soft_acks() should be able to parse extended ACKs, the rest of AF_RXRPC doesn't currently support that. Further, there's then no need to call skb_condense() in rxrpc_input_ack(), so don't. | |||||
| CVE-2026-53152 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mmc: dw_mmc-rockchip: Add missing private data for very old controllers The really old controllers (rk2928, rk3066, rk3188) do not support UHS speeds at all, and thus never handled phase data. For that reason it never had a parse_dt callback and no driver private data at all. Commit ff6f0286c896 ("mmc: dw_mmc-rockchip: Add memory clock auto-gating support") makes the private data sort of mandatory, because the init function checks whether phases are configured internally or through the clock controller. This results in the old SoCs then experiencing NULL-pointer dereferences when they try to access that private-data struct. While we could have if (priv) conditionals in all places, it's way less cluttery to just give the old types their private-data struct. | |||||
| CVE-2026-53162 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: memcg: use round-robin victim selection in refill_stock Harry Yoo reported that get_random_u32_below() is not safe to call in the nmi context and memcg charge draining can happen in nmi context. More specifically get_random_u32_below() is neither reentrant- nor NMI-safe: it acquires a per-cpu local_lock via local_lock_irqsave() on the batched_entropy_u32 state. An NMI that lands on a CPU mid-update of the ChaCha batch state and recurses into the random subsystem would corrupt that state. The memcg_stock local_trylock prevents re-entry on the percpu stock itself, but cannot protect an unrelated subsystem's per-cpu lock. Replace the random pick with a per-cpu round-robin counter stored in memcg_stock_pcp and serialized by the same local_trylock that already guards cached[] and nr_pages[]. No atomics, no random calls, no extra locks needed. | |||||
| CVE-2026-53161 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free of fastrpc_user in workqueue context There is a race between fastrpc_device_release() and the workqueue that processes DSP responses. When the user closes the file descriptor, fastrpc_device_release() frees the fastrpc_user structure. Concurrently, an in-flight DSP invocation can complete and fastrpc_rpmsg_callback() schedules context cleanup via schedule_work(&ctx->put_work). If the workqueue runs fastrpc_context_free() in parallel with or after fastrpc_device_release() has freed the user structure, it dereferences the freed fastrpc_user. Depending on the state of the context at the time of the race, any one of the following accesses can be hit: 1. fastrpc_buf_free() calls fastrpc_ipa_to_dma_addr(buf->fl->cctx, ...) to strip the SID bits from the stored IOVA before passing the physical address to dma_free_coherent(). 2. fastrpc_free_map() reads map->fl->cctx->vmperms[0].vmid to reconstruct the source permission bitmask needed for the qcom_scm_assign_mem() call that returns memory from the DSP VM back to HLOS. 3. fastrpc_free_map() acquires map->fl->lock to safely remove the map node from the fl->maps list. The resulting use-after-free manifests as: pc : fastrpc_buf_free+0x38/0x80 [fastrpc] lr : fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_put_wq+0x78/0xa0 [fastrpc] process_one_work+0x180/0x450 worker_thread+0x26c/0x388 Add kref-based reference counting to fastrpc_user. Have each invoke context take a reference on the user at allocation time and release it when the context is freed. Release the initial reference in fastrpc_device_release() at file close. Move the teardown of the user structure — freeing pending contexts, maps, mmaps, and the channel context reference — into the kref release callback fastrpc_user_free(), so that it runs only when the last reference is dropped, regardless of whether that happens at device close or after the final in-flight context completes. | |||||
| CVE-2026-53160 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free race in fastrpc_map_create fastrpc_map_lookup returns a raw pointer after releasing fl->lock. The caller fastrpc_map_create then calls fastrpc_map_get (kref_get_unless_zero) on this unprotected pointer. A concurrent MEM_UNMAP can free the map between the lock release and the kref operation, resulting in a use-after-free on the freed slab object. Restore the take_ref parameter to fastrpc_map_lookup so the reference is acquired atomically under fl->lock before the pointer is exposed to the caller. | |||||
| CVE-2026-53156 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nvmem: core: fix use-after-free bugs in error paths Fix several instances of error paths in which we call __nvmem_device_put() - which may end up freeing the underlying memory and other resources - and then keep on using the nvmem structure. Always put the reference to the nvmem device as the last step before returning the error code. | |||||
| CVE-2026-53128 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drbd: Balance RCU calls in drbd_adm_dump_devices() Make drbd_adm_dump_devices() call rcu_read_lock() before rcu_read_unlock() is called. This has been detected by the Clang thread-safety analyzer. | |||||
| CVE-2026-53129 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fs/mbcache: cancel shrink work before destroying the cache mb_cache_destroy() calls shrinker_free() and then frees all cache entries and the cache itself, but it does not cancel the pending c_shrink_work work item first. If mb_cache_entry_create() schedules c_shrink_work via schedule_work() and the work item is still pending or running when mb_cache_destroy() runs, mb_cache_shrink_worker() will access the cache after its memory has been freed, causing a use-after-free. This is only reachable by a privileged user (root or CAP_SYS_ADMIN) who can trigger the last put of a mounted ext2/ext4/ocfs2 filesystem. Cancel the work item with cancel_work_sync() before calling shrinker_free(), ensuring the worker has finished and will not be rescheduled before the cache is torn down. | |||||