Total
33243 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-50275 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: arm64/sve: Discard stale CPU state when handling SVE traps The logic for handling SVE traps manipulates saved FPSIMD/SVE state incorrectly, and a race with preemption can result in a task having TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state is stale (e.g. with SVE traps enabled). This has been observed to result in warnings from do_sve_acc() where SVE traps are not expected while TIF_SVE is set: | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ Warnings of this form have been reported intermittently, e.g. https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/ https://lore.kernel.org/linux-arm-kernel/000000000000511e9a060ce5a45c@google.com/ The race can occur when the SVE trap handler is preempted before and after manipulating the saved FPSIMD/SVE state, starting and ending on the same CPU, e.g. | void do_sve_acc(unsigned long esr, struct pt_regs *regs) | { | // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled | // task->fpsimd_cpu is 0. | // per_cpu_ptr(&fpsimd_last_state, 0) is task. | | ... | | // Preempted; migrated from CPU 0 to CPU 1. | // TIF_FOREIGN_FPSTATE is set. | | get_cpu_fpsimd_context(); | | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ | | sve_init_regs() { | if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { | ... | } else { | fpsimd_to_sve(current); | current->thread.fp_type = FP_STATE_SVE; | } | } | | put_cpu_fpsimd_context(); | | // Preempted; migrated from CPU 1 to CPU 0. | // task->fpsimd_cpu is still 0 | // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then: | // - Stale HW state is reused (with SVE traps enabled) | // - TIF_FOREIGN_FPSTATE is cleared | // - A return to userspace skips HW state restore | } Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set by calling fpsimd_flush_task_state() to detach from the saved CPU state. This ensures that a subsequent context switch will not reuse the stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the new state to be reloaded from memory prior to a return to userspace. | |||||
| CVE-2024-50164 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix overloading of MEM_UNINIT's meaning Lonial reported an issue in the BPF verifier where check_mem_size_reg() has the following code: if (!tnum_is_const(reg->var_off)) /* For unprivileged variable accesses, disable raw * mode so that the program is required to * initialize all the memory that the helper could * just partially fill up. */ meta = NULL; This means that writes are not checked when the register containing the size of the passed buffer has not a fixed size. Through this bug, a BPF program can write to a map which is marked as read-only, for example, .rodata global maps. The problem is that MEM_UNINIT's initial meaning that "the passed buffer to the BPF helper does not need to be initialized" which was added back in commit 435faee1aae9 ("bpf, verifier: add ARG_PTR_TO_RAW_STACK type") got overloaded over time with "the passed buffer is being written to". The problem however is that checks such as the above which were added later via 06c1c049721a ("bpf: allow helpers access to variable memory") set meta to NULL in order force the user to always initialize the passed buffer to the helper. Due to the current double meaning of MEM_UNINIT, this bypasses verifier write checks to the memory (not boundary checks though) and only assumes the latter memory is read instead. Fix this by reverting MEM_UNINIT back to its original meaning, and having MEM_WRITE as an annotation to BPF helpers in order to then trigger the BPF verifier checks for writing to memory. Some notes: check_arg_pair_ok() ensures that for ARG_CONST_SIZE{,_OR_ZERO} we can access fn->arg_type[arg - 1] since it must contain a preceding ARG_PTR_TO_MEM. For check_mem_reg() the meta argument can be removed altogether since we do check both BPF_READ and BPF_WRITE. Same for the equivalent check_kfunc_mem_size_reg(). | |||||
| CVE-2024-49951 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix possible crash on mgmt_index_removed If mgmt_index_removed is called while there are commands queued on cmd_sync it could lead to crashes like the bellow trace: 0x0000053D: __list_del_entry_valid_or_report+0x98/0xdc 0x0000053D: mgmt_pending_remove+0x18/0x58 [bluetooth] 0x0000053E: mgmt_remove_adv_monitor_complete+0x80/0x108 [bluetooth] 0x0000053E: hci_cmd_sync_work+0xbc/0x164 [bluetooth] So while handling mgmt_index_removed this attempts to dequeue commands passed as user_data to cmd_sync. | |||||
| CVE-2024-49939 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: avoid to add interface to list twice when SER If SER L2 occurs during the WoWLAN resume flow, the add interface flow is triggered by ieee80211_reconfig(). However, due to rtw89_wow_resume() return failure, it will cause the add interface flow to be executed again, resulting in a double add list and causing a kernel panic. Therefore, we have added a check to prevent double adding of the list. list_add double add: new=ffff99d6992e2010, prev=ffff99d6992e2010, next=ffff99d695302628. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:37! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W O 6.6.30-02659-gc18865c4dfbd #1 770df2933251a0e3c888ba69d1053a817a6376a7 Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.169.0 06/24/2021 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:__list_add_valid_or_report+0x5e/0xb0 Code: c7 74 18 48 39 ce 74 13 b0 01 59 5a 5e 5f 41 58 41 59 41 5a 5d e9 e2 d6 03 00 cc 48 c7 c7 8d 4f 17 83 48 89 c2 e8 02 c0 00 00 <0f> 0b 48 c7 c7 aa 8c 1c 83 e8 f4 bf 00 00 0f 0b 48 c7 c7 c8 bc 12 RSP: 0018:ffffa91b8007bc50 EFLAGS: 00010246 RAX: 0000000000000058 RBX: ffff99d6992e0900 RCX: a014d76c70ef3900 RDX: ffffa91b8007bae8 RSI: 00000000ffffdfff RDI: 0000000000000001 RBP: ffffa91b8007bc88 R08: 0000000000000000 R09: ffffa91b8007bae0 R10: 00000000ffffdfff R11: ffffffff83a79800 R12: ffff99d695302060 R13: ffff99d695300900 R14: ffff99d6992e1be0 R15: ffff99d6992e2010 FS: 0000000000000000(0000) GS:ffff99d6aac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000078fbdba43480 CR3: 000000010e464000 CR4: 00000000001506f0 Call Trace: <TASK> ? __die_body+0x1f/0x70 ? die+0x3d/0x60 ? do_trap+0xa4/0x110 ? __list_add_valid_or_report+0x5e/0xb0 ? do_error_trap+0x6d/0x90 ? __list_add_valid_or_report+0x5e/0xb0 ? handle_invalid_op+0x30/0x40 ? __list_add_valid_or_report+0x5e/0xb0 ? exc_invalid_op+0x3c/0x50 ? asm_exc_invalid_op+0x16/0x20 ? __list_add_valid_or_report+0x5e/0xb0 rtw89_ops_add_interface+0x309/0x310 [rtw89_core 7c32b1ee6854761c0321027c8a58c5160e41f48f] drv_add_interface+0x5c/0x130 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] ieee80211_reconfig+0x241/0x13d0 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] ? finish_wait+0x3e/0x90 ? synchronize_rcu_expedited+0x174/0x260 ? sync_rcu_exp_done_unlocked+0x50/0x50 ? wake_bit_function+0x40/0x40 ieee80211_restart_work+0xf0/0x140 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] process_scheduled_works+0x1e5/0x480 worker_thread+0xea/0x1e0 kthread+0xdb/0x110 ? move_linked_works+0x90/0x90 ? kthread_associate_blkcg+0xa0/0xa0 ret_from_fork+0x3b/0x50 ? kthread_associate_blkcg+0xa0/0xa0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: dm_integrity async_xor xor async_tx lz4 lz4_compress zstd zstd_compress zram zsmalloc rfcomm cmac uinput algif_hash algif_skcipher af_alg btusb btrtl iio_trig_hrtimer industrialio_sw_trigger btmtk industrialio_configfs btbcm btintel uvcvideo videobuf2_vmalloc iio_trig_sysfs videobuf2_memops videobuf2_v4l2 videobuf2_common uvc snd_hda_codec_hdmi veth snd_hda_intel snd_intel_dspcfg acpi_als snd_hda_codec industrialio_triggered_buffer kfifo_buf snd_hwdep industrialio i2c_piix4 snd_hda_core designware_i2s ip6table_nat snd_soc_max98357a xt_MASQUERADE xt_cgroup snd_soc_acp_rt5682_mach fuse rtw89_8922ae(O) rtw89_8922a(O) rtw89_pci(O) rtw89_core(O) 8021q mac80211(O) bluetooth ecdh_generic ecc cfg80211 r8152 mii joydev gsmi: Log Shutdown Reason 0x03 ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2024-49934 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 4.6 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name It's observed that a crash occurs during hot-remove a memory device, in which user is accessing the hugetlb. See calltrace as following: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 14045 at arch/x86/mm/fault.c:1278 do_user_addr_fault+0x2a0/0x790 Modules linked in: kmem device_dax cxl_mem cxl_pmem cxl_port cxl_pci dax_hmem dax_pmem nd_pmem cxl_acpi nd_btt cxl_core crc32c_intel nvme virtiofs fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc s mirror dm_region_hash dm_log dm_mod CPU: 1 PID: 14045 Comm: daxctl Not tainted 6.10.0-rc2-lizhijian+ #492 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:do_user_addr_fault+0x2a0/0x790 Code: 48 8b 00 a8 04 0f 84 b5 fe ff ff e9 1c ff ff ff 4c 89 e9 4c 89 e2 be 01 00 00 00 bf 02 00 00 00 e8 b5 ef 24 00 e9 42 fe ff ff <0f> 0b 48 83 c4 08 4c 89 ea 48 89 ee 4c 89 e7 5b 5d 41 5c 41 5d 41 RSP: 0000:ffffc90000a575f0 EFLAGS: 00010046 RAX: ffff88800c303600 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000001000 RSI: ffffffff82504162 RDI: ffffffff824b2c36 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90000a57658 R13: 0000000000001000 R14: ffff88800bc2e040 R15: 0000000000000000 FS: 00007f51cb57d880(0000) GS:ffff88807fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001000 CR3: 00000000072e2004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x8d/0x190 ? do_user_addr_fault+0x2a0/0x790 ? report_bug+0x1c3/0x1d0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? do_user_addr_fault+0x2a0/0x790 ? exc_page_fault+0x31/0x200 exc_page_fault+0x68/0x200 <...snip...> BUG: unable to handle page fault for address: 0000000000001000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI ---[ end trace 0000000000000000 ]--- BUG: unable to handle page fault for address: 0000000000001000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 14045 Comm: daxctl Kdump: loaded Tainted: G W 6.10.0-rc2-lizhijian+ #492 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dentry_name+0x1f4/0x440 <...snip...> ? dentry_name+0x2fa/0x440 vsnprintf+0x1f3/0x4f0 vprintk_store+0x23a/0x540 vprintk_emit+0x6d/0x330 _printk+0x58/0x80 dump_mapping+0x10b/0x1a0 ? __pfx_free_object_rcu+0x10/0x10 __dump_page+0x26b/0x3e0 ? vprintk_emit+0xe0/0x330 ? _printk+0x58/0x80 ? dump_page+0x17/0x50 dump_page+0x17/0x50 do_migrate_range+0x2f7/0x7f0 ? do_migrate_range+0x42/0x7f0 ? offline_pages+0x2f4/0x8c0 offline_pages+0x60a/0x8c0 memory_subsys_offline+0x9f/0x1c0 ? lockdep_hardirqs_on+0x77/0x100 ? _raw_spin_unlock_irqrestore+0x38/0x60 device_offline+0xe3/0x110 state_store+0x6e/0xc0 kernfs_fop_write_iter+0x143/0x200 vfs_write+0x39f/0x560 ksys_write+0x65/0xf0 do_syscall_64+0x62/0x130 Previously, some sanity check have been done in dump_mapping() before the print facility parsing '%pd' though, it's still possible to run into an invalid dentry.d_name.name. Since dump_mapping() only needs to dump the filename only, retrieve it by itself in a safer way to prevent an unnecessary crash. Note that either retrieving the filename with '%pd' or strncpy_from_kernel_nofault(), the filename could be unreliable. | |||||
| CVE-2024-49861 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix helper writes to read-only maps Lonial found an issue that despite user- and BPF-side frozen BPF map (like in case of .rodata), it was still possible to write into it from a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT} as arguments. In check_func_arg() when the argument is as mentioned, the meta->raw_mode is never set. Later, check_helper_mem_access(), under the case of PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the subsequent call to check_map_access_type() and given the BPF map is read-only it succeeds. The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT when results are written into them as opposed to read out of them. The latter indicates that it's okay to pass a pointer to uninitialized memory as the memory is written to anyway. However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM just with additional alignment requirement. So it is better to just get rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the fixed size memory types. For this, add MEM_ALIGNED to additionally ensure alignment given these helpers write directly into the args via *<ptr> = val. The .arg*_size has been initialized reflecting the actual sizeof(*<ptr>). MEM_ALIGNED can only be used in combination with MEM_FIXED_SIZE annotated argument types, since in !MEM_FIXED_SIZE cases the verifier does not know the buffer size a priori and therefore cannot blindly write *<ptr> = val. | |||||
| CVE-2024-49571 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: check iparea_offset and ipv6_prefixes_cnt when receiving proposal msg When receiving proposal msg in server, the field iparea_offset and the field ipv6_prefixes_cnt in proposal msg are from the remote client and can not be fully trusted. Especially the field iparea_offset, once exceed the max value, there has the chance to access wrong address, and crash may happen. This patch checks iparea_offset and ipv6_prefixes_cnt before using them. | |||||
| CVE-2024-47408 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: check smcd_v2_ext_offset when receiving proposal msg When receiving proposal msg in server, the field smcd_v2_ext_offset in proposal msg is from the remote client and can not be fully trusted. Once the value of smcd_v2_ext_offset exceed the max value, there has the chance to access wrong address, and crash may happen. This patch checks the value of smcd_v2_ext_offset before using it. | |||||
| CVE-2024-46841 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't BUG_ON on ENOMEM from btrfs_lookup_extent_info() in walk_down_proc() We handle errors here properly, ENOMEM isn't fatal, return the error. | |||||
| CVE-2024-45802 | 1 Squid-cache | 1 Squid | 2025-11-03 | N/A | 7.5 HIGH |
| Squid is an open source caching proxy for the Web supporting HTTP, HTTPS, FTP, and more. Due to Input Validation, Premature Release of Resource During Expected Lifetime, and Missing Release of Resource after Effective Lifetime bugs, Squid is vulnerable to Denial of Service attacks by a trusted server against all clients using the proxy. This bug is fixed in the default build configuration of Squid version 6.10. | |||||
| CVE-2024-45236 | 1 Nicmx | 1 Fort-validator | 2025-11-03 | N/A | 7.5 HIGH |
| An issue was discovered in Fort before 1.6.3. A malicious RPKI repository that descends from a (trusted) Trust Anchor can serve (via rsync or RRDP) a signed object containing an empty signedAttributes field. Fort accesses the set's elements without sanitizing it first. Because Fort is an RPKI Relying Party, a crash can lead to Route Origin Validation unavailability, which can lead to compromised routing. | |||||
| CVE-2024-45234 | 1 Nicmx | 1 Fort-validator | 2025-11-03 | N/A | 7.5 HIGH |
| An issue was discovered in Fort before 1.6.3. A malicious RPKI repository that descends from a (trusted) Trust Anchor can serve (via rsync or RRDP) an ROA or a Manifest containing a signedAttrs encoded in non-canonical form. This bypasses Fort's BER decoder, reaching a point in the code that panics when faced with data not encoded in DER. Because Fort is an RPKI Relying Party, a panic can lead to Route Origin Validation unavailability, which can lead to compromised routing. | |||||
| CVE-2024-44950 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: fix invalid FIFO access with special register set When enabling access to the special register set, Receiver time-out and RHR interrupts can happen. In this case, the IRQ handler will try to read from the FIFO thru the RHR register at address 0x00, but address 0x00 is mapped to DLL register, resulting in erroneous FIFO reading. Call graph example: sc16is7xx_startup(): entry sc16is7xx_ms_proc(): entry sc16is7xx_set_termios(): entry sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set sc16is7xx_port_irq() entry --> IIR is 0x0C sc16is7xx_handle_rx() entry sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is mapped to DLL (LCR=LCR_CONF_MODE_A) sc16is7xx_set_baud(): exit --> Restore access to general register set Fix the problem by claiming the efr_lock mutex when accessing the Special register set. | |||||
| CVE-2024-44172 | 1 Apple | 1 Macos | 2025-11-03 | N/A | 3.3 LOW |
| A privacy issue was addressed with improved private data redaction for log entries. This issue is fixed in macOS Ventura 13.7.3, macOS Sonoma 14.7.3, macOS Sequoia 15. An app may be able to access contacts. | |||||
| CVE-2024-42319 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-cmdq: Move devm_mbox_controller_register() after devm_pm_runtime_enable() When mtk-cmdq unbinds, a WARN_ON message with condition pm_runtime_get_sync() < 0 occurs. According to the call tracei below: cmdq_mbox_shutdown mbox_free_channel mbox_controller_unregister __devm_mbox_controller_unregister ... The root cause can be deduced to be calling pm_runtime_get_sync() after calling pm_runtime_disable() as observed below: 1. CMDQ driver uses devm_mbox_controller_register() in cmdq_probe() to bind the cmdq device to the mbox_controller, so devm_mbox_controller_unregister() will automatically unregister the device bound to the mailbox controller when the device-managed resource is removed. That means devm_mbox_controller_unregister() and cmdq_mbox_shoutdown() will be called after cmdq_remove(). 2. CMDQ driver also uses devm_pm_runtime_enable() in cmdq_probe() after devm_mbox_controller_register(), so that devm_pm_runtime_disable() will be called after cmdq_remove(), but before devm_mbox_controller_unregister(). To fix this problem, cmdq_probe() needs to move devm_mbox_controller_register() after devm_pm_runtime_enable() to make devm_pm_runtime_disable() be called after devm_mbox_controller_unregister(). | |||||
| CVE-2024-39282 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: Fix FSM command timeout issue When driver processes the internal state change command, it use an asynchronous thread to process the command operation. If the main thread detects that the task has timed out, the asynchronous thread will panic when executing the completion notification because the main thread completion object has been released. BUG: unable to handle page fault for address: fffffffffffffff8 PGD 1f283a067 P4D 1f283a067 PUD 1f283c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:complete_all+0x3e/0xa0 [...] Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x69/0xa0 ? asm_exc_page_fault+0x22/0x30 ? complete_all+0x3e/0xa0 fsm_main_thread+0xa3/0x9c0 [mtk_t7xx (HASH:1400 5)] ? __pfx_autoremove_wake_function+0x10/0x10 kthread+0xd8/0x110 ? __pfx_fsm_main_thread+0x10/0x10 [mtk_t7xx (HASH:1400 5)] ? __pfx_kthread+0x10/0x10 ret_from_fork+0x38/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> [...] CR2: fffffffffffffff8 ---[ end trace 0000000000000000 ]--- Use the reference counter to ensure safe release as Sergey suggests: https://lore.kernel.org/all/da90f64c-260a-4329-87bf-1f9ff20a5951@gmail.com/ | |||||
| CVE-2024-38479 | 1 Apache | 1 Traffic Server | 2025-11-03 | N/A | 7.5 HIGH |
| Improper Input Validation vulnerability in Apache Traffic Server. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.5. Users are recommended to upgrade to version 9.2.6, which fixes the issue, or 10.0.2, which does not have the issue. | |||||
| CVE-2024-36845 | 1 Libmodbus | 1 Libmodbus | 2025-11-03 | N/A | 4.3 MEDIUM |
| An invalid pointer in the modbus_receive() function of libmodbus v3.1.6 allows attackers to cause a Denial of Service (DoS) via a crafted message sent to the unit-test-server. | |||||
| CVE-2024-34509 | 2 Debian, Offis | 2 Debian Linux, Dcmtk | 2025-11-03 | N/A | 5.3 MEDIUM |
| dcmdata in DCMTK before 3.6.9 has a segmentation fault via an invalid DIMSE message. | |||||
| CVE-2024-26921 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: inet: inet_defrag: prevent sk release while still in use ip_local_out() and other functions can pass skb->sk as function argument. If the skb is a fragment and reassembly happens before such function call returns, the sk must not be released. This affects skb fragments reassembled via netfilter or similar modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline. Eric Dumazet made an initial analysis of this bug. Quoting Eric: Calling ip_defrag() in output path is also implying skb_orphan(), which is buggy because output path relies on sk not disappearing. A relevant old patch about the issue was : 8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()") [..] net/ipv4/ip_output.c depends on skb->sk being set, and probably to an inet socket, not an arbitrary one. If we orphan the packet in ipvlan, then downstream things like FQ packet scheduler will not work properly. We need to change ip_defrag() to only use skb_orphan() when really needed, ie whenever frag_list is going to be used. Eric suggested to stash sk in fragment queue and made an initial patch. However there is a problem with this: If skb is refragmented again right after, ip_do_fragment() will copy head->sk to the new fragments, and sets up destructor to sock_wfree. IOW, we have no choice but to fix up sk_wmem accouting to reflect the fully reassembled skb, else wmem will underflow. This change moves the orphan down into the core, to last possible moment. As ip_defrag_offset is aliased with sk_buff->sk member, we must move the offset into the FRAG_CB, else skb->sk gets clobbered. This allows to delay the orphaning long enough to learn if the skb has to be queued or if the skb is completing the reasm queue. In the former case, things work as before, skb is orphaned. This is safe because skb gets queued/stolen and won't continue past reasm engine. In the latter case, we will steal the skb->sk reference, reattach it to the head skb, and fix up wmem accouting when inet_frag inflates truesize. | |||||