Total
358423 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-45898 | 2026-05-30 | N/A | 9.8 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix workqueue list corruption by removing work_list The commit e1168f0 ("RDMA/iwcm: Simplify cm_event_handler()") changed the work submission logic to unconditionally call queue_work() with the expectation that queue_work() would have no effect if work was already pending. The problem is that a free list of struct iwcm_work is used (for which struct work_struct is embedded), so each call to queue_work() is basically unique and therefore does indeed queue the work. This causes a problem in the work handler which walks the work_list until it's empty to process entries. This means that a single run of the work handler could process item N+1 and release it back to the free list while the actual workqueue entry is still queued. It could then get reused (INIT_WORK...) and lead to list corruption in the workqueue logic. Fix this by just removing the work_list. The workqueue already does this for us. This fixes the following error that was observed when stress testing with ucmatose on an Intel E830 in iWARP mode: [ 151.465780] list_del corruption. next->prev should be ffff9f0915c69c08, but was ffff9f0a1116be08. (next=ffff9f0a15b11c08) [ 151.466639] ------------[ cut here ]------------ [ 151.466986] kernel BUG at lib/list_debug.c:67! [ 151.467349] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 151.467753] CPU: 14 UID: 0 PID: 2306 Comm: kworker/u64:18 Not tainted 6.19.0-rc4+ #1 PREEMPT(voluntary) [ 151.468466] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 151.469192] Workqueue: 0x0 (iw_cm_wq) [ 151.469478] RIP: 0010:__list_del_entry_valid_or_report+0xf0/0x100 [ 151.469942] Code: c7 58 5f 4c b2 e8 10 50 aa ff 0f 0b 48 89 ef e8 36 57 cb ff 48 8b 55 08 48 89 e9 48 89 de 48 c7 c7 a8 5f 4c b2 e8 f0 4f aa ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 [ 151.471323] RSP: 0000:ffffb15644e7bd68 EFLAGS: 00010046 [ 151.471712] RAX: 000000000000006d RBX: ffff9f0915c69c08 RCX: 0000000000000027 [ 151.472243] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f0a37d9c600 [ 151.472768] RBP: ffff9f0a15b11c08 R08: 0000000000000000 R09: c0000000ffff7fff [ 151.473294] R10: 0000000000000001 R11: ffffb15644e7bba8 R12: ffff9f092339ee68 [ 151.473817] R13: ffff9f0900059c28 R14: ffff9f092339ee78 R15: 0000000000000000 [ 151.474344] FS: 0000000000000000(0000) GS:ffff9f0a847b5000(0000) knlGS:0000000000000000 [ 151.474934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.475362] CR2: 0000559e233a9088 CR3: 000000020296b004 CR4: 0000000000770ef0 [ 151.475895] PKRU: 55555554 [ 151.476118] Call Trace: [ 151.476331] <TASK> [ 151.476497] move_linked_works+0x49/0xa0 [ 151.476792] __pwq_activate_work.isra.46+0x2f/0xa0 [ 151.477151] pwq_dec_nr_in_flight+0x1e0/0x2f0 [ 151.477479] process_scheduled_works+0x1c8/0x410 [ 151.477823] worker_thread+0x125/0x260 [ 151.478108] ? __pfx_worker_thread+0x10/0x10 [ 151.478430] kthread+0xfe/0x240 [ 151.478671] ? __pfx_kthread+0x10/0x10 [ 151.478955] ? __pfx_kthread+0x10/0x10 [ 151.479240] ret_from_fork+0x208/0x270 [ 151.479523] ? __pfx_kthread+0x10/0x10 [ 151.479806] ret_from_fork_asm+0x1a/0x30 [ 151.480103] </TASK> | |||||
| CVE-2026-45894 | 2026-05-30 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down PASID entry The Intel VT-d Scalable Mode PASID table entry consists of 512 bits (64 bytes). When tearing down an entry, the current implementation zeros the entire 64-byte structure immediately using multiple 64-bit writes. Since the IOMMU hardware may fetch these 64 bytes using multiple internal transactions (e.g., four 128-bit bursts), updating or zeroing the entire entry while it is active (P=1) risks a "torn" read. If a hardware fetch occurs simultaneously with the CPU zeroing the entry, the hardware could observe an inconsistent state, leading to unpredictable behavior or spurious faults. Follow the "Guidance to Software for Invalidations" in the VT-d spec (Section 6.5.3.3) by implementing the recommended ownership handshake: 1. Clear only the 'Present' (P) bit of the PASID entry. 2. Use a dma_wmb() to ensure the cleared bit is visible to hardware before proceeding. 3. Execute the required invalidation sequence (PASID cache, IOTLB, and Device-TLB flush) to ensure the hardware has released all cached references. 4. Only after the flushes are complete, zero out the remaining fields of the PASID entry. Also, add a dma_wmb() in pasid_set_present() to ensure that all other fields of the PASID entry are visible to the hardware before the Present bit is set. | |||||
| CVE-2026-45892 | 2026-05-30 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ext4: drop extent cache after doing PARTIAL_VALID1 zeroout When splitting an unwritten extent in the middle and converting it to initialized in ext4_split_extent() with the EXT4_EXT_MAY_ZEROOUT and EXT4_EXT_DATA_VALID2 flags set, it could leave a stale unwritten extent. Assume we have an unwritten file and buffered write in the middle of it without dioread_nolock enabled, it will allocate blocks as written extent. 0 A B N [UUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUU] extent status tree [--DDDDDDDD--] D: valid data |<- ->| ----> this range needs to be initialized ext4_split_extent() first try to split this extent at B with EXT4_EXT_DATA_PARTIAL_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but ext4_split_extent_at() failed to split this extent due to temporary lack of space. It zeroout B to N and leave the entire extent as unwritten. 0 A B N [UUUUUUUUUUUU] on-disk extent [UUUUUUUUUUUU] extent status tree [--DDDDDDDDZZ] Z: zeroed data ext4_split_extent() then try to split this extent at A with EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and leave an written extent from A to N. 0 A B N [UUWWWWWWWWWW] on-disk extent W: written extent [UUUUUUUUUUUU] extent status tree [--DDDDDDDDZZ] Finally ext4_map_create_blocks() only insert extent A to B to the extent status tree, and leave an stale unwritten extent in the status tree. 0 A B N [UUWWWWWWWWWW] on-disk extent W: written extent [UUWWWWWWWWUU] extent status tree [--DDDDDDDDZZ] Fix this issue by always cached extent status entry after zeroing out the second part. | |||||
| CVE-2026-45878 | 2026-05-30 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 The address watch clear code receives watch_id as an unsigned value (u32), but some helper functions were using a signed int and checked bits by shifting with watch_id. If a very large watch_id is passed from userspace, it can be converted to a negative value. This can cause invalid shifts and may access memory outside the watch_points array. drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before using it. Also use BIT(watch_id) to test and clear bits safely. This keeps the behavior unchanged for valid watch IDs and avoids undefined behavior for invalid ones. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448 kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow 'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c 433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd, 434 uint32_t watch_id) 435 { 436 int r; 437 438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id)) kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if watch_id is larger than INT_MAX it leads to a buffer overflow. (Negative shifts are undefined). 439 return -EINVAL; 440 441 if (!pdd->dev->kfd->shared_resources.enable_mes) { 442 r = debug_lock_and_unmap(pdd->dev->dqm); 443 if (r) 444 return r; 445 } 446 447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false); --> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch( 449 pdd->dev->adev, 450 watch_id); v2: (as per, Jonathan Kim) - Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to match the clear path. - Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id(). | |||||
| CVE-2026-45862 | 2026-05-30 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush cache for PASID table before using it When writing the address of a freshly allocated zero-initialized PASID table to a PASID directory entry, do that after the CPU cache flush for this PASID table, not before it, to avoid the time window when this PASID table may be already used by non-coherent IOMMU hardware while its contents in RAM is still some random old data, not zero-initialized. | |||||
| CVE-2026-45861 | 2026-05-30 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in qd_put Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously") started freeing quota data objects during filesystem shutdown instead of putting them back onto the LRU list, but it failed to remove these objects from the LRU list, causing LRU list corruption. This caused use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access already-freed objects on the LRU list. Fix this by removing qd objects from the LRU list before freeing them in qd_put(). Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>. | |||||
| CVE-2026-45860 | 2026-05-30 | N/A | 7.5 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: increase the connection clean up limit to 64 After the optimization to only perform one GC per jiffy, a new problem was introduced. If more than 8 new connections are tracked per jiffy the list won't be cleaned up fast enough possibly reaching the limit wrongly. In order to prevent this issue, only skip the GC if it was already triggered during the same jiffy and the increment is lower than the clean up limit. In addition, increase the clean up limit to 64 connections to avoid triggering GC too often and do more effective GCs. This has been tested using a HTTP server and several performance tools while having nft_connlimit/xt_connlimit or OVS limit configured. Output of slowhttptest + OVS limit at 52000 connections: slow HTTP test status on 340th second: initializing: 0 pending: 432 connected: 51998 error: 0 closed: 0 service available: YES | |||||
| CVE-2026-45859 | 2026-05-30 | N/A | 7.5 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: do shared-unconfirmed check before segmentation Ulrich reports a regression with nfqueue: If an application did not set the 'F_GSO' capability flag and a gso packet with an unconfirmed nf_conn entry is received all packets are now dropped instead of queued, because the check happens after skb_gso_segment(). In that case, we did have exclusive ownership of the skb and its associated conntrack entry. The elevated use count is due to skb_clone happening via skb_gso_segment(). Move the check so that its peformed vs. the aggregated packet. Then, annotate the individual segments except the first one so we can do a 2nd check at reinject time. For the normal case, where userspace does in-order reinjects, this avoids packet drops: first reinjected segment continues traversal and confirms entry, remaining segments observe the confirmed entry. While at it, simplify nf_ct_drop_unconfirmed(): We only care about unconfirmed entries with a refcnt > 1, there is no need to special-case dying entries. This only happens with UDP. With TCP, the only unconfirmed packet will be the TCP SYN, those aren't aggregated by GRO. Next patch adds a udpgro test case to cover this scenario. | |||||
| CVE-2026-45856 | 2026-05-30 | N/A | 7.1 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to userspace. Additionally, providing an excessively large wqe_size can trigger a WARNING in the memory allocation path, as reported by syzkaller. This is inconsistent with ib_uverbs_unmarshall_recv() which properly validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before proceeding. Add the same validation for ib_uverbs_post_send() to ensure wqe_size is at least sizeof(struct ib_uverbs_send_wr). | |||||
| CVE-2026-45852 | 2026-05-30 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix double free in rxe_srq_from_init In rxe_srq_from_init(), the queue pointer 'q' is assigned to 'srq->rq.queue' before copying the SRQ number to user space. If copy_to_user() fails, the function calls rxe_queue_cleanup() to free the queue, but leaves the now-invalid pointer in 'srq->rq.queue'. The caller of rxe_srq_from_init() (rxe_create_srq) eventually calls rxe_srq_cleanup() upon receiving the error, which triggers a second rxe_queue_cleanup() on the same memory, leading to a double free. The call trace looks like this: kmem_cache_free+0x.../0x... rxe_queue_cleanup+0x1a/0x30 [rdma_rxe] rxe_srq_cleanup+0x42/0x60 [rdma_rxe] rxe_elem_release+0x31/0x70 [rdma_rxe] rxe_create_srq+0x12b/0x1a0 [rdma_rxe] ib_create_srq_user+0x9a/0x150 [ib_core] Fix this by moving 'srq->rq.queue = q' after copy_to_user. | |||||
| CVE-2026-43503 | 2026-05-30 | N/A | 8.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list(). The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker. | |||||
| CVE-2026-43498 | 2026-05-30 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Disallow re-exporting imported GEM objects Prevent re-exporting of imported GEM buffers by adding a custom prime_handle_to_fd callback that checks if the object is imported and returns -EOPNOTSUPP if so. Re-exporting imported GEM buffers causes loss of buffer flags settings, leading to incorrect device access and data corruption. | |||||
| CVE-2026-43495 | 2026-05-30 | N/A | 8.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: validate port_count against message length in t7xx_port_enum_msg_handler t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as a loop bound over port_msg->data[] without checking that the message buffer contains sufficient data. A modem sending port_count=65535 in a 12-byte buffer triggers a slab-out-of-bounds read of up to 262140 bytes. Add a sizeof(*port_msg) check before accessing the port message header fields to guard against undersized messages. Add a struct_size() check after extracting port_count and before the loop. In t7xx_parse_host_rt_data(), guard the rt_feature header read with a remaining-buffer check before accessing data_len, validate feat_data_len against the actual remaining buffer to prevent OOB reads and signed integer overflow on offset. Pass msg_len from both call sites: skb->len at the DPMAIF path after skb_pull(), and the validated feat_data_len at the handshake path. | |||||
| CVE-2026-48116 | 1 Mintplexlabs | 1 Anythingllm | 2026-05-30 | N/A | 7.5 HIGH |
| AnythingLLM is an application that turns pieces of content into context that any LLM can use as references during chatting. Prior to 1.13.0, the filesystem-search-files agent skill passes its LLM-controlled pattern parameter to ripgrep as a positional argument without a -- end-of-options separator. ripgrep parses any argument that starts with - as an option, so a pattern of --pre=/bin/sh turns ripgrep into a script executor: it runs /bin/sh <file> for every file it walks. An attacker who can chat with an agent on a deployment with the filesystem plugin enabled (the default in the official Docker image) can use this, together with the sibling filesystem-write-text-file skill, to run arbitrary commands inside the AnythingLLM server container. This vulnerability is fixed in 1.13.0. | |||||
| CVE-2026-45374 | 2026-05-30 | N/A | 9.6 CRITICAL | ||
| CodeWhale is a DeepSeek + MiMo coding agent in terminal. Prior to 0.8.26, the task_create tool spawns durable sub-agents that inherit two insecure defaults, allow_shell defaults to true (config.rs:1499: self.allow_shell.unwrap_or(true)) and auto_approve defaults to true (task_manager.rs:297: auto_approve: Some(true)). When a user approves a task_create call (which requires ApprovalRequirement::Required), they approve what appears to be a benign work prompt. However, the spawned sub-agent silently receives unrestricted, unapproved shell access. This vulnerability is fixed in 0.8.26. | |||||
| CVE-2026-45373 | 2026-05-30 | N/A | 7.4 HIGH | ||
| CodeWhale is a DeepSeek + MiMo coding agent in terminal. Prior to 0.8.26, although SSRF is validated against hostnames that resolve to private IPv6 addresses, when providing the IPV6 in URL as http://[::1], the SSRF defenses do not work. This vulnerability is fixed in 0.8.26. | |||||
| CVE-2026-45343 | 2026-05-30 | N/A | N/A | ||
| LinkAce is a self-hosted archive to collect website links. Prior to 2.5.6, LinkAce contains a stored cross-site scripting vulnerability that allows a low-privilege user to execute arbitrary JavaScript in an administrator's browser session. This affects instances configured with SSO/OAuth authentication, which is one of the supported authentication methods in LinkAce. An attacker who sets their OAuth display name to a malicious script and then creates an API token will plant a persistent XSS payload in the audit log. When any admin navigates to /system/audit, the payload executes in the admin's browser context. This enables session cookie theft, CSRF token exfiltration (exposed in the la-app-data meta tag), or any other action the admin can perform. This vulnerability is fixed in 2.5.6. | |||||
| CVE-2026-45310 | 2026-05-30 | N/A | 7.4 HIGH | ||
| CodeWhale is a DeepSeek + MiMo coding agent in terminal. Prior to 0.8.22, the fetch_url tool validates the initial URL's resolved IP address against a restricted-IP blocklist (is_restricted_ip()) to prevent SSRF attacks against internal services (cloud metadata endpoints, localhost, private networks). However, the HTTP client (reqwest) is configured to automatically follow up to 5 redirects (reqwest::redirect::Policy::limited(5)) without re-validating the redirect target against the same SSRF protections. This vulnerability is fixed in 0.8.22. | |||||
| CVE-2026-46402 | 2026-05-30 | N/A | 8.1 HIGH | ||
| Microsoft UFO open-source framework for intelligent automation across devices and platforms. In 3.0.1-4-ge2626659, Microsoft UFO uses the user-controlled task_name value directly when constructing session log paths. An authenticated client can supply path traversal sequences in task_name and cause UFO to create log directories and log files outside the intended logs/ directory. | |||||
| CVE-2026-35671 | 2026-05-30 | N/A | 8.8 HIGH | ||
| phpMyFAQ before 4.1.3 contains an insecure direct object reference vulnerability in the admin API user password endpoint that allows authenticated administrators to change any user's password without authorization verification. An attacker with low-privilege admin credentials can escalate to SuperAdmin by modifying the userId parameter in the overwrite-password API request. | |||||