Total
593 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-36936 | 1 Linux | 1 Linux Kernel | 2025-09-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: efi/unaccepted: touch soft lockup during memory accept Commit 50e782a86c98 ("efi/unaccepted: Fix soft lockups caused by parallel memory acceptance") has released the spinlock so other CPUs can do memory acceptance in parallel and not triggers softlockup on other CPUs. However the softlock up was intermittent shown up if the memory of the TD guest is large, and the timeout of softlockup is set to 1 second: RIP: 0010:_raw_spin_unlock_irqrestore Call Trace: ? __hrtimer_run_queues <IRQ> ? hrtimer_interrupt ? watchdog_timer_fn ? __sysvec_apic_timer_interrupt ? __pfx_watchdog_timer_fn ? sysvec_apic_timer_interrupt </IRQ> ? __hrtimer_run_queues <TASK> ? hrtimer_interrupt ? asm_sysvec_apic_timer_interrupt ? _raw_spin_unlock_irqrestore ? __sysvec_apic_timer_interrupt ? sysvec_apic_timer_interrupt accept_memory try_to_accept_memory do_huge_pmd_anonymous_page get_page_from_freelist __handle_mm_fault __alloc_pages __folio_alloc ? __tdx_hypercall handle_mm_fault vma_alloc_folio do_user_addr_fault do_huge_pmd_anonymous_page exc_page_fault ? __do_huge_pmd_anonymous_page asm_exc_page_fault __handle_mm_fault When the local irq is enabled at the end of accept_memory(), the softlockup detects that the watchdog on single CPU has not been fed for a while. That is to say, even other CPUs will not be blocked by spinlock, the current CPU might be stunk with local irq disabled for a while, which hurts not only nmi watchdog but also softlockup. Chao Gao pointed out that the memory accept could be time costly and there was similar report before. Thus to avoid any softlocup detection during this stage, give the softlockup a flag to skip the timeout check at the end of accept_memory(), by invoking touch_softlockup_watchdog(). | |||||
| CVE-2022-48760 | 1 Linux | 1 Linux Kernel | 2025-09-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix hang in usb_kill_urb by adding memory barriers The syzbot fuzzer has identified a bug in which processes hang waiting for usb_kill_urb() to return. It turns out the issue is not unlinking the URB; that works just fine. Rather, the problem arises when the wakeup notification that the URB has completed is not received. The reason is memory-access ordering on SMP systems. In outline form, usb_kill_urb() and __usb_hcd_giveback_urb() operating concurrently on different CPUs perform the following actions: CPU 0 CPU 1 ---------------------------- --------------------------------- usb_kill_urb(): __usb_hcd_giveback_urb(): ... ... atomic_inc(&urb->reject); atomic_dec(&urb->use_count); ... ... wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0); if (atomic_read(&urb->reject)) wake_up(&usb_kill_urb_queue); Confining your attention to urb->reject and urb->use_count, you can see that the overall pattern of accesses on CPU 0 is: write urb->reject, then read urb->use_count; whereas the overall pattern of accesses on CPU 1 is: write urb->use_count, then read urb->reject. This pattern is referred to in memory-model circles as SB (for "Store Buffering"), and it is well known that without suitable enforcement of the desired order of accesses -- in the form of memory barriers -- it is entirely possible for one or both CPUs to execute their reads ahead of their writes. The end result will be that sometimes CPU 0 sees the old un-decremented value of urb->use_count while CPU 1 sees the old un-incremented value of urb->reject. Consequently CPU 0 ends up on the wait queue and never gets woken up, leading to the observed hang in usb_kill_urb(). The same pattern of accesses occurs in usb_poison_urb() and the failure pathway of usb_hcd_submit_urb(). The problem is fixed by adding suitable memory barriers. To provide proper memory-access ordering in the SB pattern, a full barrier is required on both CPUs. The atomic_inc() and atomic_dec() accesses themselves don't provide any memory ordering, but since they are present, we can use the optimized smp_mb__after_atomic() memory barrier in the various routines to obtain the desired effect. This patch adds the necessary memory barriers. | |||||
| CVE-2024-26916 | 1 Linux | 1 Linux Kernel | 2025-09-16 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amd: flush any delayed gfxoff on suspend entry" commit ab4750332dbe ("drm/amdgpu/sdma5.2: add begin/end_use ring callbacks") caused GFXOFF control to be used more heavily and the codepath that was removed from commit 0dee72639533 ("drm/amd: flush any delayed gfxoff on suspend entry") now can be exercised at suspend again. Users report that by using GNOME to suspend the lockscreen trigger will cause SDMA traffic and the system can deadlock. This reverts commit 0dee726395333fea833eaaf838bc80962df886c8. | |||||
| CVE-2025-20044 | 2025-08-13 | N/A | 4.1 MEDIUM | ||
| Improper locking for some Intel(R) TDX Module firmware before version 1.5.13 may allow a privileged user to potentially enable escalation of privilege via local access. | |||||
| CVE-2025-1221 | 2025-07-31 | N/A | N/A | ||
| A Zigbee Radio Co-Processor (RCP), which is using SiLabs EmberZNet Zigbee stack, was unable to send messages to the host system (CPCd) due to heavy Zigbee traffic, resulting in a Denial of Service (DoS) attack, Only hard reset will bring the device to normal operation | |||||
| CVE-2024-26775 | 1 Linux | 1 Linux Kernel | 2025-07-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: aoe: avoid potential deadlock at set_capacity Move set_capacity() outside of the section procected by (&d->lock). To avoid possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- [1] lock(&bdev->bd_size_lock); local_irq_disable(); [2] lock(&d->lock); [3] lock(&bdev->bd_size_lock); <Interrupt> [4] lock(&d->lock); *** DEADLOCK *** Where [1](&bdev->bd_size_lock) hold by zram_add()->set_capacity(). [2]lock(&d->lock) hold by aoeblk_gdalloc(). And aoeblk_gdalloc() is trying to acquire [3](&bdev->bd_size_lock) at set_capacity() call. In this situation an attempt to acquire [4]lock(&d->lock) from aoecmd_cfg_rsp() will lead to deadlock. So the simplest solution is breaking lock dependency [2](&d->lock) -> [3](&bdev->bd_size_lock) by moving set_capacity() outside. | |||||
| CVE-2020-36775 | 1 Linux | 1 Linux Kernel | 2025-07-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential deadlock Using f2fs_trylock_op() in f2fs_write_compressed_pages() to avoid potential deadlock like we did in f2fs_write_single_data_page(). | |||||
| CVE-2025-27732 | 1 Microsoft | 15 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 12 more | 2025-07-08 | N/A | 7.0 HIGH |
| Sensitive data storage in improperly locked memory in Windows Win32K - GRFX allows an authorized attacker to elevate privileges locally. | |||||
| CVE-2025-37802 | 1 Linux | 1 Linux Kernel | 2025-06-05 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix WARNING "do not call blocking ops when !TASK_RUNNING" wait_event_timeout() will set the state of the current task to TASK_UNINTERRUPTIBLE, before doing the condition check. This means that ksmbd_durable_scavenger_alive() will try to acquire the mutex while already in a sleeping state. The scheduler warns us by giving the following warning: do not call blocking ops when !TASK_RUNNING; state=2 set at [<0000000061515a6f>] prepare_to_wait_event+0x9f/0x6c0 WARNING: CPU: 2 PID: 4147 at kernel/sched/core.c:10099 __might_sleep+0x12f/0x160 mutex lock is not needed in ksmbd_durable_scavenger_alive(). | |||||
| CVE-2024-38664 | 1 Linux | 1 Linux Kernel | 2025-05-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_dpsub: Always register bridge We must always register the DRM bridge, since zynqmp_dp_hpd_work_func calls drm_bridge_hpd_notify, which in turn expects hpd_mutex to be initialized. We do this before zynqmp_dpsub_drm_init since that calls drm_bridge_attach. This fixes the following lockdep warning: [ 19.217084] ------------[ cut here ]------------ [ 19.227530] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 19.227768] WARNING: CPU: 0 PID: 140 at kernel/locking/mutex.c:582 __mutex_lock+0x4bc/0x550 [ 19.241696] Modules linked in: [ 19.244937] CPU: 0 PID: 140 Comm: kworker/0:4 Not tainted 6.6.20+ #96 [ 19.252046] Hardware name: xlnx,zynqmp (DT) [ 19.256421] Workqueue: events zynqmp_dp_hpd_work_func [ 19.261795] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 19.269104] pc : __mutex_lock+0x4bc/0x550 [ 19.273364] lr : __mutex_lock+0x4bc/0x550 [ 19.277592] sp : ffffffc085c5bbe0 [ 19.281066] x29: ffffffc085c5bbe0 x28: 0000000000000000 x27: ffffff88009417f8 [ 19.288624] x26: ffffff8800941788 x25: ffffff8800020008 x24: ffffffc082aa3000 [ 19.296227] x23: ffffffc080d90e3c x22: 0000000000000002 x21: 0000000000000000 [ 19.303744] x20: 0000000000000000 x19: ffffff88002f5210 x18: 0000000000000000 [ 19.311295] x17: 6c707369642e3030 x16: 3030613464662072 x15: 0720072007200720 [ 19.318922] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 0000000000000001 [ 19.326442] x11: 0001ffc085c5b940 x10: 0001ff88003f388b x9 : 0001ff88003f3888 [ 19.334003] x8 : 0001ff88003f3888 x7 : 0000000000000000 x6 : 0000000000000000 [ 19.341537] x5 : 0000000000000000 x4 : 0000000000001668 x3 : 0000000000000000 [ 19.349054] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff88003f3880 [ 19.356581] Call trace: [ 19.359160] __mutex_lock+0x4bc/0x550 [ 19.363032] mutex_lock_nested+0x24/0x30 [ 19.367187] drm_bridge_hpd_notify+0x2c/0x6c [ 19.371698] zynqmp_dp_hpd_work_func+0x44/0x54 [ 19.376364] process_one_work+0x3ac/0x988 [ 19.380660] worker_thread+0x398/0x694 [ 19.384736] kthread+0x1bc/0x1c0 [ 19.388241] ret_from_fork+0x10/0x20 [ 19.392031] irq event stamp: 183 [ 19.395450] hardirqs last enabled at (183): [<ffffffc0800b9278>] finish_task_switch.isra.0+0xa8/0x2d4 [ 19.405140] hardirqs last disabled at (182): [<ffffffc081ad3754>] __schedule+0x714/0xd04 [ 19.413612] softirqs last enabled at (114): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.423128] softirqs last disabled at (110): [<ffffffc080133de8>] srcu_invoke_callbacks+0x158/0x23c [ 19.432614] ---[ end trace 0000000000000000 ]--- (cherry picked from commit 61ba791c4a7a09a370c45b70a81b8c7d4cf6b2ae) | |||||
| CVE-2022-32811 | 1 Apple | 2 Mac Os X, Macos | 2025-05-29 | N/A | 7.8 HIGH |
| A memory corruption vulnerability was addressed with improved locking. This issue is fixed in macOS Monterey 12.5, macOS Big Sur 11.6.8, Security Update 2022-005 Catalina. An app may be able to execute arbitrary code with kernel privileges. | |||||
| CVE-2022-3303 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-21 | N/A | 4.7 MEDIUM |
| A race condition flaw was found in the Linux kernel sound subsystem due to improper locking. It could lead to a NULL pointer dereference while handling the SNDCTL_DSP_SYNC ioctl. A privileged local user (root or member of the audio group) could use this flaw to crash the system, resulting in a denial of service condition | |||||
| CVE-2024-45818 | 1 Xen | 1 Xen | 2025-05-20 | N/A | 6.5 MEDIUM |
| The hypervisor contains code to accelerate VGA memory accesses for HVM guests, when the (virtual) VGA is in "standard" mode. Locking involved there has an unusual discipline, leaving a lock acquired past the return from the function that acquired it. This behavior results in a problem when emulating an instruction with two memory accesses, both of which touch VGA memory (plus some further constraints which aren't relevant here). When emulating the 2nd access, the lock that is already being held would be attempted to be re-acquired, resulting in a deadlock. This deadlock was already found when the code was first introduced, but was analysed incorrectly and the fix was incomplete. Analysis in light of the new finding cannot find a way to make the existing locking discipline work. In staging, this logic has all been removed because it was discovered to be accidentally disabled since Xen 4.7. Therefore, we are fixing the locking problem by backporting the removal of most of the feature. Note that even with the feature disabled, the lock would still be acquired for any accesses to the VGA MMIO region. | |||||
| CVE-2025-20047 | 2025-05-16 | N/A | 5.7 MEDIUM | ||
| Improper locking in the Intel(R) Integrated Connectivity I/O interface (CNVi) for some Intel(R) Core™ Ultra Processors may allow an unauthenticated user to potentially enable escalation of privilege via physical access. | |||||
| CVE-2022-38690 | 2 Google, Unisoc | 14 Android, S8000, Sc7731e and 11 more | 2025-05-15 | N/A | 5.5 MEDIUM |
| In camera driver, there is a possible memory corruption due to improper locking. This could lead to local denial of service in kernel. | |||||
| CVE-2021-47317 | 1 Linux | 1 Linux Kernel | 2025-05-12 | N/A | 3.3 LOW |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf: Fix detecting BPF atomic instructions Commit 91c960b0056672 ("bpf: Rename BPF_XADD and prepare to encode other atomics in .imm") converted BPF_XADD to BPF_ATOMIC and added a way to distinguish instructions based on the immediate field. Existing JIT implementations were updated to check for the immediate field and to reject programs utilizing anything more than BPF_ADD (such as BPF_FETCH) in the immediate field. However, the check added to powerpc64 JIT did not look at the correct BPF instruction. Due to this, such programs would be accepted and incorrectly JIT'ed resulting in soft lockups, as seen with the atomic bounds test. Fix this by looking at the correct immediate value. | |||||
| CVE-2021-0147 | 1 Intel | 1 Power Management Controller | 2025-05-05 | 2.1 LOW | 4.4 MEDIUM |
| Improper locking in the Power Management Controller (PMC) for some Intel Chipset firmware before versions pmc_fw_lbg_c1-21ww02a and pmc_fw_lbg_b0-21ww02a may allow a privileged user to potentially enable denial of service via local access. | |||||
| CVE-2021-47192 | 1 Linux | 1 Linux Kernel | 2025-04-30 | N/A | 5.3 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: sysfs: Fix hang when device state is set via sysfs This fixes a regression added with: commit f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device") The problem is that after iSCSI recovery, iscsid will call into the kernel to set the dev's state to running, and with that patch we now call scsi_rescan_device() with the state_mutex held. If the SCSI error handler thread is just starting to test the device in scsi_send_eh_cmnd() then it's going to try to grab the state_mutex. We are then stuck, because when scsi_rescan_device() tries to send its I/O scsi_queue_rq() calls -> scsi_host_queue_ready() -> scsi_host_in_recovery() which will return true (the host state is still in recovery) and I/O will just be requeued. scsi_send_eh_cmnd() will then never be able to grab the state_mutex to finish error handling. To prevent the deadlock move the rescan-related code to after we drop the state_mutex. This also adds a check for if we are already in the running state. This prevents extra scans and helps the iscsid case where if the transport class has already onlined the device during its recovery process then we don't need userspace to do it again plus possibly block that daemon. | |||||
| CVE-2022-39131 | 2 Google, Unisoc | 14 Android, S8000, Sc7731e and 11 more | 2025-04-24 | N/A | 5.5 MEDIUM |
| In camera driver, there is a possible memory corruption due to improper locking. This could lead to local denial of service in kernel. | |||||
| CVE-2022-42775 | 2 Google, Unisoc | 14 Android, S8000, Sc7731e and 11 more | 2025-04-23 | N/A | 5.5 MEDIUM |
| In camera driver, there is a possible memory corruption due to improper locking. This could lead to local denial of service in kernel. | |||||