Total
79 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53085 | 2026-07-15 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix mm lifecycle in open-coded task_vma iterator The open-coded task_vma iterator reads task->mm locklessly and acquires mmap_read_trylock() but never calls mmget(). If the task exits concurrently, the mm_struct can be freed as it is not SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free. Safely read task->mm with a trylock on alloc_lock and acquire an mm reference. Drop the reference via bpf_iter_mmput_async() in _destroy() and error paths. bpf_iter_mmput_async() is a local wrapper around mmput_async() with a fallback to mmput() on !CONFIG_MMU. Reject irqs-disabled contexts (including NMI) up front. Operations used by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async) take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from NMI or from a tracepoint that fires with those locks held could deadlock. A trylock on alloc_lock is used instead of the blocking task_lock() (get_task_mm) to avoid a deadlock when a softirq BPF program iterates a task that already holds its alloc_lock on the same CPU. | |||||
| CVE-2026-53006 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-07-15 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in icmpv6_rcv() Caching saddr and daddr before pskb_pull() is problematic since skb->head can change. Remove these temporary variables: - We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr when net_dbg_ratelimited() is called in the slow path. - Avoid potential future misuse after pskb_pull() call. | |||||
| CVE-2026-52976 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl() Two error handling issues exist in xe_exec_queue_create_ioctl(): 1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in preempt fence mode, xe_vm_add_compute_exec_queue() has already added the queue to the VM's compute exec queue list. Skipping the kill leaves the queue on that list, leading to a dangling pointer after the queue is freed. 2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has succeeded, the error path does not call xe_hw_engine_group_del_exec_queue() to remove the queue from the hw engine group list. The queue is then freed while still linked into the hw engine group, causing a use-after-free. Fix both by: - Changing the xe_hw_engine_group_add_exec_queue() failure path to jump to kill_exec_queue so that xe_exec_queue_kill() properly removes the queue from the VM's compute list. - Adding a del_hw_engine_group label before kill_exec_queue for the xa_alloc() failure path, which removes the queue from the hw engine group before proceeding with the rest of the cleanup. (cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8) | |||||
| CVE-2026-52973 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: futex: Drop CLONE_THREAD requirement for private default hash alloc Currently need_futex_hash_allocate_default() depends on strict pthread semantics, abusing CLONE_THREAD. This breaks the non-concurrency assumptions when doing the mm->futex_ref pcpu allocations, leading to bugs[0] when sharing the mm in other ways; ie: BUG: KASAN: slab-use-after-free in futex_hash_put ... where the +1 bias can end up on a percpu counter that mm->futex_ref no longer points at. Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding vfork keeps the existing paths untouched (no overhead), and we can't race in the first place: either the parent is suspended and the child runs alone, or mm->futex_ref is already allocated from an earlier CLONE_VM. | |||||
| CVE-2026-52952 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset In __iommu_group_set_domain_internal(), concurrent domain attachments are rejected when any device in the group is recovering. This is necessary to fence concurrent attachments to a multi-device group where devices might share the same RID due to PCI DMA alias quirks, but triggers the WARN_ON in __iommu_group_set_domain_nofail(). Other IOMMU_SET_DOMAIN_MUST_SUCCEED callers in detach/teardown paths, such as __iommu_group_set_core_domain and __iommu_release_dma_ownership, should not be rejected, as the domain would be freed anyway in these nofail paths while group->domain is still pointing to it. So pci_dev_reset_iommu_done() could trigger a UAF when re-attaching group->domain. Honor the IOMMU_SET_DOMAIN_MUST_SUCCEED flag, allowing the callers through the group->recovery_cnt fence, so as to update the group->domain pointer. Instead add a gdev->blocked check in the device iteration loop, to prevent any concurrent per-device detachment. | |||||
| CVE-2026-52950 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: fix UAF with retry loop Retry doesn't work here, since bo will be freed on error, leading to UAF. However, now that we do the alloc & init before the attach, we can now combine this as one unit and have the init do the alloc for us. This should make the retry safe. Reported by Sashiko. v2: Fix up the error unwind (CI) (cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7) | |||||
| CVE-2026-52924 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: sctp: purge outqueue on stale COOKIE-ECHO handling sctp_stream_update() is only invoked when the association is moved into COOKIE_WAIT during association setup/reconfiguration. In this path, the outbound stream scheduler state (stream->out_curr) is expected to be clean, since no user data should have been transmitted yet unless the state machine has already partially progressed. However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a Stale Cookie ERROR is received, the association is rolled back from COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already have been queued and even bundled with the COOKIE-ECHO chunk. During the rollback, sctp_stream_update() frees the old stream table and installs a new one, but it does not invalidate stream->out_curr. As a result, out_curr may still point to a freed sctp_stream_out entry from the previous stream state. Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on stream->out_curr->ext, which can lead to use-after-free once the old stream state has been released via sctp_stream_free(). This results in crashes such as (reported by Yuqi): BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140 Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312 CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted 7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full) sctp_sched_fcfs_dequeue+0x13a/0x140 sctp_outq_flush+0x1603/0x33e0 sctp_do_sm+0x31c9/0x5d30 sctp_assoc_bh_rcv+0x392/0x6f0 sctp_inq_push+0x1db/0x270 sctp_rcv+0x138d/0x3c10 Fix this by fully purging the association outqueue when handling the Stale Cookie case. This ensures all pending transmit and retransmit state is dropped, and any scheduler cached pointers are invalidated, making it safe to rebuild stream state during COOKIE_WAIT restart. Updating only stream->out_curr would be insufficient, since queued and retransmittable data would still reference the old stream state and trigger later use-after-free in dequeue paths. | |||||
| CVE-2026-52923 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted. | |||||
| CVE-2026-10671 | 2026-07-14 | N/A | 7.1 HIGH | ||
| In Zephyr's kernel pipe implementation, the userspace syscall verifier z_vrfy_k_pipe_init() in kernel/pipe.c used K_SYSCALL_OBJ() (which requires the kernel object to already be initialized) instead of K_SYSCALL_OBJ_NEVER_INIT() (which rejects an already-initialized object). As a result, on CONFIG_USERSPACE builds an unprivileged user thread that has been granted access to a k_pipe object can invoke the k_pipe_init syscall to re-initialize a pipe that is already in use. z_impl_k_pipe_init() unconditionally resets the ring buffer, sets pipe->waiting to 0, and re-initializes both wait queues (z_waitq_init on pipe->data and pipe->space) without waking or accounting for threads currently blocked on the pipe. Any thread already pended in k_pipe_read()/k_pipe_write() is left orphaned: still marked pending with pended_on pointing at the cleared wait queue and with stale qnode_dlist links into the (now re-initialized) embedded list head. When such an orphaned waiter is later timed out or woken, the scheduler calls sys_dlist_remove() on its stale node, writing through dangling prev/next pointers into kernel wait-queue/scheduler structures, causing list corruption (an attacker-driven invalid kernel write), lost wakeups, indefinitely blocked threads, and silent data loss. The flaw lets a deprivileged user thread corrupt the state of a kernel object shared with other threads/partitions. The fix switches the verifier to K_SYSCALL_OBJ_NEVER_INIT(), matching the existing k_msgq_init verifier, so a user thread can no longer re-initialize a live pipe. The vulnerable code shipped in v4.1.0 and remained through v4.4.0. | |||||
| CVE-2026-54778 | 2026-07-09 | N/A | 6.2 MEDIUM | ||
| CoreWCF is a port of the service side of Windows Communication Foundation (WCF) to .NET Core. Prior to 1.8.1 and 1.9.1, CoreWCF UnixDomainSocket POSIX peer identity resolution uses non-reentrant getpwuid and getgrgid calls, allowing concurrent connections to attribute one connection's identity to another or crash the host process under contention. This issue is fixed in versions 1.8.1 and 1.9.1. | |||||
| CVE-2025-49795 | 2026-07-07 | N/A | 7.5 HIGH | ||
| A NULL pointer dereference vulnerability was found in libxml2 when processing XPath XML expressions. This flaw allows an attacker to craft a malicious XML input to libxml2, leading to a denial of service. | |||||
| CVE-2026-58592 | 2026-07-02 | N/A | 8.3 HIGH | ||
| Ladybird contains a dangling-reference memory-safety flaw in its WebAssembly ESM-integration module loader. When a JavaScript function is imported into a WebAssembly module via the ESM path, WebAssemblyModule.cpp passes a stack-local Wasm::FunctionType by reference to create_host_function, whose host callback captures and later reads that reference; once the ESM link-loop iteration ends the FunctionType is destroyed, leaving the callback with a dangling reference (the normal instantiate path uses a long-lived reference and is not affected). Stale result-type data lets the host callback return an empty result vector for a statically non-empty result, so the destination register retains an attacker-influenced value that is then consumed by the WASM-GC array.set handler, which bit-casts the reference low bits to an ArrayInstance pointer after only a null check, yielding an arbitrary write. A web page can chain this into code execution in the WebContent process. Verified reachable from HTML content without any instrumentation or source modification. | |||||
| CVE-2026-12610 | 2 Fedoraproject, Redhat | 2 Sssd, Enterprise Linux | 2026-06-30 | N/A | 6.4 MEDIUM |
| A flaw was found in sssd. When authenticating with a YubiKey, the SSSD PAM responder can crash due to a use-after-free vulnerability, where a memory pointer is incorrectly handled. A local attacker could exploit this flaw by manipulating smartcard or YubiKey contents, leading to a denial of service that disrupts authentication. This vulnerability also presents a potential for privilege escalation, although it is difficult to exploit. | |||||
| CVE-2025-61664 | 2026-06-30 | N/A | 4.9 MEDIUM | ||
| A vulnerability in the GRUB2 bootloader has been identified in the normal module. This flaw, a memory Use After Free issue, occurs because the normal_exit command is not properly unregistered when its related module is unloaded. An attacker can exploit this condition by invoking the command after the module has been removed, causing the system to improperly access a previously freed memory location. This leads to a system crash or possible impacts in data confidentiality and integrity. | |||||
| CVE-2025-61663 | 2026-06-30 | N/A | 4.9 MEDIUM | ||
| A vulnerability has been identified in the GRUB2 bootloader's normal command that poses an immediate Denial of Service (DoS) risk. This flaw is a Use-after-Free issue, caused because the normal command is not properly unregistered when the module is unloaded. An attacker who can execute this command can force the system to access memory locations that are no longer valid. Successful exploitation leads directly to system instability, which can result in a complete crash and halt system availability. Impact on the data integrity and confidentiality is also not discarded. | |||||
| CVE-2025-54771 | 2026-06-30 | N/A | 4.9 MEDIUM | ||
| A use-after-free vulnerability has been identified in the GNU GRUB (Grand Unified Bootloader). The flaw occurs because the file-closing process incorrectly retains a memory pointer, leaving an invalid reference to a file system structure. An attacker could exploit this vulnerability to cause grub to crash, leading to a Denial of Service. Possible data integrity or confidentiality compromise is not discarded. | |||||
| CVE-2025-54770 | 2026-06-30 | N/A | 4.9 MEDIUM | ||
| A vulnerability has been identified in the GRUB2 bootloader's network module that poses an immediate Denial of Service (DoS) risk. This flaw is a Use-after-Free issue, caused because the net_set_vlan command is not properly unregistered when the network module is unloaded from memory. An attacker who can execute this command can force the system to access memory locations that are no longer valid. Successful exploitation leads directly to system instability, which can result in a complete crash and halt system availability | |||||
| CVE-2025-10911 | 2026-06-30 | N/A | 5.5 MEDIUM | ||
| A use-after-free vulnerability was found in libxslt while parsing xsl nodes that may lead to the dereference of expired pointers and application crash. | |||||
| CVE-2026-57435 | 1 Nokogiri | 1 Nokogiri | 2026-06-26 | N/A | 7.5 HIGH |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri’s CRuby native extension could leave a Ruby wrapper pointing to freed memory when replacing the value of an XML attribute. If Ruby code had already accessed an attribute child node, Nokogiri::XML::Attr#value= could free the underlying native child node while the wrapper remained reachable through the document node cache. A later use of the freed child node or a Ruby GC mark could dereference an invalid pointer, causing an invalid read and a possible segfault. This vulnerability is fixed in 1.19.4. | |||||
| CVE-2026-7111 | 1 Hmbrand | 1 Text\ | 2026-06-25 | N/A | 8.4 HIGH |
| Text::CSV_XS versions before 1.62 for Perl have a use-after-free when registered callbacks extend the Perl argument stack, which may enable type confusion or memory corruption. The Parse, print, getline, and getline_all methods invoke registered callbacks (for example after_parse, before_print, or on_error) and cache the Perl argument stack pointer across the call. If a callback extends the argument stack enough to trigger a reallocation, the return value is written through the stale pointer into the freed buffer, and the caller reads the original $self argument as the return value instead. Calling code that expects parsed data from getline_all receives the Text::CSV_XS object in its place, leading to logic errors or crashes. Text::CSV_XS objects used without any registered callbacks are not affected. | |||||