Total
35990 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-45985 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O When allocating blocks during within-EOF DIO and writeback with dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was set when calling ext4_split_convert_extents(), which may potentially result in stale data issues. Assume we have an unwritten extent, and then DIO writes the second half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, ext4_iomap_alloc() call ext4_map_blocks() with EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the above flags set. Then, ext4_split_convert_extents() calls ext4_split_extent() with EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2 flags set, and it calls ext4_split_extent_at() to split the second half with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at() failed to insert extent since a temporary lack -ENOSPC. It zeroes out the first half but convert the entire on-disk extent to written since the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten in the extent status tree. [0000000000SSSSSS] data S: stale data, 0: zeroed [WWWWWWWWWWWWWWWW] on-disk extent W: written extent [WWWWWWWWWWUUUUUU] extent status tree Finally, if the DIO failed to write data to the disk, the stale data in the second half will be exposed once the cached extent entry is gone. Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting an unwritten extent before submitting I/O, and make ext4_split_convert_extents() to zero out the entire extent range to zero for this case, and also mark the extent in the extent status tree for consistency. | |||||
| CVE-2026-45983 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: never defer requests during idmap lookup During v4 request compound arg decoding, some ops (e.g. SETATTR) can trigger idmap lookup upcalls. When those upcall responses get delayed beyond the allowed time limit, cache_check() will mark the request for deferral and cause it to be dropped. This prevents nfs4svc_encode_compoundres from being executed, and thus the session slot flag NFSD4_SLOT_INUSE never gets cleared. Subsequent client requests will fail with NFSERR_JUKEBOX, given that the slot will be marked as in-use, making the SEQUENCE op fail. Fix this by making sure that the RQ_USEDEFERRAL flag is always clear during nfs4svc_decode_compoundargs(), since no v4 request should ever be deferred. | |||||
| CVE-2026-45979 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: clean up the amdgpu_cs_parser_bos In low memory conditions, kmalloc can fail. In such conditions unlock the mutex for a clean exit. We do not need to amdgpu_bo_list_put as it's been handled in the amdgpu_cs_parser_fini. | |||||
| CVE-2026-45977 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fbnic: close fw_log race between users and teardown Fixes a theoretical race on fw_log between the teardown path and fw_log write functions. fw_log is written inside fbnic_fw_log_write() and can be reached from the mailbox handler fbnic_fw_msix_intr(), but fw_log is freed before IRQ/MBX teardown during cleanup, resulting in a potential data race of dereferencing a freed/null variable. Possible Interleaving Scenario: CPU0: fbnic_fw_msix_intr() // Entry fbnic_fw_log_write() if (fbnic_fw_log_ready()) // true ... preempt ... CPU1: fbnic_remove() // Entry fbnic_fw_log_free() vfree(log->data_start); log->data_start = NULL; CPU0: continues, walks log->entries or writes to log->data_start The initialization also has an incorrect order problem, as the fw_log is currently allocated after MBX setup during initialization. Fix the problems by adjusting the synchronization order to put initialization in place before the mailbox is enabled, and not cleared until after the mailbox has been disabled. | |||||
| CVE-2026-45975 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ublk: use READ_ONCE() to read struct ublksrv_ctrl_cmd struct ublksrv_ctrl_cmd is part of the io_uring_sqe, which may lie in userspace-mapped memory. It's racy to access its fields with normal loads, as userspace may write to them concurrently. Use READ_ONCE() to copy the ublksrv_ctrl_cmd from the io_uring_sqe to the stack. Use the local copy in place of the one in the io_uring_sqe. | |||||
| CVE-2026-45974 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid leaf access in btrfs_quota_enable() if ref key not found If btrfs_search_slot_for_read() returns 1, it means we did not find any key greater than or equals to the key we asked for, meaning we have reached the end of the tree and therefore the path is not valid. If this happens we need to break out of the loop and stop, instead of continuing and accessing an invalid path. | |||||
| CVE-2026-45973 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix UMR hang in LAG error state unload During firmware reset in LAG mode, a race condition causes the driver to hang indefinitely while waiting for UMR completion during device unload. See [1]. In LAG mode the bond device is only registered on the master, so it never sees sys_error events from the slave. During firmware reset this causes UMR waits to hang forever on unload as the slave is dead but the master hasn't entered error state yet, so UMR posts succeed but completions never arrive. Fix this by adding a sys_error notifier that gets registered before MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device(). This ensures error events reach the bond device throughout teardown. [1] Call Trace: __schedule+0x2bd/0x760 schedule+0x37/0xa0 schedule_preempt_disabled+0xa/0x10 __mutex_lock.isra.6+0x2b5/0x4a0 __mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib] ? __xa_erase+0x4a/0xa0 ? _cond_resched+0x15/0x30 ? wait_for_completion+0x31/0x100 ib_dereg_mr_user+0x48/0xc0 [ib_core] ? rdmacg_uncharge_hierarchy+0xa0/0x100 destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs] uverbs_destroy_uobject+0x37/0x150 [ib_uverbs] __uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs] uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs] remove_client_context+0x8b/0xd0 [ib_core] disable_device+0x8c/0x130 [ib_core] __ib_unregister_device+0x10d/0x180 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] __mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib] auxiliary_bus_remove+0x1e/0x30 device_release_driver_internal+0x103/0x1f0 bus_remove_device+0xf7/0x170 device_del+0x181/0x410 mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core] mlx5_disable_lag+0x253/0x260 [mlx5_core] mlx5_lag_disable_change+0x89/0xc0 [mlx5_core] mlx5_eswitch_disable+0x67/0xa0 [mlx5_core] mlx5_unload+0x15/0xd0 [mlx5_core] mlx5_unload_one+0x71/0xc0 [mlx5_core] mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core] process_one_work+0x1a7/0x360 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x22/0x40 | |||||
| CVE-2026-45971 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Limit bpf program signature size Practical BPF signatures are significantly smaller than KMALLOC_MAX_CACHE_SIZE Allowing larger sizes opens the door for abuse by passing excessive size values and forcing the kernel into expensive allocation paths (via kmalloc_large or vmalloc). | |||||
| CVE-2026-45967 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Return proper address for non-zero offsets in insn array The map_direct_value_addr() function of the instruction array map incorrectly adds offset to the resulting address. This is a bug, because later the resolve_pseudo_ldimm64() function adds the offset. Fix it. Corresponding selftests are added in a consequent commit. | |||||
| CVE-2026-45962 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ublk: Validate SQE128 flag before accessing the cmd ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before IO_URING_F_SQE128 flag check. This could cause out of boundary memory access. Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return -EINVAL immediately if the flag is not set. | |||||
| CVE-2026-45955 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout When llbitmap_suspend_timeout() times out waiting for percpu_ref to become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref. The caller (md_llbitmap_daemon_fn) then continues to the next page without calling llbitmap_resume(), leaving the percpu_ref in a killed state permanently. Fix this by resurrecting the percpu_ref before returning the error, ensuring the page control structure remains usable for subsequent operations. | |||||
| CVE-2026-45953 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix IO hang with degraded array with llbitmap When llbitmap bit state is still unwritten, any new write should force rcw, as bitmap_ops->blocks_synced() is checked in handle_stripe_dirtying(). However, later the same check is missing in need_this_block(), causing stripe to deadloop during handling because handle_stripe() will decide to go to handle_stripe_fill(), meanwhile need_this_block() always return 0 and nothing is handled. | |||||
| CVE-2026-45952 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Add validation for MTU changes Increasing the MTU beyond the HDS threshold causes the hardware to fragment packets across multiple buffers. If a single-buffer XDP program is attached, the driver will drop all multi-frag frames. While we can't prevent a remote sender from sending non-TCP packets larger than the MTU, this will prevent users from inadvertently breaking new TCP streams. Traditionally, drivers supported XDP with MTU less than 4Kb (packet per page). Fbnic currently prevents attaching XDP when MTU is too high. But it does not prevent increasing MTU after XDP is attached. | |||||
| CVE-2026-45492 | 1 Microsoft | 1 Edge Chromium | 2026-06-17 | N/A | 5.4 MEDIUM |
| Improper input validation in Microsoft Edge (Chromium-based) allows an unauthorized attacker to bypass a security feature over a network. | |||||
| CVE-2026-44852 | 1 Arubanetworks | 2 Arubaos, Sd-wan | 2026-06-17 | N/A | 7.2 HIGH |
| An authenticated remote code execution vulnerability exists in the AOS-8 and AOS-10 web-based management interface. A vulnerability in the certificate download functionality could allow an authenticated remote attacker to overwrite arbitrary files on the underlying operating system by exploiting improper input validation in the file path parameter. Successful exploitation could allow the attacker to execute arbitrary commands on the underlying operating system as a privileged user. | |||||
| CVE-2026-44738 | 1 Getgrav | 1 Grav | 2026-06-17 | N/A | 7.7 HIGH |
| Grav is a file-based Web platform. Prior to 2.0.0-rc.2, the Twig sandbox allow-list permits any user with the admin.pages role to call config.toArray() from within a page body, dumping the entire merged site configuration — including all plugin secrets (SMTP passwords, AWS keys, OAuth client secrets, API tokens) — into the rendered HTML. No administrator privileges are required. This vulnerability is fixed in 2.0.0-rc.2. | |||||
| CVE-2026-44551 | 1 Openwebui | 1 Open Webui | 2026-06-17 | N/A | 9.1 CRITICAL |
| Open WebUI is a self-hosted artificial intelligence platform designed to operate entirely offline. Prior to 0.9.0, the LDAP authentication endpoint does not validate that the submitted password is non-empty before performing a Simple Bind against the LDAP server. The LdapForm Pydantic model accepts password: str with no minimum length constraint, so an empty string passes validation. The subsequent Connection.bind() call succeeds on vulnerable LDAP servers, and the application issues a full session token for the target user. This vulnerability is fixed in 0.9.0. | |||||
| CVE-2026-44407 | 1 Zte | 1 Zxcloud Irai | 2026-06-17 | N/A | 4.7 MEDIUM |
| A remote denial-of-service vulnerability exists in the ZTE Cloud PC client uSmartview, which may lead to memory corruption and remote denial of service. | |||||
| CVE-2026-44224 | 1 Requarks | 1 Wiki.js | 2026-06-17 | N/A | 8.8 HIGH |
| Wiki.js is an open source wiki app built on Node.js. Prior to 2.5.313, the users.update GraphQL mutation accepts an arbitrary groups array and applies it directly to the database with no validation of the group IDs supplied. The resolver passes the caller's arguments straight to the model without any ownership check or restriction on which groups can be assigned. A user with manage:users — a permission typically delegated to wiki moderators for account management — can set groups:[1] on their own account to self-assign to the Administrators group. After re-authentication, the fresh JWT carries manage:system, granting full site administrator access in a single mutation call. This vulnerability is fixed in 2.5.313. | |||||
| CVE-2026-43475 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix scheduling while atomic on PREEMPT_RT This resolves the follow splat and lock-up when running with PREEMPT_RT enabled on Hyper-V: [ 415.140818] BUG: scheduling while atomic: stress-ng-iomix/1048/0x00000002 [ 415.140822] INFO: lockdep is turned off. [ 415.140823] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec ghash_clmulni_intel aesni_intel rapl binfmt_misc nls_ascii nls_cp437 vfat fat snd_pcm hyperv_drm snd_timer drm_client_lib drm_shmem_helper snd sg soundcore drm_kms_helper pcspkr hv_balloon hv_utils evdev joydev drm configfs efi_pstore nfnetlink vsock_loopback vmw_vsock_virtio_transport_common hv_sock vmw_vsock_vmci_transport vsock vmw_vmci efivarfs autofs4 ext4 crc16 mbcache jbd2 sr_mod sd_mod cdrom hv_storvsc serio_raw hid_generic scsi_transport_fc hid_hyperv scsi_mod hid hv_netvsc hyperv_keyboard scsi_common [ 415.140846] Preemption disabled at: [ 415.140847] [<ffffffffc0656171>] storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc] [ 415.140854] CPU: 8 UID: 0 PID: 1048 Comm: stress-ng-iomix Not tainted 6.19.0-rc7 #30 PREEMPT_{RT,(full)} [ 415.140856] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/04/2024 [ 415.140857] Call Trace: [ 415.140861] <TASK> [ 415.140861] ? storvsc_queuecommand+0x2e1/0xbe0 [hv_storvsc] [ 415.140863] dump_stack_lvl+0x91/0xb0 [ 415.140870] __schedule_bug+0x9c/0xc0 [ 415.140875] __schedule+0xdf6/0x1300 [ 415.140877] ? rtlock_slowlock_locked+0x56c/0x1980 [ 415.140879] ? rcu_is_watching+0x12/0x60 [ 415.140883] schedule_rtlock+0x21/0x40 [ 415.140885] rtlock_slowlock_locked+0x502/0x1980 [ 415.140891] rt_spin_lock+0x89/0x1e0 [ 415.140893] hv_ringbuffer_write+0x87/0x2a0 [ 415.140899] vmbus_sendpacket_mpb_desc+0xb6/0xe0 [ 415.140900] ? rcu_is_watching+0x12/0x60 [ 415.140902] storvsc_queuecommand+0x669/0xbe0 [hv_storvsc] [ 415.140904] ? HARDIRQ_verbose+0x10/0x10 [ 415.140908] ? __rq_qos_issue+0x28/0x40 [ 415.140911] scsi_queue_rq+0x760/0xd80 [scsi_mod] [ 415.140926] __blk_mq_issue_directly+0x4a/0xc0 [ 415.140928] blk_mq_issue_direct+0x87/0x2b0 [ 415.140931] blk_mq_dispatch_queue_requests+0x120/0x440 [ 415.140933] blk_mq_flush_plug_list+0x7a/0x1a0 [ 415.140935] __blk_flush_plug+0xf4/0x150 [ 415.140940] __submit_bio+0x2b2/0x5c0 [ 415.140944] ? submit_bio_noacct_nocheck+0x272/0x360 [ 415.140946] submit_bio_noacct_nocheck+0x272/0x360 [ 415.140951] ext4_read_bh_lock+0x3e/0x60 [ext4] [ 415.140995] ext4_block_write_begin+0x396/0x650 [ext4] [ 415.141018] ? __pfx_ext4_da_get_block_prep+0x10/0x10 [ext4] [ 415.141038] ext4_da_write_begin+0x1c4/0x350 [ext4] [ 415.141060] generic_perform_write+0x14e/0x2c0 [ 415.141065] ext4_buffered_write_iter+0x6b/0x120 [ext4] [ 415.141083] vfs_write+0x2ca/0x570 [ 415.141087] ksys_write+0x76/0xf0 [ 415.141089] do_syscall_64+0x99/0x1490 [ 415.141093] ? rcu_is_watching+0x12/0x60 [ 415.141095] ? finish_task_switch.isra.0+0xdf/0x3d0 [ 415.141097] ? rcu_is_watching+0x12/0x60 [ 415.141098] ? lock_release+0x1f0/0x2a0 [ 415.141100] ? rcu_is_watching+0x12/0x60 [ 415.141101] ? finish_task_switch.isra.0+0xe4/0x3d0 [ 415.141103] ? rcu_is_watching+0x12/0x60 [ 415.141104] ? __schedule+0xb34/0x1300 [ 415.141106] ? hrtimer_try_to_cancel+0x1d/0x170 [ 415.141109] ? do_nanosleep+0x8b/0x160 [ 415.141111] ? hrtimer_nanosleep+0x89/0x100 [ 415.141114] ? __pfx_hrtimer_wakeup+0x10/0x10 [ 415.141116] ? xfd_validate_state+0x26/0x90 [ 415.141118] ? rcu_is_watching+0x12/0x60 [ 415.141120] ? do_syscall_64+0x1e0/0x1490 [ 415.141121] ? do_syscall_64+0x1e0/0x1490 [ 415.141123] ? rcu_is_watching+0x12/0x60 [ 415.141124] ? do_syscall_64+0x1e0/0x1490 [ 415.141125] ? do_syscall_64+0x1e0/0x1490 [ 415.141127] ? irqentry_exit+0x140/0 ---truncated--- | |||||