Total
33308 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-27138 | 1 Denx | 1 U-boot | 2025-11-03 | 6.8 MEDIUM | 7.8 HIGH |
| The boot loader in Das U-Boot before 2021.04-rc2 mishandles use of unit addresses in a FIT. | |||||
| CVE-2021-27097 | 1 Denx | 1 U-boot | 2025-11-03 | 6.8 MEDIUM | 7.8 HIGH |
| The boot loader in Das U-Boot before 2021.04-rc2 mishandles a modified FIT. | |||||
| CVE-2024-9537 | 1 Sciencelogic | 1 Sl1 | 2025-11-03 | N/A | 9.8 CRITICAL |
| ScienceLogic SL1 (formerly EM7) is affected by an unspecified vulnerability involving an unspecified third-party component packaged with SL1. The vulnerability is addressed in SL1 versions 12.1.3+, 12.2.3+, and 12.3+. Remediations have been made available for all SL1 versions back to version lines 10.1.x, 10.2.x, 11.1.x, 11.2.x, and 11.3.x. | |||||
| CVE-2025-22105 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bonding: check xdp prog when set bond mode Following operations can trigger a warning[1]: ip netns add ns1 ip netns exec ns1 ip link add bond0 type bond mode balance-rr ip netns exec ns1 ip link set dev bond0 xdp obj af_xdp_kern.o sec xdp ip netns exec ns1 ip link set bond0 type bond mode broadcast ip netns del ns1 When delete the namespace, dev_xdp_uninstall() is called to remove xdp program on bond dev, and bond_xdp_set() will check the bond mode. If bond mode is changed after attaching xdp program, the warning may occur. Some bond modes (broadcast, etc.) do not support native xdp. Set bond mode with xdp program attached is not good. Add check for xdp program when set bond mode. [1] ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:9912 unregister_netdevice_many_notify+0x8d9/0x930 Modules linked in: CPU: 0 UID: 0 PID: 11 Comm: kworker/u4:0 Not tainted 6.14.0-rc4 #107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:unregister_netdevice_many_notify+0x8d9/0x930 Code: 00 00 48 c7 c6 6f e3 a2 82 48 c7 c7 d0 b3 96 82 e8 9c 10 3e ... RSP: 0018:ffffc90000063d80 EFLAGS: 00000282 RAX: 00000000ffffffa1 RBX: ffff888004959000 RCX: 00000000ffffdfff RDX: 0000000000000000 RSI: 00000000ffffffea RDI: ffffc90000063b48 RBP: ffffc90000063e28 R08: ffffffff82d39b28 R09: 0000000000009ffb R10: 0000000000000175 R11: ffffffff82d09b40 R12: ffff8880049598e8 R13: 0000000000000001 R14: dead000000000100 R15: ffffc90000045000 FS: 0000000000000000(0000) GS:ffff888007a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000d406b60 CR3: 000000000483e000 CR4: 00000000000006f0 Call Trace: <TASK> ? __warn+0x83/0x130 ? unregister_netdevice_many_notify+0x8d9/0x930 ? report_bug+0x18e/0x1a0 ? handle_bug+0x54/0x90 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? unregister_netdevice_many_notify+0x8d9/0x930 ? bond_net_exit_batch_rtnl+0x5c/0x90 cleanup_net+0x237/0x3d0 process_one_work+0x163/0x390 worker_thread+0x293/0x3b0 ? __pfx_worker_thread+0x10/0x10 kthread+0xec/0x1e0 ? __pfx_kthread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2025-22106 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vmxnet3: unregister xdp rxq info in the reset path vmxnet3 does not unregister xdp rxq info in the vmxnet3_reset_work() code path as vmxnet3_rq_destroy() is not invoked in this code path. So, we get below message with a backtrace. Missing unregister, handled but fix driver WARNING: CPU:48 PID: 500 at net/core/xdp.c:182 __xdp_rxq_info_reg+0x93/0xf0 This patch fixes the problem by moving the unregister code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup(). | |||||
| CVE-2025-22108 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Mask the bd_cnt field in the TX BD properly The bd_cnt field in the TX BD specifies the total number of BDs for the TX packet. The bd_cnt field has 5 bits and the maximum number supported is 32 with the value 0. CONFIG_MAX_SKB_FRAGS can be modified and the total number of SKB fragments can approach or exceed the maximum supported by the chip. Add a macro to properly mask the bd_cnt field so that the value 32 will be properly masked and set to 0 in the bd_cnd field. Without this patch, the out-of-range bd_cnt value will corrupt the TX BD and may cause TX timeout. The next patch will check for values exceeding 32. | |||||
| CVE-2025-22111 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: Remove RTNL dance for SIOCBRADDIF and SIOCBRDELIF. SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to br_ioctl_call(), which causes unnecessary RTNL dance and the splat below [0] under RTNL pressure. Let's say Thread A is trying to detach a device from a bridge and Thread B is trying to remove the bridge. In dev_ioctl(), Thread A bumps the bridge device's refcnt by netdev_hold() and releases RTNL because the following br_ioctl_call() also re-acquires RTNL. In the race window, Thread B could acquire RTNL and try to remove the bridge device. Then, rtnl_unlock() by Thread B will release RTNL and wait for netdev_put() by Thread A. Thread A, however, must hold RTNL after the unlock in dev_ifsioc(), which may take long under RTNL pressure, resulting in the splat by Thread B. Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR) ---------------------- ---------------------- sock_ioctl sock_ioctl `- sock_do_ioctl `- br_ioctl_call `- dev_ioctl `- br_ioctl_stub |- rtnl_lock | |- dev_ifsioc ' ' |- dev = __dev_get_by_name(...) |- netdev_hold(dev, ...) . / |- rtnl_unlock ------. | | |- br_ioctl_call `---> |- rtnl_lock Race | | `- br_ioctl_stub |- br_del_bridge Window | | | |- dev = __dev_get_by_name(...) | | | May take long | `- br_dev_delete(dev, ...) | | | under RTNL pressure | `- unregister_netdevice_queue(dev, ...) | | | | `- rtnl_unlock \ | |- rtnl_lock <-' `- netdev_run_todo | |- ... `- netdev_run_todo | `- rtnl_unlock |- __rtnl_unlock | |- netdev_wait_allrefs_any |- netdev_put(dev, ...) <----------------' Wait refcnt decrement and log splat below To avoid blocking SIOCBRDELBR unnecessarily, let's not call dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF. In the dev_ioctl() path, we do the following: 1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl() 2. Check CAP_NET_ADMIN in dev_ioctl() 3. Call dev_load() in dev_ioctl() 4. Fetch the master dev from ifr.ifr_name in dev_ifsioc() 3. can be done by request_module() in br_ioctl_call(), so we move 1., 2., and 4. to br_ioctl_stub(). Note that 2. is also checked later in add_del_if(), but it's better performed before RTNL. SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since the pre-git era, and there seems to be no specific reason to process them there. [0]: unregister_netdevice: waiting for wpan3 to become free. Usage count = 2 ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4282 [inline] netdev_hold include/linux/netdevice.h:4311 [inline] dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624 dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826 sock_do_ioctl+0x1ca/0x260 net/socket.c:1213 sock_ioctl+0x23a/0x6c0 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f | |||||
| CVE-2025-22113 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid journaling sb update on error if journal is destroying Presently we always BUG_ON if trying to start a transaction on a journal marked with JBD2_UNMOUNT, since this should never happen. However, while ltp running stress tests, it was observed that in case of some error handling paths, it is possible for update_super_work to start a transaction after the journal is destroyed eg: (umount) ext4_kill_sb kill_block_super generic_shutdown_super sync_filesystem /* commits all txns */ evict_inodes /* might start a new txn */ ext4_put_super flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */ jbd2_journal_destroy journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; jbd2_journal_commit_transaction jbd2_journal_get_descriptor_buffer jbd2_journal_bmap ext4_journal_bmap ext4_map_blocks ... ext4_inode_error ext4_handle_error schedule_work(&sbi->s_sb_upd_work) /* work queue kicks in */ update_super_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT) Hence, introduce a new mount flag to indicate journal is destroying and only do a journaled (and deferred) update of sb if this flag is not set. Otherwise, just fallback to an un-journaled commit. Further, in the journal destroy path, we have the following sequence: 1. Set mount flag indicating journal is destroying 2. force a commit and wait for it 3. flush pending sb updates This sequence is important as it ensures that, after this point, there is no sb update that might be journaled so it is safe to update the sb outside the journal. (To avoid race discussed in 2d01ddc86606) Also, we don't need a similar check in ext4_grp_locked_error since it is only called from mballoc and AFAICT it would be always valid to schedule work here. | |||||
| CVE-2025-22114 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't clobber ret in btrfs_validate_super() Commit 2a9bb78cfd36 ("btrfs: validate system chunk array at btrfs_validate_super()") introduces a call to validate_sys_chunk_array() in btrfs_validate_super(), which clobbers the value of ret set earlier. This has the effect of negating the validity checks done earlier, making it so btrfs could potentially try to mount invalid filesystems. | |||||
| CVE-2025-22116 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: idpf: check error for register_netdev() on init Current init logic ignores the error code from register_netdev(), which will cause WARN_ON() on attempt to unregister it, if there was one, and there is no info for the user that the creation of the netdev failed. WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10 ... [ 3707.563641] unregister_netdev+0x1c/0x30 [ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf] [ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf] [ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf] [ 3707.563739] idpf_remove+0xbf/0x780 [idpf] [ 3707.563769] pci_device_remove+0xab/0x1e0 [ 3707.563786] device_release_driver_internal+0x371/0x530 [ 3707.563803] driver_detach+0xbf/0x180 [ 3707.563816] bus_remove_driver+0x11b/0x2a0 [ 3707.563829] pci_unregister_driver+0x2a/0x250 Introduce an error check and log the vport number and error code. On removal make sure to check VPORT_REG_NETDEV flag prior to calling unregister and free on the netdev. Add local variables for idx, vport_config and netdev for readability. | |||||
| CVE-2025-22117 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix using untrusted value of pkt_len in ice_vc_fdir_parse_raw() Fix using the untrusted value of proto->raw.pkt_len in function ice_vc_fdir_parse_raw() by verifying if it does not exceed the VIRTCHNL_MAX_SIZE_RAW_PACKET value. | |||||
| CVE-2025-22120 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: goto right label 'out_mmap_sem' in ext4_setattr() Otherwise, if ext4_inode_attach_jinode() fails, a hung task will happen because filemap_invalidate_unlock() isn't called to unlock mapping->invalidate_lock. Like this: EXT4-fs error (device sda) in ext4_setattr:5557: Out of memory INFO: task fsstress:374 blocked for more than 122 seconds. Not tainted 6.14.0-rc1-next-20250206-xfstests-dirty #726 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:fsstress state:D stack:0 pid:374 tgid:374 ppid:373 task_flags:0x440140 flags:0x00000000 Call Trace: <TASK> __schedule+0x2c9/0x7f0 schedule+0x27/0xa0 schedule_preempt_disabled+0x15/0x30 rwsem_down_read_slowpath+0x278/0x4c0 down_read+0x59/0xb0 page_cache_ra_unbounded+0x65/0x1b0 filemap_get_pages+0x124/0x3e0 filemap_read+0x114/0x3d0 vfs_read+0x297/0x360 ksys_read+0x6c/0xe0 do_syscall_64+0x4b/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2025-22122 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: block: fix adding folio to bio >4GB folio is possible on some ARCHs, such as aarch64, 16GB hugepage is supported, then 'offset' of folio can't be held in 'unsigned int', cause warning in bio_add_folio_nofail() and IO failure. Fix it by adjusting 'page' & trimming 'offset' so that `->bi_offset` won't be overflow, and folio can be added to bio successfully. | |||||
| CVE-2025-22124 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: fix wrong bitmap_limit for clustermd when write sb In clustermd, separate write-intent-bitmaps are used for each cluster node: 0 4k 8k 12k ------------------------------------------------------------------- | idle | md super | bm super [0] + bits | | bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] | | bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits | | bm bits [3, contd] | | | So in node 1, pg_index in __write_sb_page() could equal to bitmap->storage.file_pages. Then bitmap_limit will be calculated to 0. md_super_write() will be called with 0 size. That means the first 4k sb area of node 1 will never be updated through filemap_write_page(). This bug causes hang of mdadm/clustermd_tests/01r1_Grow_resize. Here use (pg_index % bitmap->storage.file_pages) to make calculation of bitmap_limit correct. | |||||
| CVE-2025-22125 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: don't ignore IO flags If blk-wbt is enabled by default, it's found that raid write performance is quite bad because all IO are throttled by wbt of underlying disks, due to flag REQ_IDLE is ignored. And turns out this behaviour exist since blk-wbt is introduced. Other than REQ_IDLE, other flags should not be ignored as well, for example REQ_META can be set for filesystems, clearing it can cause priority reverse problems; And REQ_NOWAIT should not be cleared as well, because io will wait instead of failing directly in underlying disks. Fix those problems by keep IO flags from master bio. Fises: f51d46d0e7cb ("md: add support for REQ_NOWAIT") | |||||
| CVE-2025-22128 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Clear affinity hint before calling ath12k_pci_free_irq() in error path If a shared IRQ is used by the driver due to platform limitation, then the IRQ affinity hint is set right after the allocation of IRQ vectors in ath12k_pci_msi_alloc(). This does no harm unless one of the functions requesting the IRQ fails and attempt to free the IRQ. This may end up with a warning from the IRQ core that is expecting the affinity hint to be cleared before freeing the IRQ: kernel/irq/manage.c: /* make sure affinity_hint is cleaned up */ if (WARN_ON_ONCE(desc->affinity_hint)) desc->affinity_hint = NULL; So to fix this issue, clear the IRQ affinity hint before calling ath12k_pci_free_irq() in the error path. The affinity will be cleared once again further down the error path due to code organization, but that does no harm. | |||||
| CVE-2025-37925 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: jfs: reject on-disk inodes of an unsupported type Syzbot has reported the following BUG: kernel BUG at fs/inode.c:668! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 UID: 0 PID: 139 Comm: jfsCommit Not tainted 6.12.0-rc4-syzkaller-00085-g4e46774408d9 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 RIP: 0010:clear_inode+0x168/0x190 Code: 4c 89 f7 e8 ba fe e5 ff e9 61 ff ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 7c c1 4c 89 f7 e8 90 ff e5 ff eb b7 0b e8 01 5d 7f ff 90 0f 0b e8 f9 5c 7f ff 90 0f 0b e8 f1 5c 7f RSP: 0018:ffffc900027dfae8 EFLAGS: 00010093 RAX: ffffffff82157a87 RBX: 0000000000000001 RCX: ffff888104d4b980 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffffc900027dfc90 R08: ffffffff82157977 R09: fffff520004fbf38 R10: dffffc0000000000 R11: fffff520004fbf38 R12: dffffc0000000000 R13: ffff88811315bc00 R14: ffff88811315bda8 R15: ffff88811315bb80 FS: 0000000000000000(0000) GS:ffff888135f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005565222e0578 CR3: 0000000026ef0000 CR4: 00000000000006f0 Call Trace: <TASK> ? __die_body+0x5f/0xb0 ? die+0x9e/0xc0 ? do_trap+0x15a/0x3a0 ? clear_inode+0x168/0x190 ? do_error_trap+0x1dc/0x2c0 ? clear_inode+0x168/0x190 ? __pfx_do_error_trap+0x10/0x10 ? report_bug+0x3cd/0x500 ? handle_invalid_op+0x34/0x40 ? clear_inode+0x168/0x190 ? exc_invalid_op+0x38/0x50 ? asm_exc_invalid_op+0x1a/0x20 ? clear_inode+0x57/0x190 ? clear_inode+0x167/0x190 ? clear_inode+0x168/0x190 ? clear_inode+0x167/0x190 jfs_evict_inode+0xb5/0x440 ? __pfx_jfs_evict_inode+0x10/0x10 evict+0x4ea/0x9b0 ? __pfx_evict+0x10/0x10 ? iput+0x713/0xa50 txUpdateMap+0x931/0xb10 ? __pfx_txUpdateMap+0x10/0x10 jfs_lazycommit+0x49a/0xb80 ? _raw_spin_unlock_irqrestore+0x8f/0x140 ? lockdep_hardirqs_on+0x99/0x150 ? __pfx_jfs_lazycommit+0x10/0x10 ? __pfx_default_wake_function+0x10/0x10 ? __kthread_parkme+0x169/0x1d0 ? __pfx_jfs_lazycommit+0x10/0x10 kthread+0x2f2/0x390 ? __pfx_jfs_lazycommit+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x4d/0x80 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> This happens when 'clear_inode()' makes an attempt to finalize an underlying JFS inode of unknown type. According to JFS layout description from https://jfs.sourceforge.net/project/pub/jfslayout.pdf, inode types from 5 to 15 are reserved for future extensions and should not be encountered on a valid filesystem. So add an extra check for valid inode type in 'copy_from_dinode()'. | |||||
| CVE-2025-21816 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: hrtimers: Force migrate away hrtimers queued after CPUHP_AP_HRTIMERS_DYING hrtimers are migrated away from the dying CPU to any online target at the CPUHP_AP_HRTIMERS_DYING stage in order not to delay bandwidth timers handling tasks involved in the CPU hotplug forward progress. However wakeups can still be performed by the outgoing CPU after CPUHP_AP_HRTIMERS_DYING. Those can result again in bandwidth timers being armed. Depending on several considerations (crystal ball power management based election, earliest timer already enqueued, timer migration enabled or not), the target may eventually be the current CPU even if offline. If that happens, the timer is eventually ignored. The most notable example is RCU which had to deal with each and every of those wake-ups by deferring them to an online CPU, along with related workarounds: _ e787644caf76 (rcu: Defer RCU kthreads wakeup when CPU is dying) _ 9139f93209d1 (rcu/nocb: Fix RT throttling hrtimer armed from offline CPU) _ f7345ccc62a4 (rcu/nocb: Fix rcuog wake-up from offline softirq) The problem isn't confined to RCU though as the stop machine kthread (which runs CPUHP_AP_HRTIMERS_DYING) reports its completion at the end of its work through cpu_stop_signal_done() and performs a wake up that eventually arms the deadline server timer: WARNING: CPU: 94 PID: 588 at kernel/time/hrtimer.c:1086 hrtimer_start_range_ns+0x289/0x2d0 CPU: 94 UID: 0 PID: 588 Comm: migration/94 Not tainted Stopper: multi_cpu_stop+0x0/0x120 <- stop_machine_cpuslocked+0x66/0xc0 RIP: 0010:hrtimer_start_range_ns+0x289/0x2d0 Call Trace: <TASK> start_dl_timer enqueue_dl_entity dl_server_start enqueue_task_fair enqueue_task ttwu_do_activate try_to_wake_up complete cpu_stopper_thread Instead of providing yet another bandaid to work around the situation, fix it in the hrtimers infrastructure instead: always migrate away a timer to an online target whenever it is enqueued from an offline CPU. This will also allow to revert all the above RCU disgraceful hacks. | |||||
| CVE-2021-47498 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: dm rq: don't queue request to blk-mq during DM suspend DM uses blk-mq's quiesce/unquiesce to stop/start device mapper queue. But blk-mq's unquiesce may come from outside events, such as elevator switch, updating nr_requests or others, and request may come during suspend, so simply ask for blk-mq to requeue it. Fixes one kernel panic issue when running updating nr_requests and dm-mpath suspend/resume stress test. | |||||
| CVE-2021-47412 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: block: don't call rq_qos_ops->done_bio if the bio isn't tracked rq_qos framework is only applied on request based driver, so: 1) rq_qos_done_bio() needn't to be called for bio based driver 2) rq_qos_done_bio() needn't to be called for bio which isn't tracked, such as bios ended from error handling code. Especially in bio_endio(): 1) request queue is referred via bio->bi_bdev->bd_disk->queue, which may be gone since request queue refcount may not be held in above two cases 2) q->rq_qos may be freed in blk_cleanup_queue() when calling into __rq_qos_done_bio() Fix the potential kernel panic by not calling rq_qos_ops->done_bio if the bio isn't tracked. This way is safe because both ioc_rqos_done_bio() and blkcg_iolatency_done_bio() are nop if the bio isn't tracked. | |||||