Total
7843 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-43027 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_helper: pass helper to expect cleanup nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy() to remove expectations belonging to the helper being unregistered. However, it passes NULL instead of the helper pointer as the data argument, so expect_iter_me() never matches any expectation and all of them survive the cleanup. After unregister returns, nfnl_cthelper_del() frees the helper object immediately. Subsequent expectation dumps or packet-driven init_conntrack() calls then dereference the freed exp->helper, causing a use-after-free. Pass the actual helper pointer so expectations referencing it are properly destroyed before the helper object is freed. BUG: KASAN: slab-use-after-free in string+0x38f/0x430 Read of size 1 at addr ffff888003b14d20 by task poc/103 Call Trace: string+0x38f/0x430 vsnprintf+0x3cc/0x1170 seq_printf+0x17a/0x240 exp_seq_show+0x2e5/0x560 seq_read_iter+0x419/0x1280 proc_reg_read+0x1ac/0x270 vfs_read+0x179/0x930 ksys_read+0xef/0x1c0 Freed by task 103: The buggy address is located 32 bytes inside of freed 192-byte region [ffff888003b14d00, ffff888003b14dc0) | |||||
| CVE-2026-31669 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix slab-use-after-free in __inet_lookup_established The ehash table lookups are lockless and rely on SLAB_TYPESAFE_BY_RCU to guarantee socket memory stability during RCU read-side critical sections. Both tcp_prot and tcpv6_prot have their slab caches created with this flag via proto_register(). However, MPTCP's mptcp_subflow_init() copies tcpv6_prot into tcpv6_prot_override during inet_init() (fs_initcall, level 5), before inet6_init() (module_init/device_initcall, level 6) has called proto_register(&tcpv6_prot). At that point, tcpv6_prot.slab is still NULL, so tcpv6_prot_override.slab remains NULL permanently. This causes MPTCP v6 subflow child sockets to be allocated via kmalloc (falling into kmalloc-4k) instead of the TCPv6 slab cache. The kmalloc-4k cache lacks SLAB_TYPESAFE_BY_RCU, so when these sockets are freed without SOCK_RCU_FREE (which is cleared for child sockets by design), the memory can be immediately reused. Concurrent ehash lookups under rcu_read_lock can then access freed memory, triggering a slab-use-after-free in __inet_lookup_established. Fix this by splitting the IPv6-specific initialization out of mptcp_subflow_init() into a new mptcp_subflow_v6_init(), called from mptcp_proto_v6_init() before protocol registration. This ensures tcpv6_prot_override.slab correctly inherits the SLAB_TYPESAFE_BY_RCU slab cache. | |||||
| CVE-2026-31665 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix use-after-free in timeout object destroy nft_ct_timeout_obj_destroy() frees the timeout object with kfree() immediately after nf_ct_untimeout(), without waiting for an RCU grace period. Concurrent packet processing on other CPUs may still hold RCU-protected references to the timeout object obtained via rcu_dereference() in nf_ct_timeout_data(). Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer freeing until after an RCU grace period, matching the approach already used in nfnetlink_cttimeout.c. KASAN report: BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0 Read of size 4 at addr ffff8881035fe19c by task exploit/80 Call Trace: nf_conntrack_tcp_packet+0x1381/0x29d0 nf_conntrack_in+0x612/0x8b0 nf_hook_slow+0x70/0x100 __ip_local_out+0x1b2/0x210 tcp_sendmsg_locked+0x722/0x1580 __sys_sendto+0x2d8/0x320 Allocated by task 75: nft_ct_timeout_obj_init+0xf6/0x290 nft_obj_init+0x107/0x1b0 nf_tables_newobj+0x680/0x9c0 nfnetlink_rcv_batch+0xc29/0xe00 Freed by task 26: nft_obj_destroy+0x3f/0xa0 nf_tables_trans_destroy_work+0x51c/0x5c0 process_one_work+0x2c4/0x5a0 | |||||
| CVE-2026-31533 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: net/tls: fix use-after-free in -EBUSY error path of tls_do_encryption The -EBUSY handling in tls_do_encryption(), introduced by commit 859054147318 ("net: tls: handle backlogging of crypto requests"), has a use-after-free due to double cleanup of encrypt_pending and the scatterlist entry. When crypto_aead_encrypt() returns -EBUSY, the request is enqueued to the cryptd backlog and the async callback tls_encrypt_done() will be invoked upon completion. That callback unconditionally restores the scatterlist entry (sge->offset, sge->length) and decrements ctx->encrypt_pending. However, if tls_encrypt_async_wait() returns an error, the synchronous error path in tls_do_encryption() performs the same cleanup again, double-decrementing encrypt_pending and double-restoring the scatterlist. The double-decrement corrupts the encrypt_pending sentinel (initialized to 1), making tls_encrypt_async_wait() permanently skip the wait for pending async callbacks. A subsequent sendmsg can then free the tls_rec via bpf_exec_tx_verdict() while a cryptd callback is still pending, resulting in a use-after-free when the callback fires on the freed record. Fix this by skipping the synchronous cleanup when the -EBUSY async wait returns an error, since the callback has already handled encrypt_pending and sge restoration. | |||||
| CVE-2026-31504 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: fix fanout UAF in packet_release() via NETDEV_UP race `packet_release()` has a race window where `NETDEV_UP` can re-register a socket into a fanout group's `arr[]` array. The re-registration is not cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout array. `packet_release()` does NOT zero `po->num` in its `bind_lock` section. After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex` still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)` that already found the socket in `sklist` can re-register the hook. For fanout sockets, this re-registration calls `__fanout_link(sk, po)` which adds the socket back into `f->arr[]` and increments `f->num_members`, but does NOT increment `f->sk_ref`. The fix sets `po->num` to zero in `packet_release` while `bind_lock` is held to prevent NETDEV_UP from linking, preventing the race window. This bug was found following an additional audit with Claude Code based on CVE-2025-38617. | |||||
| CVE-2026-31485 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-lpspi: fix teardown order issue (UAF) There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from devm_spi_register_controller() to spi_register_controller() in fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in fsl_lpspi_remove(). | |||||
| CVE-2026-31469 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false A UAF issue occurs when the virtio_net driver is configured with napi_tx=N and the device's IFF_XMIT_DST_RELEASE flag is cleared (e.g., during the configuration of tc route filter rules). When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack expects the driver to hold the reference to skb->dst until the packet is fully transmitted and freed. In virtio_net with napi_tx=N, skbs may remain in the virtio transmit ring for an extended period. If the network namespace is destroyed while these skbs are still pending, the corresponding dst_ops structure has freed. When a subsequent packet is transmitted, free_old_xmit() is triggered to clean up old skbs. It then calls dst_release() on the skb associated with the stale dst_entry. Since the dst_ops (referenced by the dst_entry) has already been freed, a UAF kernel paging request occurs. fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release the dst reference before the skb is queued in virtio_net. Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ... Reproduction Steps: NETDEV="enp3s0" config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100 } test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns } config_qdisc_route_filter test_ns sleep 2 test_ns | |||||
| CVE-2026-31446 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in update_super_work when racing with umount Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups reads during unmount. However, this introduced a use-after-free because update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which accesses the kobject's kernfs_node after it has been freed by kobject_del() in ext4_unregister_sysfs(): update_super_work ext4_put_super ----------------- -------------- ext4_unregister_sysfs(sb) kobject_del(&sbi->s_kobj) __kobject_del() sysfs_remove_dir() kobj->sd = NULL sysfs_put(sd) kernfs_put() // RCU free ext4_notify_error_sysfs(sbi) sysfs_notify(&sbi->s_kobj) kn = kobj->sd // stale pointer kernfs_get(kn) // UAF on freed kernfs_node ext4_journal_destroy() flush_work(&sbi->s_sb_upd_work) Instead of reordering the teardown sequence, fix this by making ext4_notify_error_sysfs() detect that sysfs has already been torn down by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call in that case. A dedicated mutex (s_error_notify_mutex) serializes ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs() to prevent TOCTOU races where the kobject could be deleted between the state_in_sysfs check and the sysfs_notify() call. | |||||
| CVE-2026-31396 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: fix use-after-free access to PTP clock PTP clock is registered on every opening of the interface and destroyed on every closing. However it may be accessed via get_ts_info ethtool call which is possible while the interface is just present in the kernel. BUG: KASAN: use-after-free in ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426 Read of size 4 at addr ffff8880194345cc by task syz.0.6/948 CPU: 1 PID: 948 Comm: syz.0.6 Not tainted 6.1.164+ #109 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106 print_address_description mm/kasan/report.c:316 [inline] print_report+0x17f/0x496 mm/kasan/report.c:420 kasan_report+0xd9/0x180 mm/kasan/report.c:524 ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426 gem_get_ts_info+0x138/0x1e0 drivers/net/ethernet/cadence/macb_main.c:3349 macb_get_ts_info+0x68/0xb0 drivers/net/ethernet/cadence/macb_main.c:3371 __ethtool_get_ts_info+0x17c/0x260 net/ethtool/common.c:558 ethtool_get_ts_info net/ethtool/ioctl.c:2367 [inline] __dev_ethtool net/ethtool/ioctl.c:3017 [inline] dev_ethtool+0x2b05/0x6290 net/ethtool/ioctl.c:3095 dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510 sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215 sock_ioctl+0x577/0x6d0 net/socket.c:1320 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:46 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 </TASK> Allocated by task 457: kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:699 [inline] ptp_clock_register+0x144/0x10e0 drivers/ptp/ptp_clock.c:235 gem_ptp_init+0x46f/0x930 drivers/net/ethernet/cadence/macb_ptp.c:375 macb_open+0x901/0xd10 drivers/net/ethernet/cadence/macb_main.c:2920 __dev_open+0x2ce/0x500 net/core/dev.c:1501 __dev_change_flags+0x56a/0x740 net/core/dev.c:8651 dev_change_flags+0x92/0x170 net/core/dev.c:8722 do_setlink+0xaf8/0x3a80 net/core/rtnetlink.c:2833 __rtnl_newlink+0xbf4/0x1940 net/core/rtnetlink.c:3608 rtnl_newlink+0x63/0xa0 net/core/rtnetlink.c:3655 rtnetlink_rcv_msg+0x3c6/0xed0 net/core/rtnetlink.c:6150 netlink_rcv_skb+0x15d/0x430 net/netlink/af_netlink.c:2511 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x6d7/0xa30 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x97e/0xeb0 net/netlink/af_netlink.c:1872 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x14b/0x180 net/socket.c:730 __sys_sendto+0x320/0x3b0 net/socket.c:2152 __do_sys_sendto net/socket.c:2164 [inline] __se_sys_sendto net/socket.c:2160 [inline] __x64_sys_sendto+0xdc/0x1b0 net/socket.c:2160 do_syscall_x64 arch/x86/entry/common.c:46 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 938: kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1729 [inline] slab_free_freelist_hook mm/slub.c:1755 [inline] slab_free mm/slub.c:3687 [inline] __kmem_cache_free+0xbc/0x320 mm/slub.c:3700 device_release+0xa0/0x240 drivers/base/core.c:2507 kobject_cleanup lib/kobject.c:681 [inline] kobject_release lib/kobject.c:712 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1cd/0x350 lib/kobject.c:729 put_device+0x1b/0x30 drivers/base/core.c:3805 ptp_clock_unregister+0x171/0x270 drivers/ptp/ptp_clock.c:391 gem_ptp_remove+0x4e/0x1f0 drivers/net/ethernet/cadence/macb_ptp.c:404 macb_close+0x1c8/0x270 drivers/net/ethernet/cadence/macb_main.c:2966 __dev_close_many+0x1b9/0x310 net/core/dev.c:1585 __dev_close net/core/dev.c:1597 [inline] __dev_change_flags+0x2bb/0x740 net/core/dev.c:8649 dev_change_fl ---truncated--- | |||||
| CVE-2026-23392 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: release flowtable after rcu grace period on error Call synchronize_rcu() after unregistering the hooks from error path, since a hook that already refers to this flowtable can be already registered, exposing this flowtable to packet path and nfnetlink_hook control plane. This error path is rare, it should only happen by reaching the maximum number hooks or by failing to set up to hardware offload, just call synchronize_rcu(). There is a check for already used device hooks by different flowtable that could result in EEXIST at this late stage. The hook parser can be updated to perform this check earlier to this error path really becomes rarely exercised. Uncovered by KASAN reported as use-after-free from nfnetlink_hook path when dumping hooks. | |||||
| CVE-2026-23351 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: split gc into unlink and reclaim phase Yiming Qian reports Use-after-free in the pipapo set type: Under a large number of expired elements, commit-time GC can run for a very long time in a non-preemptible context, triggering soft lockup warnings and RCU stall reports (local denial of service). We must split GC in an unlink and a reclaim phase. We cannot queue elements for freeing until pointers have been swapped. Expired elements are still exposed to both the packet path and userspace dumpers via the live copy of the data structure. call_rcu() does not protect us: dump operations or element lookups starting after call_rcu has fired can still observe the free'd element, unless the commit phase has made enough progress to swap the clone and live pointers before any new reader has picked up the old version. This a similar approach as done recently for the rbtree backend in commit 35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert"). | |||||
| CVE-2026-23340 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs When shrinking the number of real tx queues, netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush qdiscs for queues which will no longer be used. qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with qdisc_lock(). However, for lockless qdiscs, the dequeue path is serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so qdisc_reset() can run concurrently with __qdisc_run() and free skbs while they are still being dequeued, leading to UAF. This can easily be reproduced on e.g. virtio-net by imposing heavy traffic while frequently changing the number of queue pairs: iperf3 -ub0 -c $peer -t 0 & while :; do ethtool -L eth0 combined 1 ethtool -L eth0 combined 2 done With KASAN enabled, this leads to reports like: BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760 ... Call Trace: <TASK> ... __qdisc_run+0x133f/0x1760 __dev_queue_xmit+0x248f/0x3550 ip_finish_output2+0xa42/0x2110 ip_output+0x1a7/0x410 ip_send_skb+0x2e6/0x480 udp_send_skb+0xb0a/0x1590 udp_sendmsg+0x13c9/0x1fc0 ... </TASK> Allocated by task 1270 on cpu 5 at 44.558414s: ... alloc_skb_with_frags+0x84/0x7c0 sock_alloc_send_pskb+0x69a/0x830 __ip_append_data+0x1b86/0x48c0 ip_make_skb+0x1e8/0x2b0 udp_sendmsg+0x13a6/0x1fc0 ... Freed by task 1306 on cpu 3 at 44.558445s: ... kmem_cache_free+0x117/0x5e0 pfifo_fast_reset+0x14d/0x580 qdisc_reset+0x9e/0x5f0 netif_set_real_num_tx_queues+0x303/0x840 virtnet_set_channels+0x1bf/0x260 [virtio_net] ethnl_set_channels+0x684/0xae0 ethnl_default_set_doit+0x31a/0x890 ... Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the serialization model already used by dev_reset_queue(). Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state reflects an empty queue, avoiding needless re-scheduling. | |||||
| CVE-2026-23319 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shim The root cause of this bug is that when 'bpf_link_put' reduces the refcount of 'shim_link->link.link' to zero, the resource is considered released but may still be referenced via 'tr->progs_hlist' in 'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in 'bpf_shim_tramp_link_release' is deferred. During this window, another process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'. Based on Martin KaFai Lau's suggestions, I have created a simple patch. To fix this: Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'. Only increment the refcount if it is not already zero. Testing: I verified the fix by adding a delay in 'bpf_shim_tramp_link_release' to make the bug easier to trigger: static void bpf_shim_tramp_link_release(struct bpf_link *link) { /* ... */ if (!shim_link->trampoline) return; + msleep(100); WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link, shim_link->trampoline, NULL)); bpf_trampoline_put(shim_link->trampoline); } Before the patch, running a PoC easily reproduced the crash(almost 100%) with a call trace similar to KaiyanM's report. After the patch, the bug no longer occurs even after millions of iterations. | |||||
| CVE-2026-23273 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: observe an RCU grace period in macvlan_common_newlink() error path valis reported that a race condition still happens after my prior patch. macvlan_common_newlink() might have made @dev visible before detecting an error, and its caller will directly call free_netdev(dev). We must respect an RCU period, either in macvlan or the core networking stack. After adding a temporary mdelay(1000) in macvlan_forward_source_one() to open the race window, valis repro was: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source (ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 &) ; sleep 0.5 ; ping -c1 -I p1 1.2.3.4 PING 1.2.3.4 (1.2.3.4): 56 data bytes RTNETLINK answers: Invalid argument BUG: KASAN: slab-use-after-free in macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) Read of size 8 at addr ffff888016bb89c0 by task e/175 CPU: 1 UID: 1000 PID: 175 Comm: e Not tainted 6.19.0-rc8+ #33 NONE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) kasan_report (mm/kasan/report.c:597) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) ? tasklet_init (kernel/softirq.c:983) macvlan_handle_frame (drivers/net/macvlan.c:501) Allocated by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) __kasan_kmalloc (mm/kasan/common.c:419) __kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5657 mm/slub.c:7140) alloc_netdev_mqs (net/core/dev.c:12012) rtnl_create_link (net/core/rtnetlink.c:3648) rtnl_newlink (net/core/rtnetlink.c:3830 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) Freed by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kfree (mm/slub.c:6674 mm/slub.c:6882) rtnl_newlink (net/core/rtnetlink.c:3845 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) | |||||
| CVE-2026-23270 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks As Paolo said earlier [1]: "Since the blamed commit below, classify can return TC_ACT_CONSUMED while the current skb being held by the defragmentation engine. As reported by GangMin Kim, if such packet is that may cause a UaF when the defrag engine later on tries to tuch again such packet." act_ct was never meant to be used in the egress path, however some users are attaching it to egress today [2]. Attempting to reach a middle ground, we noticed that, while most qdiscs are not handling TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we address the issue by only allowing act_ct to bind to clsact/ingress qdiscs and shared blocks. That way it's still possible to attach act_ct to egress (albeit only with clsact). [1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/ [2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ | |||||
| CVE-2026-23231 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix use-after-free in nf_tables_addchain() nf_tables_addchain() publishes the chain to table->chains via list_add_tail_rcu() (in nft_chain_add()) before registering hooks. If nf_tables_register_hook() then fails, the error path calls nft_chain_del() (list_del_rcu()) followed by nf_tables_chain_destroy() with no RCU grace period in between. This creates two use-after-free conditions: 1) Control-plane: nf_tables_dump_chains() traverses table->chains under rcu_read_lock(). A concurrent dump can still be walking the chain when the error path frees it. 2) Packet path: for NFPROTO_INET, nf_register_net_hook() briefly installs the IPv4 hook before IPv6 registration fails. Packets entering nft_do_chain() via the transient IPv4 hook can still be dereferencing chain->blob_gen_X when the error path frees the chain. Add synchronize_rcu() between nft_chain_del() and the chain destroy so that all RCU readers -- both dump threads and in-flight packet evaluation -- have finished before the chain is freed. | |||||
| CVE-2026-23010 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix use-after-free in inet6_addr_del(). syzbot reported use-after-free of inet6_ifaddr in inet6_addr_del(). [0] The cited commit accidentally moved ipv6_del_addr() for mngtmpaddr before reading its ifp->flags for temporary addresses in inet6_addr_del(). Let's move ipv6_del_addr() down to fix the UAF. [0]: BUG: KASAN: slab-use-after-free in inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117 Read of size 4 at addr ffff88807b89c86c by task syz.3.1618/9593 CPU: 0 UID: 0 PID: 9593 Comm: syz.3.1618 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117 addrconf_del_ifaddr+0x11e/0x190 net/ipv6/addrconf.c:3181 inet6_ioctl+0x1e5/0x2b0 net/ipv6/af_inet6.c:582 sock_do_ioctl+0x118/0x280 net/socket.c:1254 sock_ioctl+0x227/0x6b0 net/socket.c:1375 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f164cf8f749 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f164de64038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f164d1e5fa0 RCX: 00007f164cf8f749 RDX: 0000200000000000 RSI: 0000000000008936 RDI: 0000000000000003 RBP: 00007f164d013f91 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f164d1e6038 R14: 00007f164d1e5fa0 R15: 00007ffde15c8288 </TASK> Allocated by task 9593: kasan_save_stack+0x33/0x60 mm/kasan/common.c:56 kasan_save_track+0x14/0x30 mm/kasan/common.c:77 poison_kmalloc_redzone mm/kasan/common.c:397 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:414 kmalloc_noprof include/linux/slab.h:957 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] ipv6_add_addr+0x4e3/0x2010 net/ipv6/addrconf.c:1120 inet6_addr_add+0x256/0x9b0 net/ipv6/addrconf.c:3050 addrconf_add_ifaddr+0x1fc/0x450 net/ipv6/addrconf.c:3160 inet6_ioctl+0x103/0x2b0 net/ipv6/af_inet6.c:580 sock_do_ioctl+0x118/0x280 net/socket.c:1254 sock_ioctl+0x227/0x6b0 net/socket.c:1375 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6099: kasan_save_stack+0x33/0x60 mm/kasan/common.c:56 kasan_save_track+0x14/0x30 mm/kasan/common.c:77 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:252 [inline] __kasan_slab_free+0x5f/0x80 mm/kasan/common.c:284 kasan_slab_free include/linux/kasan.h:234 [inline] slab_free_hook mm/slub.c:2540 [inline] slab_free_freelist_hook mm/slub.c:2569 [inline] slab_free_bulk mm/slub.c:6696 [inline] kmem_cache_free_bulk mm/slub.c:7383 [inline] kmem_cache_free_bulk+0x2bf/0x680 mm/slub.c:7362 kfree_bulk include/linux/slab.h:830 [inline] kvfree_rcu_bulk+0x1b7/0x1e0 mm/slab_common.c:1523 kvfree_rcu_drain_ready mm/slab_common.c:1728 [inline] kfree_rcu_monitor+0x1d0/0x2f0 mm/slab_common.c:1801 process_one_work+0x9ba/0x1b20 kernel/workqueue.c:3257 process_scheduled_works kernel/workqu ---truncated--- | |||||
| CVE-2026-22980 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: provide locking for v4_end_grace Writing to v4_end_grace can race with server shutdown and result in memory being accessed after it was freed - reclaim_str_hashtbl in particularly. We cannot hold nfsd_mutex across the nfsd4_end_grace() call as that is held while client_tracking_op->init() is called and that can wait for an upcall to nfsdcltrack which can write to v4_end_grace, resulting in a deadlock. nfsd4_end_grace() is also called by the landromat work queue and this doesn't require locking as server shutdown will stop the work and wait for it before freeing anything that nfsd4_end_grace() might access. However, we must be sure that writing to v4_end_grace doesn't restart the work item after shutdown has already waited for it. For this we add a new flag protected with nn->client_lock. It is set only while it is safe to make client tracking calls, and v4_end_grace only schedules work while the flag is set with the spinlock held. So this patch adds a nfsd_net field "client_tracking_active" which is set as described. Another field "grace_end_forced", is set when v4_end_grace is written. After this is set, and providing client_tracking_active is set, the laundromat is scheduled. This "grace_end_forced" field bypasses other checks for whether the grace period has finished. This resolves a race which can result in use-after-free. | |||||
| CVE-2025-71162 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: tegra-adma: Fix use-after-free A use-after-free bug exists in the Tegra ADMA driver when audio streams are terminated, particularly during XRUN conditions. The issue occurs when the DMA buffer is freed by tegra_adma_terminate_all() before the vchan completion tasklet finishes accessing it. The race condition follows this sequence: 1. DMA transfer completes, triggering an interrupt that schedules the completion tasklet (tasklet has not executed yet) 2. Audio playback stops, calling tegra_adma_terminate_all() which frees the DMA buffer memory via kfree() 3. The scheduled tasklet finally executes, calling vchan_complete() which attempts to access the already-freed memory Since tasklets can execute at any time after being scheduled, there is no guarantee that the buffer will remain valid when vchan_complete() runs. Fix this by properly synchronizing the virtual channel completion: - Calling vchan_terminate_vdesc() in tegra_adma_stop() to mark the descriptors as terminated instead of freeing the descriptor. - Add the callback tegra_adma_synchronize() that calls vchan_synchronize() which kills any pending tasklets and frees any terminated descriptors. Crash logs: [ 337.427523] BUG: KASAN: use-after-free in vchan_complete+0x124/0x3b0 [ 337.427544] Read of size 8 at addr ffff000132055428 by task swapper/0/0 [ 337.427562] Call trace: [ 337.427564] dump_backtrace+0x0/0x320 [ 337.427571] show_stack+0x20/0x30 [ 337.427575] dump_stack_lvl+0x68/0x84 [ 337.427584] print_address_description.constprop.0+0x74/0x2b8 [ 337.427590] kasan_report+0x1f4/0x210 [ 337.427598] __asan_load8+0xa0/0xd0 [ 337.427603] vchan_complete+0x124/0x3b0 [ 337.427609] tasklet_action_common.constprop.0+0x190/0x1d0 [ 337.427617] tasklet_action+0x30/0x40 [ 337.427623] __do_softirq+0x1a0/0x5c4 [ 337.427628] irq_exit+0x110/0x140 [ 337.427633] handle_domain_irq+0xa4/0xe0 [ 337.427640] gic_handle_irq+0x64/0x160 [ 337.427644] call_on_irq_stack+0x20/0x4c [ 337.427649] do_interrupt_handler+0x7c/0x90 [ 337.427654] el1_interrupt+0x30/0x80 [ 337.427659] el1h_64_irq_handler+0x18/0x30 [ 337.427663] el1h_64_irq+0x7c/0x80 [ 337.427667] cpuidle_enter_state+0xe4/0x540 [ 337.427674] cpuidle_enter+0x54/0x80 [ 337.427679] do_idle+0x2e0/0x380 [ 337.427685] cpu_startup_entry+0x2c/0x70 [ 337.427690] rest_init+0x114/0x130 [ 337.427695] arch_call_rest_init+0x18/0x24 [ 337.427702] start_kernel+0x380/0x3b4 [ 337.427706] __primary_switched+0xc0/0xc8 | |||||
| CVE-2025-71075 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: aic94xx: fix use-after-free in device removal path The asd_pci_remove() function fails to synchronize with pending tasklets before freeing the asd_ha structure, leading to a potential use-after-free vulnerability. When a device removal is triggered (via hot-unplug or module unload), race condition can occur. The fix adds tasklet_kill() before freeing the asd_ha structure, ensuring all scheduled tasklets complete before cleanup proceeds. | |||||