Filtered by vendor Linux
Subscribe
Total
18847 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-23456 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 8.2 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: fix OOB read in decode_int() CONS case In decode_int(), the CONS case calls get_bits(bs, 2) to read a length value, then calls get_uint(bs, len) without checking that len bytes remain in the buffer. The existing boundary check only validates the 2 bits for get_bits(), not the subsequent 1-4 bytes that get_uint() reads. This allows a malformed H.323/RAS packet to cause a 1-4 byte slab-out-of-bounds read. Add a boundary check for len bytes after get_bits() and before get_uint(). | |||||
| CVE-2026-23455 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 9.1 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: check for zero length in DecodeQ931() In DecodeQ931(), the UserUserIE code path reads a 16-bit length from the packet, then decrements it by 1 to skip the protocol discriminator byte before passing it to DecodeH323_UserInformation(). If the encoded length is 0, the decrement wraps to -1, which is then passed as a large value to the decoder, leading to an out-of-bounds read. Add a check to ensure len is positive after the decrement. | |||||
| CVE-2026-23429 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iommu/sva: Fix crash in iommu_sva_unbind_device() domain->mm->iommu_mm can be freed by iommu_domain_free(): iommu_domain_free() mmdrop() __mmdrop() mm_pasid_drop() After iommu_domain_free() returns, accessing domain->mm->iommu_mm may dereference a freed mm structure, leading to a crash. Fix this by moving the code that accesses domain->mm->iommu_mm to before the call to iommu_domain_free(). | |||||
| CVE-2026-23447 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: cdc_ncm: add ndpoffset to NDP32 nframes bounds check The same bounds-check bug fixed for NDP16 in the previous patch also exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated against the total skb length without accounting for ndpoffset, allowing out-of-bounds reads when the NDP32 is placed near the end of the NTB. Add ndpoffset to the nframes bounds check and use struct_size_t() to express the NDP-plus-DPE-array size more clearly. Compile-tested only. | |||||
| CVE-2026-23451 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bonding: prevent potential infinite loop in bond_header_parse() bond_header_parse() can loop if a stack of two bonding devices is setup, because skb->dev always points to the hierarchy top. Add new "const struct net_device *dev" parameter to (struct header_ops)->parse() method to make sure the recursion is bounded, and that the final leaf parse method is called. | |||||
| CVE-2026-23452 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PM: runtime: Fix a race condition related to device removal The following code in pm_runtime_work() may dereference the dev->parent pointer after the parent device has been freed: /* Maybe the parent is now able to suspend. */ if (parent && !parent->power.ignore_children) { spin_unlock(&dev->power.lock); spin_lock(&parent->power.lock); rpm_idle(parent, RPM_ASYNC); spin_unlock(&parent->power.lock); spin_lock(&dev->power.lock); } Fix this by inserting a flush_work() call in pm_runtime_remove(). Without this patch blktest block/001 triggers the following complaint sporadically: BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160 Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081 Workqueue: pm pm_runtime_work Call Trace: <TASK> dump_stack_lvl+0x61/0x80 print_address_description.constprop.0+0x8b/0x310 print_report+0xfd/0x1d7 kasan_report+0xd8/0x1d0 __kasan_check_byte+0x42/0x60 lock_acquire.part.0+0x38/0x230 lock_acquire+0x70/0x160 _raw_spin_lock+0x36/0x50 rpm_suspend+0xc6a/0xfe0 rpm_idle+0x578/0x770 pm_runtime_work+0xee/0x120 process_one_work+0xde3/0x1410 worker_thread+0x5eb/0xfe0 kthread+0x37b/0x480 ret_from_fork+0x6cb/0x920 ret_from_fork_asm+0x11/0x20 </TASK> Allocated by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_alloc_info+0x3d/0x50 __kasan_kmalloc+0xa0/0xb0 __kmalloc_noprof+0x311/0x990 scsi_alloc_target+0x122/0xb60 [scsi_mod] __scsi_scan_target+0x101/0x460 [scsi_mod] scsi_scan_channel+0x179/0x1c0 [scsi_mod] scsi_scan_host_selected+0x259/0x2d0 [scsi_mod] store_scan+0x2d2/0x390 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810 do_syscall_64+0xee/0xfc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_free_info+0x3f/0x50 __kasan_slab_free+0x67/0x80 kfree+0x225/0x6c0 scsi_target_dev_release+0x3d/0x60 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_dev_release+0xacf/0x12c0 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_put+0x7f/0xc0 [scsi_mod] sdev_store_delete+0xa5/0x120 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810 | |||||
| CVE-2026-23442 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: add NULL checks for idev in SRv6 paths __in6_dev_get() can return NULL when the device has no IPv6 configuration (e.g. MTU < IPV6_MIN_MTU or after NETDEV_UNREGISTER). Add NULL checks for idev returned by __in6_dev_get() in both seg6_hmac_validate_skb() and ipv6_srh_rcv() to prevent potential NULL pointer dereferences. | |||||
| CVE-2026-35558 | 4 Amazon, Apple, Linux and 1 more | 4 Athena Odbc, Macos, Linux Kernel and 1 more | 2026-07-24 | N/A | 7.8 HIGH |
| Improper neutralization of special elements in the authentication components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to execute arbitrary code or redirect authentication flows by using specially crafted connection parameters that are processed by the driver during user-initiated authentication. To remediate this issue, users should upgrade to version 2.1.0.0. | |||||
| CVE-2026-23422 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: Fix interrupt storm after receiving bad if_id in IRQ handler Commit 31a7a0bbeb00 ("dpaa2-switch: add bounds check for if_id in IRQ handler") introduces a range check for if_id to avoid an out-of-bounds access. If an out-of-bounds if_id is detected, the interrupt status is not cleared. This may result in an interrupt storm. Clear the interrupt status after detecting an out-of-bounds if_id to avoid the problem. Found by an experimental AI code review agent at Google. | |||||
| CVE-2026-23432 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mshv: Fix use-after-free in mshv_map_user_memory error path In the error path of mshv_map_user_memory(), calling vfree() directly on the region leaves the MMU notifier registered. When userspace later unmaps the memory, the notifier fires and accesses the freed region, causing a use-after-free and potential kernel panic. Replace vfree() with mshv_partition_put() to properly unregister the MMU notifier before freeing the region. | |||||
| CVE-2026-23436 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: shaper: protect from late creation of hierarchy We look up a netdev during prep of Netlink ops (pre- callbacks) and take a ref to it. Then later in the body of the callback we take its lock or RCU which are the actual protections. The netdev may get unregistered in between the time we take the ref and the time we lock it. We may allocate the hierarchy after flush has already run, which would lead to a leak. Take the instance lock in pre- already, this saves us from the race and removes the need for dedicated lock/unlock callbacks completely. After all, if there's any chance of write happening concurrently with the flush - we're back to leaking the hierarchy. We may take the lock for devices which don't support shapers but we're only dealing with SET operations here, not taking the lock would be optimizing for an error case. | |||||
| CVE-2026-23443 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Fix previous acpi_processor_errata_piix4() fix After commi f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()"), device pointers may be dereferenced after dropping references to the device objects pointed to by them, which may cause a use-after-free to occur. Moreover, debug messages about enabling the errata may be printed if the errata flags corresponding to them are unset. Address all of these issues by moving message printing to the points in the code where the errata flags are set. | |||||
| CVE-2026-23448 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE entries fit within the skb. The first check correctly accounts for ndpoffset: if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len) but the second check omits it: if ((sizeof(struct usb_cdc_ncm_ndp16) + ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len) This validates the DPE array size against the total skb length as if the NDP were at offset 0, rather than at ndpoffset. When the NDP is placed near the end of the NTB (large wNdpIndex), the DPE entries can extend past the skb data buffer even though the check passes. cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating the DPE array. Add ndpoffset to the nframes bounds check and use struct_size_t() to express the NDP-plus-DPE-array size more clearly. | |||||
| CVE-2026-35561 | 4 Amazon, Apple, Linux and 1 more | 4 Athena Odbc, Macos, Linux Kernel and 1 more | 2026-07-24 | N/A | 7.4 HIGH |
| Insufficient authentication security controls in the browser-based authentication components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to intercept or hijack authentication sessions due to insufficient protections in the browser-based authentication flows. To remediate this issue, users should upgrade to version 2.1.0.0. | |||||
| CVE-2026-23430 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Don't overwrite KMS surface dirty tracker We were overwriting the surface's dirty tracker here causing a memory leak. | |||||
| CVE-2026-39860 | 2 Linux, Nixos | 2 Linux Kernel, Nix | 2026-07-24 | N/A | 9.0 CRITICAL |
| Nix is a package manager for Linux and other Unix systems. A bug in the fix for CVE-2024-27297 allowed for arbitrary overwrites of files writable by the Nix process orchestrating the builds (typically the Nix daemon running as root in multi-user installations) by following symlinks during fixed-output derivation output registration. This affects sandboxed Linux builds - sandboxed macOS builds are unaffected. The location of the temporary output used for the output copy was located inside the build chroot. A symlink, pointing to an arbitrary location in the filesystem, could be created by the derivation builder at that path. During output registration, the Nix process (running in the host mount namespace) would follow that symlink and overwrite the destination with the derivation's output contents. In multi-user installations, this allows all users able to submit builds to the Nix daemon (allowed-users - defaulting to all users) to gain root privileges by modifying sensitive files. This vulnerability is fixed in 2.34.5, 2.33.4, 2.32.7, 2.31.4, 2.30.4, 2.29.3, and 2.28.6. | |||||
| CVE-2026-35559 | 4 Amazon, Apple, Linux and 1 more | 4 Athena Odbc, Macos, Linux Kernel and 1 more | 2026-07-24 | N/A | 6.5 MEDIUM |
| Out-of-bounds write in the query processing components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to crash the driver by using specially crafted data that is processed by the driver during query operations. To remediate this issue, users should upgrade to version 2.1.0.0. | |||||
| CVE-2026-23433 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Fix null pointer dereference when restoring bandwidth counters When an MSC supporting memory bandwidth monitoring is brought offline and then online, mpam_restore_mbwu_state() calls __ris_msmon_read() via ipi to restore the configuration of the bandwidth counters. It doesn't care about the value read, mbwu_arg.val, and doesn't set it leading to a null pointer dereference when __ris_msmon_read() adds to it. This results in a kernel oops with a call trace such as: Call trace: __ris_msmon_read+0x19c/0x64c (P) mpam_restore_mbwu_state+0xa0/0xe8 smp_call_on_cpu_callback+0x1c/0x38 process_one_work+0x154/0x4b4 worker_thread+0x188/0x310 kthread+0x11c/0x130 ret_from_fork+0x10/0x20 Provide a local variable for val to avoid __ris_msmon_read() dereferencing a null pointer when adding to val. | |||||
| CVE-2026-23440 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix race condition during IPSec ESN update In IPSec full offload mode, the device reports an ESN (Extended Sequence Number) wrap event to the driver. The driver validates this event by querying the IPSec ASO and checking that the esn_event_arm field is 0x0, which indicates an event has occurred. After handling the event, the driver must re-arm the context by setting esn_event_arm back to 0x1. A race condition exists in this handling path. After validating the event, the driver calls mlx5_accel_esp_modify_xfrm() to update the kernel's xfrm state. This function temporarily releases and re-acquires the xfrm state lock. So, need to acknowledge the event first by setting esn_event_arm to 0x1. This prevents the driver from reprocessing the same ESN update if the hardware sends events for other reason. Since the next ESN update only occurs after nearly 2^31 packets are received, there's no risk of missing an update, as it will happen long after this handling has finished. Processing the event twice causes the ESN high-order bits (esn_msb) to be incremented incorrectly. The driver then programs the hardware with this invalid ESN state, which leads to anti-replay failures and a complete halt of IPSec traffic. Fix this by re-arming the ESN event immediately after it is validated, before calling mlx5_accel_esp_modify_xfrm(). This ensures that any spurious, duplicate events are correctly ignored, closing the race window. | |||||
| CVE-2026-23420 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: Fix a locking bug Make sure that wl->mutex is locked before it is unlocked. This has been detected by the Clang thread-safety analyzer. | |||||