Filtered by vendor Linux
Subscribe
Total
12184 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-21903 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mctp i3c: handle NULL header address daddr can be NULL if there is no neighbour table entry present, in that case the tx packet should be dropped. saddr will usually be set by MCTP core, but check for NULL in case a packet is transmitted by a different protocol. | |||||
| CVE-2025-21902 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: acpi: typec: ucsi: Introduce a ->poll_cci method For the ACPI backend of UCSI the UCSI "registers" are just a memory copy of the register values in an opregion. The ACPI implementation in the BIOS ensures that the opregion contents are synced to the embedded controller and it ensures that the registers (in particular CCI) are synced back to the opregion on notifications. While there is an ACPI call that syncs the actual registers to the opregion there is rarely a need to do this and on some ACPI implementations it actually breaks in various interesting ways. The only reason to force a sync from the embedded controller is to poll CCI while notifications are disabled. Only the ucsi core knows if this is the case and guessing based on the current command is suboptimal, i.e. leading to the following spurious assertion splat: WARNING: CPU: 3 PID: 76 at drivers/usb/typec/ucsi/ucsi.c:1388 ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] CPU: 3 UID: 0 PID: 76 Comm: kworker/3:0 Not tainted 6.12.11-200.fc41.x86_64 #1 Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023 Workqueue: events_long ucsi_init_work [typec_ucsi] RIP: 0010:ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] Call Trace: <TASK> ucsi_init_work+0x3c/0xac0 [typec_ucsi] process_one_work+0x179/0x330 worker_thread+0x252/0x390 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Thus introduce a ->poll_cci() method that works like ->read_cci() with an additional forced sync and document that this should be used when polling with notifications disabled. For all other backends that presumably don't have this issue use the same implementation for both methods. | |||||
| CVE-2025-57870 | 4 Esri, Kubernetes, Linux and 1 more | 4 Arcgis Server, Kubernetes, Linux Kernel and 1 more | 2025-10-31 | N/A | 10.0 CRITICAL |
| A SQL Injection vulnerability exists in Esri ArcGIS Server versions 11.3, 11.4 and 11.5 on Windows, Linux and Kubernetes. This vulnerability allows a remote, unauthenticated attacker to execute arbitrary SQL commands via a specific ArcGIS Feature Service operation. Successful exploitation can potentially result in unauthorized access, modification, or deletion of data from the underlying Enterprise Geodatabase. | |||||
| CVE-2025-21899 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix bad hist from corrupting named_triggers list The following commands causes a crash: ~# cd /sys/kernel/tracing/events/rcu/rcu_callback ~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=bad:keys=common_pid' > trigger Because the following occurs: event_trigger_write() { trigger_process_regex() { event_hist_trigger_parse() { data = event_trigger_alloc(..); event_trigger_register(.., data) { cmd_ops->reg(.., data, ..) [hist_register_trigger()] { data->ops->init() [event_hist_trigger_init()] { save_named_trigger(name, data) { list_add(&data->named_list, &named_triggers); } } } } ret = create_actions(); (return -EINVAL) if (ret) goto out_unreg; [..] ret = hist_trigger_enable(data, ...) { list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!) [..] out_unreg: event_hist_unregister(.., data) { cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] { list_for_each_entry(iter, &file->triggers, list) { if (!hist_trigger_match(data, iter, named_data, false)) <- never matches continue; [..] test = iter; } if (test && test->ops->free) <<<-- test is NULL test->ops->free(test) [event_hist_trigger_free()] { [..] if (data->name) del_named_trigger(data) { list_del(&data->named_list); <<<<-- NEVER gets removed! } } } } [..] kfree(data); <<<-- frees item but it is still on list The next time a hist with name is registered, it causes an u-a-f bug and the kernel can crash. Move the code around such that if event_trigger_register() succeeds, the next thing called is hist_trigger_enable() which adds it to the list. A bunch of actions is called if get_named_trigger_data() returns false. But that doesn't need to be called after event_trigger_register(), so it can be moved up, allowing event_trigger_register() to be called just before hist_trigger_enable() keeping them together and allowing the file->triggers to be properly populated. | |||||
| CVE-2025-21897 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance() a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()") added a workaround to handle the cases where pick_task_scx() is called without prececing balance_scx() which is due to a fair class bug where pick_taks_fair() may return NULL after a true return from balance_fair(). The workaround detects when pick_task_scx() is called without preceding balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid stalling. Unfortunately, the workaround code was testing whether @prev was on SCX to decide whether to keep the task running. This is incorrect as the task may be on SCX but no longer runnable. This could lead to a non-runnable task to be returned from pick_task_scx() which cause interesting confusions and failures. e.g. A common failure mode is the task ending up with (!on_rq && on_cpu) state which can cause potential wakers to busy loop, which can easily lead to deadlocks. Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes @prev_on_scx only used in one place. Open code the usage and improve the comment while at it. | |||||
| CVE-2025-21896 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fuse: revert back to __readahead_folio() for readahead In commit 3eab9d7bc2f4 ("fuse: convert readahead to use folios"), the logic was converted to using the new folio readahead code, which drops the reference on the folio once it is locked, using an inferred reference on the folio. Previously we held a reference on the folio for the entire duration of the readpages call. This is fine, however for the case for splice pipe responses where we will remove the old folio and splice in the new folio (see fuse_try_move_page()), we assume that there is a reference held on the folio for ap->folios, which is no longer the case. To fix this, revert back to __readahead_folio() which allows us to hold the reference on the folio for the duration of readpages until either we drop the reference ourselves in fuse_readpages_end() or the reference is dropped after it's replaced in the page cache in the splice case. This will fix the UAF bug that was reported. | |||||
| CVE-2025-21895 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same perf_event_pmu_context, but not in the same order. The problem is that the order of pmu_ctx_list for the parent is impacted by the time when an event/PMU is added. While the order for a child is impacted by the event order in the pinned_groups and flexible_groups. So the order of pmu_ctx_list in the parent and child may be different. To fix this problem, insert the perf_event_pmu_context to its proper place after iteration of the pmu_ctx_list. The follow testcase can trigger above warning: # perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out & # perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out test.c void main() { int count = 0; pid_t pid; printf("%d running\n", getpid()); sleep(30); printf("running\n"); pid = fork(); if (pid == -1) { printf("fork error\n"); return; } if (pid == 0) { while (1) { count++; } } else { while (1) { count++; } } } The testcase first opens an LBR event, so it will allocate task_ctx_data, and then open tracepoint and software events, so the parent context will have 3 different perf_event_pmu_contexts. On inheritance, child ctx will insert the perf_event_pmu_context in another order and the warning will trigger. [ mingo: Tidied up the changelog. ] | |||||
| CVE-2025-21894 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: VFs do not support HWTSTAMP_TX_ONESTEP_SYNC Actually ENETC VFs do not support HWTSTAMP_TX_ONESTEP_SYNC because only ENETC PF can access PMa_SINGLE_STEP registers. And there will be a crash if VFs are used to test one-step timestamp, the crash log as follows. [ 129.110909] Unable to handle kernel paging request at virtual address 00000000000080c0 [ 129.287769] Call trace: [ 129.290219] enetc_port_mac_wr+0x30/0xec (P) [ 129.294504] enetc_start_xmit+0xda4/0xe74 [ 129.298525] enetc_xmit+0x70/0xec [ 129.301848] dev_hard_start_xmit+0x98/0x118 | |||||
| CVE-2023-53033 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits If the offset + length goes over the ethernet + vlan header, then the length is adjusted to copy the bytes that are within the boundaries of the vlan_ethhdr scratchpad area. The remaining bytes beyond ethernet + vlan header are copied directly from the skbuff data area. Fix incorrect arithmetic operator: subtract, not add, the size of the vlan header in case of double-tagged packets to adjust the length accordingly to address CVE-2023-0179. | |||||
| CVE-2023-53032 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Fix overflow before widen in the bitmap_ip_create() function. When first_ip is 0, last_ip is 0xFFFFFFFF, and netmask is 31, the value of an arithmetic expression 2 << (netmask - mask_bits - 1) is subject to overflow due to a failure casting operands to a larger data type before performing the arithmetic. Note that it's harmless since the value will be checked at the next step. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2023-53031 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/imc-pmu: Fix use of mutex in IRQs disabled section Current imc-pmu code triggers a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP and CONFIG_PROVE_LOCKING enabled, while running a thread_imc event. Command to trigger the warning: # perf stat -e thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ sleep 5 Performance counter stats for 'sleep 5': 0 thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ 5.002117947 seconds time elapsed 0.000131000 seconds user 0.001063000 seconds sys Below is snippet of the warning in dmesg: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec preempt_count: 2, expected: 0 4 locks held by perf-exec/2869: #0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90 #1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0 #2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510 #3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510 irq event stamp: 4806 hardirqs last enabled at (4805): [<c000000000f65b94>] _raw_spin_unlock_irqrestore+0x94/0xd0 hardirqs last disabled at (4806): [<c0000000003fae44>] perf_event_exec+0x394/0x510 softirqs last enabled at (0): [<c00000000013c404>] copy_process+0xc34/0x1ff0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 #61 Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV Call Trace: dump_stack_lvl+0x98/0xe0 (unreliable) __might_resched+0x2f8/0x310 __mutex_lock+0x6c/0x13f0 thread_imc_event_add+0xf4/0x1b0 event_sched_in+0xe0/0x210 merge_sched_in+0x1f0/0x600 visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0 ctx_flexible_sched_in+0xcc/0x140 ctx_sched_in+0x20c/0x2a0 ctx_resched+0x104/0x1c0 perf_event_exec+0x340/0x510 begin_new_exec+0x730/0xef0 load_elf_binary+0x3f8/0x1e10 ... do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0 WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0 CPU: 36 PID: 2869 Comm: sleep Tainted: G W 6.2.0-rc2-00011-g1247637727f2 #61 Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV NIP: c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670 REGS: c00000004d2134e0 TRAP: 0700 Tainted: G W (6.2.0-rc2-00011-g1247637727f2) MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 48002824 XER: 00000000 CFAR: c00000000013fb64 IRQMASK: 1 The above warning triggered because the current imc-pmu code uses mutex lock in interrupt disabled sections. The function mutex_lock() internally calls __might_resched(), which will check if IRQs are disabled and in case IRQs are disabled, it will trigger the warning. Fix the issue by changing the mutex lock to spinlock. [mpe: Fix comments, trim oops in change log, add reported-by tags] | |||||
| CVE-2025-21955 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent connection release during oplock break notification ksmbd_work could be freed when after connection release. Increment r_count of ksmbd_conn to indicate that requests are not finished yet and to not release the connection. | |||||
| CVE-2025-21954 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netmem: prevent TX of unreadable skbs Currently on stable trees we have support for netmem/devmem RX but not TX. It is not safe to forward/redirect an RX unreadable netmem packet into the device's TX path, as the device may call dma-mapping APIs on dma addrs that should not be passed to it. Fix this by preventing the xmit of unreadable skbs. Tested by configuring tc redirect: sudo tc qdisc add dev eth1 ingress sudo tc filter add dev eth1 ingress protocol ip prio 1 flower ip_proto \ tcp src_ip 192.168.1.12 action mirred egress redirect dev eth1 Before, I see unreadable skbs in the driver's TX path passed to dma mapping APIs. After, I don't see unreadable skbs in the driver's TX path passed to dma mapping APIs. | |||||
| CVE-2025-21925 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: llc: do not use skb_get() before dev_queue_xmit() syzbot is able to crash hosts [1], using llc and devices not supporting IFF_TX_SKB_SHARING. In this case, e1000 driver calls eth_skb_pad(), while the skb is shared. Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c Note that e1000 driver might have an issue with pktgen, because it does not clear IFF_TX_SKB_SHARING, this is an orthogonal change. We need to audit other skb_get() uses in net/llc. [1] kernel BUG at net/core/skbuff.c:2178 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178 Call Trace: <TASK> __skb_pad+0x18a/0x610 net/core/skbuff.c:2466 __skb_put_padto include/linux/skbuff.h:3843 [inline] skb_put_padto include/linux/skbuff.h:3862 [inline] eth_skb_pad include/linux/etherdevice.h:656 [inline] e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3806 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:4045 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621 dev_queue_xmit include/linux/netdevice.h:3313 [inline] llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209 llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993 sock_sendmsg_nosec net/socket.c:718 [inline] | |||||
| CVE-2025-21924 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: make sure ptp clock is unregister and freed if hclge_ptp_get_cycle returns an error During the initialization of ptp, hclge_ptp_get_cycle might return an error and returned directly without unregister clock and free it. To avoid that, call hclge_ptp_destroy_clock to unregist and free clock if hclge_ptp_get_cycle failed. | |||||
| CVE-2025-21921 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device ethnl_req_get_phydev() is used to lookup a phy_device, in the case an ethtool netlink command targets a specific phydev within a netdev's topology. It takes as a parameter a const struct nlattr *header that's used for error handling : if (!phydev) { NL_SET_ERR_MSG_ATTR(extack, header, "no phy matching phyindex"); return ERR_PTR(-ENODEV); } In the notify path after a ->set operation however, there's no request attributes available. The typical callsite for the above function looks like: phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER], info->extack); So, when tb is NULL (such as in the ethnl notify path), we have a nice crash. It turns out that there's only the PLCA command that is in that case, as the other phydev-specific commands don't have a notification. This commit fixes the crash by passing the cmd index and the nlattr array separately, allowing NULL-checking it directly inside the helper. | |||||
| CVE-2025-21916 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: fix a flaw in existing endpoint checks Syzbot once again identified a flaw in usb endpoint checking, see [1]. This time the issue stems from a commit authored by me (2eabb655a968 ("usb: atm: cxacru: fix endpoint checking in cxacru_bind()")). While using usb_find_common_endpoints() may usually be enough to discard devices with wrong endpoints, in this case one needs more than just finding and identifying the sufficient number of endpoints of correct types - one needs to check the endpoint's address as well. Since cxacru_bind() fills URBs with CXACRU_EP_CMD address in mind, switch the endpoint verification approach to usb_check_XXX_endpoints() instead to fix incomplete ep testing. [1] Syzbot report: usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 1378 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... RIP: 0010:usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> cxacru_cm+0x3c8/0xe50 drivers/usb/atm/cxacru.c:649 cxacru_card_status drivers/usb/atm/cxacru.c:760 [inline] cxacru_bind+0xcf9/0x1150 drivers/usb/atm/cxacru.c:1223 usbatm_usb_probe+0x314/0x1d30 drivers/usb/atm/usbatm.c:1058 cxacru_usb_probe+0x184/0x220 drivers/usb/atm/cxacru.c:1377 usb_probe_interface+0x641/0xbb0 drivers/usb/core/driver.c:396 really_probe+0x2b9/0xad0 drivers/base/dd.c:658 __driver_probe_device+0x1a2/0x390 drivers/base/dd.c:800 driver_probe_device+0x50/0x430 drivers/base/dd.c:830 ... | |||||
| CVE-2025-21914 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: slimbus: messaging: Free transaction ID in delayed interrupt scenario In case of interrupt delay for any reason, slim_do_transfer() returns timeout error but the transaction ID (TID) is not freed. This results into invalid memory access inside qcom_slim_ngd_rx_msgq_cb() due to invalid TID. Fix the issue by freeing the TID in slim_do_transfer() before returning timeout error to avoid invalid memory access. Call trace: __memcpy_fromio+0x20/0x190 qcom_slim_ngd_rx_msgq_cb+0x130/0x290 [slim_qcom_ngd_ctrl] vchan_complete+0x2a0/0x4a0 tasklet_action_common+0x274/0x700 tasklet_action+0x28/0x3c _stext+0x188/0x620 run_ksoftirqd+0x34/0x74 smpboot_thread_fn+0x1d8/0x464 kthread+0x178/0x238 ret_from_fork+0x10/0x20 Code: aa0003e8 91000429 f100044a 3940002b (3800150b) ---[ end trace 0fe00bec2b975c99 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt. | |||||
| CVE-2025-21913 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range() Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results in the following warning: unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0) Call Trace: xen_read_msr+0x1e/0x30 amd_get_mmconfig_range+0x2b/0x80 quirk_amd_mmconfig_area+0x28/0x100 pnp_fixup_device+0x39/0x50 __pnp_add_device+0xf/0x150 pnp_add_device+0x3d/0x100 pnpacpi_add_device_handler+0x1f9/0x280 acpi_ns_get_device_callback+0x104/0x1c0 acpi_ns_walk_namespace+0x1d0/0x260 acpi_get_devices+0x8a/0xb0 pnpacpi_init+0x50/0x80 do_one_initcall+0x46/0x2e0 kernel_init_freeable+0x1da/0x2f0 kernel_init+0x16/0x1b0 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1b/0x30 based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the right course of action, so no change is needed there. This was most likely exposed by fixing the Xen MSR accessors to not be silently-safe. | |||||
| CVE-2025-21910 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: regulatory: improve invalid hints checking Syzbot keeps reporting an issue [1] that occurs when erroneous symbols sent from userspace get through into user_alpha2[] via regulatory_hint_user() call. Such invalid regulatory hints should be rejected. While a sanity check from commit 47caf685a685 ("cfg80211: regulatory: reject invalid hints") looks to be enough to deter these very cases, there is a way to get around it due to 2 reasons. 1) The way isalpha() works, symbols other than latin lower and upper letters may be used to determine a country/domain. For instance, greek letters will also be considered upper/lower letters and for such characters isalpha() will return true as well. However, ISO-3166-1 alpha2 codes should only hold latin characters. 2) While processing a user regulatory request, between reg_process_hint_user() and regulatory_hint_user() there happens to be a call to queue_regulatory_request() which modifies letters in request->alpha2[] with toupper(). This works fine for latin symbols, less so for weird letter characters from the second part of _ctype[]. Syzbot triggers a warning in is_user_regdom_saved() by first sending over an unexpected non-latin letter that gets malformed by toupper() into a character that ends up failing isalpha() check. Prevent this by enhancing is_an_alpha2() to ensure that incoming symbols are latin letters and nothing else. [1] Syzbot report: ------------[ cut here ]------------ Unexpected user alpha2: A� WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 Modules linked in: CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events_power_efficient crda_timeout_work RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline] RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline] RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 ... Call Trace: <TASK> crda_timeout_work+0x27/0x50 net/wireless/reg.c:542 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f2/0x390 kernel/kthread.c:389 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> | |||||