Export limit exceeded: 106786 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (106786 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90399 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 | ||||
| CVE-2026-90398 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Compile tested only. | ||||
| CVE-2026-90383 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: sgi-gru: remove interrupt-context page-table walks The GRU TLB miss handler walks a process's page tables without holding page-table locks or a reference to the mapped page. It also uses a kernel page-table accessor on user page tables and supports only PMD-level large mappings on x86-64. Remove the direct walker. Send interrupt faults directly to user polling mode so the existing call-OS fallback retries them in process context. Remove the mmap-lock failure statistic that can no longer be incremented. | ||||
| CVE-2026-90367 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: hold dev->mt76.mutex while disabling tx worker in SER mt7996_mac_reset_work() parked the tx worker and disabled the RX/TX NAPIs before taking dev->mt76.mutex. mt76_worker_disable()/_enable() are plain kthread park/unpark, not refcounted, and __mt76_set_channel() toggles the same worker and the MT76_RESET bit under the mutex. An L1 SER racing a channel switch could therefore have the worker unparked and MT76_RESET cleared while the reset path resets the DMA rings, corrupting descriptors or tokens. Take the mutex before disabling the worker, as mt7915 does. | ||||
| CVE-2026-90358 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, x86: Fix trampoline stack size for 128-bit arguments btf_distill_func_proto() accepts a function argument up to 16 bytes, so a 128-bit scalar such as __int128 reaches the x86 trampoline with arg_size == 16. But the current implementation assumes an __int128 argument only needs one register, so the register save area is under-allocated and save_args() overwrites adjacent stack slots. Compute the register count from arg_size for all arguments to fix it. | ||||
| CVE-2026-90347 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: Keep 'orig_x0' in-sync with x0 on syscall entry Commit e057b9477232 ("arm64: syscall: Ensure saved x0 is kept in-sync with tracer updates") attempted to resolve a long-standing issue with syscall entry tracing, where a tracer is able to manipulate the first syscall argument without being subjected to seccomp or audit checking. Unfortunately, that fix was incomplete [1], as it failed to update 'orig_x0' between a tracer updating x0 during a seccomp ptrace exit (SECCOMP_RET_TRACE) and the seccomp filter being re-evaluated. Rather than add hooks to the core seccomp code, instead move the synchronisation code into the ptrace GPR and syscall setting code so that 'orig_x0' is kept up to date with x0 whenever we're stopped on the syscall entry path. | ||||
| CVE-2026-90343 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: stop PMSR before P2P and NAN teardown PMSR request teardown must abort active measurements while the wireless_dev is still present in the driver. cfg80211_leave_locked() and cfg80211_stop_pd() already do this before invoking the driver's stop callback, but cfg80211_stop_p2p_device() and cfg80211_stop_nan() do not. Those helpers are also called directly by nl80211, rfkill shutdown, and wireless_dev unregister paths. If one of these paths stops a P2P device or NAN interface with a pending request, it removes the mac80211 subinterface from the driver first. Subsequent request cleanup cannot reach the lower driver's abort callback, but cfg80211 frees the request regardless. Driver state can then retain a stale request and use it when it later reports a result. Call cfg80211_pmsr_wdev_down() before stopping the P2P device or NAN interface. This keeps lower-driver request state and cfg80211 request ownership in sync for all of the helpers' callers. | ||||
| CVE-2026-90326 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix race between policy activation and blkg destruction When switching an IO scheduler on a block device, blkcg_activate_policy() allocates blkg_policy_data (pd) for all blkgs attached to the queue. However, blkcg_activate_policy() may race with concurrent blkcg deletion, leading to use-after-free and memory leak issues. The use-after-free occurs in the following race: T1 (blkcg_activate_policy): - Successfully allocates pd for blkg1 (loop0->queue, blkcgA) - Fails to allocate pd for blkg2 (loop0->queue, blkcgB) - Enters the enomem rollback path to release blkg1 resources T2 (blkcg deletion): - blkcgA is deleted concurrently - blkg1 is freed via blkg_free_workfn() - blkg1->pd is freed T1 (continued): - Rollback path accesses blkg1->pd->online after pd is freed - Triggers use-after-free In addition, blkg_free_workfn() frees pd before removing the blkg from q->blkg_list. This allows blkcg_activate_policy() to allocate a new pd for a blkg that is being destroyed, leaving the newly allocated pd unreachable when the blkg is finally freed. Fix these races by extending blkcg_mutex coverage to serialize blkcg_activate_policy() rollback and blkg destruction, ensuring pd lifecycle is synchronized with blkg list visibility. | ||||
| CVE-2026-90324 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: check import_ubuf() return value import_ubuf() can fail if the address range (provided by the userspace ublk server) is outside the allowed user address space. Return that 0 bytes were copied if import_ubuf() fails rather than passing an uninitialized struct iov_iter to ublk_copy_user_pages(). | ||||
| CVE-2026-90321 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline xattrs during inode block validation Patch series "ocfs2: validate xattr entry bounds", v7. This series validates OCFS2 xattr entry name/value bounds when xattr metadata is read and validated, before getxattr() or listxattr() can walk out-of-range entry arrays or offsets from corrupted metadata. This patch (of 2): ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk metadata from it, but inline xattr metadata is still checked only in operation-specific consumers. The existing ibody lookup helper validates inline header placement and entry count, but inode block validation does not reject entry name/value bounds. Add a flat xattr entry validator and call it from inode block validation for inline xattrs. Keep the operation paths on their existing header/count lookup checks; the full entry bounds check now runs when the inode block is validated at read time. Reject corrupted inline xattr metadata before ocfs2_xattr_ibody_get() or listxattr() can walk past the inline storage. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_find_entry+0x5a/0x170 Read of size 2 at addr ffff8881242a2000 by task python3/529 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_find_entry+0x5a/0x170 ocfs2_xattr_get_nolock+0x20a/0x820 ocfs2_xattr_get+0x10c/0x1e0 __vfs_getxattr+0xe2/0x130 vfs_getxattr+0x185/0x1b0 | ||||
| CVE-2026-90320 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate external xattr entries when reading metadata ocfs2_validate_xattr_block() checks the xattr block header before the block reaches higher-level xattr users, but it does not verify that a non-indexed block's xh_count and entry offsets fit inside the block. Indexed buckets likewise reach list/get consumers after ECC without an entry-bounds check. Use the flat xattr entry validator for non-indexed external xattr blocks, and use a bucket-specific validator for indexed buckets at metadata read time. The bucket validator keeps the entry array bounded by the first bucket block while checking name/value offsets against the bucket block they target. Reject corrupted external xattr metadata before listxattr() or getxattr() can walk out-of-range entry arrays or name/value offsets. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_list_entries+0xd7/0x190 Read of size 1 at addr ffff88810a654007 by task ocfs2_xattr_lis/630 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_list_entries+0xd7/0x190 ocfs2_listxattr+0x3f6/0x610 listxattr+0x90/0xe0 path_listxattrat+0xed/0x220 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-90308 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Hold QP references for AE and CM processing AE QP fatal events and iWARP CM paths load QPs from dev->qp_xa and then use or reference them outside the xarray lock. erdma_destroy_qp() can drop the destroy-path reference and free QP resources while such a lookup is in flight. Add erdma_qp_get_by_qpn() to acquire a kref under the xarray lock with kref_get_unless_zero(). Remove the QP from the xarray before dropping the destroy-path reference so no new lookup can acquire it while destruction waits for existing users. | ||||
| CVE-2026-90301 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: o2hb: quiesce negotiate handlers and timeout work Heartbeat regions publish struct o2hb_region as the private data for the NEGO_TIMEOUT and NEGO_APPROVE o2net handlers as soon as make_item() creates the configfs region. The approve handler can call o2hb_arm_timeout(), so a peer can touch the region timeout work before dev_store() has finished building the heartbeat runtime, or after teardown has started to shut that runtime back down. The final configfs put also has to keep reg alive until the last in-flight o2net callback drops its handler reference. o2net_unregister_handler_list() blocks future handler lookups, but it does not wait for sc_rx_work that already passed o2net_handler_get(). That drain needs to cover local listener teardown as well, where the o2net ordered workqueue may already be inside destroy_workqueue(). Fix the lifetime rule in both directions. Initialize the region delayed works before publishing reg through the o2net handler table, keep new or stopping regions non-armable with hr_stopping, and quiesce both delayed works on failed-start and teardown paths even when no heartbeat thread is left to call o2hb_disarm_timeout(). Then unregister handlers before tearing down handler-visible region state and make the drain wait for the active or destroying o2net ordered workqueue before release frees reg. The buggy scenario involves two paths, with each column showing the order within that path: region lifecycle: late negotiate callback: 1. make_item() registers the 1. o2net_process_message() gets a region handlers before heartbeat handler for reg. dev_store() has built a 2. The callback runs after the lookup runnable heartbeat context. lock is dropped and dereferences reg. 2. A failed start or rmdir 3. An approve or timeout path tries to stops the heartbeat thread, queue reg's delayed work, or release quiesces existing work, and races the callback body after handler drops the final configfs ref. unregister. 3. region_release() must drain 4. The callback or delayed work can handler-visible o2net rx work outlive reg unless lifecycle code before freeing reg. keeps the region non-armable and drains the active-or-destroying o2net workqueue. Validation reproduced this kernel report: KASAN slab-use-after-free in __run_timers+0x22c/0x5b0 Write of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 __run_timers+0x22c/0x5b0 kasan_report+0xe0/0x110 _raw_spin_unlock_irqrestore+0x27/0x60 try_to_wake_up+0x191/0xf70 timer_expire_remote+0xae/0xf0 run_timer_softirq+0x19b/0x1a0 handle_softirqs+0x156/0x660 __irq_exit_rcu+0xc4/0x160 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x6c/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 o2hb_heartbeat_group_make_item+0x3c/0x600 | ||||
| CVE-2026-90291 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: module/dups: Fix use-after-free in kmod_dup_req lifetime handling The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed only after it is no longer referenced. When releasing an instance, the kmod_dup_request_delete() function removes the kmod_dup_req from the dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it. However, this doesn't work correctly because parallel users referencing the instance in kmod_dup_request_exists_wait() don't enter an RCU read-side critical section. This can result in a use-after-free. The kmod_dup_request_exists_wait() function may need to hold a valid reference to a kmod_dup_req instance across a blocking wait until the corresponding modprobe command completes. This makes it unsuitable for RCU. Fix the issue by changing the lifecycle management of kmod_dup_req to use reference counting. | ||||
| CVE-2026-90289 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Resize MST HDCP per-connector arrays to 32 AMDGPU_DM_MAX_DISPLAY_INDEX is 31. It suggest a maximum number of 32 connectors. But the way it's used is like MAX_DISPLAY_COUNT. Hence we're off by one with DRM core, which supports a max of 32 connectors. Rename AMDGPU_DM_MAX_DISPLAY_INDEX to AMDGPU_DM_MAX_DISPLAY_COUNT to match its actual use, and increase the size to 32 to match the originally intended size. | ||||
| CVE-2026-90260 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: don't clobber the extent buffer when zeroing it out On a zoned filesystem a freed-but-still-dirty tree block is written out as zeros (EXTENT_BUFFER_ZONED_ZEROOUT) only to keep the zone write pointer advancing. btree_csum_one_bio() implemented this by memzeroing the extent buffer's own folios before submission. That destroys the in-memory buffer while it may still be referenced. In particular btrfs_free_tree_block() can run on it afterwards and reads the header to add a delayed reference; once the header has been zeroed it frees bytenr 0 and corrupts the extent tree (the btrfs_header_bytenr(buf) != 0 ASSERT in btrfs_free_tree_block(), or an "unable to find ref" abort). It is flaky and reproduces under fsstress, e.g. generic/461 and generic/013. Write the zeros to disk from the shared zero page instead and leave the extent buffer content untouched, so any later reference - including the delayed reference from btrfs_free_tree_block() - still sees a valid header. end_bbio_meta_write() now clears writeback on the buffer's own folios, as the bio no longer carries them. | ||||
| CVE-2026-90256 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use proto_lock for l2cap_data to fix l2cap_disconn_ind hci_conn::l2cap_data is accessed without locks in l2cap_disconn_ind via hci_conn_timeout (disc_work) -> hci_proto_disconn_ind -> l2cap_disconn_ind. This is UAF if the l2cap_conn is deleted concurrently. disc_work is disabled sync in hci_conn_del(), so we cannot take hci_dev_lock in disc_work. Fix by using proto_lock to guard l2cap_data, in addition to hdev->lock which is held in other access paths. | ||||
| CVE-2026-90240 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush context cache with correct SID when tearing down aliases domain_context_clear_one() and device_pasid_table_teardown() are both invoked once per DMA alias of a device. Each function locates the context entry using the bus/devfn pair provided by the pci_for_each_dma_alias() callback, then calls intel_context_flush_no_pasid(), which constructs a device-selective context-cache invalidation from info->bus and info->devfn (that is, always the requester ID of the device itself). As a result, for every alias other than the device’s own RID, the context entry that was just cleared in memory is never invalidated in the context cache. Hardware may continue using that stale cached entry. In the scalable-mode teardown path, intel_pasid_free_table() can then free the PASID directory still referenced by that stale entry, allowing the IOMMU to walk freed memory. Fix this by passing the source ID of the entry being torn down to intel_context_flush_no_pasid(), instead of deriving it from @info. | ||||
| CVE-2026-90234 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Return a delegation the client fails to record When an NFS server grants a delegation in an OPEN reply, nfs_inode_set_delegation() records it on the client. However, three of its error flows return without sending DELEGRETURN. A delegation can be relinquished only by DELEGRETURN (RFC 8881 Section 20.2.4), so dropping one silently leaves the server believing the client still holds it. If the server happens to recall that delegation, the client answers CB_RECALL with NFS4ERR_BADHANDLE because it has no record of the stateid. The server revokes the delegation and moves it onto its cl_revoked list, because the client never sends the FREE_STATEID that would drain it. Every subsequent SEQUENCE reply then carries SEQ4_STATUS_RECALLABLE_STATE_REVOKED, and the client's state manager loops issuing TEST_STATEID across its delegations without ever clearing the condition. The window is easy to reach now that a server offers a write delegation on any write OPEN: a delegation recalled for one opener races a re-open that the server answers with a fresh write delegation. Instead of dropping it, hand the delegation back during these error flows. | ||||
| CVE-2026-90231 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix unconfined user namespace restriction forced stack If a task is already confined by a stack the unprivileged transition restriction on unconfined is not correctly, applied. This results in an escape if two transitions through an unconfined profile can be executed. Fix this by pushing the check into the per profile label build. The check will always be done against unconfined and result in a stack of just the unconfined component when necessary. | ||||