Export limit exceeded: 409974 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409974 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98835 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kionix-kx022a: Fix array boundary check The driver performs a sanity check for an array size, when converting a register value to an array index. The check incorrectly accepts the sizeof(array) as a last index, when last valid index should be sizeof(array) - 1. Fix the check by bailing out when index >= sizeof(array). | ||||
| CVE-2026-98838 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vt: skip screen update for DEC alignment test on backgroup consoles [BUG] Recently, we encountered a KASAN warning as follows: BUG: KASAN: slab-out-of-bounds in fb_pad_aligned_buffer+0x11f/0x140 Read of size 1 at addr ff1100015fd9f6a4 by task tty_fbcon_oob/1239 CPU: 7 UID: 0 PID: 1239 Comm: tty_fbcon_oob Not tainted 7.3.0-rc1 #100 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 Call Trace: <TASK> ... kasan_report+0xf0/0x120 fb_pad_aligned_buffer+0x11f/0x140 ccw_putcs+0x86c/0xa80 fbcon_putcs+0x338/0x410 do_update_region+0x21d/0x450 do_con_write+0x1e0e/0x4880 con_write+0x13/0x80 n_tty_write+0x374/0x1010 file_tty_write.isra.0+0x404/0x7a0 ... reproduce: 1) open /dev/tty0, set a KDFONTOP ioctl with op.op = KD_FONT_OP_SET, op.width = 8 and op.height = 16 (visible VC1) 2) open /dev/tty1, set a KDFONTOP ioctl with op.op = KD_FONT_OP_SET, op.width = 28 and op.height = 24 (invisible VC2) 3) echo 3 > /sys/devices/virtual/graphics/fbcon/rotate_all 4) write EShash8(esc hash8) to tty1 [CAUSE] All VCs render to the framebuffer. setfont only modifies the target VC's font without resizing the framebuffer backing buffer (par->rotated.buf); the buffer is only resized for the visible VC (fbcon_do_set_font -> ... -> vc_do_resize -> update_screen). This relies on the con_should_update() check performed before every update_region(). However, the ESC # 8 path (do_con_trol -> do_update_region) omits the con_should_update() check. After changing the font size of an invisible VC, do_update_region() fills using the new font size against a buffer that was never resized, causing an out-of-bounds access. [FIX] Only push the update when the console is visible and not blanked, add the con_should_update() check in the do_con_trol() like every other call site of do_update_region() (update_region(), invert_screen(), ...). | ||||
| CVE-2026-98840 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF The reload of 'vc' added by commit 8fb9ea65c9d1 ("vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF") sits after the 'if (ret)' block, so the copy-failure break path exits the loop without reloading vc. If the vc was kfree()'d via vc_port_destruct during the unlocked copy_from_user() window, the post-loop 'if (written && vc) vcs_scr_updated(vc)' is reached with a stale non-NULL vc. The '&& vc' guard from commit a287620312dc ("vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write") only handles the NULL case, not this stale-non-NULL case; vcs_notifier() then reads param->vc->vc_num from freed memory: BUG: KASAN: slab-use-after-free in vcs_notifier+0x7c/0xd0 Read of size 2 at addr ffff888007149190 Call Trace: vcs_notifier+0x7c/0xd0 atomic_notifier_call_chain+0x70/0xa0 vcs_scr_updated+0x77/0xa0 vcs_write+0x71b/0x7e0 Allocated by task: vc_allocate -> con_install -> tty_open Freed by task: kfree <- vt_ioctl (VT_DISALLOCATE -> vc_port_destruct) Move the reload to immediately after console_lock(), before 'if (ret)', so every break path below passes a fresh vc to the post-loop vcs_scr_updated(). | ||||
| CVE-2026-98841 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virt: vmgenid: set driver_data before registering notification handlers Both probe paths register their notification handler before assigning driver_data, which the handler dereferences. In the devicetree path, the notification IRQ can fire as soon as devm_request_irq() registers the handler: the interrupt may already be pending at probe time, for example when a VMM injects the generation-changed notification while restoring a guest from a snapshot that was taken before the driver had probed (Firecracker does exactly this on snapshot restore). The IRQ is also requested with IRQF_SHARED, so another device sharing the line can trigger the handler just as early. The handler then calls vmgenid_notify(), which dereferences the still-NULL driver_data and panics: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.38+ #1 PREEMPT(none) Hardware name: linux,dummy-virt (DT) pc : vmgenid_notify.isra.0+0x24/0x8c lr : vmgenid_of_irq_handler+0x14/0x34 Call trace: vmgenid_notify.isra.0+0x24/0x8c (P) vmgenid_of_irq_handler+0x14/0x34 __handle_irq_event_percpu+0x44/0x1bc handle_irq_event+0x4c/0xb4 handle_fasteoi_irq+0xf8/0x1f8 The ACPI path has the same ordering problem: the handler is installed with acpi_install_notify_handler() before driver_data is assigned. ACPI notifications are dispatched asynchronously from a workqueue, so the window is narrow, but a notification arriving between the two calls hits the same NULL dereference. Assign driver_data before registering the handlers. The state is fully initialized at that point, so the handlers are safe to run. Should registration fail, the probe error path leaves no dangling pointer behind: the driver core clears driver_data in device_unbind_cleanup(). | ||||
| CVE-2026-98844 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfs: clear post-EOF pagecache when extending a file via write Fix netfs to erase the contents of a hole created after the EOF by an ordinary write if dirty data has been previously left there by writes through an mmapped region. Neither the buffered nor the unbuffered/DIO write path clears that stale pagecache. Zero the tail of the folio straddling the EOF before an extending write. That is the only folio that can hold data written past the EOF through an mmap, as pages wholly beyond the EOF can't be faulted in. The folio is zeroed rather than dropped so a concurrent extending write can't lose data. Both write paths downgrade the i_rwsem to shared, so extending writes can run concurrently and the i_size read by the caller may be stale by the time the folio is locked. Re-read i_size under the folio lock and clamp the zeroed range up to it, so a racing write that already put data into the folio isn't clobbered. Wait for any writeback on the folio to finish before zeroing it so that the pagecache isn't modified while it may still be read by the transport during transmission. Honour IOCB_NOWAIT by returning -EAGAIN rather than blocking on the folio lock, on writeback, or in folio_mkclean()'s rmap walk when the folio is mapped. truncate_pagecache() can't be used here: it must be called with the i_rwsem held exclusively, but these write paths only hold it shared, and it would block unconditionally, breaking IOCB_NOWAIT. Callers that hold i_rwsem exclusively for the whole resize (truncate, setattr, fallocate, clone) exclude any genuine concurrent buffered writer, so staleness can instead be decided from the folio's dirty state, as pagecache_isize_extended() already does for filesystems that serialise writes against truncate/setattr via a single i_rwsem. Export netfs_clear_stale_post_isize() helper to handle such case. The helper is required by the CIFS client to fix generic/363. | ||||
| CVE-2026-98846 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: check RCV_SHUTDOWN after the sendmsg connect wait sctp_wait_for_connect() drops the socket lock while it sleeps. An out-of-the-blue ABORT can then be processed from the socket backlog and unlink the association. If a concurrent shutdown(fd, SHUT_RD) sets RCV_SHUTDOWN, the waiter breaks with err == 0 before checking asoc->base.dead. Its final sctp_association_put() can then free the association, leaving sctp_sendmsg_to_asoc() to continue with a dangling pointer. Check RCV_SHUTDOWN along with the wait error in sctp_sendmsg_to_asoc() before using the association again. The check only accesses the socket, so it needs no additional association reference. Return the existing -ESRCH so that sctp_sendmsg() skips freeing a new association that may already have been destroyed. Keep sctp_wait_for_connect() unchanged to preserve its behavior for the connect() caller. | ||||
| CVE-2026-98849 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pfcp: fix socket lifetime on netdevice registration failure pfcp_newlink() creates the UDP socket before register_netdevice(). If registration fails after pfcp_dev_init() succeeds, the core calls pfcp_dev_uninit(), which releases the socket and clears pfcp->sk. The newlink error path then releases it again, causing a NULL pointer dereference. This was observed with failslab fault injection: FAULT_INJECTION: forcing a failure. kobject: kobject_add_internal failed for pfcp0 (error: -12 parent: net) BUG: KASAN: null-ptr-deref in udp_tunnel_sock_release+0x1c/0x50 Read of size 8 at addr 0000000000000120 by task ip/1037 Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x78/0x90 print_report+0x468/0x5cc kasan_report+0xa4/0xf0 __asan_load8+0x7c/0xd0 udp_tunnel_sock_release+0x1c/0x50 pfcp_newlink+0x128/0x184 rtnl_newlink+0x848/0xe44 rtnetlink_rcv_msg+0x468/0x514 netlink_rcv_skb+0xc0/0x1f0 rtnetlink_rcv+0x18/0x24 netlink_unicast+0x4b8/0x558 netlink_sendmsg+0x2b8/0x584 ... Return from pfcp_del_sock() if pfcp->sk is NULL. | ||||
| CVE-2026-98850 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/packet: prevent TX_RING byte count overflow tpacket_snd() drains every SEND_REQUEST frame in a TX ring and adds each valid packet length to the signed int len_sum. Userspace can recycle completed frames concurrently, so a single blocking send call is not bounded by the ring size. After enough successful transmissions len_sum wraps into the negative range. In particular, 65536 65535-byte frames followed by a 65007-byte frame produce 0xfffffdef, or -EIOCBQUEUED. sock_sendmsg_nosec() treats that as an impossible return and triggers a BUG. On systems configured to panic on oops, a CAP_NET_RAW holder can panic the host kernel. Stop before the next frame would make the byte count exceed INT_MAX. The positive short count leaves that frame pending for a later send call. A two-thread TPACKET_V2 reproducer triggered the BUG on an arm64 build of Linux 7.3-rc4. With this change, the same reproducer returned the expected positive short count without an oops. | ||||
| CVE-2026-98852 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: extend IPv6 exthdr detection of tunneled packets Commit c4336a07eb6b ("net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback") split skb_gso_has_extension_hdr() into mutually exclusive branches on skb->encapsulation. This did not yet address all paths: 1. With skb->encapsulation set, the outer header is not checked. IPv6 tunnels such as ip6_gre and ip6_tunnel add an outer Destination Options header by default (encap_limit). Their GSO packets skip software GSO, then skb_csum_hwoffload_help() sees the outer extension header and calls skb_checksum_help() on the GSO skb, which warns and drops it. 2. Tunnels over IPv6 without an outer transport header, such as ip6_tunnel, leave skb->transport_header at the inner transport header. skb_network_header_len() then spans the outer IPv6, tunnel and inner IP headers, a false positive. 3. UDP tunnels without an inner network header, such as SCTP-in-UDP or PSP, have no inner IPv6 header to check. Decide on the outer header alone. 4. Directly dereferencing inner_ip_hdr(skb)->version without skb_header_pointer() is unsafe. Instead, check ipv6_ext_hdr(nexthdr) on the outer IPv6 header and, if set, on the inner IPv6 header. Read the headers with skb_header_pointer(). Keep the skb_network_header_len() check when !skb->encapsulation to also catch encapsulated packets without skb->encapsulation (e.g., virtio). Use the same helper in skb_csum_hwoffload_help(). Its open coded test has the false positive of (2) and ignores the inner header. Background: checksum offload of tunneled packets invariants: Non-GSO skb: - If the inner packet is CHECKSUM_PARTIAL, Local Checksum Offload computes the outer checksum in software and the device offloads only the inner L4 checksum. - If the inner packet is CHECKSUM_NONE (e.g., SCTP-in-UDP, ESP-in-UDP, Remote Checksum Offload), the device offloads the outer UDP or GRE checksum instead. GSO skb: - A device with NETIF_F_GSO_UDP_TUNNEL_CSUM or NETIF_F_GSO_GRE_CSUM computes both inner and outer checksums per segment. The outer checksum is seeded with only the pseudo-header checksum. A NETIF_F_IPV6_CSUM device must parse through the outer headers to reach the inner ones. | ||||
| CVE-2026-98853 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: gso: limit recursive IP-in-IP segmentation IP-in-IP GSO can re-enter inet_gso_segment() or ipv6_gso_segment() for each nested IP header. encap_level tracks header bytes, not callback depth, so a deep chain can exhaust the kernel stack. Making inet_gso_segment() stackable introduced unbounded IPv4 nesting; IPIP GSO/TSO later made the path reachable. The IPv6 stackable path was introduced separately and uses the same guard. Count IPv4 and IPv6 GSO handler entries in skb_gso_cb, initialized once per top-level GSO operation and preserved across GRE/UDP context changes. Use the existing IP_TUNNEL_RECURSION_LIMIT for both handlers. The first five entries pass, and the sixth returns -EINVAL before dispatching another GSO callback. | ||||
| CVE-2026-98854 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: of/overlay: only treat a positive changeset id as registered of_overlay_fdt_apply() stores the idr_alloc() return value in ovcs->id before checking it. On failure the stored id is negative, free_overlay_changeset()'s "if (ovcs->id)" check passes, idr_remove() is called with a negative id and list_del() runs on ovcs->ovcs_list, which is not initialized until after the id allocation. An allocation failure at that point dereferences NULL. Make free_overlay_changeset() treat only a strict-positive id as registered. The rest of the function already copes with a partially-initialized ovcs, so the error path stays a plain goto err_free_ovcs. | ||||
| CVE-2026-98856 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: kprobes: Skip disarmed probes when checking optkprobe overlap On x86, an optkprobe at A replaces five bytes with a jump. If a disabled probe B is at A+2, get_optimized_kprobe() stops at B when arming a new probe C at A+4. It leaves A optimized: A A+1 A+2 A+3 A+4 A's jump | e9 | d0 | d1 | d2 | d3 | after C | e9 | d0 | d1 | d2 | cc | The INT3 for C overwrites the last byte of A's jump displacement, so execution can jump to the wrong address. B can have prepared optinsns while disarmed, but has no jump to unoptimize. Continue past disarmed and unprepared probes to find the active optimized probe before arming a probe in its jump. | ||||
| CVE-2026-98859 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: stop the release timer from being rearmed on remove mt_remove() quiesces the sticky-finger timer before stopping the hardware: timer_delete_sync(&td->release_timer); sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group); hid_hw_stop(hdev); timer_delete_sync() waits for a running callback and dequeues the timer, but it does not stop the timer from being armed again. The transport is still delivering reports at that point, and the report path rearms it: if (app->quirks & MT_QUIRK_STICKY_FINGERS) { if (td->mt_io_flags & MT_IO_SLOTS_MASK) mod_timer(&td->release_timer, jiffies + msecs_to_jiffies(100)); A report that arrives after timer_delete_sync() has returned therefore leaves the timer queued. td is allocated with devm_kzalloc() against hdev->dev, so it is freed when the driver is unbound, after mt_remove() returns. When the timer fires afterwards, mt_expired_timeout() dereferences the freed td: struct mt_device *td = timer_container_of(td, t, release_timer); struct hid_device *hdev = td->hdev; if (test_and_set_bit_lock(MT_IO_FLAGS_RUNNING, &td->mt_io_flags)) Simply moving the teardown after hid_hw_stop() does not fix this on its own, because mt_expired_timeout() calls mt_release_contacts(), which walks hdev->inputs; the timer still has to be quiesced before hid_hw_stop() tears the input devices down. Use timer_shutdown_sync() instead, which additionally makes any later mod_timer() a no-op, so neither ordering constraint has to be traded off against the other. This is the final-teardown pattern the function was introduced for, and hid-wiimote already uses it for the same reason. | ||||
| CVE-2026-111893 | 2 Phpmyfaq, Thorsten | 2 Phpmyfaq, Phpmyfaq | 2026-10-18 | 6.5 Medium |
| phpMyFAQ 4.2.0-alpha before 4.2.0-beta contains a privilege escalation vulnerability in GroupController::saveCategoryRestrictions() that lets delegated administrators assign categories outside their own scope. Category-restricted administrators can POST to /admin/api/group/category-restrictions with out-of-scope or empty categoryIds to grant groups unrestricted category access. | ||||
| CVE-2026-111894 | 2 Phpmyfaq, Thorsten | 2 Phpmyfaq, Phpmyfaq | 2026-10-18 | 5.4 Medium |
| phpMyFAQ 3.2.1 before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains a stored cross-site scripting vulnerability that allows authenticated content authors to inject JavaScript by embedding iframes with data:text/html sources in FAQ or News content. Attackers can bypass the hostless media-host allowlist in FaqHelper::cleanUpContent(), which is rendered via Twig's raw filter, to run phishing interfaces or top-frame redirects for viewers. | ||||
| CVE-2026-111895 | 2 Phpmyfaq, Thorsten | 2 Phpmyfaq, Phpmyfaq | 2026-10-18 | 6.8 Medium |
| phpMyFAQ 3.2.0 before 4.0.0 and 4.0.2 before 4.2.0-beta contains an authentication bypass in its Microsoft Entra ID login flow, which links users by the mutable preferred_username claim and whose AuthEntraId::create() ignores the duplicate-login exception while continuing with the existing local account. Attackers controlling an Entra identity in the configured tenant with a matching preferred_username can take over that local account, including super-admin accounts. | ||||
| CVE-2026-111896 | 2 Phpmyfaq, Thorsten | 2 Phpmyfaq, Phpmyfaq | 2026-10-18 | 5.4 Medium |
| phpMyFAQ from 4.2.0-alpha before 4.2.0-beta contains a stored cross-site scripting vulnerability in SvgSanitizer that allows FAQ editors to store executable SVG files. Attackers can split script tags around removed tokens like processing instructions so single-pass removal reassembles them, executing script in the application origin when victims open the file. | ||||
| CVE-2026-98861 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fprobe: Use guard(rcu_sched_notrace) and check rcu_is_watching() unregister_fprobe() and unregister_fprobe_async() (used by BPF kprobe-multi) rely on standard RCU grace periods (synchronize_rcu() and call_rcu()) to wait until in-flight fprobe handlers complete before freeing the fprobe. However, if an fprobe handler executes while RCU is not watching (such as in the idle loop or nohz_full extended quiescent states), standard RCU does not track preemption-disabled sections. Consequently, synchronize_rcu() does not wait for those executions, which can lead to a use-after-free if the fprobe is freed immediately after unregistration. Ensure handlers exit early when !rcu_is_watching(). Furthermore, fprobe_fgraph_entry() and fprobe_ftrace_entry() previously used guard(rcu)() and rcu_read_lock(), which invoke lockdep on every hit under CONFIG_PROVE_LOCKING. This adds overhead and can cause lockdep recursion if probed functions interact with lockdep. Since rhltable_lookup() and rhl_for_each_entry_rcu() use rcu_dereference_all_check() (which checks rcu_read_lock_any_held()), holding preemption disabled via rcu_read_lock_sched_notrace() is fully valid and sufficient so long as rcu_is_watching() is true. Define and use guard(rcu_sched_notrace)() across fprobe_ftrace_entry(), fprobe_fgraph_entry(), and fprobe_return(). This eliminates fast-path rcu_read_lock() and lockdep overhead while guaranteeing safe grace period synchronization. | ||||
| CVE-2026-98864 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Wait for SCX_OPSS_DISPATCHING before reenqueueing a task ebf1ccff79c4 ("sched_ext: Fix ops.dequeue() semantics") moved the final ops_state store in scx_dispatch_enqueue() after the DSQ unlock so that the custody update and ops.dequeue() precede it. A task can thus be found on a DSQ while still SCX_OPSS_DISPATCHING. The dequeue and core-sched pick paths wait for the state to clear in ops_dequeue() but the reenqueue paths don't. A reenqueue in that window runs ops.enqueue() and sets SCX_OPSS_QUEUED before the dispatch has completed. The dispatcher's final store then overwrites it with SCX_OPSS_NONE and finish_dispatch() drops every later dispatch of the task. Wait for SCX_OPSS_DISPATCHING to clear before dequeueing a task for reenqueue, the same way ops_dequeue() does. | ||||
| CVE-2026-98866 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched/cache: Introduce task_struct->sched_cache_grp to fix UAF Add a sched_cache_grp pointer to task_struct so that scheduler code can access the cache group directly via the task, without going through mm->sched_cache_grp. This decouples the scheduler's hot-path accesses from the mm_struct. Each task holds its own refcount on the sched_cache_group, separate from the reference held by its mm_struct. The reference is acquired in copy_mm() (fork) and exec_mmap() (exec), and released in exit_mm(). This fixes the use-after-free when account_mm_sched() reaches the group through a task whose mm is being switched, as reported by Hyunwoo: https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/ Convert all scheduler code in fair.c and exit.c to use p->sched_cache_grp instead of p->mm->sched_cache_grp. Keep the fork/exec/exit reference management out of the generic mm paths: add sched_cache_fork(), sched_cache_fork_cleanup(), sched_cache_exec_mmap() and sched_cache_exit_mm() in kernel/sched/cache_sched.c (with empty stubs for !CONFIG_SCHED_CACHE), so fs/exec.c, kernel/fork.c and kernel/exit.c each call one helper instead of open-coding the refcounting under #ifdef. Also add sched_cache_group_get() and task_cache_group_get(). | ||||