Filtered by vendor Netapp
Subscribe
Total
2511 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-26603 | 2 Netapp, Vim | 2 Hci Compute Node, Vim | 2026-06-17 | N/A | 4.2 MEDIUM |
| Vim is a greatly improved version of the good old UNIX editor Vi. Vim allows to redirect screen messages using the `:redir` ex command to register, variables and files. It also allows to show the contents of registers using the `:registers` or `:display` ex command. When redirecting the output of `:display` to a register, Vim will free the register content before storing the new content in the register. Now when redirecting the `:display` command to a register that is being displayed, Vim will free the content while shortly afterwards trying to access it, which leads to a use-after-free. Vim pre 9.1.1115 checks in the ex_display() function, that it does not try to redirect to a register while displaying this register at the same time. However this check is not complete, and so Vim does not check the `+` and `*` registers (which typically donate the X11/clipboard registers, and when a clipboard connection is not possible will fall back to use register 0 instead. In Patch 9.1.1115 Vim will therefore skip outputting to register zero when trying to redirect to the clipboard registers `*` or `+`. Users are advised to upgrade. There are no known workarounds for this vulnerability. | |||||
| CVE-2025-26517 | 1 Netapp | 1 Storagegrid | 2026-06-17 | N/A | 5.4 MEDIUM |
| StorageGRID (formerly StorageGRID Webscale) versions prior to 11.8.0.15 and 11.9.0.8 are susceptible to a privilege escalation vulnerability. Successful exploit could allow an unauthorized authenticated attacker to discover Grid node names and IP addresses or modify Storage Grades. | |||||
| CVE-2025-26516 | 1 Netapp | 1 Storagegrid | 2026-06-17 | N/A | 5.3 MEDIUM |
| StorageGRID (formerly StorageGRID Webscale) versions prior to 11.8.0.15 and 11.9.0.8 are susceptible to a Denial of Service vulnerability. Successful exploit could allow an unauthenticated attacker to cause a Denial of Service on the Admin node. | |||||
| CVE-2025-26515 | 1 Netapp | 1 Storagegrid | 2026-06-17 | N/A | 7.5 HIGH |
| StorageGRID (formerly StorageGRID Webscale) versions prior to 11.8.0.15 and 11.9.0.8 without Single Sign-on enabled are susceptible to a Server-Side Request Forgery (SSRF) vulnerability. Successful exploit could allow an unauthenticated attacker to change the password of any Grid Manager or Tenant Manager non-federated user. | |||||
| CVE-2025-26514 | 1 Netapp | 1 Storagegrid | 2026-06-17 | N/A | 6.4 MEDIUM |
| StorageGRID (formerly StorageGRID Webscale) versions prior to 11.8.0.15 and 11.9.0.8 are susceptible to a Reflected Cross-Site Scripting vulnerability. Successful exploit could allow an attacker to view or modify configuration settings or add or modify user accounts but requires the attacker to know specific information about the target instance and then trick a privileged user into clicking a specially crafted link. | |||||
| CVE-2025-26513 | 1 Netapp | 1 San Host Utilities | 2026-06-17 | N/A | 7.0 HIGH |
| The installer for SAN Host Utilities for Windows versions prior to 8.0 is susceptible to a vulnerability which when successfully exploited could allow a local user to escalate their privileges. | |||||
| CVE-2025-26512 | 1 Netapp | 1 Snapcenter | 2026-06-17 | N/A | 9.9 CRITICAL |
| SnapCenter versions prior to 6.0.1P1 and 6.1P1 are susceptible to a vulnerability which may allow an authenticated SnapCenter Server user to become an admin user on a remote system where a SnapCenter plug-in has been installed. | |||||
| CVE-2025-25292 | 3 Netapp, Omniauth, Onelogin | 3 Storagegrid, Omniauth Saml, Ruby-saml | 2026-06-17 | N/A | 9.8 CRITICAL |
| ruby-saml provides security assertion markup language (SAML) single sign-on (SSO) for Ruby. An authentication bypass vulnerability was found in ruby-saml prior to versions 1.12.4 and 1.18.0 due to a parser differential. ReXML and Nokogiri parse XML differently, the parsers can generate entirely different document structures from the same XML input. That allows an attacker to be able to execute a Signature Wrapping attack. This issue may lead to authentication bypass. Versions 1.12.4 and 1.18.0 contain a patch for the issue. | |||||
| CVE-2025-25291 | 3 Netapp, Omniauth, Onelogin | 3 Storagegrid, Omniauth Saml, Ruby-saml | 2026-06-17 | N/A | 9.8 CRITICAL |
| ruby-saml provides security assertion markup language (SAML) single sign-on (SSO) for Ruby. An authentication bypass vulnerability was found in ruby-saml prior to versions 1.12.4 and 1.18.0 due to a parser differential. ReXML and Nokogiri parse XML differently; the parsers can generate entirely different document structures from the same XML input. That allows an attacker to be able to execute a Signature Wrapping attack. This issue may lead to authentication bypass. Versions 1.12.4 and 1.18.0 fix the issue. | |||||
| CVE-2025-24970 | 2 Netapp, Netty | 3 Active Iq Unified Manager, Oncommand Insight, Netty | 2026-06-17 | N/A | 7.5 HIGH |
| Netty, an asynchronous, event-driven network application framework, has a vulnerability starting in version 4.1.91.Final and prior to version 4.1.118.Final. When a special crafted packet is received via SslHandler it doesn't correctly handle validation of such a packet in all cases which can lead to a native crash. Version 4.1.118.Final contains a patch. As workaround its possible to either disable the usage of the native SSLEngine or change the code manually. | |||||
| CVE-2025-24928 | 2 Netapp, Xmlsoft | 16 Active Iq Unified Manager, H300s, H300s Firmware and 13 more | 2026-06-17 | N/A | 7.8 HIGH |
| libxml2 before 2.12.10 and 2.13.x before 2.13.6 has a stack-based buffer overflow in xmlSnprintfElements in valid.c. To exploit this, DTD validation must occur for an untrusted document or untrusted DTD. NOTE: this is similar to CVE-2017-9047. | |||||
| CVE-2025-24813 | 3 Apache, Debian, Netapp | 4 Tomcat, Debian Linux, Bootstrap Os and 1 more | 2026-06-17 | N/A | 9.8 CRITICAL |
| Path Equivalence: 'file.Name' (Internal Dot) leading to Remote Code Execution and/or Information disclosure and/or malicious content added to uploaded files via write enabled Default Servlet in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.2, from 10.1.0-M1 through 10.1.34, from 9.0.0.M1 through 9.0.98. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. If all of the following were true, a malicious user was able to view security sensitive files and/or inject content into those files: - writes enabled for the default servlet (disabled by default) - support for partial PUT (enabled by default) - a target URL for security sensitive uploads that was a sub-directory of a target URL for public uploads - attacker knowledge of the names of security sensitive files being uploaded - the security sensitive files also being uploaded via partial PUT If all of the following were true, a malicious user was able to perform remote code execution: - writes enabled for the default servlet (disabled by default) - support for partial PUT (enabled by default) - application was using Tomcat's file based session persistence with the default storage location - application included a library that may be leveraged in a deserialization attack Users are recommended to upgrade to version 11.0.3, 10.1.35 or 9.0.99, which fixes the issue. | |||||
| CVE-2025-24014 | 2 Netapp, Vim | 3 Hci Compute Node, Hci Compute Node Firmware, Vim | 2026-06-17 | N/A | 4.2 MEDIUM |
| Vim is an open source, command line text editor. A segmentation fault was found in Vim before 9.1.1043. In silent Ex mode (-s -e), Vim typically doesn't show a screen and just operates silently in batch mode. However, it is still possible to trigger the function that handles the scrolling of a gui version of Vim by feeding some binary characters to Vim. The function that handles the scrolling however may be triggering a redraw, which will access the ScreenLines pointer, even so this variable hasn't been allocated (since there is no screen). This vulnerability is fixed in 9.1.1043. | |||||
| CVE-2025-22134 | 3 Neovim, Netapp, Vim | 4 Neovim, Bootstrap Os, Hci Compute Node and 1 more | 2026-06-17 | N/A | 4.2 MEDIUM |
| When switching to other buffers using the :all command and visual mode still being active, this may cause a heap-buffer overflow, because Vim does not properly end visual mode and therefore may try to access beyond the end of a line in a buffer. In Patch 9.1.1003 Vim will correctly reset the visual mode before opening other windows and buffers and therefore fix this bug. In addition it does verify that it won't try to access a position if the position is greater than the corresponding buffer line. Impact is medium since the user must have switched on visual mode when executing the :all ex command. The Vim project would like to thank github user gandalf4a for reporting this issue. The issue has been fixed as of Vim patch v9.1.1003 | |||||
| CVE-2025-21583 | 2 Netapp, Oracle | 2 Snapcenter, Mysql Server | 2026-06-17 | N/A | 4.9 MEDIUM |
| Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: DDL). Supported versions that are affected are 8.4.0 and 9.0.0. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H). | |||||
| CVE-2025-21502 | 3 Debian, Netapp, Oracle | 12 Debian Linux, Active Iq Unified Manager, Bootstrap Os and 9 more | 2026-06-17 | N/A | 4.8 MEDIUM |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Hotspot). Supported versions that are affected are Oracle Java SE: 8u431-perf, 11.0.25, 17.0.13, 21.0.5, 23.0.1; Oracle GraalVM for JDK: 17.0.13, 21.0.5, 23.0.1; Oracle GraalVM Enterprise Edition: 20.3.16 and 21.3.12. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data as well as unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 4.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N). | |||||
| CVE-2025-21492 | 2 Netapp, Oracle | 4 Active Iq Unified Manager, Oncommand Insight, Oncommand Workflow Automation and 1 more | 2026-06-17 | N/A | 4.9 MEDIUM |
| Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: Optimizer). Supported versions that are affected are 8.0.36 and prior and 8.4.0. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H). | |||||
| CVE-2025-1861 | 2 Netapp, Php | 2 Ontap, Php | 2026-06-17 | N/A | 9.8 CRITICAL |
| In PHP from 8.1.* before 8.1.32, from 8.2.* before 8.2.28, from 8.3.* before 8.3.19, from 8.4.* before 8.4.5, when parsing HTTP redirect in the response to an HTTP request, there is currently limit on the location value size caused by limited size of the location buffer to 1024. However as per RFC9110, the limit is recommended to be 8000. This may lead to incorrect URL truncation and redirecting to a wrong location. | |||||
| CVE-2025-1736 | 2 Netapp, Php | 2 Ontap, Php | 2026-06-17 | N/A | 7.3 HIGH |
| In PHP from 8.1.* before 8.1.32, from 8.2.* before 8.2.28, from 8.3.* before 8.3.19, from 8.4.* before 8.4.5, when user-supplied headers are sent, the insufficient validation of the end-of-line characters may prevent certain headers from being sent or lead to certain headers be misinterpreted. | |||||
| CVE-2025-1734 | 2 Netapp, Php | 2 Ontap, Php | 2026-06-17 | N/A | 5.3 MEDIUM |
| In PHP from 8.1.* before 8.1.32, from 8.2.* before 8.2.28, from 8.3.* before 8.3.19, from 8.4.* before 8.4.5, when receiving headers from HTTP server, the headers missing a colon (:) are treated as valid headers even though they are not. This may confuse applications into accepting invalid headers. | |||||