Export limit exceeded: 409974 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409974 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409974 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98839 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection() In paste_selection(), the loop copies min_t(unsigned int, vc_sel.buf_len - pasted,tty->receive_room) bytes per iteration into tty_ldisc_receive_buf() and increments pasted += count. Because the selection mutex (vc_sel.lock) is dropped inside the loop Whenever the line discipline buffer fills up and paste_selection() sleeps on tty->write_wait, a concurrent TIOCLINUX (TIOCL_SETSEL) ioctl can replace vc_sel.buffer with a shorter selection and reduce vc_sel.buf_len below pasted. When paste_selection() resumes, vc_sel.buf_len - pasted underflows as an unsigned integer to a large positive value, causing tty_ldisc_receive_buf(ld, vc_sel.buffer + pasted, NULL, count) to read up to 4094 bytes out-of-bounds past the newly allocated vc_sel.buffer. Fix this by terminating the loop when pasted >= vc_sel.buf_len. Kernel stack trace (Linux 7.3.0-rc3): ================================================================== BUG: KASAN: slab-out-of-bounds in n_tty_receive_buf_common+0xa01/0x1650 Read of size 4094 at addr ffff888101c58010 by task kworker/u17:1/65 Workqueue: events_unbound flush_to_ldisc Call Trace: <TASK> dump_stack_lvl+0x70/0xa0 print_report+0x153/0x4c6 kasan_report+0xf1/0x120 kasan_check_range+0x11c/0x200 __asan_memcpy+0x29/0x70 n_tty_receive_buf_common+0xa01/0x1650 tty_ldisc_receive_buf+0x66/0x110 tty_port_default_receive_buf+0x6b/0xb0 flush_to_ldisc+0x1b4/0x410 process_one_work+0x6ff/0x1110 worker_thread+0x4a8/0xb70 kthread+0x307/0x3e0 ret_from_fork+0x3ed/0x680 </TASK> ================================================================== | ||||
| CVE-2026-98845 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tpm: Disable TPM on null key name mismatch The null key name check exists to protect against TPM reset attacks, so a mismatch should stop the device from serving further requests. Currently it does not disable the chip when it finds a mismatch. The mismatch is logged: tpm tpm0: null key integrity check failed but the chip keeps serving commands: / # tpm2_getcap -c properties-fixed TPM_PT_FAMILY_INDICATOR: as UINT32: 0x08322e3000 as string: "2.0" ... tpm2_load_null() where the null key name check is run sets the chip as disabled only if the rc is non zero. When the mismatch is seen, rc is zero at that point and it returns success. The other issue is that the caller expects the null key handle to be populated when the function returns 0 which it does here without writing the handle and proceeds assuming the null key handle is valid. During the test, I noticed that tpm2_start_auth_session() uses the uninitialized stack value as the key handle since tpm2_load_null() returns 0 despite the integrity failure and proceeds with TPM2_CC_START_AUTH_SESS with this value as salt key handle. Set rc to -ENODEV on the mismatch. The error path then disables the chip and returns the correct code to the caller. Tested in QEMU with swtpm and CONFIG_TCG_TPM2_HMAC=y by making TPM2_CC_CONTEXT_LOAD fail with TPM2_RC_INTEGRITY and changing the name of the re-created null key. The chip is now disabled on the mismatch. | ||||
| CVE-2026-98847 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rtc: spear: initialize IRQ state before requesting alarm IRQ devm_request_irq() enables the interrupt before it returns, so the handler may run while probe is still initializing the device. Initialize the MMIO address and spinlock before requesting the alarm IRQ. | ||||
| CVE-2026-98851 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_flow_offload: drop flowtable reference on init error path nft_flow_offload_init() bumps the flowtable use count with nft_use_inc() before calling nf_ct_netns_get(). When the latter fails, the error is returned as-is and the reference is leaked. The upper layers do not balance it either: nf_tables_newexpr() clears expr->ops when the expression init callback fails, so the nft_expr_more() iteration in nft_rule_expr_deactivate() and nf_tables_rule_destroy() stops right before the failed expression and its ->destroy callback, which would drop the reference, never runs. Each failed rule addition therefore leaks one flowtable reference and the flowtable can no longer be removed: NFT_MSG_DELFLOWTABLE keeps reporting -EBUSY even though no rule references it. Save the nf_ct_netns_get() return value and undo the nft_use_inc() when it fails, restoring the inc/dec pairing within nft_flow_offload_init() itself. | ||||
| CVE-2026-98855 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: of/overlay: put property on deadprops only after changeset add succeeds add_changeset_property() links a new property of a not-yet-live target node into the node's deadprops list before handing it to of_changeset_add_property(). If that fails, the error path frees the property but leaves the freed pointer linked in deadprops, and of_node_release() frees it a second time when the aborted overlay's node is released. Record the changeset entry first and link the property into deadprops only on success. of_changeset_add_property() never looks at the node's property lists, so the order of the two steps is otherwise immaterial, and the error path frees a property that nothing references. | ||||
| CVE-2026-98858 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix task_work add use-after-free with SQPOLL For SQPOLL, the sqpoll thread runs task_work off its own list and doesn't need to be told about it, so it can pop and complete a request as soon as mpscq_push() has published it. If that was the last request holding the ring alive, io_ring_exit_work() then frees the ctx, stops the thread, and with it the tctx, while io_req_normal_work_add() is still looking at both after the push: BUG: KASAN: slab-use-after-free in io_req_normal_work_add+0x439/0x510 Read of size 4 at addr ff11000000ca0000 by task repro/55 (...) BUG: KASAN: slab-use-after-free in queue_work_on+0x25/0x70 Write of size 8 at addr ff11000000c3bd00 by task repro/55 Hold an RCU read lock across the add, like io_req_local_work_add() already does, and have io_ring_exit_work() wait for a grace period for SQPOLL rings as well before freeing the ctx. | ||||
| CVE-2026-98863 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Re-pend GET_NESTED_STATE_PAGES if getting said pages fails Re-pend GET_NESTED_STATE_PAGES before exiting to userspace if getting the nested pages fails in the KVM_RUN path. If userspace re-runs the vCPU, and vmcs02 holds valid PFNs from the *previous* run of L2, then KVM could re-enter L2 with stale, unpinned PFNs mapped into e.g. the vAPIC page. Note, both SVM and VMX (as of commit 11722439fb20 ("KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit") ensure the request is cleared on VM-Exit (including the "forced" case), i.e. there is no risk of double-mapping due to emulated VMLAUNCH/VMRESUME/VMRUN *and* the request trying to map the nested pages. | ||||
| CVE-2026-98867 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: bound the logical key offset from persistent memory cache_key_decode() takes a key's logical off from the cache device and later indexes req_key_tree->subtrees[] by it in get_subtree(). An off past the device forms a subtree pointer outside the array, which rb_insert() writes through during replay. Reject a key of zero length, or whose off+len (computed in 64 bits) exceeds the device size, before it is used. | ||||
| CVE-2026-85362 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-18 | 7 High |
| Release of invalid pointer or reference in Windows Management Instrumentation allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-97811 | 1 Microsoft | 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more | 2026-10-18 | 7.8 High |
| Double free in OpenSSH for Windows allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-112015 | 1 Omnigent-ai | 1 Omnigent | 2026-10-18 | 7.5 High |
| Omnigent 0.3.0 before 0.14.0 contains a path traversal vulnerability that allows authenticated users to escape the workspace by setting os_env.cwd on nested sub-agents. Attackers can upload a bundle whose sub-agent uses an absolute or parent-traversing working directory, bypassing root-only validation in bundles.py, to read and write host files as the runner user. | ||||
| CVE-2026-112018 | 1 Jkuhlmann | 1 Cgltf | 2026-10-18 | 7 High |
| cgltf through 1.15 contains a heap out-of-bounds write vulnerability in cgltf_accessor_unpack_floats() that allows attackers to write outside the output buffer via unchecked sparse accessor indices. Attackers can supply a crafted glTF or GLB file with large sparse indices to corrupt heap memory, crash applications, and potentially execute code when cgltf_validate() is not called. | ||||
| CVE-2026-112019 | 1 Jkuhlmann | 1 Cgltf | 2026-10-18 | 6.1 Medium |
| cgltf through 1.15 contains a heap out-of-bounds read vulnerability in cgltf_accessor_unpack_floats() that advances the sparse values cursor by the base bufferView byteStride. Attackers can supply a crafted glTF or GLB file that passes cgltf_validate() to read adjacent heap memory into vertex data or crash applications. | ||||
| CVE-2026-112047 | 2 Hackerbay, Oneuptime | 2 Oneuptime, Oneuptime | 2026-10-18 | 5.4 Medium |
| OneUptime 14.0.2 before 14.0.69 contains an incorrect authorization vulnerability that allows authenticated project members to act on clusters outside their scope by exploiting project-wide permission checks. Attackers can call the AI access test, agent reset, kubectl plan approval and incident AI conversation features to learn agent RBAC permissions, disconnect agents, approve kubectl changes, or run commands on unauthorized resources. | ||||
| CVE-2026-112025 | 1 Light0011 | 1 Cms | 2026-10-18 | 7.3 High |
| A weakness has been identified in light0011 cms c774dce31c6df0055568a8d5c53d964d99be199d/f72cf46f601efb2a0618c3814cc2f61380b38930. This impacts an unknown function of the file App/Home/Controller/UserController.class.php of the component Captcha Validation. Executing a manipulation can lead to improper access controls. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-98769 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd generic_set_cmd() and generic_get_cmd() use the low nibble of ctrl->bRequest as an index into con->data[]: u8 cmd = (ctrl->bRequest & 0x0F); /* 0 .. 15 */ ... con->data[cmd] = value; /* OOB when cmd >= 5 */ struct usb_audio_control (include/linux/usb/audio.h) declares data as a 5-element array, so indices 5 through 15 write (or read) up to 44 bytes past the end of the array on the heap. A malicious USB host can craft a class-specific SET_CUR / GET_CUR request with an arbitrary bRequest value, triggering the out-of-bounds access from an IRQ completion handler with no further preconditions. Add an ARRAY_SIZE() guard to both functions. | ||||
| CVE-2026-98770 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: Fix the jack descriptor array sizes The jack in/out descriptor arrays in struct f_midi2_usb_config have the size of MAX_CABLES, which look reasonable -- but it turned out to be incorrect. Namely, the entries for those arrays are added from both inputs and outputs, hence for each loop cycle, it adds two, ended up with as twice as the expected size. This inconsistency may result in potential OOB when a large number of jacks are set up via configfs, although the max number of cables (the loop count) is limited to MAX_CABLES. For addressing it, correct the jack_ins & jack_outs array sizes to twice, MAX_CABLES * 2. | ||||
| CVE-2026-98774 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rust_binder: cancel deferred work items in thread exit If there are deferred work items on the thread todo list, then they are not cleaned up in the Thread::release() method. Thus, update the code to clean up the work items even if they are deferred. This can happen if the thread dies while it has an active outgoing transaction. | ||||
| CVE-2026-98780 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix IP instance memory leak on kobject add failure amdgpu_discovery_sysfs_ips() allocates ip_hw_instance with kzalloc_flex() and initializes its embedded kobject before calling kobject_add(). If kobject_add() fails, the return value is ignored and execution continues without dropping the initial kobject reference. The failed kobject is not retained in the kset list, so the normal sysfs teardown path cannot find it. As a result, ip_hw_instance_release() is never called and the ip_hw_instance allocation is leaked. Call kobject_put() when kobject_add() fails so the initial reference is dropped and ip_hw_instance_release() can free the allocation. Keep the existing best-effort sysfs behavior by continuing with the remaining IP entries after the failed registration. The issue was identified by a static analysis tool I developed and confirmed by manual review. (cherry picked from commit 5c75fbcca8af1096d8d9415b91d8ea6212c22ee1) | ||||
| CVE-2026-98782 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix ovl adaptor platform device leak mtk_drm_probe() creates an OVL adaptor platform device with platform_device_register_data() when the display pipeline requires the OVL adaptor. If a later initialization step fails, the probe error path releases the DRM resources without unregistering the already registered OVL adaptor device. The normal remove path likewise leaves the device registered after the DRM driver is unbound. Keep track of whether the OVL adaptor was successfully registered and unregister it on probe failure. Also recover the platform device from the stored DDP component device and unregister it during normal removal. The issue was identified by a static analysis tool I developed and confirmed by manual review. | ||||