Total
18782 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53157 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: phonet: free phonet_device after RCU grace period phonet_device_destroy() removes a phonet_device from the per-net device list with list_del_rcu(), but frees it immediately. RCU readers walking the same list can still hold a pointer to the object after it has been removed, leading to a slab-use-after-free. Use kfree_rcu(), matching the lifetime rule already used by phonet_address_del() for the same object type. | |||||
| CVE-2026-53158 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix NULL pointer dereference in rpmsg callback A NULL pointer dereference was observed on Hawi at boot when the DSP sends a glink message before fastrpc_rpmsg_probe() has completed initialization: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178 pc : _raw_spin_lock_irqsave+0x34/0x8c lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] ... Call trace: _raw_spin_lock_irqsave+0x34/0x8c (P) fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] qcom_glink_native_rx+0x538/0x6a4 qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem] The faulting address 0x178 corresponds to the lock variable inside struct fastrpc_channel_ctx, confirming that cctx is NULL when fastrpc_rpmsg_callback() attempts to take the spinlock. There are two issues here. First, dev_set_drvdata() is called before spin_lock_init() and idr_init(), leaving a window where the callback can retrieve a valid cctx pointer but operate on an uninitialized spinlock. Second, the rpmsg channel becomes live as soon as the driver is bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata() is called at all, resulting in dev_get_drvdata() returning NULL. Fix both issues by moving all cctx initialization ahead of dev_set_drvdata() so the structure is fully initialized before it becomes visible to the callback, and add a NULL check in fastrpc_rpmsg_callback() as a guard against any remaining window. | |||||
| CVE-2026-53164 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Do not try to iommu_map a 0 length region in swiotlb iommu_dma_iova_link_swiotlb() processes a mapping that is unaligned in three parts, the head, middle and trailer. If the middle is empty because there are no aligned pages it will call down to iommu_map() with a 0 size which the iommupt implementation will fail as illegal. It then tries to do an error unwind and starts from the wrong spot corrupting the mapping so the eventual destruction triggers a WARN_ON. Check for 0 length and avoid mapping and use offset not 0 as the starting point to unlink. This is frequently triggered by using some kinds of thunderbolt NVMe drives that trigger forced SWIOTLB for unaligned memory. NVMe seems to pass in oddly aligned buffers for the passthrough commands from smartctl that hit this condition. | |||||
| CVE-2026-53165 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iomap: avoid potential null folio->mapping deref during error reporting When a buffered read fails, iomap_finish_folio_read() reports the error with fserror_report_io(folio->mapping->host, ...). This is called after ifs->read_bytes_pending has been decremented by the bytes attempted to be read. For a folio split across multiple read completions, the folio is only guaranteed to stay locked while read_bytes_pending > 0. Once iomap_finish_folio_read() decrements read_bytes_pending, another in-flight read can complete and end the read on the folio, which unlocks it. This allows truncate logic to run and detach the folio (set folio->mapping to NULL). The error reporting path then can dereference a NULL folio->mapping. As reported by Sam Sun, this is the race that can occur: CPU0: failed completion CPU1: final completion CPU2: truncate ----------------------- ---------------------- -------------- read_bytes_pending -= len finished = false /* preempted before fserror_report_io() */ read_bytes_pending -= len finished = true folio_end_read() truncate clears folio->mapping fserror_report_io( folio->mapping->host, ...) ^ NULL deref Fix this by reporting the error first before decrementing ifs->read_bytes_pending. | |||||
| CVE-2026-53133 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Fix truncation for block sizes >= 4G When the iommu is used the linearization of the mapping can give a single block that is very large split across multiple SG entries. When __rdma_block_iter_next() reassembles the split SG entries it is overflowing the 32 bit stack values and computed the wrong DMA addresses for blocks after the truncation. Use the right types to hold DMA addresses. | |||||
| CVE-2026-53134 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fib: fix stale stack leak via the OIFNAME register For NFT_FIB_RESULT_OIFNAME the destination register is declared with len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail, RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one register via "*dest = 0". The remaining three registers are left as whatever was on the stack in nft_do_chain()'s struct nft_regs, and a downstream expression that loads the register span can leak that uninitialised kernel stack to userspace. The NFTA_FIB_F_PRESENT existence check has the same shape: it is only meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type while the eval stores a single byte via nft_reg_store8(), leaving the rest of the declared span stale. Fix both: - replace the bare "*dest = 0" in the eval with nft_fib_store_result(), which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already used on the other early-return path), and - restrict NFTA_FIB_F_PRESENT to NFT_FIB_RESULT_OIF and declare its destination as a single u8, so the marked span matches the one byte the eval writes. | |||||
| CVE-2026-53135 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs [Why & How] dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc without checking for NULL. A connector can be connected but not bound to any CRTC (e.g. after hot-plug before the next atomic commit), causing a kernel crash when writing to the sdp_message debugfs node. The function also ignores the user-provided size argument and always passes 36 bytes to copy_from_user(), reading past the user buffer when size < 36. Fix both issues by: - Returning -ENODEV when connector->base.state or state->crtc is NULL - Clamping write_size to min(size, sizeof(data)) (cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300) | |||||
| CVE-2026-53136 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp VBIOS HDMI retimer register count to array size [Why & How] The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9] and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated before use, so a malformed VBIOS can specify values up to 255, causing an out-of-bounds heap write during driver probe. Clamp each register count to the destination array size using min_t() before the copy loops, in both get_integrated_info_v11() and get_integrated_info_v2_1(). (cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69) | |||||
| CVE-2026-53137 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size [Why & How] During HDCP 2.x repeater authentication over HDMI, the driver reads the sink's RxStatus register and extracts a 10-bit message size field (max value 1023). This value is used as the read length for the ReceiverID list without being clamped to the size of the destination buffer rx_id_list[177]. A malicious HDMI repeater could advertise a message size larger than the buffer, causing an out-of-bounds write during the I2C read. Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the rx_id_list buffer, matching the approach already used in the DP branch. (cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) | |||||
| CVE-2026-53138 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;) and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since most are connector- based) 256 is a generous upper bound. (cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93) | |||||
| CVE-2026-53141 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix global performance monitor reference counting In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on the perfmon it returns, but v3d_perfmon_set_global_ioctl() and v3d_perfmon_delete() fail to release that reference on several paths: 1. v3d_perfmon_set_global_ioctl() leaks the reference on its error paths. 2. CLEAR_GLOBAL leaks both the find reference and the reference previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl that configured it. 3. Destroying a perfmon that is the current global perfmon leaks the reference stashed by the SET_GLOBAL ioctl. Release each of these references explicitly. | |||||
| CVE-2026-53142 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/display: fix oops in suspend/shutdown without display The xe driver keeps track of whether to probe display, and whether display hardware is there, using xe->info.probe_display. It gets set to false if there's no display after intel_display_device_probe(). However, the display may also be disabled via fuses, detected at a later time in intel_display_device_info_runtime_init(). In this case, the xe driver does for_each_intel_crtc() on uninitialized mode config in xe_display_flush_cleanup_work(), leading to a NULL pointer dereference, and generally calls display code with display info cleared. Check for intel_display_device_present() after intel_display_device_info_runtime_init(), and reset xe->info.probe_display as necessary. Also do unset_display_features() for completeness, although display runtime init has already done that. This will need to be unified across all cases later. Move intel_display_device_info_runtime_init() call slightly earlier, similar to i915, to avoid a bunch of unnecessary setup for no display cases. Note #1: The xe driver has no business doing low level display plumbing like for_each_intel_crtc() to begin with. It all needs to happen in display code. Note #2: The actual bug is present already in commit 44e694958b95 ("drm/xe/display: Implement display support"), but the oops was likely introduced later at commit ddf6492e0e50 ("drm/xe/display: Make display suspend/resume work on discrete"). (cherry picked from commit 7c3eb9f47533220888a67266448185fd0775d4da) | |||||
| CVE-2026-53144 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix NULL dereference in get_queue_ids() When usr_queue_id_array is NULL and num_queues is non-zero, get_queue_ids() returns NULL. The callers check only IS_ERR() on the return value; since IS_ERR(NULL) == false the check passes, and suspend_queues() calls q_array_invalidate() which immediately dereferences NULL while iterating num_queues times. Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying num_queues > 0 with a zero queue_array_ptr, causing a kernel panic. A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op (q_array_invalidate never executes, and resume_queues already guards all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL) only when num_queues is non-zero and the pointer is absent; both callers already propagate IS_ERR() returns correctly to userspace. (cherry picked from commit f165a82cdf503884bb1797771c61b2fcc72113d4) | |||||
| CVE-2018-10902 | 4 Canonical, Debian, Linux and 1 more | 6 Ubuntu Linux, Debian Linux, Linux Kernel and 3 more | 2026-07-07 | 4.6 MEDIUM | 7.8 HIGH |
| It was found that the raw midi kernel driver does not protect against concurrent access which leads to a double realloc (double free) in snd_rawmidi_input_params() and snd_rawmidi_output_status() which are part of snd_rawmidi_ioctl() handler in rawmidi.c file. A malicious local attacker could possibly use this for privilege escalation. | |||||
| CVE-2026-53301 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: reset: amlogic: t7: Fix null reset ops Fix missing reset ops causing kernel null pointer dereference. This SOC's reset is currently not used yet. | |||||
| CVE-2026-53302 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: eip93 - fix hmac setkey algo selection eip93_hmac_setkey() allocates a temporary ahash transform for computing HMAC ipad/opad key material. The allocation uses the driver-specific cra_driver_name (e.g. "sha256-eip93") but passes CRYPTO_ALG_ASYNC as the mask, which excludes async algorithms. Since the EIP93 hash algorithms are the only ones registered under those driver names and they are inherently async, the lookup is self-contradictory and always fails with -ENOENT. When called from the AEAD setkey path, this failure leaves the SA record partially initialized with zeroed digest fields. A subsequent crypto operation then dereferences a NULL pointer in the request context, resulting in a kernel panic: ``` pc : eip93_aead_handle_result+0xc8c/0x1240 [crypto_hw_eip93] lr : eip93_aead_handle_result+0xbec/0x1240 [crypto_hw_eip93] sp : ffffffc082feb820 x29: ffffffc082feb820 x28: ffffff8011043980 x27: 0000000000000000 x26: 0000000000000000 x25: ffffffc078da0bc8 x24: 0000000091043980 x23: ffffff8004d59e50 x22: ffffff8004d59410 x21: ffffff8004d593c0 x20: ffffff8004d593c0 x19: ffffff8004d4f300 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000007fda7aa498 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: fffffffff8127a80 x9 : 0000000000000000 x8 : ffffff8004d4f380 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : 0000000000000008 x3 : 0000000000000009 x2 : 0000000000000008 x1 : 0000000028000003 x0 : ffffff8004d388c0 Code: 910142b6 f94012e0 f9002aa0 f90006d3 (f9400740) ``` The reported symbol eip93_aead_handle_result+0xc8c is a resolution artifact from static functions being merged under the nearest exported symbol. Decoding the faulting sequence: ``` 910142b6 ADD X22, X21, #0x50 f94012e0 LDR X0, [X23, #0x20] f9002aa0 STR X0, [X21, #0x50] f90006d3 STR X19, [X22, #0x8] f9400740 LDR X0, [X26, #0x8] ``` The faulting LDR at [X26, #0x8] is loading ctx->flags (offset 8 in eip93_hash_ctx), where ctx has been resolved to NULL from a partially initialized or unreachable transform context following the failed setkey. Fix this by dropping the CRYPTO_ALG_ASYNC mask from the crypto_alloc_ahash() call. The code already handles async completion correctly via crypto_wait_req(), so there is no requirement to restrict the lookup to synchronous algorithms. Note that hashing a single 64-byte block through the hardware is likely slower than doing it in software due to the DMA round-trip overhead, but offloading it may still spare CPU cycles on the slower embedded cores where this IP is found. [Detailed investigation report of this bug] | |||||
| CVE-2026-53303 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show() In f2fs_sbi_show(), the extension_list, extension_count and hot_ext_count are read without holding sbi->sb_lock. If a concurrent sysfs store modifies the extension list via f2fs_update_extension_list(), the show path may read inconsistent count and array contents, potentially leading to out-of-bounds access or displaying stale data. Fix this by holding sb_lock around the entire extension list read and format operation. | |||||
| CVE-2026-53304 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Resolve soft lockup issue when opening /dev/sgX The parameter def_reserved_size defines the default buffer size reserved for each Sg_fd and should be restricted to a range between 0 and 1,048,576 (see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the function sg_proc_write_dressz enforces this limit, it is possible to bypass it by directly modifying the module parameter as shown below, which then causes a soft lockup: echo -1 > /sys/module/sg/parameters/def_reserved_size exec 4<> /dev/sg0 watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537] Modules loaded: CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134, PREEMPT disabled Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version 1.16.1-2.fc37 dated 04/01/2014 ... Call Trace: sg_build_reserve+0x5c/0xa0 sg_add_sfp+0x168/0x270 sg_open+0x16e/0x340 chrdev_open+0xbe/0x230 do_dentry_open+0x175/0x480 vfs_open+0x34/0xf0 do_open+0x265/0x3d0 path_openat+0x110/0x290 do_filp_open+0xc3/0x170 do_sys_openat2+0x71/0xe0 __x64_sys_openat+0x6d/0xa0 do_syscall_64+0x62/0x310 entry_SYSCALL_64_after_hwframe+0x76/0x7e The fix is to use module_param_cb to validate and reject invalid values assigned to def_reserved_size. | |||||
| CVE-2026-53305 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ps883x: Fix Oops at unbind When trying to unbind a device in order to bind to it vfio-platform as: echo bc0000.geniqup > /sys/bus/platform/devices/bc0000.geniqup/driver/unbind I get the following Oops: [ 436.478639] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [ 436.487762] Mem abort info: [ 436.490716] ESR = 0x0000000096000004 [ 436.494595] EC = 0x25: DABT (current EL), IL = 32 bits [ 436.500071] SET = 0, FnV = 0 [ 436.503250] EA = 0, S1PTW = 0 [ 436.506505] FSC = 0x04: level 0 translation fault [ 436.511533] Data abort info: [ 436.514558] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 436.520215] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 436.525436] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 436.530918] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008861a9000 [ 436.537554] [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 [ 436.544548] Internal error: Oops: 0000000096000004 [#1] SMP [ 436.550374] Modules linked in: [ 436.553542] CPU: 2 UID: 0 PID: 671 Comm: bash Tainted: G W 7.0.0-rc3-g56fcdd0911a5-dirty #2 PREEMPT [ 436.564440] Tainted: [W]=WARN [ 436.567515] Hardware name: LENOVO 91B6CTO1WW/3796, BIOS O6NKT3BA 05/02/2025 [ 436.574675] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 436.581841] pc : ps883x_retimer_remove+0x14/0x94 [ 436.586605] lr : i2c_device_remove+0x28/0x84 [ 436.591017] sp : ffff8000847137c0 That's because the ps883x_retimer_remove() retrieves the driver data from i2c_get_clientdata() which was never set at probe. So, add i2c_set_clientdata() at the end of the probe. | |||||
| CVE-2026-53306 | 1 Linux | 1 Linux Kernel | 2026-07-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tty: hvc_iucv: fix off-by-one in number of supported devices MAX_HVC_IUCV_LINES == HVC_ALLOC_TTY_ADAPTERS == 8. This is the number of entries in: static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES]; Sometimes hvc_iucv_table[] is limited by: (a) if (num > hvc_iucv_devices) // for error detection or (b) for (i = 0; i < hvc_iucv_devices; i++) // in 2 places (so these 2 don't agree; second one appears to be correct to me.) hvc_iucv_devices can be 0..8. This is a counter. (c) if (hvc_iucv_devices > MAX_HVC_IUCV_LINES) If hvc_iucv_devices == 8, (a) allows the code to access hvc_iucv_table[8]. Oops. | |||||