Total
18784 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-46119 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 9.1 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix slab-out-of-bounds access in auth message processing If a (potentially corrupted) message of type CEPH_MSG_AUTH_REPLY contains a positive value in its result field, it is treated as an error code by ceph_handle_auth_reply() and returned to handle_auth_reply(). Thereafter, an attempt is made to send the preallocated message of type CEPH_MSG_AUTH, where the returned value is interpreted as the size of the front segment to send. If the result value in the message is greater than the size of the memory buffer allocated for the front segment, an out-of-bounds access occurs, and the content of the memory region beyond this buffer is sent out. This patch fixes the issue by treating only negative values in the result field as errors. Positive values are therefore treated as success in the same way as a zero value. Additionally, a BUG_ON is added to __send_prepared_auth_request() comparing the len parameter to front_alloc_len to prevent sending the message if it exceeds the bounds of the allocation and to make it easier to catch any logic flaws leading to this. | |||||
| CVE-2026-46120 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ip6_gre: Use cached t->net in ip6erspan_changelink(). After commit 5e72ce3e3980 ("net: ipv6: Use link netns in newlink() of rtnl_link_ops"), ip6erspan_newlink() correctly resolves the per-netns ip6gre hash via link_net. ip6erspan_changelink() was not converted in that series and still uses dev_net(dev), which diverges from the device's creation netns after IFLA_NET_NS_FD migration. This re-inserts the tunnel into the wrong per-netns hash. The original netns keeps a stale entry. When that netns is later destroyed, ip6gre_exit_rtnl_net() walks the stale entry, producing a slab-use-after-free reported by KASAN, followed by a kernel BUG at net/core/dev.c (LIST_POISON1) in unregister_netdevice_many_notify(). Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). ip6gre_changelink() earlier in the same file already uses the cached t->net; only ip6erspan_changelink() has the wrong shape. | |||||
| CVE-2026-46121 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path". Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race with their writes, results in use-after-free. Fix those. This patch (of 2): damon_sysfs_scheme_filter->mmecg_path can be read and written by users, via DAMON sysfs memcg_path file. It can also be indirectly read, for the parameters {on,off}line committing to DAMON. The reads for parameters committing are protected by damon_sysfs_lock to avoid the sysfs files being destroyed while any of the parameters are being read. But the user-driven direct reads and writes are not protected by any lock, while the write is deallocating the memcg_path-pointing buffer. As a result, the readers could read the already freed buffer (user-after-free). Note that the user-reads don't race when the same open file is used by the writer, due to kernfs's open file locking. Nonetheless, doing the reads and writes with separate open files would be common. Fix it by protecting both the user-direct reads and writes with damon_sysfs_lock. | |||||
| CVE-2026-46122 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: b43: enforce bounds check on firmware key index in b43_rx() The firmware-controlled key index in b43_rx() can exceed the dev->key[] array size (58 entries). The existing B43_WARN_ON is non-enforcing in production builds, allowing an out-of-bounds read. Make the B43_WARN_ON check enforcing by dropping the frame when the firmware returns an invalid key index. | |||||
| CVE-2026-46123 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.7 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: clamp rx length before skb_put virtbt_rx_work() calls skb_put(skb, len) where len comes directly from virtqueue_get_buf() with no validation against the buffer we posted to the device. The RX skb is allocated in virtbt_add_inbuf() and exposed to virtio as exactly 1000 bytes via sg_init_one(). Checking len against skb_tailroom(skb) is not sufficient because alloc_skb() can leave more tailroom than the 1000 bytes actually handed to the device. A malicious or buggy backend can therefore report used.len between 1001 and skb_tailroom(skb), causing skb_put() to include uninitialized kernel heap bytes that were never written by the device. The same path also accepts len == 0, in which case skb_put(skb, 0) leaves the skb empty but virtbt_rx_handle() still reads the pkt_type byte from skb->data, consuming uninitialized memory. Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and sg_init_one(), and gate virtbt_rx_work() on that same constant so the bound checked matches the buffer actually exposed to the device. Reject used.len == 0 in the same gate so an empty completion can no longer reach virtbt_rx_handle(). Use bt_dev_err_ratelimited() because the length value comes from an untrusted backend that can otherwise flood the kernel log. Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer overflow in USB transport layer"), which hardened the USB 9p transport against unchecked device-reported length. | |||||
| CVE-2026-46124 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: isofs: validate block number from NFS file handle in isofs_export_iget isofs_fh_to_dentry() and isofs_fh_to_parent() pass an attacker- controlled block number (ifid->block or ifid->parent_block) from the NFS file handle to isofs_export_iget(), which only rejects block == 0 before calling isofs_iget() and ultimately sb_bread(). A crafted file handle with fh_len sufficient to pass the check added by commit 0405d4b63d08 ("isofs: Prevent the use of too small fid") can still drive the server to read any in-range block on the backing device as if it were an iso_directory_record. That earlier fix was assigned CVE-2025-37780. sb_bread() on an out-of-range block returns NULL cleanly via the EIO path, so there is no memory-safety violation. For in-range reads of adjacent-partition data on the same block device, the unrelated bytes end up in iso_inode_info fields that reach the NFS client as dentry metadata. The deployment surface (isofs exported over NFS from loop-mounted images) is narrow and requires an authenticated NFS peer, but the malformed-file-handle class is reportable as hardening next to the existing CVE-2025-37780 fix. Reject block >= ISOFS_SB(sb)->s_nzones in isofs_export_iget() so the check covers both isofs_fh_to_dentry() and isofs_fh_to_parent() call sites with a single line. | |||||
| CVE-2026-46126 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Fix mana_destroy_wq_obj() cleanup in mana_ib_create_qp_rss() Sashiko points out there are two bugs here in the error unwind flow, both related to how the WQ table is unwound. First there is a double i-- on the first failure path due to the while loop having a i--, remove it. Second if mana_ib_install_cq_cb() fails then mana_create_wq_obj() is not undone due to the above i--. | |||||
| CVE-2026-46127 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ocrdma: Don't NULL deref uctx on errors in ocrdma_copy_pd_uresp() Sashiko points out that pd->uctx isn't initialized until late in the function so all these error flow references are NULL and will crash. Use the uctx that isn't NULL. | |||||
| CVE-2026-46128 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: Check event message buffer response for bad data The event message buffer response data size got checked later when processing, but check it right after the response comes back. It appears some BMCs may return an empty message instead of an error when fetching events. There are apparently some new BMCs that make this error, so we need to compensate. | |||||
| CVE-2026-45900 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix netdev memory leak in dpaa2_caam_probe When commit 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure in dpaa2") converted embedded net_device to dynamically allocated pointers, it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in dpaa2_dpseci_free() for error paths. This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe due to DPIO devices not being ready yet. The kernel's deferred probe mechanism handles the retry successfully, but the netdevs allocated during the failed probe attempt are never freed, resulting in kmemleak reports showing multiple leaked netdev-related allocations all traced back to dpaa2_caam_probe(). Fix this by preserving the CPU mask of allocated netdevs during setup and using it for cleanup in dpaa2_dpseci_free(). This approach ensures that only the CPUs that actually had netdevs allocated will be cleaned up, avoiding potential issues with CPU hotplug scenarios. | |||||
| CVE-2026-45902 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: bq256xx: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle. | |||||
| CVE-2026-45903 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix memory access flags in helper prototypes After commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking"), the verifier started relying on the access type flags in helper function prototypes to perform memory access optimizations. Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the verifier to incorrectly assume that the buffer contents are unchanged across the helper call. Consequently, the verifier may optimize away subsequent reads based on this wrong assumption, leading to correctness issues. For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM which correctly indicates write access to potentially uninitialized memory. Similar issues were recently addressed for specific helpers in commit ac44dcc788b9 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer") and commit 2eb7648558a7 ("bpf: Specify access type of bpf_sysctl_get_name args"). Fix these prototypes by adding the correct memory access flags. | |||||
| CVE-2026-45904 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling The recent commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug safe") restructured the EEH driver to improve synchronization with the PCI hotplug layer. However, it inadvertently moved pci_lock_rescan_remove() outside its intended scope in eeh_handle_normal_event(), leading to broken PCI error reporting and improper EEH event triggering. Specifically, eeh_handle_normal_event() acquired pci_lock_rescan_remove() before calling eeh_pe_bus_get(), but eeh_pe_bus_get() itself attempts to acquire the same lock internally, causing nested locking and disrupting normal EEH event handling paths. This patch adds a boolean parameter do_lock to _eeh_pe_bus_get(), with two public wrappers: eeh_pe_bus_get() with locking enabled. eeh_pe_bus_get_nolock() that skips locking. Callers that already hold pci_lock_rescan_remove() now use eeh_pe_bus_get_nolock() to avoid recursive lock acquisition. Additionally, pci_lock_rescan_remove() calls are restored to the correct position—after eeh_pe_bus_get() and immediately before iterating affected PEs and devices. This ensures EEH-triggered PCI removes occur under proper bus rescan locking without recursive lock contention. The eeh_pe_loc_get() function has been split into two functions: eeh_pe_loc_get(struct eeh_pe *pe) which retrieves the loc for given PE. eeh_pe_loc_get_bus(struct pci_bus *bus) which retrieves the location code for given bus. This resolves lockdep warnings such as: <snip> [ 84.964298] [ T928] ============================================ [ 84.964304] [ T928] WARNING: possible recursive locking detected [ 84.964311] [ T928] 6.18.0-rc3 #51 Not tainted [ 84.964315] [ T928] -------------------------------------------- [ 84.964320] [ T928] eehd/928 is trying to acquire lock: [ 84.964324] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40 [ 84.964342] [ T928] but task is already holding lock: [ 84.964347] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40 [ 84.964357] [ T928] other info that might help us debug this: [ 84.964363] [ T928] Possible unsafe locking scenario: [ 84.964367] [ T928] CPU0 [ 84.964370] [ T928] ---- [ 84.964373] [ T928] lock(pci_rescan_remove_lock); [ 84.964378] [ T928] lock(pci_rescan_remove_lock); [ 84.964383] [ T928] *** DEADLOCK *** [ 84.964388] [ T928] May be due to missing lock nesting notation [ 84.964393] [ T928] 1 lock held by eehd/928: [ 84.964397] [ T928] #0: c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40 [ 84.964408] [ T928] stack backtrace: [ 84.964414] [ T928] CPU: 2 UID: 0 PID: 928 Comm: eehd Not tainted 6.18.0-rc3 #51 VOLUNTARY [ 84.964417] [ T928] Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_022) hv:phyp pSeries [ 84.964419] [ T928] Call Trace: [ 84.964420] [ T928] [c0000011a7157990] [c000000001705de4] dump_stack_lvl+0xc8/0x130 (unreliable) [ 84.964424] [ T928] [c0000011a71579d0] [c0000000002f66e0] print_deadlock_bug+0x430/0x440 [ 84.964428] [ T928] [c0000011a7157a70] [c0000000002fd0c0] __lock_acquire+0x1530/0x2d80 [ 84.964431] [ T928] [c0000011a7157ba0] [c0000000002fea54] lock_acquire+0x144/0x410 [ 84.964433] [ T928] [c0000011a7157cb0] [c0000011a7157cb0] __mutex_lock+0xf4/0x1050 [ 84.964436] [ T928] [c0000011a7157e00] [c000000000de21d8] pci_lock_rescan_remove+0x28/0x40 [ 84.964439] [ T928] [c0000011a7157e20] [c00000000004ed98] eeh_pe_bus_get+0x48/0xc0 [ 84.964442] [ T928] [c0000011a7157e50] [c00000 ---truncated--- | |||||
| CVE-2026-45905 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path icmp_route_lookup() performs multiple route lookups to find a suitable route for sending ICMP error messages, with special handling for XFRM (IPsec) policies. The lookup sequence is: 1. First, lookup output route for ICMP reply (dst = original src) 2. Pass through xfrm_lookup() for policy check 3. If blocked (-EPERM) or dst is not local, enter "reverse path" 4. In reverse path, call xfrm_decode_session_reverse() to get fl4_dec which reverses the original packet's flow (saddr<->daddr swapped) 5. If fl4_dec.saddr is local (we are the original destination), use __ip_route_output_key() for output route lookup 6. If fl4_dec.saddr is NOT local (we are a forwarding node), use ip_route_input() to simulate the reverse packet's input path 7. Finally, pass rt2 through xfrm_lookup() with XFRM_LOOKUP_ICMP flag The bug occurs in step 6: ip_route_input() is called with fl4_dec.daddr (original packet's source) as destination. If this address becomes local between the initial check and ip_route_input() call (e.g., due to concurrent "ip addr add"), ip_route_input() returns a LOCAL route with dst.output set to ip_rt_bug. This route is then used for ICMP output, causing dst_output() to call ip_rt_bug(), triggering a WARN_ON: ------------[ cut here ]------------ WARNING: net/ipv4/route.c:1275 at ip_rt_bug+0x21/0x30, CPU#1 Call Trace: <TASK> ip_push_pending_frames+0x202/0x240 icmp_push_reply+0x30d/0x430 __icmp_send+0x1149/0x24f0 ip_options_compile+0xa2/0xd0 ip_rcv_finish_core+0x829/0x1950 ip_rcv+0x2d7/0x420 __netif_receive_skb_one_core+0x185/0x1f0 netif_receive_skb+0x90/0x450 tun_get_user+0x3413/0x3fb0 tun_chr_write_iter+0xe4/0x220 ... Fix this by checking rt2->rt_type after ip_route_input(). If it's RTN_LOCAL, the route cannot be used for output, so treat it as an error. The reproducer requires kernel modification to widen the race window, making it unsuitable as a selftest. It is available at: https://gist.github.com/mrpre/eae853b72ac6a750f5d45d64ddac1e81 | |||||
| CVE-2026-45906 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: pf1550: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle. | |||||
| CVE-2026-45907 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix deadlocks between devlink and netdev instance locks In the mentioned "Fixes" commit, various work tasks triggering devlink health reporter recovery were switched to use netdev_trylock to protect against concurrent tear down of the channels being recovered. But this had the side effect of introducing potential deadlocks because of incorrect lock ordering. The correct lock order is described by the init flow: probe_one -> mlx5_init_one (acquires devlink lock) -> mlx5_init_one_devl_locked -> mlx5_register_device -> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe -> register_netdev (acquires rtnl lock) -> register_netdevice (acquires netdev lock) => devlink lock -> rtnl lock -> netdev lock. But in the current recovery flow, the order is wrong: mlx5e_tx_err_cqe_work (acquires netdev lock) -> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report -> devlink_health_report (acquires devlink lock => boom!) -> devlink_health_reporter_recover -> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx -> mlx5e_tx_reporter_err_cqe_recover The same pattern exists in: mlx5e_reporter_rx_timeout mlx5e_reporter_tx_ptpsq_unhealthy mlx5e_reporter_tx_timeout Fix these by moving the netdev_trylock calls from the work handlers lower in the call stack, in the respective recovery functions, where they are actually necessary. | |||||
| CVE-2026-45908 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix memory leak in amdxdna_ubuf_map The amdxdna_ubuf_map() function allocates memory for sg and internal sg table structures, but it fails to free them if subsequent operations (sg_alloc_table_from_pages or dma_map_sgtable) fail. | |||||
| CVE-2026-45909 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: Drop __initconst from gates Since commit 8ceff24a754a ("clk: mediatek: clk-gate: Refactor mtk_clk_register_gate to use mtk_gate struct") the mtk_gate structs are no longer just used for initialization/registration, but also at runtime. So drop __initconst annotations. | |||||
| CVE-2026-45910 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix race condition in QP timer handlers I encontered the following warning: WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... libsha1 [last unloaded: ip6_udp_tunnel] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT Tainted: [C]=CRAP Hardware name: Raspberry Pi 4 Model B Rev 1.2 Call trace: rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P) retransmit_timer+0x130/0x188 [rdma_rxe] call_timer_fn+0x68/0x4d0 __run_timers+0x630/0x888 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400 ... refcount_t: underflow; use-after-free. WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400 The issue is caused by a race condition between retransmit_timer() and rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping to zero during timer handler execution. It seems this warning is harmless because rxe_qp_do_cleanup() will flush all pending timers and requests. Example of flow causing the issue: CPU0 CPU1 retransmit_timer() { spin_lock_irqsave rxe_destroy_qp() __rxe_cleanup() __rxe_put() // qp->ref_count decrease to 0 rxe_qp_do_cleanup() { if (qp->valid) { rxe_sched_task() { WARN_ON(rxe_read(task->qp) <= 0); } } spin_unlock_irqrestore } spin_lock_irqsave qp->valid = 0 spin_unlock_irqrestore } Ensure the QP's reference count is maintained and its validity is checked within the timer callbacks by adding calls to rxe_get(qp) and corresponding rxe_put(qp) after use. | |||||
| CVE-2026-45911 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix role switching during resume If the role change while we are suspended, the cdns3 driver switches to the new mode during resume. However, switching to host mode in this context causes a NULL pointer dereference. The host role's start() operation registers a xhci-hcd device, but its probe is deferred while we are in the resume path. The host role's resume() operation assumes the xhci-hcd device is already probed, which is not the case, leading to the dereference. Since the start() operation of the new role is already called, the resume operation can be skipped. So skip the resume operation for the new role if a role switch occurs during resume. Once the resume sequence is complete, the xhci-hcd device can be probed in case of host mode. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208 Mem abort info: ... Data abort info: ... [0000000000000208] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted 6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT Hardware name: Texas Instruments J7200 EVM (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usb_hcd_is_primary_hcd+0x0/0x1c lr : cdns_host_resume+0x24/0x5c ... Call trace: usb_hcd_is_primary_hcd+0x0/0x1c (P) cdns_resume+0x6c/0xbc cdns3_controller_resume.isra.0+0xe8/0x17c cdns3_plat_resume+0x18/0x24 platform_pm_resume+0x2c/0x68 dpm_run_callback+0x90/0x248 device_resume+0x100/0x24c dpm_resume+0x190/0x2ec dpm_resume_end+0x18/0x34 suspend_devices_and_enter+0x2b0/0xa44 pm_suspend+0x16c/0x5fc state_store+0x80/0xec kobj_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x130/0x1dc vfs_write+0x240/0x370 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0x108 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401) ---[ end trace 0000000000000000 ]--- | |||||