Total
18784 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-46064 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix heap over-read in ibmasm_send_i2o_message() The ibmasm_send_i2o_message() function uses get_dot_command_size() to compute the byte count for memcpy_toio(), but this value is derived from user-controlled fields in the dot_command_header (command_size: u8, data_size: u16) and is never validated against the actual allocation size. A root user can write a small buffer with inflated header fields, causing memcpy_toio() to read up to ~65 KB past the end of the allocation into adjacent kernel heap, which is then forwarded to the service processor over MMIO. Silently clamping the copy size is not sufficient: if the header fields claim a larger size than the buffer, the SP receives a dot command whose own header is inconsistent with the I2O message length, which can cause the SP to desynchronize. Reject such commands outright by returning failure. Validate command_size before calling get_mfa_inbound() to avoid leaking an I2O message frame: reading INBOUND_QUEUE_PORT dequeues a hardware frame from the controller's free pool, and returning without a corresponding set_mfa_inbound() call would permanently exhaust it. Additionally, clamp command_size to I2O_COMMAND_SIZE before the memcpy_toio() so the MMIO write stays within the I2O message frame, consistent with the clamping already performed by outgoing_message_size() for the header field. | |||||
| CVE-2026-46086 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: use a stable FDB dst snapshot in RCU readers Local FDB entries can be rewritten in place by `fdb_delete_local()`, which updates `f->dst` to another port or to `NULL` while keeping the entry alive. Several bridge RCU readers inspect `f->dst`, including `br_fdb_fillbuf()` through the `brforward_read()` sysfs path. These readers currently load `f->dst` multiple times and can therefore observe inconsistent values across the check and later dereference. In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change `f->dst` after the NULL check and before the `port_no` dereference, leading to a NULL-ptr-deref. Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each affected RCU reader and using that snapshot for the rest of the access sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()` with `WRITE_ONCE()` so the readers and writer use matching access patterns. | |||||
| CVE-2026-46065 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an instance as part of initializing deferred I/O and remove it only after the final mapping has been closed. If the fb_info and the contained deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info to invalidate the mapping. Any access will then result in a SIGBUS signal. Fixes a long-standing problem, where a device hot-unplug happens while user space still has an active mapping of the graphics memory. The hot- unplug frees the instance of struct fb_info. Accessing the memory will operate on undefined state. | |||||
| CVE-2026-46141 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/xive: fix kmemleak caused by incorrect chip_data lookup The kmemleak reports the following memory leak: Unreferenced object 0xc0000002a7fbc640 (size 64): comm "kworker/8:1", pid 540, jiffies 4294937872 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 09 04 00 04 00 00 ................ 00 00 a7 81 00 00 0a c0 00 00 08 04 00 04 00 00 ................ backtrace (crc 177d48f6): __kmalloc_cache_noprof+0x520/0x730 xive_irq_alloc_data.constprop.0+0x40/0xe0 xive_irq_domain_alloc+0xd0/0x1b0 irq_domain_alloc_irqs_parent+0x44/0x6c pseries_irq_domain_alloc+0x1cc/0x354 irq_domain_alloc_irqs_parent+0x44/0x6c msi_domain_alloc+0xb0/0x220 irq_domain_alloc_irqs_locked+0x138/0x4d0 __irq_domain_alloc_irqs+0x8c/0xfc __msi_domain_alloc_irqs+0x214/0x4d8 msi_domain_alloc_irqs_all_locked+0x70/0xf8 pci_msi_setup_msi_irqs+0x60/0x78 __pci_enable_msix_range+0x54c/0x98c pci_alloc_irq_vectors_affinity+0x16c/0x1d4 nvme_pci_enable+0xac/0x9c0 [nvme] nvme_probe+0x340/0x764 [nvme] This occurs when allocating MSI-X vectors for an NVMe device. During allocation the XIVE code creates a struct xive_irq_data and stores it in irq_data->chip_data. When the MSI-X irqdomain is later freed, xive_irq_free_data() is responsible for retrieving this structure and freeing it. However, after commit cc0cc23babc9 ("powerpc/xive: Untangle xive from child interrupt controller drivers"), xive_irq_free_data() retrieves the chip_data using irq_get_chip_data(), which looks up the data through the child domain. This is incorrect because the XIVE-specific irq data is associated with the XIVE (parent) domain. As a result the lookup fails and the allocated struct xive_irq_data is never freed, leading to the kmemleak report shown above. Fix this by retrieving the irq_data from the correct domain using irq_domain_get_irq_data() and then accessing the chip_data via irq_data_get_irq_chip_data(). | |||||
| CVE-2026-46142 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix VF illegal register access Register WX_CFG_PORT_ST is a PF restricted register. When a VF is initialized, attempting to read this register triggers an illegal register access, which lead to a system hang. When the device is VF, the bus function ID can be obtained directly from the PCI_FUNC(pdev->devfn). | |||||
| CVE-2026-46066 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix num_ops off-by-one when crypto allocation fails move_dirty_folio_in_page_array() may fail if the file is encrypted, the dirty folio is not the first in the batch, and it fails to allocate a bounce buffer to hold the ciphertext. When that happens, ceph_process_folio_batch() simply redirties the folio and flushes the current batch -- it can retry that folio in a future batch. However, if this failed folio is not contiguous with the last folio that did make it into the batch, then ceph_process_folio_batch() has already incremented `ceph_wbc->num_ops`; because it doesn't follow through and add the discontiguous folio to the array, ceph_submit_write() -- which expects that `ceph_wbc->num_ops` accurately reflects the number of contiguous ranges (and therefore the required number of "write extent" ops) in the writeback -- will panic the kernel: BUG_ON(ceph_wbc->op_idx + 1 != req->r_num_ops); This issue can be reproduced on affected kernels by writing to fscrypt-enabled CephFS file(s) with a 4KiB-written/4KiB-skipped/repeat pattern (total filesize should not matter) and gradually increasing the system's memory pressure until a bounce buffer allocation fails. Fix this crash by decrementing `ceph_wbc->num_ops` back to the correct value when move_dirty_folio_in_page_array() fails, but the folio already started counting a new (i.e. still-empty) extent. The defect corrected by this patch has existed since 2022 (see first `Fixes:`), but another bug blocked multi-folio encrypted writeback until recently (see second `Fixes:`). The second commit made it into 6.18.16, 6.19.6, and 7.0-rc1, unmasking the panic in those versions. This patch therefore fixes a regression (panic) introduced by cac190c7674f. | |||||
| CVE-2026-46067 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_memcg_{used,free}_bp Users can set damos_quota_goal->nid with arbitrary value for node_memcg_{used,free}_bp. But DAMON core is using those for NODE-DATA() without a validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo mkdir /sys/fs/cgroup/foo $ sudo ./damo start --damos_action stat --damos_quota_interval 1s \ --damos_quota_goal node_memcg_used_bp 50% -1 /foo $ sudo dmseg [...] [ 524.181426] Unable to handle kernel paging request at virtual address 0000000000002c00 Fix this issue by adding the validation of the given node id. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio. | |||||
| CVE-2026-46143 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm-lpass-dai: Fix multiple graph opens As prepare can be called mulitple times, this can result in multiple graph opens for playback path. This will result in a memory leaks, fix this by adding a check before opening. | |||||
| CVE-2026-46068 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx The bounce buffers are allocated with __get_free_pages() using BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error path and nx842_crypto_free_ctx() release the buffers with free_page(). Use free_pages() with the matching order instead. | |||||
| CVE-2026-46069 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup() The mwifiex_adapter_cleanup() function uses timer_delete() (non-synchronous) for the wakeup_timer before the adapter structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If the wakeup_timer callback (wakeup_timer_fn) is executing when mwifiex_adapter_cleanup() is called, the callback will continue to access adapter fields (adapter->hw_status, adapter->if_ops.card_reset, etc.) which may be freed by mwifiex_free_adapter() called later in the mwifiex_remove_card() path. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. | |||||
| CVE-2026-46070 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: validate payload size before accessing journal metadata r5c_recovery_analyze_meta_block() and r5l_recovery_verify_data_checksum_for_mb() iterate over payloads in a journal metadata block using on-disk payload size fields without validating them against the remaining space in the metadata block. A corrupted journal contains payload sizes extending beyond the PAGE_SIZE boundary can cause out-of-bounds reads when accessing payload fields or computing offsets. Add bounds validation for each payload type to ensure the full payload fits within meta_size before processing. | |||||
| CVE-2026-46114 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c unconditionally dereferences 8 bytes at payload_addr(pkt): value = *(u64 *)payload_addr(pkt); check_rkey() previously accepted an ATOMIC_WRITE request with pktlen == resid == 0 because the length validation only compared pktlen against resid. A remote initiator that sets the RETH length to 0 therefore reaches atomic_write_reply() with a zero-byte logical payload, and the responder reads sizeof(u64) bytes from past the logical end of the packet into skb->head tailroom, then writes those 8 bytes into the attacker's MR via rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel tailroom per probe (the other 4 bytes are the packet's own trailing ICRC). IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is protocol-invalid. Hoist a strict length check into check_rkey() so the responder never reaches the unchecked dereference, and keep the existing WRITE-family length logic for the normal RDMA WRITE path. Reproduced on mainline with an unmodified rxe driver: a sustained zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer bytes into the attacker's MR, including recognisable kernel strings and partial kernel-direct-map pointer words. With this patch applied the responder rejects the PDU and the MR stays all-zero. | |||||
| CVE-2026-46115 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: block: add pgmap check to biovec_phys_mergeable biovec_phys_mergeable() is used by the request merge, DMA mapping, and integrity merge paths to decide if two physically contiguous bvec segments can be coalesced into one. It currently has no check for whether the segments belong to different dev_pagemaps. When zone device memory is registered in multiple chunks, each chunk gets its own dev_pagemap. A single bio can legitimately contain bvecs from different pgmaps -- iov_iter_extract_bvecs() breaks at pgmap boundaries but the outer loop in bio_iov_iter_get_pages() continues filling the same bio. If such bvecs are physically contiguous, biovec_phys_mergeable() will coalesce them, making it impossible to recover the correct pgmap for the merged segment via page_pgmap(). Add a zone_device_pages_have_same_pgmap() check to prevent merging bvec segments that span different pgmaps. | |||||
| CVE-2026-46071 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Avoid clearing VMCB_LBR in vmcb12 svm_copy_lbrs() always marks VMCB_LBR dirty in the destination VMCB. However, nested_svm_vmexit() uses it to copy LBRs to vmcb12, and clearing clean bits in vmcb12 is not architecturally defined. Move vmcb_mark_dirty() to callers and drop it for vmcb12. This also facilitates incoming refactoring that does not pass the entire VMCB to svm_copy_lbrs(). | |||||
| CVE-2026-46118 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle() commit 6d3789d347a7 ("papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()"), changed the create handle to FD_PREPARE(), but it caused kernel null-ptr-deref because after call to retain_and_null_ptr(src_info), src_info is re-used for adding it to the global list. Getting the following kernel panic in papr_hvpipe_dev_create_handle() when trying to add src_info to the list. Kernel attempted to write user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on write at 0x00000000 Faulting instruction address: 0xc0000000001b44a0 Oops: Kernel access of bad area, sig: 11 [#1] ... Call Trace: papr_hvpipe_dev_ioctl+0x1f4/0x48c (unreliable) sys_ioctl+0x528/0x1064 system_call_exception+0x128/0x360 system_call_vectored_common+0x15c/0x2ec Now, the error handling with FD_PREPARE's file cleanup and __free(kfree) auto cleanup is getting too convoluted. This is mainly because we need to ensure only 1 user get the srcID handle. To simplify this, we allocate prepare the src_info in the beginning and add it to the global list under a spinlock after checking that no duplicates exist. This simplify the error handling where if the FD_ADD fails, we can simply remove the src_info from the list and consume any pending msg in hvpipe to be cleared, after src_info became visible in the global list. | |||||
| CVE-2026-46072 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: add buffer boundary checks to run_unpack() run_unpack() checks `run_buf < run_last` at the top of the while loop but then reads size_size and offset_size bytes via run_unpack_s64() without verifying they fit within the remaining buffer. A crafted NTFS image with truncated run data in an MFT attribute triggers an OOB heap read of up to 15 bytes when the filesystem is mounted. Add boundary checks before each run_unpack_s64() call to ensure the declared field size does not exceed the remaining buffer. Found by fuzzing with a source-patched harness (LibAFL + QEMU). | |||||
| CVE-2026-46073 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt wait_for_completion_interruptible_timeout() returns -ERESTARTSYS when interrupted. This needs to abort the URB and return an error. No data has been received from the device so any reads from the transfer buffer are invalid. The original code tests !ret, which only catches the timeout case (0). On signal delivery (-ERESTARTSYS), !ret is false so the function skips usb_kill_urb() and falls through to read from the unfilled transfer buffer. Fix by capturing the return value into a long (matching the function return type) and handling signal (negative) and timeout (zero) cases with separate checks that both call usb_kill_urb() before returning. | |||||
| CVE-2026-46074 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: spi: ch341: fix memory leaks on probe failures Make sure to deregister the controller, disable pins, and kill and free the RX URB on probe failures to mirror disconnect and avoid memory leaks and use-after-free. Also add an explicit URB kill on disconnect for symmetry (even if that is not strictly required as USB core would have stopped it in the current setup). | |||||
| CVE-2026-46075 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - Fix potential UAF and memory leak in remove path Unregister the hwrng to prevent new ->read() calls and flush the Atmel I2C workqueue before teardown to prevent a potential UAF if a queued callback runs while the device is being removed. Drop the early return to ensure sysfs entries are removed and ->hwrng.priv is freed, preventing a memory leak. | |||||
| CVE-2026-46076 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.9 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1 Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the hypercall is something other than one of the supported Hyper-V hypercalls. When all of the above conditions are met, KVM will intercept VMMCALL but never forward it to L1, i.e. will let L2 make hypercalls as if it were L1. The TLFS says a whole lot of nothing about this scenario, so go with the architectural behavior, which says that VMMCALL #UDs if it's not intercepted. Opportunistically do a 2-for-1 stub trade by stub-ifying the new API instead of the helpers it uses. The last remaining "single" stub will soon be dropped as well. [sean: rewrite changelog and comment, tag for stable, remove defunct stubs] | |||||