Filtered by vendor Linux
Subscribe
Total
18301 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-46896 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: don't access invalid sched Since 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()") accessing job->base.sched can produce unexpected results as the initialisation of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the memset. This commit fixes an issue when a CS would fail validation and would be rejected after job->num_ibs is incremented. In this case, amdgpu_ib_free(ring->adev, ...) will be called, which would crash the machine because the ring value is bogus. To fix this, pass a NULL pointer to amdgpu_ib_free(): we can do this because the device is actually not used in this function. The next commit will remove the ring argument completely. (cherry picked from commit 2ae520cb12831d264ceb97c61f72c59d33c0dbd7) | |||||
| CVE-2024-46871 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Correct the defined value for AMDGPU_DMUB_NOTIFICATION_MAX [Why & How] It actually exposes '6' types in enum dmub_notification_type. Not 5. Using smaller number to create array dmub_callback & dmub_thread_offload has potential to access item out of array bound. Fix it. | |||||
| CVE-2024-46870 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Disable DMCUB timeout for DCN35 [Why] DMCUB can intermittently take longer than expected to process commands. Old ASIC policy was to continue while logging a diagnostic error - which works fine for ASIC without IPS, but with IPS this could lead to a race condition where we attempt to access DCN state while it's inaccessible, leading to a system hang when the NIU port is not disabled or register accesses that timeout and the display configuration in an undefined state. [How] We need to investigate why these accesses take longer than expected, but for now we should disable the timeout on DCN35 to avoid this race condition. Since the waits happen only at lower interrupt levels the risk of taking too long at higher IRQ and causing a system watchdog timeout are minimal. | |||||
| CVE-2024-46869 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: Allocate memory for driver private data Fix driver not allocating memory for struct btintel_data which is used to store internal data. | |||||
| CVE-2024-46868 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire() If the __qcuefi pointer is not set, then in the original code, we would hold onto the lock. That means that if we tried to set it later, then it would cause a deadlock. Drop the lock on the error path. That's what all the callers are expecting. | |||||
| CVE-2024-46867 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/client: fix deadlock in show_meminfo() There is a real deadlock as well as sleeping in atomic() bug in here, if the bo put happens to be the last ref, since bo destruction wants to grab the same spinlock and sleeping locks. Fix that by dropping the ref using xe_bo_put_deferred(), and moving the final commit outside of the lock. Dropping the lock around the put is tricky since the bo can go out of scope and delete itself from the list, making it difficult to navigate to the next list entry. (cherry picked from commit 0083b8e6f11d7662283a267d4ce7c966812ffd8a) | |||||
| CVE-2024-46866 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/client: add missing bo locking in show_meminfo() bo_meminfo() wants to inspect bo state like tt and the ttm resource, however this state can change at any point leading to stuff like NPD and UAF, if the bo lock is not held. Grab the bo lock when calling bo_meminfo(), ensuring we drop any spinlocks first. In the case of object_idr we now also need to hold a ref. v2 (MattB) - Also add xe_bo_assert_held() (cherry picked from commit 4f63d712fa104c3ebefcb289d1e733e86d8698c7) | |||||
| CVE-2024-46865 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fou: fix initialization of grc The grc must be initialize first. There can be a condition where if fou is NULL, goto out will be executed and grc would be used uninitialized. | |||||
| CVE-2024-46864 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: fix kexec crash due to VP assist page corruption commit 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline") introduces a new cpuhp state for hyperv initialization. cpuhp_setup_state() returns the state number if state is CPUHP_AP_ONLINE_DYN or CPUHP_BP_PREPARE_DYN and 0 for all other states. For the hyperv case, since a new cpuhp state was introduced it would return 0. However, in hv_machine_shutdown(), the cpuhp_remove_state() call is conditioned upon "hyperv_init_cpuhp > 0". This will never be true and so hv_cpu_die() won't be called on all CPUs. This means the VP assist page won't be reset. When the kexec kernel tries to setup the VP assist page again, the hypervisor corrupts the memory region of the old VP assist page causing a panic in case the kexec kernel is using that memory elsewhere. This was originally fixed in commit dfe94d4086e4 ("x86/hyperv: Fix kexec panic/hang issues"). Get rid of hyperv_init_cpuhp entirely since we are no longer using a dynamic cpuhp state and use CPUHP_AP_HYPERV_ONLINE directly with cpuhp_remove_state(). | |||||
| CVE-2024-46863 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: soc-acpi-intel-lnl-match: add missing empty item There is no links_num in struct snd_soc_acpi_mach {}, and we test !link->num_adr as a condition to end the loop in hda_sdw_machine_select(). So an empty item in struct snd_soc_acpi_link_adr array is required. | |||||
| CVE-2024-46862 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: soc-acpi-intel-mtl-match: add missing empty item There is no links_num in struct snd_soc_acpi_mach {}, and we test !link->num_adr as a condition to end the loop in hda_sdw_machine_select(). So an empty item in struct snd_soc_acpi_link_adr array is required. | |||||
| CVE-2024-46861 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: do not stop RX on failing RX callback RX callbacks can fail for multiple reasons: * Payload too short * Payload formatted incorrecly (e.g. bad NCM framing) * Lack of memory None of these should cause the driver to seize up. Make such failures non-critical and continue processing further incoming URBs. | |||||
| CVE-2024-46860 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change When disabling wifi mt7921_ipv6_addr_change() is called as a notifier. At this point mvif->phy is already NULL so we cannot use it here. | |||||
| CVE-2024-46859 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses The panasonic laptop code in various places uses the SINF array with index values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array is big enough. Not all panasonic laptops have this many SINF array entries, for example the Toughbook CF-18 model only has 10 SINF array entries. So it only supports the AC+DC brightness entries and mute. Check that the SINF array has a minimum size which covers all AC+DC brightness entries and refuse to load if the SINF array is smaller. For higher SINF indexes hide the sysfs attributes when the SINF array does not contain an entry for that attribute, avoiding show()/store() accessing the array out of bounds and add bounds checking to the probe() and resume() code accessing these. | |||||
| CVE-2024-46858 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: Fix uaf in __timer_delete_sync There are two paths to access mptcp_pm_del_add_timer, result in a race condition: CPU1 CPU2 ==== ==== net_rx_action napi_poll netlink_sendmsg __napi_poll netlink_unicast process_backlog netlink_unicast_kernel __netif_receive_skb genl_rcv __netif_receive_skb_one_core netlink_rcv_skb NF_HOOK genl_rcv_msg ip_local_deliver_finish genl_family_rcv_msg ip_protocol_deliver_rcu genl_family_rcv_msg_doit tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit tcp_v4_do_rcv mptcp_nl_remove_addrs_list tcp_rcv_established mptcp_pm_remove_addrs_and_subflows tcp_data_queue remove_anno_list_by_saddr mptcp_incoming_options mptcp_pm_del_add_timer mptcp_pm_del_add_timer kfree(entry) In remove_anno_list_by_saddr(running on CPU2), after leaving the critical zone protected by "pm.lock", the entry will be released, which leads to the occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1). Keeping a reference to add_timer inside the lock, and calling sk_stop_timer_sync() with this reference, instead of "entry->add_timer". Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock, do not directly access any members of the entry outside the pm lock, which can avoid similar "entry->x" uaf. | |||||
| CVE-2024-46857 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix bridge mode operations when there are no VFs Currently, trying to set the bridge mode attribute when numvfs=0 leads to a crash: bridge link set dev eth2 hwmode vepa [ 168.967392] BUG: kernel NULL pointer dereference, address: 0000000000000030 [...] [ 168.969989] RIP: 0010:mlx5_add_flow_rules+0x1f/0x300 [mlx5_core] [...] [ 168.976037] Call Trace: [ 168.976188] <TASK> [ 168.978620] _mlx5_eswitch_set_vepa_locked+0x113/0x230 [mlx5_core] [ 168.979074] mlx5_eswitch_set_vepa+0x7f/0xa0 [mlx5_core] [ 168.979471] rtnl_bridge_setlink+0xe9/0x1f0 [ 168.979714] rtnetlink_rcv_msg+0x159/0x400 [ 168.980451] netlink_rcv_skb+0x54/0x100 [ 168.980675] netlink_unicast+0x241/0x360 [ 168.980918] netlink_sendmsg+0x1f6/0x430 [ 168.981162] ____sys_sendmsg+0x3bb/0x3f0 [ 168.982155] ___sys_sendmsg+0x88/0xd0 [ 168.985036] __sys_sendmsg+0x59/0xa0 [ 168.985477] do_syscall_64+0x79/0x150 [ 168.987273] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 168.987773] RIP: 0033:0x7f8f7950f917 (esw->fdb_table.legacy.vepa_fdb is null) The bridge mode is only relevant when there are multiple functions per port. Therefore, prevent setting and getting this setting when there are no VFs. Note that after this change, there are no settings to change on the PF interface using `bridge link` when there are no VFs, so the interface no longer appears in the `bridge link` output. | |||||
| CVE-2024-46856 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices The probe() function is only used for DP83822 and DP83826 PHY, leaving the private data pointer uninitialized for the DP83825 models which causes a NULL pointer dereference in the recently introduced/changed functions dp8382x_config_init() and dp83822_set_wol(). Add the dp8382x_probe() function, so all PHY models will have a valid private data pointer to fix this issue and also prevent similar issues in the future. | |||||
| CVE-2024-46855 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_socket: fix sk refcount leaks We must put 'sk' reference before returning. | |||||
| CVE-2024-46854 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: dpaa: Pad packets to ETH_ZLEN When sending packets under 60 bytes, up to three bytes of the buffer following the data may be leaked. Avoid this by extending all packets to ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be reproduced by running $ ping -s 11 destination | |||||
| CVE-2024-46853 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: spi: nxp-fspi: fix the KASAN report out-of-bounds bug Change the memcpy length to fix the out-of-bounds issue when writing the data that is not 4 byte aligned to TX FIFO. To reproduce the issue, write 3 bytes data to NOR chip. dd if=3b of=/dev/mtd0 [ 36.926103] ================================================================== [ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838 [ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455 [ 36.946721] [ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070 [ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT) [ 36.961260] Call trace: [ 36.963723] dump_backtrace+0x90/0xe8 [ 36.967414] show_stack+0x18/0x24 [ 36.970749] dump_stack_lvl+0x78/0x90 [ 36.974451] print_report+0x114/0x5cc [ 36.978151] kasan_report+0xa4/0xf0 [ 36.981670] __asan_report_load_n_noabort+0x1c/0x28 [ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838 [ 36.990800] spi_mem_exec_op+0x8ec/0xd30 [ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0 [ 36.999323] spi_mem_dirmap_write+0x238/0x32c [ 37.003710] spi_nor_write_data+0x220/0x374 [ 37.007932] spi_nor_write+0x110/0x2e8 [ 37.011711] mtd_write_oob_std+0x154/0x1f0 [ 37.015838] mtd_write_oob+0x104/0x1d0 [ 37.019617] mtd_write+0xb8/0x12c [ 37.022953] mtdchar_write+0x224/0x47c [ 37.026732] vfs_write+0x1e4/0x8c8 [ 37.030163] ksys_write+0xec/0x1d0 [ 37.033586] __arm64_sys_write+0x6c/0x9c [ 37.037539] invoke_syscall+0x6c/0x258 [ 37.041327] el0_svc_common.constprop.0+0x160/0x22c [ 37.046244] do_el0_svc+0x44/0x5c [ 37.049589] el0_svc+0x38/0x78 [ 37.052681] el0t_64_sync_handler+0x13c/0x158 [ 37.057077] el0t_64_sync+0x190/0x194 [ 37.060775] [ 37.062274] Allocated by task 455: [ 37.065701] kasan_save_stack+0x2c/0x54 [ 37.069570] kasan_save_track+0x20/0x3c [ 37.073438] kasan_save_alloc_info+0x40/0x54 [ 37.077736] __kasan_kmalloc+0xa0/0xb8 [ 37.081515] __kmalloc_noprof+0x158/0x2f8 [ 37.085563] mtd_kmalloc_up_to+0x120/0x154 [ 37.089690] mtdchar_write+0x130/0x47c [ 37.093469] vfs_write+0x1e4/0x8c8 [ 37.096901] ksys_write+0xec/0x1d0 [ 37.100332] __arm64_sys_write+0x6c/0x9c [ 37.104287] invoke_syscall+0x6c/0x258 [ 37.108064] el0_svc_common.constprop.0+0x160/0x22c [ 37.112972] do_el0_svc+0x44/0x5c [ 37.116319] el0_svc+0x38/0x78 [ 37.119401] el0t_64_sync_handler+0x13c/0x158 [ 37.123788] el0t_64_sync+0x190/0x194 [ 37.127474] [ 37.128977] The buggy address belongs to the object at ffff00081037c2a0 [ 37.128977] which belongs to the cache kmalloc-8 of size 8 [ 37.141177] The buggy address is located 0 bytes inside of [ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3) [ 37.153465] [ 37.154971] The buggy address belongs to the physical page: [ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c [ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff) [ 37.175149] page_type: 0xfdffffff(slab) [ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000 [ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000 [ 37.194553] page dumped because: kasan: bad access detected [ 37.200144] [ 37.201647] Memory state around the buggy address: [ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc [ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc [ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc [ 37.228186] ^ [ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.246962] ============================================================== ---truncated--- | |||||