Total
35992 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53232 | 1 Linux | 1 Linux Kernel | 2026-07-16 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: clean the sfp upstream if phy probing fails Sashiko reported that we don't call sfp_bus_del_upstream() in the probe failure path, so let's add it, otherwise the sfp-bus is left with a dangling 'upstream' field, that may be used later on during SFP events. This issue existed before the generic phylib sfp support, back when drivers were calling phy_sfp_probe themselves. | |||||
| CVE-2026-53031 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Validate node_id in arena_alloc_pages() arena_alloc_pages() accepts a plain int node_id and forwards it through the entire allocation chain without any bounds checking. Validate node_id before passing it down the allocation chain in arena_alloc_pages(). | |||||
| CVE-2026-53026 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: fix nfs4_file access extra count in nfsd4_add_rdaccess_to_wrdeleg In nfsd4_add_rdaccess_to_wrdeleg, if fp->fi_fds[O_RDONLY] is already set by another thread, __nfs4_file_get_access should not be called to increment the nfs4_file access count since that was already done by the thread that added READ access to the file. The extra fi_access count in nfs4_file can prevent the corresponding nfsd_file from being freed. When stopping nfs-server service, these extra access counts trigger a BUG in kmem_cache_destroy() that shows nfsd_file object remaining on __kmem_cache_shutdown. This problem can be reproduced by running the Git project's test suite over NFS. | |||||
| CVE-2026-24734 | 1 Apache | 2 Tomcat, Tomcat Native | 2026-07-15 | N/A | 7.5 HIGH |
| Improper Input Validation vulnerability in Apache Tomcat Native, Apache Tomcat. When using an OCSP responder, Tomcat Native (and Tomcat's FFM port of the Tomcat Native code) did not complete verification or freshness checks on the OCSP response which could allow certificate revocation to be bypassed. This issue affects Apache Tomcat Native: from 1.3.0 through 1.3.4, from 2.0.0 through 2.0.11; Apache Tomcat: from 11.0.0-M1 through 11.0.17, from 10.1.0-M7 through 10.1.51, from 9.0.83 through 9.0.114. The following versions were EOL at the time the CVE was created but are known to be affected: from 1.1.23 through 1.1.34, from 1.2.0 through 1.2.39. Older EOL versions are not affected. Apache Tomcat Native users are recommended to upgrade to versions 1.3.5 or later or 2.0.12 or later, which fix the issue. Apache Tomcat users are recommended to upgrade to versions 11.0.18 or later, 10.1.52 or later or 9.0.115 or later which fix the issue. | |||||
| CVE-2026-53022 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: bound enumeration string aggregation populate_enum_data() aggregates firmware-provided value-modifier and possible-value strings into fixed 512-byte struct members. The current code bounds each individual source string but then appends every string and separator with raw strcat() and no remaining-space check. Switch the aggregation loops to a bounded append helper and reject enumeration packages whose combined strings do not fit in the destination buffers. [ij: add include] | |||||
| CVE-2026-53023 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: terminate the cached volume label after UTF-8 conversion ntfs_fill_super() loads the on-disk volume label with utf16s_to_utf8s() and stores the result in sbi->volume.label. The converted label is later exposed through ntfs3_label_show() using %s, but utf16s_to_utf8s() only returns the number of bytes written and does not add a trailing NUL. If the converted label fills the entire fixed buffer, ntfs3_label_show() can read past the end of sbi->volume.label while looking for a terminator. Terminate the cached label explicitly after a successful conversion and clamp the exact-full case to the last byte of the buffer. | |||||
| CVE-2026-53014 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: fix wrong device for mac_header_xmit check in tcf_blockcast_redir In tcf_blockcast_redir(), when iterating block ports to redirect packets to multiple devices, the mac_header_xmit flag is queried from the wrong device. The loop sends to dev_prev but queries dev_is_mac_header_xmit(dev) — which is the NEXT device in the iteration, not the one being sent to. This causes tcf_mirred_to_dev() to make incorrect decisions about whether to push or pull the MAC header. When the block contains mixed device types (e.g., an ethernet veth and a tunnel device), intermediate devices get the wrong mac_header_xmit flag, leading to skb header corruption. In the worst case, skb_push_rcsum with an incorrect mac_len can exhaust headroom and panic. The last device in the loop is handled correctly (line 365-366 uses dev_is_mac_header_xmit(dev_prev)), confirming this is a copy-paste oversight for the intermediate devices. Fix by using dev_prev instead of dev for the mac_header_xmit query, consistent with the device actually being sent to. | |||||
| CVE-2026-53015 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: erofs: unify lcn as u64 for 32-bit platforms As sashiko reported [1], `lcn` was typed as `unsigned long` (or `unsigned int` sometimes), which is only 32 bits wide on 32-bit platforms, which causes `(lcn << lclusterbits)` to be truncated at 4 GiB. In order to consolidate the logic, just use `u64` consistently around the codebase. [1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com | |||||
| CVE-2026-53017 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix data loss caused by incorrect use of nat_entry flag Data loss can occur when fsync is performed on a newly created file (before any checkpoint has been written) concurrently with a checkpoint operation. The scenario is as follows: create & write & fsync 'file A' write checkpoint - f2fs_do_sync_file // inline inode - f2fs_write_inode // inode folio is dirty - f2fs_write_checkpoint - f2fs_flush_merged_writes - f2fs_sync_node_pages - f2fs_flush_nat_entries - f2fs_fsync_node_pages // no dirty node - f2fs_need_inode_block_update // return false SPO and lost 'file A' f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNC flags for the nat_entry, but this does not mean that the checkpoint has actually completed successfully. However, f2fs_need_inode_block_update() checks these flags and incorrectly assumes that the checkpoint has finished. The root cause is that the semantics of IS_CHECKPOINTED and HAS_LAST_FSYNC are only guaranteed after the checkpoint write fully completes. This patch modifies f2fs_need_inode_block_update() to acquire the sbi->node_write lock before reading the nat_entry flags, ensuring that once IS_CHECKPOINTED and HAS_LAST_FSYNC are observed to be set, the checkpoint operation has already completed. | |||||
| CVE-2026-53018 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid reading already updated pages during GC We found the following issue during fuzz testing: page: refcount:3 mapcount:0 mapping:00000000b6e89c65 index:0x18b2dc pfn:0x161ba9 memcg:f8ffff800e269c00 aops:f2fs_meta_aops ino:2 flags: 0x52880000000080a9(locked|waiters|uptodate|lru|private|zone=1|kasantag=0x4a) raw: 52880000000080a9 fffffffec6e17588 fffffffec0ccc088 a7ffff8067063618 raw: 000000000018b2dc 0000000000000009 00000003ffffffff f8ffff800e269c00 page dumped because: VM_BUG_ON_FOLIO(folio_test_uptodate(folio)) page_owner tracks the page as allocated post_alloc_hook+0x58c/0x5ec prep_new_page+0x34/0x284 get_page_from_freelist+0x2dcc/0x2e8c __alloc_pages_noprof+0x280/0x76c __folio_alloc_noprof+0x18/0xac __filemap_get_folio+0x6bc/0xdc4 pagecache_get_page+0x3c/0x104 do_garbage_collect+0x5c78/0x77a4 f2fs_gc+0xd74/0x25f0 gc_thread_func+0xb28/0x2930 kthread+0x464/0x5d8 ret_from_fork+0x10/0x20 ------------[ cut here ]------------ kernel BUG at mm/filemap.c:1563! folio_end_read+0x140/0x168 f2fs_finish_read_bio+0x5c4/0xb80 f2fs_read_end_io+0x64c/0x708 bio_endio+0x85c/0x8c0 blk_update_request+0x690/0x127c scsi_end_request+0x9c/0xb8c scsi_io_completion+0xf0/0x250 scsi_finish_command+0x430/0x45c scsi_complete+0x178/0x6d4 blk_mq_complete_request+0xcc/0x104 scsi_done_internal+0x214/0x454 scsi_done+0x24/0x34 which is similar to the problem reported by syzbot: https://syzkaller.appspot.com/bug?extid=3686758660f980b402dc This case is consistent with the description in commit 9bf1a3f ("f2fs: avoid GC causing encrypted file corrupted"): Page 1 is moved from blkaddr A to blkaddr B by move_data_block, and after being written it is marked as uptodate. Then, Page 1 is moved from blkaddr B to blkaddr C, VM_BUG_ON_FOLIO was triggered in the endio initiated by ra_data_block. There is no need to read Page 1 again from blkaddr B, since it has already been updated. Therefore, avoid initiating I/O in this case. | |||||
| CVE-2026-53019 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: clk: spacemit: ccu_mix: fix inverted condition in ccu_mix_trigger_fc() Fix inverted condition that skips frequency change trigger, causing kernel panics during cpufreq scaling. | |||||
| CVE-2026-52995 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: zero per-item info buffer before handing it to visitors rds_for_each_conn_info() and rds_walk_conn_path_info() both hand a caller-allocated on-stack u64 buffer to a per-connection visitor and then copy the full item_len bytes back to user space via rds_info_copy() regardless of how much of the buffer the visitor actually wrote. rds_ib_conn_info_visitor() and rds6_ib_conn_info_visitor() only write a subset of their output struct when the underlying rds_connection is not in state RDS_CONN_UP (src/dst addr, tos, sl and the two GIDs via explicit memsets). Several u32 fields (max_send_wr, max_recv_wr, max_send_sge, rdma_mr_max, rdma_mr_size, cache_allocs) and the 2-byte alignment hole between sl and cache_allocs remain as whatever stack contents preceded the visitor call and are then memcpy_to_user()'d out to user space. struct rds_info_rdma_connection and struct rds6_info_rdma_connection are the only rds_info_* structs in include/uapi/linux/rds.h that are not marked __attribute__((packed)), so they have a real alignment hole. The other info visitors (rds_conn_info_visitor, rds6_conn_info_visitor, rds_tcp_tc_info, ...) write all fields of their packed output struct today and are not known to be vulnerable, but a future visitor that adds a conditional write-path would have the same bug. Reproduction on a kernel built without CONFIG_INIT_STACK_ALL_ZERO=y: a local unprivileged user opens AF_RDS, sets SO_RDS_TRANSPORT=IB, binds to a local address on an RDMA-capable netdev (rxe soft-RoCE on any netdev is sufficient), sendto()'s any peer on the same subnet (fails cleanly but installs an rds_connection in the global hash in RDS_CONN_CONNECTING), then calls getsockopt(SOL_RDS, RDS_INFO_IB_CONNECTIONS). The returned 68-byte item contains 26 bytes of stack garbage including kernel text/data pointers: 0..7 0a 63 00 01 0a 63 00 02 src=10.99.0.1 dst=10.99.0.2 8..39 00 ... gids (memset-zeroed) 40..47 e0 92 a3 81 ff ff ff ff kernel pointer (max_send_wr) 48..55 7f 37 b5 81 ff ff ff ff kernel pointer (rdma_mr_max) 56..59 01 00 08 00 rdma_mr_size (garbage) 60..61 00 00 tos, sl 62..63 00 00 alignment padding 64..67 18 00 00 00 cache_allocs (garbage) Fix by zeroing the per-item buffer in both rds_for_each_conn_info() and rds_walk_conn_path_info() before invoking the visitor. This covers the IPv4/IPv6 IB visitors and hardens all current and future visitors against the same class of bug. No functional change for visitors that fully populate their output. Changes in v2: - retarget at the net tree (subject prefix "[PATCH net v2]", net/rds: prefix in the title) - pick up Reviewed-by tags from Sharath Srinivasan and Allison Henderson | |||||
| CVE-2026-4700 | 1 Mozilla | 1 Firefox | 2026-07-15 | N/A | 9.8 CRITICAL |
| Mitigation bypass in the Networking: HTTP component. This vulnerability was fixed in Firefox 149, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9. | |||||
| CVE-2026-4692 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-15 | N/A | 10.0 CRITICAL |
| Sandbox escape in the Responsive Design Mode component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9. | |||||
| CVE-2026-46176 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init() mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When ib_create_srq() fails for s1, the error branch destroys s0 but falls through and unconditionally assigns the freed s0 and the ERR_PTR s1 to devr->s0 and devr->s1. This leads to several problems: the lock-free fast path checks "if (devr->s1) return 0;" and treats the ERR_PTR as already initialised; users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences the ERR_PTR and double-frees s0 on teardown. Fix by adding the same `goto unlock` in the s1 failure path. | |||||
| CVE-2026-46145 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Validate rx_hash_key_len Sashiko points out that rx_hash_key_len comes from a uAPI structure and is blindly passed to memcpy, allowing the userspace to trash kernel memory. Bounds check it so the memcpy cannot overflow. | |||||
| CVE-2026-45898 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix workqueue list corruption by removing work_list The commit e1168f0 ("RDMA/iwcm: Simplify cm_event_handler()") changed the work submission logic to unconditionally call queue_work() with the expectation that queue_work() would have no effect if work was already pending. The problem is that a free list of struct iwcm_work is used (for which struct work_struct is embedded), so each call to queue_work() is basically unique and therefore does indeed queue the work. This causes a problem in the work handler which walks the work_list until it's empty to process entries. This means that a single run of the work handler could process item N+1 and release it back to the free list while the actual workqueue entry is still queued. It could then get reused (INIT_WORK...) and lead to list corruption in the workqueue logic. Fix this by just removing the work_list. The workqueue already does this for us. This fixes the following error that was observed when stress testing with ucmatose on an Intel E830 in iWARP mode: [ 151.465780] list_del corruption. next->prev should be ffff9f0915c69c08, but was ffff9f0a1116be08. (next=ffff9f0a15b11c08) [ 151.466639] ------------[ cut here ]------------ [ 151.466986] kernel BUG at lib/list_debug.c:67! [ 151.467349] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 151.467753] CPU: 14 UID: 0 PID: 2306 Comm: kworker/u64:18 Not tainted 6.19.0-rc4+ #1 PREEMPT(voluntary) [ 151.468466] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 151.469192] Workqueue: 0x0 (iw_cm_wq) [ 151.469478] RIP: 0010:__list_del_entry_valid_or_report+0xf0/0x100 [ 151.469942] Code: c7 58 5f 4c b2 e8 10 50 aa ff 0f 0b 48 89 ef e8 36 57 cb ff 48 8b 55 08 48 89 e9 48 89 de 48 c7 c7 a8 5f 4c b2 e8 f0 4f aa ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 [ 151.471323] RSP: 0000:ffffb15644e7bd68 EFLAGS: 00010046 [ 151.471712] RAX: 000000000000006d RBX: ffff9f0915c69c08 RCX: 0000000000000027 [ 151.472243] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f0a37d9c600 [ 151.472768] RBP: ffff9f0a15b11c08 R08: 0000000000000000 R09: c0000000ffff7fff [ 151.473294] R10: 0000000000000001 R11: ffffb15644e7bba8 R12: ffff9f092339ee68 [ 151.473817] R13: ffff9f0900059c28 R14: ffff9f092339ee78 R15: 0000000000000000 [ 151.474344] FS: 0000000000000000(0000) GS:ffff9f0a847b5000(0000) knlGS:0000000000000000 [ 151.474934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.475362] CR2: 0000559e233a9088 CR3: 000000020296b004 CR4: 0000000000770ef0 [ 151.475895] PKRU: 55555554 [ 151.476118] Call Trace: [ 151.476331] <TASK> [ 151.476497] move_linked_works+0x49/0xa0 [ 151.476792] __pwq_activate_work.isra.46+0x2f/0xa0 [ 151.477151] pwq_dec_nr_in_flight+0x1e0/0x2f0 [ 151.477479] process_scheduled_works+0x1c8/0x410 [ 151.477823] worker_thread+0x125/0x260 [ 151.478108] ? __pfx_worker_thread+0x10/0x10 [ 151.478430] kthread+0xfe/0x240 [ 151.478671] ? __pfx_kthread+0x10/0x10 [ 151.478955] ? __pfx_kthread+0x10/0x10 [ 151.479240] ret_from_fork+0x208/0x270 [ 151.479523] ? __pfx_kthread+0x10/0x10 [ 151.479806] ret_from_fork_asm+0x1a/0x30 [ 151.480103] </TASK> | |||||
| CVE-2026-43133 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.9 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB. | |||||
| CVE-2026-43114 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 9.4 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry New test case fails unexpectedly when avx2 matching functions are used. The test first loads a ranomly generated pipapo set with 'ipv4 . port' key, i.e. nft -f foo. This works. Then, it reloads the set after a flush: (echo flush set t s; cat foo) | nft -f - This is expected to work, because its the same set after all and it was already loaded once. But with avx2, this fails: nft reports a clashing element. The reported clash is of following form: We successfully re-inserted a . b c . d Then we try to insert a . d avx2 finds the already existing a . d, which (due to 'flush set') is marked as invalid in the new generation. It skips the element and moves to next. Due to incorrect masking, the skip-step finds the next matching element *only considering the first field*, i.e. we return the already reinserted "a . b", even though the last field is different and the entry should not have been matched. No such error is reported for the generic c implementation (no avx2) or when the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback. Bisection points to 7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection") but that fix merely uncovers this bug. Before this commit, the wrong element is returned, but erronously reported as a full, identical duplicate. The root-cause is too early return in the avx2 match functions. When we process the last field, we should continue to process data until the entire input size has been consumed to make sure no stale bits remain in the map. | |||||
| CVE-2026-43038 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a fake TLV without checking if the remaining packet length can hold the full 18-byte struct ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err() needs to be changed. A separate patch would be better anyway. | |||||