Filtered by vendor Linux
Subscribe
Total
18822 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53286 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix double free and use-after-free in aux device error paths When auxiliary_device_add() fails in idpf_plug_vport_aux_dev() or idpf_plug_core_aux_dev(), the err_aux_dev_add label calls auxiliary_device_uninit() and falls through to err_aux_dev_init. The uninit call will trigger put_device(), which invokes the release callback (idpf_vport_adev_release / idpf_core_adev_release) that frees iadev. The fall-through then reads adev->id from the freed iadev for ida_free() and double-frees iadev with kfree(). Free the IDA slot and clear the back-pointer before uninit, while adev is still valid, then return immediately. Commit 65637c3a1811 ("idpf: fix UAF in RDMA core aux dev deinitialization") fixed the same use-after-free in the matching unplug path in this file but missed both probe error paths. | |||||
| CVE-2026-53287 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: audit: fix incorrect inheritable capability in CAPSET records __audit_log_capset() records the effective capability set into the inheritable field due to a copy-paste error. Every CAPSET audit record therefore reports cap_pi (process inheritable) with the value of cap_effective instead of cap_inheritable. This silently corrupts audit data used for compliance and forensic analysis: an attacker who modifies inheritable capabilities to prepare for a privilege-escalating exec would have the change masked in the audit trail. The bug has been present since the original introduction of CAPSET audit records in 2008. | |||||
| CVE-2026-53289 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL pointer dereference in ice_reset_all_vfs() ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi(). When the VSI rebuild fails (e.g. during NVM firmware update via nvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path, leaving txq_map and rxq_map as NULL. The subsequent unconditional call to ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference in ice_ena_vf_q_mappings() when it accesses vsi->txq_map[0]. The single-VF reset path in ice_reset_vf() already handles this correctly by checking the return value of ice_vf_reconfig_vsi() and skipping ice_vf_post_vsi_rebuild() on failure. Apply the same pattern to ice_reset_all_vfs(): check the return value of ice_vf_rebuild_vsi() and skip ice_vf_post_vsi_rebuild() and ice_eswitch_attach_vf() on failure. The VF is left safely disabled (ICE_VF_STATE_INIT not set, VFGEN_RSTAT not set to VFACTIVE) and can be recovered via a VFLR triggered by a PCI reset of the VF (sysfs reset or driver rebind). Note that this patch does not prevent the VF VSI rebuild from failing during NVM update — the underlying cause is firmware being in a transitional state while the EMP reset is processed, which can cause Admin Queue commands (ice_add_vsi, ice_cfg_vsi_lan) to fail. This patch only prevents the subsequent NULL pointer dereference that crashes the kernel when the rebuild does fail. crash> bt PID: 50795 TASK: ff34c9ee708dc680 CPU: 1 COMMAND: "kworker/u512:5" #0 [ff72159bcfe5bb50] machine_kexec at ffffffffaa8850ee #1 [ff72159bcfe5bba8] __crash_kexec at ffffffffaaa15fba #2 [ff72159bcfe5bc68] crash_kexec at ffffffffaaa16540 #3 [ff72159bcfe5bc70] oops_end at ffffffffaa837eda #4 [ff72159bcfe5bc90] page_fault_oops at ffffffffaa893997 #5 [ff72159bcfe5bce8] exc_page_fault at ffffffffab528595 #6 [ff72159bcfe5bd10] asm_exc_page_fault at ffffffffab600bb2 [exception RIP: ice_ena_vf_q_mappings+0x79] RIP: ffffffffc0a85b29 RSP: ff72159bcfe5bdc8 RFLAGS: 00010206 RAX: 00000000000f0000 RBX: ff34c9efc9c00000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff34c9efc9c00000 RBP: ff34c9efc27d4828 R8: 0000000000000093 R9: 0000000000000040 R10: ff34c9efc27d4828 R11: 0000000000000040 R12: 0000000000100000 R13: 0000000000000010 R14: R15: ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ff72159bcfe5bdf8] ice_sriov_post_vsi_rebuild at ffffffffc0a85e2e [ice] #8 [ff72159bcfe5be08] ice_reset_all_vfs at ffffffffc0a920b4 [ice] #9 [ff72159bcfe5be48] ice_service_task at ffffffffc0a31519 [ice] #10 [ff72159bcfe5be88] process_one_work at ffffffffaa93dca4 #11 [ff72159bcfe5bec8] worker_thread at ffffffffaa93e9de #12 [ff72159bcfe5bf18] kthread at ffffffffaa946663 #13 [ff72159bcfe5bf50] ret_from_fork at ffffffffaa8086b9 The panic occurs attempting to dereference the NULL pointer in RDX at ice_sriov.c:294, which loads vsi->txq_map (offset 0x4b8 in ice_vsi). The faulting VSI is an allocated slab object but not fully initialized after a failed ice_vsi_rebuild(): crash> struct ice_vsi 0xff34c9efc27d4828 netdev = 0x0, rx_rings = 0x0, tx_rings = 0x0, q_vectors = 0x0, txq_map = 0x0, rxq_map = 0x0, alloc_txq = 0x10, num_txq = 0x10, alloc_rxq = 0x10, num_rxq = 0x10, The nvmupdate64e process was performing NVM firmware update: crash> bt 0xff34c9edd1a30000 PID: 49858 TASK: ff34c9edd1a30000 CPU: 1 COMMAND: "nvmupdate64e" #0 [ff72159bcd617618] __schedule at ffffffffab5333f8 #4 [ff72159bcd617750] ice_sq_send_cmd at ffffffffc0a35347 [ice] #5 [ff72159bcd6177a8] ice_sq_send_cmd_retry at ffffffffc0a35b47 [ice] #6 [ff72159bcd617810] ice_aq_send_cmd at ffffffffc0a38018 [ice] #7 [ff72159bcd617848] ice_aq_read_nvm at ffffffffc0a40254 [ice] #8 ---truncated--- | |||||
| CVE-2026-53288 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64: Reserve an extra page for early kernel mapping The final part of [data, end) segment may overflow into the next page of init_pg_end[1] which is the gap page before early_init_stack[2]: [1] crash_arm64_v9.0.1> vtop ffffffed00601000 VIRTUAL PHYSICAL ffffffed00601000 83401000 PAGE DIRECTORY: ffffffecffd62000 PGD: ffffffecffd62da0 => 10000000833fb003 PMD: ffffff80033fb018 => 10000000833fe003 PTE: ffffff80033fe008 => 68000083401f03 PAGE: 83401000 PTE PHYSICAL FLAGS 68000083401f03 83401000 (VALID|SHARED|AF|NG|PXN|UXN) PAGE PHYSICAL MAPPING INDEX CNT FLAGS fffffffec00d0040 83401000 0 0 1 4000 reserved [2] ffffffed002c8000 (r) __pi__data ffffffed0054e000 (d) __pi___bss_start ffffffed005f5000 (b) __pi_init_pg_dir ffffffed005fe000 (b) __pi_init_pg_end ffffffed005ff000 (B) early_init_stack ffffffed00608000 (b) __pi__end For 4K pages, the early kernel mapping may use 2MB block entries but the kernel segments are only 64KB aligned. Segment boundaries that fall within a 2MB block therefore require a PTE table so that different attributes can be applied on either side of the boundary. KERNEL_SEGMENT_COUNT still correctly counts the five permanent kernel VMAs registered by declare_kernel_vmas(). However, since commit 5973a62efa34 ("arm64: map [_text, _stext) virtual address range non-executable+read-only"), the early mapper also maps [_text, _stext) separately from [_stext, _etext). This adds one more early-only split and can require one more page-table page than the existing EARLY_SEGMENT_EXTRA_PAGES allowance reserves. Increase the 4K-page early mapping allowance by one page to cover that additional split. [catalin.marinas@arm.com: rewrote part of the commit log] [catalin.marinas@arm.com: expanded the code comment] | |||||
| CVE-2026-53290 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/eustall: Fix drm_dev_put called before stream disable in close In xe_eu_stall_stream_close(), drm_dev_put() is called before the stream is disabled and its resources are freed. If this drops the last reference, the device structures could be freed while the subsequent cleanup code still accesses them, leading to a use-after-free. Fix this by moving drm_dev_put() after all device accesses are complete. This matches the ordering in xe_oa_release(). (cherry picked from commit 35aff528f7297e949e5e19c9cd7fd748cf1cf21c) | |||||
| CVE-2026-53291 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/conexant: Fix missing error check for jack detection In cx_probe(), the return value of snd_hda_jack_detect_enable_callback() is ignored. This function returns a pointer, and if it fails (e.g., due to memory allocation failure), it returns an error pointer which must be checked using IS_ERR(). If the registration fails, the driver continues to probe, but the jack detection callback will not be registered. This can lead to a kernel crash later when the driver attempts to handle jack events or accesses the uninitialized structure. Check the return value using IS_ERR() and propagate the error via PTR_ERR() to the probe caller. | |||||
| CVE-2026-53292 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via pn_socket_autobind(): kernel BUG at net/phonet/socket.c:213! RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline] RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421 Call Trace: sock_sendmsg_nosec+0x112/0x150 net/socket.c:797 __sock_sendmsg net/socket.c:812 [inline] __sys_sendto+0x402/0x590 net/socket.c:2280 ... pn_socket_autobind() calls pn_socket_bind() with port 0 and, on -EINVAL, assumes the socket was already bound and asserts that the port is non-zero: err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn)); if (err != -EINVAL) return err; BUG_ON(!pn_port(pn_sk(sock->sk)->sobject)); return 0; /* socket was already bound */ However pn_socket_bind() also returns -EINVAL when sk->sk_state is not TCP_CLOSE, even when the socket has never been bound and pn_port() is still 0. In that case the BUG_ON() fires and panics the kernel from a user-triggerable path. Treat the "bind returned -EINVAL but pn_port() is still 0" case as a regular error and propagate -EINVAL to the caller instead of crashing. Existing callers already translate a non-zero return from pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here only changes behaviour from panic to a normal errno. | |||||
| CVE-2026-53294 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: mailbox-test: don't free the reused channel The RX channel can be aliased to the TX channel if it has a different MMIO. This special case needs to be handled when freeing the channels otherwise a double-free occurs. | |||||
| CVE-2026-53293 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix AMDGPU_INFO_READ_MMR_REG There were multiple issues in that code. First of all the order between the reset semaphore and the mm_lock was wrong (e.g. copy_to_user) was called while holding the lock. Then we allocated memory while holding the reset semaphore which is also a pretty big bug and can deadlock. Then we used down_read_trylock() instead of waiting for the reset to finish. (cherry picked from commit 361b6e6b303d4b691f6c5974d3eaab67ca6dd90e) | |||||
| CVE-2026-53295 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: add sanity check for channel array Fail gracefully if there is no channel array attached to the mailbox controller. Otherwise the later dereference will cause an OOPS which might not be seen because mailbox controllers might instantiate very early. Remove the comment explaining the obvious while here. | |||||
| CVE-2026-53296 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: mailbox-test: free channels on probe error On probe error, free the previously obtained channels. This not only prevents a leak, but also UAF scenarios because the client structure will be removed nonetheless because it was allocated with devm. | |||||
| CVE-2026-53297 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Guard mana_remove against double invocation If PM resume fails (e.g., mana_attach() returns an error), mana_probe() calls mana_remove(), which tears down the device and sets gd->gdma_context = NULL and gd->driver_data = NULL. However, a failed resume callback does not automatically unbind the driver. When the device is eventually unbound, mana_remove() is invoked a second time. Without a NULL check, it dereferences gc->dev with gc == NULL, causing a kernel panic. Add an early return if gdma_context or driver_data is NULL so the second invocation is harmless. Move the dev = gc->dev assignment after the guard so it cannot dereference NULL. | |||||
| CVE-2026-53298 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Move ndesc initialization at end of airoha_qdma_init_rx_queue() If queue entry or DMA descriptor list allocation fails in airoha_qdma_init_rx_queue routine, airoha_qdma_cleanup() will trigger a NULL pointer dereference running netif_napi_del() for RX queue NAPIs since netif_napi_add() has never been executed to this particular RX NAPI. The issue is due to the early ndesc initialization in airoha_qdma_init_rx_queue() since airoha_qdma_cleanup() relies on ndesc value to check if the queue is properly initialized. Fix the issue moving ndesc initialization at end of airoha_qdma_init_tx routine. Move page_pool allocation after descriptor list allocation in order to avoid memory leaks if desc allocation fails. | |||||
| CVE-2026-53299 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Move ndesc initialization at end of airoha_qdma_init_tx() If queue entry list allocation fails in airoha_qdma_init_tx_queue routine, airoha_qdma_cleanup_tx_queue() will trigger a NULL pointer dereference accessing the queue entry array. The issue is due to the early ndesc initialization in airoha_qdma_init_tx_queue(). Fix the issue moving ndesc initialization at end of airoha_qdma_init_tx routine. | |||||
| CVE-2026-53300 | 1 Linux | 1 Linux Kernel | 2026-07-08 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: fix NTMP DMA use-after-free issue The AI-generated review reported a potential DMA use-after-free issue [1]. If netc_xmit_ntmp_cmd() times out and returns an error, the pending command is not explicitly aborted, while ntmp_free_data_mem() unconditionally frees the DMA buffer. If the buffer has already been reallocated elsewhere, this may lead to silent memory corruption. Because the hardware eventually processes the pending command and perform a DMA write of the response to the physical address of the freed buffer. To resolve this issue, this patch does the following modifications: 1. Convert cbdr->ring_lock from a spinlock to a mutex The lock was originally a spinlock in case NTMP operations might be invoked from atomic context. After downstream support for all NTMP tables, no such usage has materialized. A mutex lock is now required because the driver now needs to reclaim used BDs and release associated DMA memory within the lock's context, while dma_free_coherent() might sleep. 2. Introduce software command BD (struct netc_swcbd) The hardware write-back overwrites the addr and len fields of the BD, so the driver cannot rely on the hardware BD to free the associated DMA memory. The driver now maintains a software shadow BD storing the DMA buffer pointer, DMA address, and size. And netc_xmit_ntmp_cmd() only reclaims older BDs when the number of used BDs reaches NETC_CBDR_CLEAN_WORK (16). The software BD enables correct DMA memory release. With this, struct ntmp_dma_buf and ntmp_free_data_mem() are no longer needed and are removed. 3. Require callers to hold ring_lock across netc_xmit_ntmp_cmd() netc_xmit_ntmp_cmd() releases the ring_lock before the caller finishes consuming the response. At this point, if a concurrent thread submits a new command, it may trigger ntmp_clean_cbdr() and free the DMA buffer while it is still in use. Move ring_lock ownership to the caller to ensure the response buffer cannot be reclaimed prematurely. So the helpers ntmp_select_and_lock_cbdr() and ntmp_unlock_cbdr() are added. These changes eliminate the DMA use-after-free condition and ensure safe and consistent BD reclamation and DMA buffer lifecycle management. | |||||
| CVE-2026-53233 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netdev: fix double-free in netdev_nl_bind_rx_doit() Sashiko flags that genlmsg_reply() always consumes the skb. The error path calls nlmsg_free(rsp) so we can't jump directly to it. Let's not unbind, just propagate the error to the user. This is the typical way of handling genlmsg_reply() failures. They shouldn't happen unless user does something silly like calling the kernel with an already-full rcvbuf. | |||||
| CVE-2026-53241 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: dummy: fix UMP event stack overread The dummy sequencer port forwards events by copying an incoming struct snd_seq_event into a stack temporary, rewriting source and destination, and dispatching the temporary to subscribers. That legacy event storage is smaller than struct snd_seq_ump_event. When a UMP event reaches the dummy client, the copy leaves the UMP flag set but only provides legacy-sized stack storage. The subscriber delivery path then uses snd_seq_event_packet_size() and copies a UMP-sized packet from that stack object, reading past the end of the temporary. Use the existing union __snd_seq_event storage and copy the packet size reported for the incoming event before rewriting the common routing fields. This preserves the full UMP packet for UMP events while keeping legacy event handling unchanged. | |||||
| CVE-2026-53242 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: PCM: Fix wait queue list corruption in snd_pcm_drain() on linked streams snd_pcm_drain() uses init_waitqueue_entry which does not clear entry.prev/next, and add_wait_queue with a conditional remove_wait_queue that is skipped when to_check is no longer in the group after concurrent UNLINK. The orphaned wait entry remains on the unlinked substream sleep queue. On the next drain iteration, add_wait_queue adds the entry to a new queue while still linked on the old one, corrupting both lists. A subsequent wake_up dereferences NULL at the func pointer (mapped from the spinlock at offset 0 of the misinterpreted wait_queue_head_t), causing a kernel panic. Replace init_waitqueue_entry/add_wait_queue/conditional remove_wait_queue with init_wait_entry/prepare_to_wait/ finish_wait. init_wait_entry clears prev/next via INIT_LIST_HEAD on each iteration and sets autoremove_wake_function which auto-removes the entry on wake-up. finish_wait safely handles both the already-removed and still-queued cases. | |||||
| CVE-2026-53243 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: rseq: Fix using an uninitialized stack variable in rseq_exit_user_update() There is an bug in which an uninitialized stack variable is used in rseq_exit_user_update() as reported by syzbot: BUG: KMSAN: kernel-infoleak in rseq_set_ids_get_csaddr include/linux/rseq_entry.h:502 [inline] The local variable: struct rseq_ids ids = { .cpu_id = task_cpu(t), .mm_cid = task_mm_cid(t), .node_id = cpu_to_node(ids.cpu_id), }; According to the C standard, the evaluation order of expressions in an initializer list is indeterminately sequenced. The compiler (Clang, in this KMSAN build) evaluates `cpu_to_node(ids.cpu_id)` *before* `ids.cpu_id` is initialized with `task_cpu(t)`. This is fixed by moving the assignment of ids.node_id outside the structure initialization. | |||||
| CVE-2026-53244 | 1 Linux | 1 Linux Kernel | 2026-07-07 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: VFS: fix possible failure to unlock in nfsd4_create_file() atomic_create() in fs/namei.c drops the reference to the dentry when it returns an error. This behaviour was imported into dentry_create() so that it will drop the reference if an error is returned from atomic_create(), though not if vfs_create() returns an error (in the case where ->atomic_create is not supported). The caller - nfsd4_create_file() - is made aware of this by checking path->dentry, which will either be a counted reference to a dentry, or an error pointer. However the change to use start_creating()/end_creating() (which landed shortly before the dentry_create() change landed, though was likely developed around the same time) means that nfsd4_create_file() *needs* a valid dentry so that it can unlock the parent. The net result is that if NFSD exports a filesystem which uses ->atomic_create, and if a call to ->atomic_create returns an error, then nfsd4_create_file() will pass an error pointer to end_creating() and the parent will not be unlocked. Fix this by changing dentry_create() to make sure path->dentry is always a valid dentry, never an error-pointer. The actual error is already returned a different way. Note that if ->atomic_create() returns a different dentry (which may not be possible in practice) we are guaranteed (because it is only ever provided by d_spliace_alias()) that it will have the same d_parent and so it will have the same effect when passed to end_creating(). | |||||