Filtered by vendor Linux
Subscribe
Total
17833 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-53103 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bonding: restore bond's IFF_SLAVE flag if a non-eth dev enslave fails syzbot reported a warning[1] where the bond device itself is a slave and we try to enslave a non-ethernet device as the first slave which fails but then in the error path when ether_setup() restores the bond device it also clears all flags. In my previous fix[2] I restored the IFF_MASTER flag, but I didn't consider the case that the bond device itself might also be a slave with IFF_SLAVE set, so we need to restore that flag as well. Use the bond_ether_setup helper which does the right thing and restores the bond's flags properly. Steps to reproduce using a nlmon dev: $ ip l add nlmon0 type nlmon $ ip l add bond1 type bond $ ip l add bond2 type bond $ ip l set bond1 master bond2 $ ip l set dev nlmon0 master bond1 $ ip -d l sh dev bond1 22: bond1: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noqueue master bond2 state DOWN mode DEFAULT group default qlen 1000 (now bond1's IFF_SLAVE flag is gone and we'll hit a warning[3] if we try to delete it) [1] https://syzkaller.appspot.com/bug?id=391c7b1f6522182899efba27d891f1743e8eb3ef [2] commit 7d5cd2ce5292 ("bonding: correctly handle bonding type change on enslave failure") [3] example warning: [ 27.008664] bond1: (slave nlmon0): The slave device specified does not support setting the MAC address [ 27.008692] bond1: (slave nlmon0): Error -95 calling set_mac_address [ 32.464639] bond1 (unregistering): Released all slaves [ 32.464685] ------------[ cut here ]------------ [ 32.464686] WARNING: CPU: 1 PID: 2004 at net/core/dev.c:10829 unregister_netdevice_many+0x72a/0x780 [ 32.464694] Modules linked in: br_netfilter bridge bonding virtio_net [ 32.464699] CPU: 1 PID: 2004 Comm: ip Kdump: loaded Not tainted 5.18.0-rc3+ #47 [ 32.464703] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 32.464704] RIP: 0010:unregister_netdevice_many+0x72a/0x780 [ 32.464707] Code: 99 fd ff ff ba 90 1a 00 00 48 c7 c6 f4 02 66 96 48 c7 c7 20 4d 35 96 c6 05 fa c7 2b 02 01 e8 be 6f 4a 00 0f 0b e9 73 fd ff ff <0f> 0b e9 5f fd ff ff 80 3d e3 c7 2b 02 00 0f 85 3b fd ff ff ba 59 [ 32.464710] RSP: 0018:ffffa006422d7820 EFLAGS: 00010206 [ 32.464712] RAX: ffff8f6e077140a0 RBX: ffffa006422d7888 RCX: 0000000000000000 [ 32.464714] RDX: ffff8f6e12edbe58 RSI: 0000000000000296 RDI: ffffffff96d4a520 [ 32.464716] RBP: ffff8f6e07714000 R08: ffffffff96d63600 R09: ffffa006422d7728 [ 32.464717] R10: 0000000000000ec0 R11: ffffffff9698c988 R12: ffff8f6e12edb140 [ 32.464719] R13: dead000000000122 R14: dead000000000100 R15: ffff8f6e12edb140 [ 32.464723] FS: 00007f297c2f1740(0000) GS:ffff8f6e5d900000(0000) knlGS:0000000000000000 [ 32.464725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 32.464726] CR2: 00007f297bf1c800 CR3: 00000000115e8000 CR4: 0000000000350ee0 [ 32.464730] Call Trace: [ 32.464763] <TASK> [ 32.464767] rtnl_dellink+0x13e/0x380 [ 32.464776] ? cred_has_capability.isra.0+0x68/0x100 [ 32.464780] ? __rtnl_unlock+0x33/0x60 [ 32.464783] ? bpf_lsm_capset+0x10/0x10 [ 32.464786] ? security_capable+0x36/0x50 [ 32.464790] rtnetlink_rcv_msg+0x14e/0x3b0 [ 32.464792] ? _copy_to_iter+0xb1/0x790 [ 32.464796] ? post_alloc_hook+0xa0/0x160 [ 32.464799] ? rtnl_calcit.isra.0+0x110/0x110 [ 32.464802] netlink_rcv_skb+0x50/0xf0 [ 32.464806] netlink_unicast+0x216/0x340 [ 32.464809] netlink_sendmsg+0x23f/0x480 [ 32.464812] sock_sendmsg+0x5e/0x60 [ 32.464815] ____sys_sendmsg+0x22c/0x270 [ 32.464818] ? import_iovec+0x17/0x20 [ 32.464821] ? sendmsg_copy_msghdr+0x59/0x90 [ 32.464823] ? do_set_pte+0xa0/0xe0 [ 32.464828] ___sys_sendmsg+0x81/0xc0 [ 32.464832] ? mod_objcg_state+0xc6/0x300 [ 32.464835] ? refill_obj_stock+0xa9/0x160 [ 32.464838] ? memcg_slab_free_hook+0x1a5/0x1f0 [ 32.464842] __sys_sendm ---truncated--- | |||||
| CVE-2023-53102 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ice: xsk: disable txq irq before flushing hw ice_qp_dis() intends to stop a given queue pair that is a target of xsk pool attach/detach. One of the steps is to disable interrupts on these queues. It currently is broken in a way that txq irq is turned off *after* HW flush which in turn takes no effect. ice_qp_dis(): -> ice_qvec_dis_irq() --> disable rxq irq --> flush hw -> ice_vsi_stop_tx_ring() -->disable txq irq Below splat can be triggered by following steps: - start xdpsock WITHOUT loading xdp prog - run xdp_rxq_info with XDP_TX action on this interface - start traffic - terminate xdpsock [ 256.312485] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 256.319560] #PF: supervisor read access in kernel mode [ 256.324775] #PF: error_code(0x0000) - not-present page [ 256.329994] PGD 0 P4D 0 [ 256.332574] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 256.337006] CPU: 3 PID: 32 Comm: ksoftirqd/3 Tainted: G OE 6.2.0-rc5+ #51 [ 256.345218] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 256.355807] RIP: 0010:ice_clean_rx_irq_zc+0x9c/0x7d0 [ice] [ 256.361423] Code: b7 8f 8a 00 00 00 66 39 ca 0f 84 f1 04 00 00 49 8b 47 40 4c 8b 24 d0 41 0f b7 45 04 66 25 ff 3f 66 89 04 24 0f 84 85 02 00 00 <49> 8b 44 24 18 0f b7 14 24 48 05 00 01 00 00 49 89 04 24 49 89 44 [ 256.380463] RSP: 0018:ffffc900088bfd20 EFLAGS: 00010206 [ 256.385765] RAX: 000000000000003c RBX: 0000000000000035 RCX: 000000000000067f [ 256.393012] RDX: 0000000000000775 RSI: 0000000000000000 RDI: ffff8881deb3ac80 [ 256.400256] RBP: 000000000000003c R08: ffff889847982710 R09: 0000000000010000 [ 256.407500] R10: ffffffff82c060c0 R11: 0000000000000004 R12: 0000000000000000 [ 256.414746] R13: ffff88811165eea0 R14: ffffc9000d255000 R15: ffff888119b37600 [ 256.421990] FS: 0000000000000000(0000) GS:ffff8897e0cc0000(0000) knlGS:0000000000000000 [ 256.430207] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 256.436036] CR2: 0000000000000018 CR3: 0000000005c0a006 CR4: 00000000007706e0 [ 256.443283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 256.450527] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 256.457770] PKRU: 55555554 [ 256.460529] Call Trace: [ 256.463015] <TASK> [ 256.465157] ? ice_xmit_zc+0x6e/0x150 [ice] [ 256.469437] ice_napi_poll+0x46d/0x680 [ice] [ 256.473815] ? _raw_spin_unlock_irqrestore+0x1b/0x40 [ 256.478863] __napi_poll+0x29/0x160 [ 256.482409] net_rx_action+0x136/0x260 [ 256.486222] __do_softirq+0xe8/0x2e5 [ 256.489853] ? smpboot_thread_fn+0x2c/0x270 [ 256.494108] run_ksoftirqd+0x2a/0x50 [ 256.497747] smpboot_thread_fn+0x1c1/0x270 [ 256.501907] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 256.506594] kthread+0xea/0x120 [ 256.509785] ? __pfx_kthread+0x10/0x10 [ 256.513597] ret_from_fork+0x29/0x50 [ 256.517238] </TASK> In fact, irqs were not disabled and napi managed to be scheduled and run while xsk_pool pointer was still valid, but SW ring of xdp_buff pointers was already freed. To fix this, call ice_qvec_dis_irq() after ice_vsi_stop_tx_ring(). Also while at it, remove redundant ice_clean_rx_ring() call - this is handled in ice_qp_clean_rings(). | |||||
| CVE-2023-53101 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: zero i_disksize when initializing the bootloader inode If the boot loader inode has never been used before, the EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the i_size to 0. However, if the "never before used" boot loader has a non-zero i_size, then i_disksize will be non-zero, and the inconsistency between i_size and i_disksize can trigger a kernel warning: WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319 CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa RIP: 0010:ext4_file_write_iter+0xbc7/0xd10 Call Trace: vfs_write+0x3b1/0x5c0 ksys_write+0x77/0x160 __x64_sys_write+0x22/0x30 do_syscall_64+0x39/0x80 Reproducer: 1. create corrupted image and mount it: mke2fs -t ext4 /tmp/foo.img 200 debugfs -wR "sif <5> size 25700" /tmp/foo.img mount -t ext4 /tmp/foo.img /mnt cd /mnt echo 123 > file 2. Run the reproducer program: posix_memalign(&buf, 1024, 1024) fd = open("file", O_RDWR | O_DIRECT); ioctl(fd, EXT4_IOC_SWAP_BOOT); write(fd, buf, 1024); Fix this by setting i_disksize as well as i_size to zero when initiaizing the boot loader inode. | |||||
| CVE-2023-53100 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix WARNING in ext4_update_inline_data Syzbot found the following issue: EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none. fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-aesni" fscrypt: AES-256-XTS using implementation "xts-aes-aesni" ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5071 at mm/page_alloc.c:5525 __alloc_pages+0x30a/0x560 mm/page_alloc.c:5525 Modules linked in: CPU: 1 PID: 5071 Comm: syz-executor263 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:__alloc_pages+0x30a/0x560 mm/page_alloc.c:5525 RSP: 0018:ffffc90003c2f1c0 EFLAGS: 00010246 RAX: ffffc90003c2f220 RBX: 0000000000000014 RCX: 0000000000000000 RDX: 0000000000000028 RSI: 0000000000000000 RDI: ffffc90003c2f248 RBP: ffffc90003c2f2d8 R08: dffffc0000000000 R09: ffffc90003c2f220 R10: fffff52000785e49 R11: 1ffff92000785e44 R12: 0000000000040d40 R13: 1ffff92000785e40 R14: dffffc0000000000 R15: 1ffff92000785e3c FS: 0000555556c0d300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95d5e04138 CR3: 00000000793aa000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __alloc_pages_node include/linux/gfp.h:237 [inline] alloc_pages_node include/linux/gfp.h:260 [inline] __kmalloc_large_node+0x95/0x1e0 mm/slab_common.c:1113 __do_kmalloc_node mm/slab_common.c:956 [inline] __kmalloc+0xfe/0x190 mm/slab_common.c:981 kmalloc include/linux/slab.h:584 [inline] kzalloc include/linux/slab.h:720 [inline] ext4_update_inline_data+0x236/0x6b0 fs/ext4/inline.c:346 ext4_update_inline_dir fs/ext4/inline.c:1115 [inline] ext4_try_add_inline_entry+0x328/0x990 fs/ext4/inline.c:1307 ext4_add_entry+0x5a4/0xeb0 fs/ext4/namei.c:2385 ext4_add_nondir+0x96/0x260 fs/ext4/namei.c:2772 ext4_create+0x36c/0x560 fs/ext4/namei.c:2817 lookup_open fs/namei.c:3413 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x12ac/0x2dd0 fs/namei.c:3711 do_filp_open+0x264/0x4f0 fs/namei.c:3741 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_openat fs/open.c:1342 [inline] __se_sys_openat fs/open.c:1337 [inline] __x64_sys_openat+0x243/0x290 fs/open.c:1337 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Above issue happens as follows: ext4_iget ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60 ext4_try_add_inline_entry __ext4_mark_inode_dirty ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44 ext4_xattr_shift_entries ->after shift i_inline_off is incorrect, actually is change to 176 ext4_try_add_inline_entry ext4_update_inline_dir get_max_inline_xattr_value_size if (EXT4_I(inode)->i_inline_off) entry = (struct ext4_xattr_entry *)((void *)raw_inode + EXT4_I(inode)->i_inline_off); free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size)); ->As entry is incorrect, then 'free' may be negative ext4_update_inline_data value = kzalloc(len, GFP_NOFS); -> len is unsigned int, maybe very large, then trigger warning when 'kzalloc()' To resolve the above issue we need to update 'i_inline_off' after 'ext4_xattr_shift_entries()'. We do not need to set EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty() already sets this flag if needed. Setting EXT4_STATE_MAY_INLINE_DATA when it is needed may trigger a BUG_ON in ext4_writepages(). | |||||
| CVE-2023-53099 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: firmware: xilinx: don't make a sleepable memory allocation from an atomic context The following issue was discovered using lockdep: [ 6.691371] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:209 [ 6.694602] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0 [ 6.702431] 2 locks held by swapper/0/1: [ 6.706300] #0: ffffff8800f6f188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x4c/0x90 [ 6.714900] #1: ffffffc009a2abb8 (enable_lock){....}-{2:2}, at: clk_enable_lock+0x4c/0x140 [ 6.723156] irq event stamp: 304030 [ 6.726596] hardirqs last enabled at (304029): [<ffffffc008d17ee0>] _raw_spin_unlock_irqrestore+0xc0/0xd0 [ 6.736142] hardirqs last disabled at (304030): [<ffffffc00876bc5c>] clk_enable_lock+0xfc/0x140 [ 6.744742] softirqs last enabled at (303958): [<ffffffc0080904f0>] _stext+0x4f0/0x894 [ 6.752655] softirqs last disabled at (303951): [<ffffffc0080e53b8>] irq_exit+0x238/0x280 [ 6.760744] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G U 5.15.36 #2 [ 6.768048] Hardware name: xlnx,zynqmp (DT) [ 6.772179] Call trace: [ 6.774584] dump_backtrace+0x0/0x300 [ 6.778197] show_stack+0x18/0x30 [ 6.781465] dump_stack_lvl+0xb8/0xec [ 6.785077] dump_stack+0x1c/0x38 [ 6.788345] ___might_sleep+0x1a8/0x2a0 [ 6.792129] __might_sleep+0x6c/0xd0 [ 6.795655] kmem_cache_alloc_trace+0x270/0x3d0 [ 6.800127] do_feature_check_call+0x100/0x220 [ 6.804513] zynqmp_pm_invoke_fn+0x8c/0xb0 [ 6.808555] zynqmp_pm_clock_getstate+0x90/0xe0 [ 6.813027] zynqmp_pll_is_enabled+0x8c/0x120 [ 6.817327] zynqmp_pll_enable+0x38/0xc0 [ 6.821197] clk_core_enable+0x144/0x400 [ 6.825067] clk_core_enable+0xd4/0x400 [ 6.828851] clk_core_enable+0xd4/0x400 [ 6.832635] clk_core_enable+0xd4/0x400 [ 6.836419] clk_core_enable+0xd4/0x400 [ 6.840203] clk_core_enable+0xd4/0x400 [ 6.843987] clk_core_enable+0xd4/0x400 [ 6.847771] clk_core_enable+0xd4/0x400 [ 6.851555] clk_core_enable_lock+0x24/0x50 [ 6.855683] clk_enable+0x24/0x40 [ 6.858952] fclk_probe+0x84/0xf0 [ 6.862220] platform_probe+0x8c/0x110 [ 6.865918] really_probe+0x110/0x5f0 [ 6.869530] __driver_probe_device+0xcc/0x210 [ 6.873830] driver_probe_device+0x64/0x140 [ 6.877958] __driver_attach+0x114/0x1f0 [ 6.881828] bus_for_each_dev+0xe8/0x160 [ 6.885698] driver_attach+0x34/0x50 [ 6.889224] bus_add_driver+0x228/0x300 [ 6.893008] driver_register+0xc0/0x1e0 [ 6.896792] __platform_driver_register+0x44/0x60 [ 6.901436] fclk_driver_init+0x1c/0x28 [ 6.905220] do_one_initcall+0x104/0x590 [ 6.909091] kernel_init_freeable+0x254/0x2bc [ 6.913390] kernel_init+0x24/0x130 [ 6.916831] ret_from_fork+0x10/0x20 Fix it by passing the GFP_ATOMIC gfp flag for the corresponding memory allocation. | |||||
| CVE-2023-53098 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: rc: gpio-ir-recv: add remove function In case runtime PM is enabled, do runtime PM clean up to remove cpu latency qos request, otherwise driver removal may have below kernel dump: [ 19.463299] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [ 19.472161] Mem abort info: [ 19.474985] ESR = 0x0000000096000004 [ 19.478754] EC = 0x25: DABT (current EL), IL = 32 bits [ 19.484081] SET = 0, FnV = 0 [ 19.487149] EA = 0, S1PTW = 0 [ 19.490361] FSC = 0x04: level 0 translation fault [ 19.495256] Data abort info: [ 19.498149] ISV = 0, ISS = 0x00000004 [ 19.501997] CM = 0, WnR = 0 [ 19.504977] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000049f81000 [ 19.511432] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000 [ 19.518245] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 19.524520] Modules linked in: gpio_ir_recv(+) rc_core [last unloaded: rc_core] [ 19.531845] CPU: 0 PID: 445 Comm: insmod Not tainted 6.2.0-rc1-00028-g2c397a46d47c #72 [ 19.531854] Hardware name: FSL i.MX8MM EVK board (DT) [ 19.531859] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 19.551777] pc : cpu_latency_qos_remove_request+0x20/0x110 [ 19.557277] lr : gpio_ir_recv_runtime_suspend+0x18/0x30 [gpio_ir_recv] [ 19.557294] sp : ffff800008ce3740 [ 19.557297] x29: ffff800008ce3740 x28: 0000000000000000 x27: ffff800008ce3d50 [ 19.574270] x26: ffffc7e3e9cea100 x25: 00000000000f4240 x24: ffffc7e3f9ef0e30 [ 19.574284] x23: 0000000000000000 x22: ffff0061803820f4 x21: 0000000000000008 [ 19.574296] x20: ffffc7e3fa75df30 x19: 0000000000000020 x18: ffffffffffffffff [ 19.588570] x17: 0000000000000000 x16: ffffc7e3f9efab70 x15: ffffffffffffffff [ 19.595712] x14: ffff800008ce37b8 x13: ffff800008ce37aa x12: 0000000000000001 [ 19.602853] x11: 0000000000000001 x10: ffffcbe3ec0dff87 x9 : 0000000000000008 [ 19.609991] x8 : 0101010101010101 x7 : 0000000000000000 x6 : 000000000f0bfe9f [ 19.624261] x5 : 00ffffffffffffff x4 : 0025ab8e00000000 x3 : ffff006180382010 [ 19.631405] x2 : ffffc7e3e9ce8030 x1 : ffffc7e3fc3eb810 x0 : 0000000000000020 [ 19.638548] Call trace: [ 19.640995] cpu_latency_qos_remove_request+0x20/0x110 [ 19.646142] gpio_ir_recv_runtime_suspend+0x18/0x30 [gpio_ir_recv] [ 19.652339] pm_generic_runtime_suspend+0x2c/0x44 [ 19.657055] __rpm_callback+0x48/0x1dc [ 19.660807] rpm_callback+0x6c/0x80 [ 19.664301] rpm_suspend+0x10c/0x640 [ 19.667880] rpm_idle+0x250/0x2d0 [ 19.671198] update_autosuspend+0x38/0xe0 [ 19.675213] pm_runtime_set_autosuspend_delay+0x40/0x60 [ 19.680442] gpio_ir_recv_probe+0x1b4/0x21c [gpio_ir_recv] [ 19.685941] platform_probe+0x68/0xc0 [ 19.689610] really_probe+0xc0/0x3dc [ 19.693189] __driver_probe_device+0x7c/0x190 [ 19.697550] driver_probe_device+0x3c/0x110 [ 19.701739] __driver_attach+0xf4/0x200 [ 19.705578] bus_for_each_dev+0x70/0xd0 [ 19.709417] driver_attach+0x24/0x30 [ 19.712998] bus_add_driver+0x17c/0x240 [ 19.716834] driver_register+0x78/0x130 [ 19.720676] __platform_driver_register+0x28/0x34 [ 19.725386] gpio_ir_recv_driver_init+0x20/0x1000 [gpio_ir_recv] [ 19.731404] do_one_initcall+0x44/0x2ac [ 19.735243] do_init_module+0x48/0x1d0 [ 19.739003] load_module+0x19fc/0x2034 [ 19.742759] __do_sys_finit_module+0xac/0x12c [ 19.747124] __arm64_sys_finit_module+0x20/0x30 [ 19.751664] invoke_syscall+0x48/0x114 [ 19.755420] el0_svc_common.constprop.0+0xcc/0xec [ 19.760132] do_el0_svc+0x38/0xb0 [ 19.763456] el0_svc+0x2c/0x84 [ 19.766516] el0t_64_sync_handler+0xf4/0x120 [ 19.770789] el0t_64_sync+0x190/0x194 [ 19.774460] Code: 910003fd a90153f3 aa0003f3 91204021 (f9401400) [ 19.780556] ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2023-53097 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. | |||||
| CVE-2023-53096 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: fix mem leak when freeing nodes The node link array is allocated when adding links to a node but is not deallocated when nodes are destroyed. | |||||
| CVE-2023-53095 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix a NULL pointer dereference The LRU mechanism may look up a resource in the process of being removed from an object. The locking rules here are a bit unclear but it looks currently like res->bo assignment is protected by the LRU lock, whereas bo->resource is protected by the object lock, while *clearing* of bo->resource is also protected by the LRU lock. This means that if we check that bo->resource points to the LRU resource under the LRU lock we should be safe. So perform that check before deciding to swap out a bo. That avoids dereferencing a NULL bo->resource in ttm_bo_swapout(). | |||||
| CVE-2023-53094 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: fsl_lpuart: fix race on RX DMA shutdown From time to time DMA completion can come in the middle of DMA shutdown: <process ctx>: <IRQ>: lpuart32_shutdown() lpuart_dma_shutdown() del_timer_sync() lpuart_dma_rx_complete() lpuart_copy_rx_to_tty() mod_timer() lpuart_dma_rx_free() When the timer fires a bit later, sport->dma_rx_desc is NULL: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 pc : lpuart_copy_rx_to_tty+0xcc/0x5bc lr : lpuart_timer_func+0x1c/0x2c Call trace: lpuart_copy_rx_to_tty lpuart_timer_func call_timer_fn __run_timers.part.0 run_timer_softirq __do_softirq __irq_exit_rcu irq_exit handle_domain_irq gic_handle_irq call_on_irq_stack do_interrupt_handler ... To fix this fold del_timer_sync() into lpuart_dma_rx_free() after dmaengine_terminate_sync() to make sure timer will not be re-started in lpuart_copy_rx_to_tty() <= lpuart_dma_rx_complete(). | |||||
| CVE-2023-53093 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Do not let histogram values have some modifiers Histogram values can not be strings, stacktraces, graphs, symbols, syscalls, or grouped in buckets or log. Give an error if a value is set to do so. Note, the histogram code was not prepared to handle these modifiers for histograms and caused a bug. Mark Rutland reported: # echo 'p:copy_to_user __arch_copy_to_user n=$arg2' >> /sys/kernel/tracing/kprobe_events # echo 'hist:keys=n:vals=hitcount.buckets=8:sort=hitcount' > /sys/kernel/tracing/events/kprobes/copy_to_user/trigger # cat /sys/kernel/tracing/events/kprobes/copy_to_user/hist [ 143.694628] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 143.695190] Mem abort info: [ 143.695362] ESR = 0x0000000096000004 [ 143.695604] EC = 0x25: DABT (current EL), IL = 32 bits [ 143.695889] SET = 0, FnV = 0 [ 143.696077] EA = 0, S1PTW = 0 [ 143.696302] FSC = 0x04: level 0 translation fault [ 143.702381] Data abort info: [ 143.702614] ISV = 0, ISS = 0x00000004 [ 143.702832] CM = 0, WnR = 0 [ 143.703087] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000448f9000 [ 143.703407] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 143.704137] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 143.704714] Modules linked in: [ 143.705273] CPU: 0 PID: 133 Comm: cat Not tainted 6.2.0-00003-g6fc512c10a7c #3 [ 143.706138] Hardware name: linux,dummy-virt (DT) [ 143.706723] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 143.707120] pc : hist_field_name.part.0+0x14/0x140 [ 143.707504] lr : hist_field_name.part.0+0x104/0x140 [ 143.707774] sp : ffff800008333a30 [ 143.707952] x29: ffff800008333a30 x28: 0000000000000001 x27: 0000000000400cc0 [ 143.708429] x26: ffffd7a653b20260 x25: 0000000000000000 x24: ffff10d303ee5800 [ 143.708776] x23: ffffd7a6539b27b0 x22: ffff10d303fb8c00 x21: 0000000000000001 [ 143.709127] x20: ffff10d303ec2000 x19: 0000000000000000 x18: 0000000000000000 [ 143.709478] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 143.709824] x14: 0000000000000000 x13: 203a6f666e692072 x12: 6567676972742023 [ 143.710179] x11: 0a230a6d6172676f x10: 000000000000002c x9 : ffffd7a6521e018c [ 143.710584] x8 : 000000000000002c x7 : 7f7f7f7f7f7f7f7f x6 : 000000000000002c [ 143.710915] x5 : ffff10d303b0103e x4 : ffffd7a653b20261 x3 : 000000000000003d [ 143.711239] x2 : 0000000000020001 x1 : 0000000000000001 x0 : 0000000000000000 [ 143.711746] Call trace: [ 143.712115] hist_field_name.part.0+0x14/0x140 [ 143.712642] hist_field_name.part.0+0x104/0x140 [ 143.712925] hist_field_print+0x28/0x140 [ 143.713125] event_hist_trigger_print+0x174/0x4d0 [ 143.713348] hist_show+0xf8/0x980 [ 143.713521] seq_read_iter+0x1bc/0x4b0 [ 143.713711] seq_read+0x8c/0xc4 [ 143.713876] vfs_read+0xc8/0x2a4 [ 143.714043] ksys_read+0x70/0xfc [ 143.714218] __arm64_sys_read+0x24/0x30 [ 143.714400] invoke_syscall+0x50/0x120 [ 143.714587] el0_svc_common.constprop.0+0x4c/0x100 [ 143.714807] do_el0_svc+0x44/0xd0 [ 143.714970] el0_svc+0x2c/0x84 [ 143.715134] el0t_64_sync_handler+0xbc/0x140 [ 143.715334] el0t_64_sync+0x190/0x194 [ 143.715742] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (f9400000) [ 143.716510] ---[ end trace 0000000000000000 ]--- Segmentation fault | |||||
| CVE-2023-53092 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: exynos: fix node leak in probe PM QoS error path Make sure to add the newly allocated interconnect node to the provider before adding the PM QoS request so that the node is freed on errors. | |||||
| CVE-2023-53091 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: update s_journal_inum if it changes after journal replay When mounting a crafted ext4 image, s_journal_inum may change after journal replay, which is obviously unreasonable because we have successfully loaded and replayed the journal through the old s_journal_inum. And the new s_journal_inum bypasses some of the checks in ext4_get_journal(), which may trigger a null pointer dereference problem. So if s_journal_inum changes after the journal replay, we ignore the change, and rewrite the current journal_inum to the superblock. | |||||
| CVE-2023-53090 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix an illegal memory access In the kfd_wait_on_events() function, the kfd_event_waiter structure is allocated by alloc_event_waiters(), but the event field of the waiter structure is not initialized; When copy_from_user() fails in the kfd_wait_on_events() function, it will enter exception handling to release the previously allocated memory of the waiter structure; Due to the event field of the waiters structure being accessed in the free_waiters() function, this results in illegal memory access and system crash, here is the crash log: localhost kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x185/0x1e0 localhost kernel: RSP: 0018:ffffaa53c362bd60 EFLAGS: 00010082 localhost kernel: RAX: ff3d3d6bff4007cb RBX: 0000000000000282 RCX: 00000000002c0000 localhost kernel: RDX: ffff9e855eeacb80 RSI: 000000000000279c RDI: ffffe7088f6a21d0 localhost kernel: RBP: ffffe7088f6a21d0 R08: 00000000002c0000 R09: ffffaa53c362be64 localhost kernel: R10: ffffaa53c362bbd8 R11: 0000000000000001 R12: 0000000000000002 localhost kernel: R13: ffff9e7ead15d600 R14: 0000000000000000 R15: ffff9e7ead15d698 localhost kernel: FS: 0000152a3d111700(0000) GS:ffff9e855ee80000(0000) knlGS:0000000000000000 localhost kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 localhost kernel: CR2: 0000152938000010 CR3: 000000044d7a4000 CR4: 00000000003506e0 localhost kernel: Call Trace: localhost kernel: _raw_spin_lock_irqsave+0x30/0x40 localhost kernel: remove_wait_queue+0x12/0x50 localhost kernel: kfd_wait_on_events+0x1b6/0x490 [hydcu] localhost kernel: ? ftrace_graph_caller+0xa0/0xa0 localhost kernel: kfd_ioctl+0x38c/0x4a0 [hydcu] localhost kernel: ? kfd_ioctl_set_trap_handler+0x70/0x70 [hydcu] localhost kernel: ? kfd_ioctl_create_queue+0x5a0/0x5a0 [hydcu] localhost kernel: ? ftrace_graph_caller+0xa0/0xa0 localhost kernel: __x64_sys_ioctl+0x8e/0xd0 localhost kernel: ? syscall_trace_enter.isra.18+0x143/0x1b0 localhost kernel: do_syscall_64+0x33/0x80 localhost kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 localhost kernel: RIP: 0033:0x152a4dff68d7 Allocate the structure with kcalloc, and remove redundant 0-initialization and a redundant loop condition check. | |||||
| CVE-2023-53089 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix task hung in ext4_xattr_delete_inode Syzbot reported a hung task problem: ================================================================== INFO: task syz-executor232:5073 blocked for more than 143 seconds. Not tainted 6.2.0-rc2-syzkaller-00024-g512dee0c00ad #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-exec232 state:D stack:21024 pid:5073 ppid:5072 flags:0x00004004 Call Trace: <TASK> context_switch kernel/sched/core.c:5244 [inline] __schedule+0x995/0xe20 kernel/sched/core.c:6555 schedule+0xcb/0x190 kernel/sched/core.c:6631 __wait_on_freeing_inode fs/inode.c:2196 [inline] find_inode_fast+0x35a/0x4c0 fs/inode.c:950 iget_locked+0xb1/0x830 fs/inode.c:1273 __ext4_iget+0x22e/0x3ed0 fs/ext4/inode.c:4861 ext4_xattr_inode_iget+0x68/0x4e0 fs/ext4/xattr.c:389 ext4_xattr_inode_dec_ref_all+0x1a7/0xe50 fs/ext4/xattr.c:1148 ext4_xattr_delete_inode+0xb04/0xcd0 fs/ext4/xattr.c:2880 ext4_evict_inode+0xd7c/0x10b0 fs/ext4/inode.c:296 evict+0x2a4/0x620 fs/inode.c:664 ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474 __ext4_fill_super fs/ext4/super.c:5516 [inline] ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644 get_tree_bdev+0x400/0x620 fs/super.c:1282 vfs_get_tree+0x88/0x270 fs/super.c:1489 do_new_mount+0x289/0xad0 fs/namespace.c:3145 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa5406fd5ea RSP: 002b:00007ffc7232f968 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fa5406fd5ea RDX: 0000000020000440 RSI: 0000000020000000 RDI: 00007ffc7232f970 RBP: 00007ffc7232f970 R08: 00007ffc7232f9b0 R09: 0000000000000432 R10: 0000000000804a03 R11: 0000000000000202 R12: 0000000000000004 R13: 0000555556a7a2c0 R14: 00007ffc7232f9b0 R15: 0000000000000000 </TASK> ================================================================== The problem is that the inode contains an xattr entry with ea_inum of 15 when cleaning up an orphan inode <15>. When evict inode <15>, the reference counting of the corresponding EA inode is decreased. When EA inode <15> is found by find_inode_fast() in __ext4_iget(), it is found that the EA inode holds the I_FREEING flag and waits for the EA inode to complete deletion. As a result, when inode <15> is being deleted, we wait for inode <15> to complete the deletion, resulting in an infinite loop and triggering Hung Task. To solve this problem, we only need to check whether the ino of EA inode and parent is the same before getting EA inode. | |||||
| CVE-2023-53088 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix UaF in listener shutdown As reported by Christoph after having refactored the passive socket initialization, the mptcp listener shutdown path is prone to an UaF issue. BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x73/0xe0 Write of size 4 at addr ffff88810cb23098 by task syz-executor731/1266 CPU: 1 PID: 1266 Comm: syz-executor731 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6e/0x91 print_report+0x16a/0x46f kasan_report+0xad/0x130 kasan_check_range+0x14a/0x1a0 _raw_spin_lock_bh+0x73/0xe0 subflow_error_report+0x6d/0x110 sk_error_report+0x3b/0x190 tcp_disconnect+0x138c/0x1aa0 inet_child_forget+0x6f/0x2e0 inet_csk_listen_stop+0x209/0x1060 __mptcp_close_ssk+0x52d/0x610 mptcp_destroy_common+0x165/0x640 mptcp_destroy+0x13/0x80 __mptcp_destroy_sock+0xe7/0x270 __mptcp_close+0x70e/0x9b0 mptcp_close+0x2b/0x150 inet_release+0xe9/0x1f0 __sock_release+0xd2/0x280 sock_close+0x15/0x20 __fput+0x252/0xa20 task_work_run+0x169/0x250 exit_to_user_mode_prepare+0x113/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The msk grace period can legitly expire in between the last reference count dropped in mptcp_subflow_queue_clean() and the later eventual access in inet_csk_listen_stop() After the previous patch we don't need anymore special-casing msk listener socket cleanup: the mptcp worker will process each of the unaccepted msk sockets. Just drop the now unnecessary code. Please note this commit depends on the two parent ones: mptcp: refactor passive socket initialization mptcp: use the workqueue to destroy unaccepted sockets | |||||
| CVE-2023-53087 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/active: Fix misuse of non-idle barriers as fence trackers Users reported oopses on list corruptions when using i915 perf with a number of concurrently running graphics applications. Root cause analysis pointed at an issue in barrier processing code -- a race among perf open / close replacing active barriers with perf requests on kernel context and concurrent barrier preallocate / acquire operations performed during user context first pin / last unpin. When adding a request to a composite tracker, we try to reuse an existing fence tracker, already allocated and registered with that composite. The tracker we obtain may already track another fence, may be an idle barrier, or an active barrier. If the tracker we get occurs a non-idle barrier then we try to delete that barrier from a list of barrier tasks it belongs to. However, while doing that we don't respect return value from a function that performs the barrier deletion. Should the deletion ever fail, we would end up reusing the tracker still registered as a barrier task. Since the same structure field is reused with both fence callback lists and barrier tasks list, list corruptions would likely occur. Barriers are now deleted from a barrier tasks list by temporarily removing the list content, traversing that content with skip over the node to be deleted, then populating the list back with the modified content. Should that intentionally racy concurrent deletion attempts be not serialized, one or more of those may fail because of the list being temporary empty. Related code that ignores the results of barrier deletion was initially introduced in v5.4 by commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"). However, all users of the barrier deletion routine were apparently serialized at that time, then the issue didn't exhibit itself. Results of git bisect with help of a newly developed igt@gem_barrier_race@remote-request IGT test indicate that list corruptions might start to appear after commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), introduced in v5.5. Respect results of barrier deletion attempts -- mark the barrier as idle only if successfully deleted from the list. Then, before proceeding with setting our fence as the one currently tracked, make sure that the tracker we've got is not a non-idle barrier. If that check fails then don't use that tracker but go back and try to acquire a new, usable one. v3: use unlikely() to document what outcome we expect (Andi), - fix bad grammar in commit description. v2: no code changes, - blame commit 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles"), v5.5, not commit d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests"), v5.4, - reword commit description. (cherry picked from commit 506006055769b10d1b2b4e22f636f3b45e0e9fc7) | |||||
| CVE-2023-53086 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: do not check WED status for non-mmio devices WED is supported just for mmio devices, so do not check it for usb or sdio devices. This patch fixes the crash reported below: [ 21.946627] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.525298] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.548274] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.557694] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.565885] wlp0s3u1i3: authenticated [ 22.569502] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 1/3) [ 22.578966] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=30 aid=3) [ 22.579113] wlp0s3u1i3: c4:41:1e:f5:2b:1d rejected association temporarily; comeback duration 1000 TU (1024 ms) [ 23.649518] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 2/3) [ 23.752528] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=0 aid=3) [ 23.797450] wlp0s3u1i3: associated [ 24.959527] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 24.959640] BUG: unable to handle page fault for address: ffff88800c223200 [ 24.959706] #PF: supervisor instruction fetch in kernel mode [ 24.959788] #PF: error_code(0x0011) - permissions violation [ 24.959846] PGD 2c01067 P4D 2c01067 PUD 2c02067 PMD c2a8063 PTE 800000000c223163 [ 24.959957] Oops: 0011 [#1] PREEMPT SMP [ 24.960009] CPU: 0 PID: 391 Comm: wpa_supplicant Not tainted 6.2.0-kvm #18 [ 24.960089] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 24.960191] RIP: 0010:0xffff88800c223200 [ 24.960446] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282 [ 24.960513] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058 [ 24.960598] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010 [ 24.960682] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c [ 24.960766] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001 [ 24.960853] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644 [ 24.960950] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 [ 24.961036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.961106] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0 [ 24.961190] Call Trace: [ 24.961219] <TASK> [ 24.961245] ? mt76_connac_mcu_add_key+0x2cf/0x310 [ 24.961313] ? mt7921_set_key+0x150/0x200 [ 24.961365] ? drv_set_key+0xa9/0x1b0 [ 24.961418] ? ieee80211_key_enable_hw_accel+0xd9/0x240 [ 24.961485] ? ieee80211_key_replace+0x3f3/0x730 [ 24.961541] ? crypto_shash_setkey+0x89/0xd0 [ 24.961597] ? ieee80211_key_link+0x2d7/0x3a0 [ 24.961664] ? crypto_aead_setauthsize+0x31/0x50 [ 24.961730] ? sta_info_hash_lookup+0xa6/0xf0 [ 24.961785] ? ieee80211_add_key+0x1fc/0x250 [ 24.961842] ? rdev_add_key+0x41/0x140 [ 24.961882] ? nl80211_parse_key+0x6c/0x2f0 [ 24.961940] ? nl80211_new_key+0x24a/0x290 [ 24.961984] ? genl_rcv_msg+0x36c/0x3a0 [ 24.962036] ? rdev_mod_link_station+0xe0/0xe0 [ 24.962102] ? nl80211_set_key+0x410/0x410 [ 24.962143] ? nl80211_pre_doit+0x200/0x200 [ 24.962187] ? genl_bind+0xc0/0xc0 [ 24.962217] ? netlink_rcv_skb+0xaa/0xd0 [ 24.962259] ? genl_rcv+0x24/0x40 [ 24.962300] ? netlink_unicast+0x224/0x2f0 [ 24.962345] ? netlink_sendmsg+0x30b/0x3d0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962440] ? __import_iovec+0x2e/0x110 [ 24.962482] ? ___sys_sendmsg+0xbe/0xe0 [ 24.962525] ? mod_objcg_state+0x25c/0x330 [ 24.962576] ? __dentry_kill+0x19e/0x1d0 [ 24.962618] ? call_rcu+0x18f/0x270 [ 24.962660] ? __dentry_kill+0x19e/0x1d0 [ 24.962702] ? __x64_sys_sendmsg+0x70/0x90 [ 24.962744] ? do_syscall_64+0x3d/0x80 [ 24.962796] ? exit_to_user_mode_prepare+0x1b/0x70 [ 24.962852] ? entry_SYSCA ---truncated--- | |||||
| CVE-2023-53085 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/edid: fix info leak when failing to get panel id Make sure to clear the transfer buffer before fetching the EDID to avoid leaking slab data to the logs on errors that leave the buffer unchanged. | |||||
| CVE-2023-53084 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/shmem-helper: Remove another errant put in error path drm_gem_shmem_mmap() doesn't own reference in error code path, resulting in the dma-buf shmem GEM object getting prematurely freed leading to a later use-after-free. | |||||