Filtered by vendor Linux
Subscribe
Total
18770 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-8036 | 3 Linux, Microsoft, Ni | 4 Linux Kernel, Windows, Linux Real-time and 1 more | 2026-07-22 | N/A | 7.1 HIGH |
| Improper input validation in NI-PAL may allow a local authenticated user to access arbitrary system memory, potentially leading to privilege escalation. This vulnerability affects NI-PAL 26.3.0 and prior versions on Windows and Linux. | |||||
| CVE-2025-71314 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Recover from panthor_gpu_flush_caches() failures We have seen a few cases where the whole memory subsystem is blocked and flush operations never complete. When that happens, we want to: - schedule a reset, so we can recover from this situation - in the reset path, we need to reset the pending_reqs so we can send new commands after the reset - if more panthor_gpu_flush_caches() operations are queued after the timeout, we skip them and return -EIO directly to avoid needless waits (the memory block won't miraculously work again) Note that we drop the WARN_ON()s because these hangs can be triggered with buggy GPU jobs created by the UMD, and there's no way we can prevent it. We do keep the error messages though. v2: - New patch v3: - Collect R-b - Explicitly mention the fact we dropped the WARN_ON()s in the commit message v4: - No changes | |||||
| CVE-2025-71313 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Add missing NULL check for alloc_workqueue() alloc_workqueue() can return NULL on memory allocation failure. Without proper error checking, this may lead to a NULL pointer dereference when queue_work() is later called with the NULL workqueue pointer in epf_ntb_epc_init(). Add a NULL check immediately after alloc_workqueue() and return -ENOMEM on failure to prevent the driver from loading with an invalid workqueue pointer. | |||||
| CVE-2026-8035 | 3 Linux, Microsoft, Ni | 4 Linux Kernel, Windows, Linux Real-time and 1 more | 2026-07-22 | N/A | 7.1 HIGH |
| Improper input validation in the NI-PAL kernel driver may allow a local authenticated user to cause a denial of service by triggering a crash due to a NULL pointer dereference. This vulnerability affects NI-PAL 26.3.0 and prior versions on Windows and Linux. | |||||
| CVE-2026-53358 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen() l2cap_chan_close() removes the channel from conn->chan_l, which must be done under conn->lock. cleanup_listen() runs under the parent sk_lock, so acquiring conn->lock would invert the established conn->lock -> chan->lock -> sk_lock order. Instead of calling l2cap_chan_close() directly, schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously. The timeout handler already acquires conn->lock and chan->lock in the correct order. The timer is only armed when chan->conn is still set: if it is already NULL, l2cap_conn_del() has already processed this channel (l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb), so there is nothing left to do. If l2cap_conn_del() races in after the timer is armed, __clear_chan_timer() inside l2cap_chan_del() cancels it; if the timer has already fired, the handler returns harmlessly because chan->conn was cleared. | |||||
| CVE-2026-53359 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected role Commit 0cb2af2ea66ad ("KVM: x86: Fix shadow paging use-after-free due to unexpected GFN") fixed a shadow paging mismatch between stored and computed GFNs; the bug could be triggered by changing a PDE mapping from outside the guest, and then deleting a memslot. The rmap_remove() call would miss entries created after the PDE change because the GFN of the leaf SPTE does not match the GFN of the struct kvm_mmu_page. A similar hole however remains if the modified PDE points to a non-leaf page. In this case the gfn can be made to match, but the role does not match: the original large 2MB page creates a kvm_mmu_page with direct=1, while the new 4KB needs a kvm_mmu_page with direct=0. However, kvm_mmu_get_child_sp() does not compare the role, and therefore reuses the page. The next step is installing a leaf (4KB) SPTE on the new path which records an rmap entry under the gfn resolved by the walk. But when that child is zapped its parent kvm_mmu_page has direct=1 and kvm_mmu_page_get_gfn() computes the gfn for the 4KB page as sp->gfn + index instead of using sp->shadowed_translation[] (or sp->gfns[] in older kernels). It therefore fails to remove the recorded entry. When the memslot is dropped the shadow page is freed but the rmap entry survives, as in the scenario that was already fixed. Code that later walks that gfn (dirty logging, MMU notifier invalidation, and so on) dereferences an sptep that lies in the freed page, causing the use-after-free. | |||||
| CVE-2026-53360 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use As per the GHCB spec, when using GHCB v2+ require the software scratch area to reside in the GHCB's shared buffer. Note, things like Page State Change (PSC) requests _rely_ on this behavior, as the guest can't provide a length when making the request, i.e. the size of the guest payload is bounded by the size of the shared buffer. Failure to force usage of the GHCB, and a slew of other flaws, lets a malicious SNP guest corrupt host kernel heap memory, and leak host heap layout information. setup_vmgexit_scratch() allocates a buffer via kvzalloc(exit_info_2), where exit_info_2 is guest-controlled. With exit_info_2=24, this yields a 24-byte allocation in kmalloc-cg-32 (32-byte slab objects). The buffer holds an 8-byte psc_hdr followed by 8-byte psc_entry structs, so only entries[0] and entries[1] are in-bounds. snp_begin_psc() validates end_entry against VMGEXIT_PSC_MAX_COUNT (253) but NOT against the actual buffer size: idx_end = hdr->end_entry; if (idx_end >= VMGEXIT_PSC_MAX_COUNT) { // checks 253, not buffer snp_complete_psc(svm, ...); return 1; } for (idx = idx_start; idx <= idx_end; idx++) { entry_start = entries[idx]; // OOB when idx >= 2 The guest sets end_entry=10+, causing the host to iterate entries[2+] which are OOB into adjacent slab objects. For each OOB entry: - The host reads 8 bytes (OOB READ / info leak oracle) - If the data passes PSC validation, __snp_complete_one_psc() writes cur_page = 1 or 512 into the entry (OOB WRITE, sev.c:3806) - If validation fails, the error response reveals whether adjacent memory is zero vs non-zero (information disclosure to guest) The guest controls allocation size (exit_info_2), entry range (cur_entry/end_entry), and can fire unlimited VMGEXITs to repeatedly hit different slab positions. By exploiting the variety of bugs, a malicious SEV-SNP guest can: - OOB read adjacent kmalloc-cg-32 objects (heap layout disclosure) - OOB write cur_page bits into adjacent objects (heap corruption) - Trigger use-after-free conditions across VMGEXITs E.g. with KASAN enabled, a single insmod of the PoC guest module produces 73 KASAN reports: BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x126/0x890 Read of size 8 at addr ffff888219ffb5e0 by task qemu-system-x86/2199 BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x468/0x890 Write of size 8 at addr ffff888351566648 by task qemu-system-x86/2199 The buggy address belongs to the object at ffff888XXXXXXXXX which belongs to the cache kmalloc-cg-32 of size 32 The buggy address is located N bytes to the right of allocated 32-byte region [ffff888XXXXXXXXX, ffff888XXXXXXXXX) Breakdown: 62 slab-out-of-bounds (reads + writes past allocation) 7 slab-use-after-free 4 use-after-free All credit to Stan for the wonderful description and reproducer! [sean: write changelog] | |||||
| CVE-2026-53361 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Set gc_in_progress to true in unix_gc(). Igor Ushakov reported that unix_gc() could run with gc_in_progress being false if the work is scheduled while running: Thread 1 Thread 2 Thread 3 -------- -------- -------- unix_schedule_gc() unix_schedule_gc() `- if (!gc_in_progress) `- if (!gc_in_progress) |- gc_in_progress = true | `- queue_work() | unix_gc() <----------------/ | | |- gc_in_progress = true ... `- queue_work() | | `- gc_in_progress = false | | unix_gc() <---------------------------------------------' | ... /* gc_in_progress == false */ | `- gc_in_progress = false unix_peek_fpl() relies on gc_in_progress not to confuse GC by MSG_PEEK. Let's set gc_in_progress to true in unix_gc(). | |||||
| CVE-2026-53362 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: account for fraggap on the paged allocation path In __ip6_append_data(), when the paged-allocation branch is taken (MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are computed as alloclen = fragheaderlen + transhdrlen; pagedlen = datalen - transhdrlen; datalen already includes fraggap (datalen = length + fraggap). When fraggap is non-zero, this is not the first skb and transhdrlen is zero. The fraggap bytes carried over from the previous skb are copied just past the fragment headers in the new skb's linear area. The linear area is therefore undersized by fraggap bytes while pagedlen is overstated by the same amount, and the copy writes past skb->end into the trailing skb_shared_info. An unprivileged user can trigger this via a UDPv6 socket using MSG_MORE together with MSG_SPLICE_PAGES. The bad accounting was introduced by commit 773ba4fe9104 ("ipv6: avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix __ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative copy value caused -EINVAL to be returned. That later commit allowed MSG_SPLICE_PAGES to proceed in this case, making the corruption triggerable. The non-paged branch sets alloclen to fraglen, which already accounts for fraggap because datalen does. Bring the paged branch in line by adding fraggap to alloclen and subtracting it from pagedlen. After this adjustment, copy no longer collapses to -fraggap on the paged path, so remove the stale comment describing that old arithmetic. Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES case, remove the MSG_SPLICE_PAGES exception from the negative copy check. | |||||
| CVE-2026-53363 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags() iptfs_consume_frags() transfers paged fragments from one socket buffer to another but fails to propagate the SKBFL_SHARED_FRAG flag. This is the same class of bug that was fixed in skb_try_coalesce() for CVE-2026-46300: when fragments backed by read-only page-cache pages are merged, the marker indicating their shared nature must be preserved so that ESP can decide correctly whether in-place encryption is safe. Apply the same two-line fix used in skb_try_coalesce() to iptfs_consume_frags(). | |||||
| CVE-2026-53364 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Fix memory leak in hci_le_big_terminate() hci_le_big_terminate() allocates iso_list_data via kzalloc_obj but returns 0 without freeing it when neither pa_sync_term nor big_sync_term flags are set after evaluating the PA and BIG sync connection state. This early-return path was introduced when hci_le_big_terminate() was refactored to take struct hci_conn instead of raw u8 parameters, adding PA/BIG flag evaluation logic. The existing kfree() on hci_cmd_sync_queue failure does not cover this path. | |||||
| CVE-2026-53357 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 8.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() bt_accept_dequeue() unlinks a not-yet-accepted child from the parent accept queue and release_sock()s it before returning, so the returned sk has no caller reference and is unlocked. l2cap_sock_cleanup_listen() walks these children on listening-socket close. A concurrent HCI disconnect drives hci_rx_work -> l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and frees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the accept_q list/poll and takes temporary refs inside bt_accept_dequeue(), and CVE-2025-39860 serialises the userspace close()/accept() race by calling cleanup_listen() under lock_sock() in l2cap_sock_release(). Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF still reproduces on current bluetooth/master. Take the reference at the source: bt_accept_dequeue() does sock_hold() while sk is still locked, before release_sock(); callers sock_put(). cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under the parent sk lock and that would invert conn->lock -> chan->lock -> sk_lock (lockdep). KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced 12 use-after-free reports per run before this change; 0, and no lockdep report, over 1600+ raced iterations after it on bluetooth/master. | |||||
| CVE-2026-53009 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-07-22 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix double-free of tx_buf skb If ice_tso() or ice_tx_csum() fail, the error path in ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points to it and is marked as valid (ICE_TX_BUF_SKB). 'next_to_use' remains unchanged, so the potential problem will likely fix itself when the next packet is transmitted and the tx_buf gets overwritten. But if there is no next packet and the interface is brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf() will find the tx_buf and free the skb for the second time. The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error path, so that ice_unmap_and_free_tx_buf(). Move the initialization of 'first' up, to ensure it's already valid in case we hit the linearization error path. The bug was spotted by AI while I had it looking for something else. It also proposed an initial version of the patch. I reproduced the bug and tested the fix by adding code to inject failures, on a build with KASAN. I looked for similar bugs in related Intel drivers and did not find any. | |||||
| CVE-2026-43329 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups. | |||||
| CVE-2026-43112 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath When cifs_sanitize_prepath is called with an empty string or a string containing only delimiters (e.g., "/"), the current logic attempts to check *(cursor2 - 1) before cursor2 has advanced. This results in an out-of-bounds read. This patch adds an early exit check after stripping prepended delimiters. If no path content remains, the function returns NULL. The bug was identified via manual audit and verified using a standalone test case compiled with AddressSanitizer, which triggered a SEGV on affected inputs. | |||||
| CVE-2023-3390 | 2 Linux, Netapp | 6 Linux Kernel, H300s, H410c and 3 more | 2026-07-22 | N/A | 7.8 HIGH |
| A use-after-free vulnerability was found in the Linux kernel's netfilter subsystem in net/netfilter/nf_tables_api.c. Mishandled error handling with NFT_MSG_NEWRULE makes it possible to use a dangling pointer in the same transaction causing a use-after-free vulnerability. This flaw allows a local attacker with user access to cause a privilege escalation issue. We recommend upgrading past commit 1240eb93f0616b21c675416516ff3d74798fdc97 | |||||
| CVE-2024-0639 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-07-21 | N/A | 5.5 MEDIUM |
| A denial of service vulnerability due to a deadlock was found in sctp_auto_asconf_init in net/sctp/socket.c in the Linux kernel’s SCTP subsystem. This flaw allows guests with local user privileges to trigger a deadlock and potentially crash the system. | |||||
| CVE-2024-0443 | 3 Fedoraproject, Linux, Redhat | 3 Fedora, Linux Kernel, Enterprise Linux | 2026-07-21 | N/A | 5.5 MEDIUM |
| A flaw was found in the blkgs destruction path in block/blk-cgroup.c in the Linux kernel, leading to a cgroup blkio memory leakage problem. When a cgroup is being destroyed, cgroup_rstat_flush() is only called at css_release_work_fn(), which is called when the blkcg reference count reaches 0. This circular dependency will prevent blkcg and some blkgs from being freed after they are made offline. This issue may allow an attacker with a local access to cause system instability, such as an out of memory error. | |||||
| CVE-2023-3640 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-07-21 | N/A | 7.0 HIGH |
| A possible unauthorized memory access flaw was found in the Linux kernel's cpu_entry_area mapping of X86 CPU data to memory, where a user may guess the location of exception stacks or other important data. Based on the previous CVE-2023-0597, the 'Randomize per-cpu entry area' feature was implemented in /arch/x86/mm/cpu_entry_area.c, which works through the init_cea_offsets() function when KASLR is enabled. However, despite this feature, there is still a risk of per-cpu entry area leaks. This issue could allow a local user to gain access to some important data with memory in an expected location and potentially escalate their privileges on the system. | |||||
| CVE-2026-23435 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86: Move event pointer setup earlier in x86_pmu_enable() A production AMD EPYC system crashed with a NULL pointer dereference in the PMU NMI handler: BUG: kernel NULL pointer dereference, address: 0000000000000198 RIP: x86_perf_event_update+0xc/0xa0 Call Trace: <NMI> amd_pmu_v2_handle_irq+0x1a6/0x390 perf_event_nmi_handler+0x24/0x40 The faulting instruction is `cmpq $0x0, 0x198(%rdi)` with RDI=0, corresponding to the `if (unlikely(!hwc->event_base))` check in x86_perf_event_update() where hwc = &event->hw and event is NULL. drgn inspection of the vmcore on CPU 106 showed a mismatch between cpuc->active_mask and cpuc->events[]: active_mask: 0x1e (bits 1, 2, 3, 4) events[1]: 0xff1100136cbd4f38 (valid) events[2]: 0x0 (NULL, but active_mask bit 2 set) events[3]: 0xff1100076fd2cf38 (valid) events[4]: 0xff1100079e990a90 (valid) The event that should occupy events[2] was found in event_list[2] with hw.idx=2 and hw.state=0x0, confirming x86_pmu_start() had run (which clears hw.state and sets active_mask) but events[2] was never populated. Another event (event_list[0]) had hw.state=0x7 (STOPPED|UPTODATE|ARCH), showing it was stopped when the PMU rescheduled events, confirming the throttle-then-reschedule sequence occurred. The root cause is commit 7e772a93eb61 ("perf/x86: Fix NULL event access and potential PEBS record loss") which moved the cpuc->events[idx] assignment out of x86_pmu_start() and into step 2 of x86_pmu_enable(), after the PERF_HES_ARCH check. This broke any path that calls pmu->start() without going through x86_pmu_enable() -- specifically the unthrottle path: perf_adjust_freq_unthr_events() -> perf_event_unthrottle_group() -> perf_event_unthrottle() -> event->pmu->start(event, 0) -> x86_pmu_start() // sets active_mask but not events[] The race sequence is: 1. A group of perf events overflows, triggering group throttle via perf_event_throttle_group(). All events are stopped: active_mask bits cleared, events[] preserved (x86_pmu_stop no longer clears events[] after commit 7e772a93eb61). 2. While still throttled (PERF_HES_STOPPED), x86_pmu_enable() runs due to other scheduling activity. Stopped events that need to move counters get PERF_HES_ARCH set and events[old_idx] cleared. In step 2 of x86_pmu_enable(), PERF_HES_ARCH causes these events to be skipped -- events[new_idx] is never set. 3. The timer tick unthrottles the group via pmu->start(). Since commit 7e772a93eb61 removed the events[] assignment from x86_pmu_start(), active_mask[new_idx] is set but events[new_idx] remains NULL. 4. A PMC overflow NMI fires. The handler iterates active counters, finds active_mask[2] set, reads events[2] which is NULL, and crashes dereferencing it. Move the cpuc->events[hwc->idx] assignment in x86_pmu_enable() to before the PERF_HES_ARCH check, so that events[] is populated even for events that are not immediately started. This ensures the unthrottle path via pmu->start() always finds a valid event pointer. | |||||