Total
36055 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-38572 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: reject malicious packets in ipv6_gso_segment() syzbot was able to craft a packet with very long IPv6 extension headers leading to an overflow of skb->transport_header. This 16bit field has a limited range. Add skb_reset_transport_header_careful() helper and use it from ipv6_gso_segment() WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 skb_reset_transport_header include/linux/skbuff.h:3032 [inline] WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151 Modules linked in: CPU: 0 UID: 0 PID: 5871 Comm: syz-executor211 Not tainted 6.16.0-rc6-syzkaller-g7abc678e3084 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:skb_reset_transport_header include/linux/skbuff.h:3032 [inline] RIP: 0010:ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151 Call Trace: <TASK> skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53 nsh_gso_segment+0x54a/0xe10 net/nsh/nsh.c:110 skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53 __skb_gso_segment+0x342/0x510 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x857/0x11b0 net/core/dev.c:3950 validate_xmit_skb_list+0x84/0x120 net/core/dev.c:4000 sch_direct_xmit+0xd3/0x4b0 net/sched/sch_generic.c:329 __dev_xmit_skb net/core/dev.c:4102 [inline] __dev_queue_xmit+0x17b6/0x3a70 net/core/dev.c:4679 | |||||
| CVE-2025-38571 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 8.2 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix client side handling of tls alerts A security exploit was discovered in NFS over TLS in tls_alert_recv due to its assumption that there is valid data in the msghdr's iterator's kvec. Instead, this patch proposes the rework how control messages are setup and used by sock_recvmsg(). If no control message structure is setup, kTLS layer will read and process TLS data record types. As soon as it encounters a TLS control message, it would return an error. At that point, NFS can setup a kvec backed control buffer and read in the control message such as a TLS alert. Scott found that a msg iterator can advance the kvec pointer as a part of the copy process thus we need to revert the iterator before calling into the tls_alert_recv. | |||||
| CVE-2025-38560 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 9.3 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: x86/sev: Evict cache lines during SNP memory validation An SNP cache coherency vulnerability requires a cache line eviction mitigation when validating memory after a page state change to private. The specific mitigation is to touch the first and last byte of each 4K page that is being validated. There is no need to perform the mitigation when performing a page state change to shared and rescinding validation. CPUID bit Fn8000001F_EBX[31] defines the COHERENCY_SFW_NO CPUID bit that, when set, indicates that the software mitigation for this vulnerability is not needed. Implement the mitigation and invoke it when validating memory (making it private) and the COHERENCY_SFW_NO bit is not set, indicating the SNP guest is vulnerable. | |||||
| CVE-2025-38552 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 9.4 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: plug races between subflow fail and subflow creation We have races similar to the one addressed by the previous patch between subflow failing and additional subflow creation. They are just harder to trigger. The solution is similar. Use a separate flag to track the condition 'socket state prevent any additional subflow creation' protected by the fallback lock. The socket fallback makes such flag true, and also receiving or sending an MP_FAIL option. The field 'allow_infinite_fallback' is now always touched under the relevant lock, we can drop the ONCE annotation on write. | |||||
| CVE-2025-38550 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: Delay put pmc->idev in mld_del_delrec() pmc->idev is still used in ip6_mc_clear_src(), so as mld_clear_delrec() does, the reference should be put after ip6_mc_clear_src() return. | |||||
| CVE-2025-38547 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.3 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: axp20x_adc: Add missing sentinel to AXP717 ADC channel maps The AXP717 ADC channel maps is missing a sentinel entry at the end. This causes a KASAN warning. Add the missing sentinel entry. | |||||
| CVE-2025-38539 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Add down_write(trace_event_sem) when adding trace event When a module is loaded, it adds trace events defined by the module. It may also need to modify the modules trace printk formats to replace enum names with their values. If two modules are loaded at the same time, the adding of the event to the ftrace_events list can corrupt the walking of the list in the code that is modifying the printk format strings and crash the kernel. The addition of the event should take the trace_event_sem for write while it adds the new event. Also add a lockdep_assert_held() on that semaphore in __trace_add_event_dirs() as it iterates the list. | |||||
| CVE-2025-38528 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject %p% format string in bprintf-like helpers static const char fmt[] = "%p%"; bpf_trace_printk(fmt, sizeof(fmt)); The above BPF program isn't rejected and causes a kernel warning at runtime: Please remove unsupported %\x00 in format string WARNING: CPU: 1 PID: 7244 at lib/vsprintf.c:2680 format_decode+0x49c/0x5d0 This happens because bpf_bprintf_prepare skips over the second %, detected as punctuation, while processing %p. This patch fixes it by not skipping over punctuation. %\x00 is then processed in the next iteration and rejected. | |||||
| CVE-2025-38514 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix oops due to non-existence of prealloc backlog struct If an AF_RXRPC service socket is opened and bound, but calls are preallocated, then rxrpc_alloc_incoming_call() will oops because the rxrpc_backlog struct doesn't get allocated until the first preallocation is made. Fix this by returning NULL from rxrpc_alloc_incoming_call() if there is no backlog struct. This will cause the incoming call to be aborted. | |||||
| CVE-2025-38512 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: prevent A-MSDU attacks in mesh networks This patch is a mitigation to prevent the A-MSDU spoofing vulnerability for mesh networks. The initial update to the IEEE 802.11 standard, in response to the FragAttacks, missed this case (CVE-2025-27558). It can be considered a variant of CVE-2020-24588 but for mesh networks. This patch tries to detect if a standard MSDU was turned into an A-MSDU by an adversary. This is done by parsing a received A-MSDU as a standard MSDU, calculating the length of the Mesh Control header, and seeing if the 6 bytes after this header equal the start of an rfc1042 header. If equal, this is a strong indication of an ongoing attack attempt. This defense was tested with mac80211_hwsim against a mesh network that uses an empty Mesh Address Extension field, i.e., when four addresses are used, and when using a 12-byte Mesh Address Extension field, i.e., when six addresses are used. Functionality of normal MSDUs and A-MSDUs was also tested, and confirmed working, when using both an empty and 12-byte Mesh Address Extension field. It was also tested with mac80211_hwsim that A-MSDU attacks in non-mesh networks keep being detected and prevented. Note that the vulnerability being patched, and the defense being implemented, was also discussed in the following paper and in the following IEEE 802.11 presentation: https://papers.mathyvanhoef.com/wisec2025.pdf https://mentor.ieee.org/802.11/dcn/25/11-25-0949-00-000m-a-msdu-mesh-spoof-protection.docx | |||||
| CVE-2025-38511 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Clear all LMTT pages on alloc Our LMEM buffer objects are not cleared by default on alloc and during VF provisioning we only setup LMTT PTEs for the actually provisioned LMEM range. But beyond that valid range we might leave some stale data that could either point to some other VFs allocations or even to the PF pages. Explicitly clear all new LMTT page to avoid the risk that a malicious VF would try to exploit that gap. While around add asserts to catch any undesired PTE overwrites and low-level debug traces to track LMTT PT life-cycle. (cherry picked from commit 3fae6918a3e27cce20ded2551f863fb05d4bef8d) | |||||
| CVE-2025-38508 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.3 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: x86/sev: Use TSC_FACTOR for Secure TSC frequency calculation When using Secure TSC, the GUEST_TSC_FREQ MSR reports a frequency based on the nominal P0 frequency, which deviates slightly (typically ~0.2%) from the actual mean TSC frequency due to clocking parameters. Over extended VM uptime, this discrepancy accumulates, causing clock skew between the hypervisor and a SEV-SNP VM, leading to early timer interrupts as perceived by the guest. The guest kernel relies on the reported nominal frequency for TSC-based timekeeping, while the actual frequency set during SNP_LAUNCH_START may differ. This mismatch results in inaccurate time calculations, causing the guest to perceive hrtimers as firing earlier than expected. Utilize the TSC_FACTOR from the SEV firmware's secrets page (see "Secrets Page Format" in the SNP Firmware ABI Specification) to calculate the mean TSC frequency, ensuring accurate timekeeping and mitigating clock skew in SEV-SNP VMs. Use early_ioremap_encrypted() to map the secrets page as ioremap_encrypted() uses kmalloc() which is not available during early TSC initialization and causes a panic. [ bp: Drop the silly dummy var: https://lore.kernel.org/r/20250630192726.GBaGLlHl84xIopx4Pt@fat_crate.local ] | |||||
| CVE-2025-38505 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: discard erroneous disassoc frames on STA interface When operating in concurrent STA/AP mode with host MLME enabled, the firmware incorrectly sends disassociation frames to the STA interface when clients disconnect from the AP interface. This causes kernel warnings as the STA interface processes disconnect events that don't apply to it: [ 1303.240540] WARNING: CPU: 0 PID: 513 at net/wireless/mlme.c:141 cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.250861] Modules linked in: 8021q garp stp mrp llc rfcomm bnep btnxpuart nls_iso8859_1 nls_cp437 onboard_us [ 1303.327651] CPU: 0 UID: 0 PID: 513 Comm: kworker/u9:2 Not tainted 6.16.0-rc1+ #3 PREEMPT [ 1303.335937] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT) [ 1303.343588] Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex] [ 1303.350856] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1303.357904] pc : cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.364065] lr : cfg80211_process_disassoc+0x70/0xec [cfg80211] [ 1303.370221] sp : ffff800083053be0 [ 1303.373590] x29: ffff800083053be0 x28: 0000000000000000 x27: 0000000000000000 [ 1303.380855] x26: 0000000000000000 x25: 00000000ffffffff x24: ffff000002c5b8ae [ 1303.388120] x23: ffff000002c5b884 x22: 0000000000000001 x21: 0000000000000008 [ 1303.395382] x20: ffff000002c5b8ae x19: ffff0000064dd408 x18: 0000000000000006 [ 1303.402646] x17: 3a36333a61623a30 x16: 32206d6f72662063 x15: ffff800080bfe048 [ 1303.409910] x14: ffff000003625300 x13: 0000000000000001 x12: 0000000000000000 [ 1303.417173] x11: 0000000000000002 x10: ffff000003958600 x9 : ffff000003625300 [ 1303.424434] x8 : ffff00003fd9ef40 x7 : ffff0000039fc280 x6 : 0000000000000002 [ 1303.431695] x5 : ffff0000038976d4 x4 : 0000000000000000 x3 : 0000000000003186 [ 1303.438956] x2 : 000000004836ba20 x1 : 0000000000006986 x0 : 00000000d00479de [ 1303.446221] Call trace: [ 1303.448722] cfg80211_process_disassoc+0x78/0xec [cfg80211] (P) [ 1303.454894] cfg80211_rx_mlme_mgmt+0x64/0xf8 [cfg80211] [ 1303.460362] mwifiex_process_mgmt_packet+0x1ec/0x460 [mwifiex] [ 1303.466380] mwifiex_process_sta_rx_packet+0x1bc/0x2a0 [mwifiex] [ 1303.472573] mwifiex_handle_rx_packet+0xb4/0x13c [mwifiex] [ 1303.478243] mwifiex_rx_work_queue+0x158/0x198 [mwifiex] [ 1303.483734] process_one_work+0x14c/0x28c [ 1303.487845] worker_thread+0x2cc/0x3d4 [ 1303.491680] kthread+0x12c/0x208 [ 1303.495014] ret_from_fork+0x10/0x20 Add validation in the STA receive path to verify that disassoc/deauth frames originate from the connected AP. Frames that fail this check are discarded early, preventing them from reaching the MLME layer and triggering WARN_ON(). This filtering logic is similar with that used in the ieee80211_rx_mgmt_disassoc() function in mac80211, which drops disassoc frames that don't match the current BSSID (!ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)), ensuring only relevant frames are processed. Tested on: - 8997 with FW 16.68.1.p197 | |||||
| CVE-2025-38499 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns What we want is to verify there is that clone won't expose something hidden by a mount we wouldn't be able to undo. "Wouldn't be able to undo" may be a result of MNT_LOCKED on a child, but it may also come from lacking admin rights in the userns of the namespace mount belongs to. clone_private_mnt() checks the former, but not the latter. There's a number of rather confusing CAP_SYS_ADMIN checks in various userns during the mount, especially with the new mount API; they serve different purposes and in case of clone_private_mnt() they usually, but not always end up covering the missing check mentioned above. | |||||
| CVE-2025-38498 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: do_change_type(): refuse to operate on unmounted/not ours mounts Ensure that propagation settings can only be changed for mounts located in the caller's mount namespace. This change aligns permission checking with the rest of mount(2). | |||||
| CVE-2025-38495 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: ensure the allocated report buffer can contain the reserved report ID When the report ID is not used, the low level transport drivers expect the first byte to be 0. However, currently the allocated buffer not account for that extra byte, meaning that instead of having 8 guaranteed bytes for implement to be working, we only have 7. | |||||
| CVE-2025-38494 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: do not bypass hid_hw_raw_request hid_hw_raw_request() is actually useful to ensure the provided buffer and length are valid. Directly calling in the low level transport driver function bypassed those checks and allowed invalid paramto be used. | |||||
| CVE-2025-38486 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: soundwire: Revert "soundwire: qcom: Add set_channel_map api support" This reverts commit 7796c97df6b1b2206681a07f3c80f6023a6593d5. This patch broke Dragonboard 845c (sdm845). I see: Unexpected kernel BRK exception at EL1 Internal error: BRK handler: 00000000f20003e8 [#1] SMP pc : qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom] lr : snd_soc_dai_set_channel_map+0x34/0x78 Call trace: qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom] (P) sdm845_dai_init+0x18c/0x2e0 [snd_soc_sdm845] snd_soc_link_init+0x28/0x6c snd_soc_bind_card+0x5f4/0xb0c snd_soc_register_card+0x148/0x1a4 devm_snd_soc_register_card+0x50/0xb0 sdm845_snd_platform_probe+0x124/0x148 [snd_soc_sdm845] platform_probe+0x6c/0xd0 really_probe+0xc0/0x2a4 __driver_probe_device+0x7c/0x130 driver_probe_device+0x40/0x118 __device_attach_driver+0xc4/0x108 bus_for_each_drv+0x8c/0xf0 __device_attach+0xa4/0x198 device_initial_probe+0x18/0x28 bus_probe_device+0xb8/0xbc deferred_probe_work_func+0xac/0xfc process_one_work+0x244/0x658 worker_thread+0x1b4/0x360 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Kernel panic - not syncing: BRK handler: Fatal exception Dan has also reported following issues with the original patch https://lore.kernel.org/all/33fe8fe7-719a-405a-9ed2-d9f816ce1d57@sabinyo.mountain/ Bug #1: The zeroeth element of ctrl->pconfig[] is supposed to be unused. We start counting at 1. However this code sets ctrl->pconfig[0].ch_mask = 128. Bug #2: There are SLIM_MAX_TX_PORTS (16) elements in tx_ch[] array but only QCOM_SDW_MAX_PORTS + 1 (15) in the ctrl->pconfig[] array so it corrupts memory like Yongqin Liu pointed out. Bug 3: Like Jie Gan pointed out, it erases all the tx information with the rx information. | |||||
| CVE-2025-38466 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: perf: Revert to requiring CAP_SYS_ADMIN for uprobes Jann reports that uprobes can be used destructively when used in the middle of an instruction. The kernel only verifies there is a valid instruction at the requested offset, but due to variable instruction length cannot determine if this is an instruction as seen by the intended execution stream. Additionally, Mark Rutland notes that on architectures that mix data in the text segment (like arm64), a similar things can be done if the data word is 'mistaken' for an instruction. As such, require CAP_SYS_ADMIN for uprobes. | |||||
| CVE-2025-38453 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/msg_ring: ensure io_kiocb freeing is deferred for RCU syzbot reports that defer/local task_work adding via msg_ring can hit a request that has been freed: CPU: 1 UID: 0 PID: 19356 Comm: iou-wrk-19354 Not tainted 6.16.0-rc4-syzkaller-00108-g17bbde2e1716 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xd2/0x2b0 mm/kasan/report.c:521 kasan_report+0x118/0x150 mm/kasan/report.c:634 io_req_local_work_add io_uring/io_uring.c:1184 [inline] __io_req_task_work_add+0x589/0x950 io_uring/io_uring.c:1252 io_msg_remote_post io_uring/msg_ring.c:103 [inline] io_msg_data_remote io_uring/msg_ring.c:133 [inline] __io_msg_ring_data+0x820/0xaa0 io_uring/msg_ring.c:151 io_msg_ring_data io_uring/msg_ring.c:173 [inline] io_msg_ring+0x134/0xa00 io_uring/msg_ring.c:314 __io_issue_sqe+0x17e/0x4b0 io_uring/io_uring.c:1739 io_issue_sqe+0x165/0xfd0 io_uring/io_uring.c:1762 io_wq_submit_work+0x6e9/0xb90 io_uring/io_uring.c:1874 io_worker_handle_work+0x7cd/0x1180 io_uring/io-wq.c:642 io_wq_worker+0x42f/0xeb0 io_uring/io-wq.c:696 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> which is supposed to be safe with how requests are allocated. But msg ring requests alloc and free on their own, and hence must defer freeing to a sane time. Add an rcu_head and use kfree_rcu() in both spots where requests are freed. Only the one in io_msg_tw_complete() is strictly required as it has been visible on the other ring, but use it consistently in the other spot as well. This should not cause any other issues outside of KASAN rightfully complaining about it. | |||||