| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/syscalls: Add spectre boundary for syscall dispatch table
The s390 syscall number is directly controlled by userspace, but does
not have an array_index_nospec() boundary to prevent access past the
syscall function pointer tables. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: set fileio bio failed in short read case
For file-backed mount, IO requests are handled by vfs_iocb_iter_read().
However, it can be interrupted by SIGKILL, returning the number of
bytes actually copied. Unused folios in bio are unexpectedly marked
as uptodate.
vfs_read
filemap_read
filemap_get_pages
filemap_readahead
erofs_fileio_readahead
erofs_fileio_rq_submit
vfs_iocb_iter_read
filemap_read
filemap_get_pages <= detect signal
erofs_fileio_ki_complete <= set all folios uptodate
This patch addresses this by setting short read bio with an error
directly. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix skb_put() panic on non-linear skb during reassembly
In iptfs_reassem_cont(), IP-TFS attempts to append data to the new inner
packet 'newskb' that is being reassembled. First a zero-copy approach is
tried if it succeeds then newskb becomes non-linear.
When a subsequent fragment in the same datagram does not meet the
fast-path conditions, a memory copy is performed. It calls skb_put() to
append the data and as newskb is non-linear it triggers
SKB_LINEAR_ASSERT check.
Oops: invalid opcode: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:skb_put+0x3c/0x40
[...]
Call Trace:
<IRQ>
iptfs_reassem_cont+0x1ab/0x5e0 [xfrm_iptfs]
iptfs_input_ordered+0x2af/0x380 [xfrm_iptfs]
iptfs_input+0x122/0x3e0 [xfrm_iptfs]
xfrm_input+0x91e/0x1a50
xfrm4_esp_rcv+0x3a/0x110
ip_protocol_deliver_rcu+0x1d7/0x1f0
ip_local_deliver_finish+0xbe/0x1e0
__netif_receive_skb_core.constprop.0+0xb56/0x1120
__netif_receive_skb_list_core+0x133/0x2b0
netif_receive_skb_list_internal+0x1ff/0x3f0
napi_complete_done+0x81/0x220
virtnet_poll+0x9d6/0x116e [virtio_net]
__napi_poll.constprop.0+0x2b/0x270
net_rx_action+0x162/0x360
handle_softirqs+0xdc/0x510
__irq_exit_rcu+0xe7/0x110
irq_exit_rcu+0xe/0x20
common_interrupt+0x85/0xa0
</IRQ>
<TASK>
Fix this by checking if the skb is non-linear. If it is, linearize it by
calling skb_linearize(). As the initial allocation of newskb originally
reserved enough tailroom for the entire reassembled packet we do not
need to check if we have enough tailroom or extend it. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: avoid memory leak in magicmouse_report_fixup()
The magicmouse_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Fix use-after-free and list corruption on sender error
The analysis from Breno:
When the SMI sender returns an error, smi_work() delivers an error
response but then jumps back to restart without cleaning up properly:
1. intf->curr_msg is not cleared, so no new message is pulled
2. newmsg still points to the message, causing sender() to be called
again with the same message
3. If sender() fails again, deliver_err_response() is called with
the same recv_msg that was already queued for delivery
This causes list_add corruption ("list_add double add") because the
recv_msg is added to the user_msgs list twice. Subsequently, the
corrupted list leads to use-after-free when the memory is freed and
reused, and eventually a NULL pointer dereference when accessing
recv_msg->done.
The buggy sequence:
sender() fails
-> deliver_err_response(recv_msg) // recv_msg queued for delivery
-> goto restart // curr_msg not cleared!
sender() fails again (same message!)
-> deliver_err_response(recv_msg) // tries to queue same recv_msg
-> LIST CORRUPTION
Fix this by freeing the message and setting it to NULL on a send error.
Also, always free the newmsg on a send error, otherwise it will leak. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Initialize free_qp completion before using it
In irdma_create_qp, if ib_copy_to_udata fails, it will call
irdma_destroy_qp to clean up which will attempt to wait on
the free_qp completion, which is not initialized yet. Fix this
by initializing the completion before the ib_copy_to_udata call. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: clamp SCO altsetting table indices
btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.
While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[]. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix circular locking dependency in nci_close_device
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and the transport is closed, so the work will see it and return
-ENETDOWN.
NIPA has been hitting this running the nci selftest with a debug
kernel on roughly 4% of the runs. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: validate inner IPv4 header length in IPTFS payload
Add validation of the inner IPv4 packet tot_len and ihl fields parsed
from decrypted IPTFS payloads in __input_process_payload(). A crafted
ESP packet containing an inner IPv4 header with tot_len=0 causes an
infinite loop: iplen=0 leads to capturelen=min(0, remaining)=0, so the
data offset never advances and the while(data < tail) loop never
terminates, spinning forever in softirq context.
Reject inner IPv4 packets where tot_len < ihl*4 or ihl*4 < sizeof(struct
iphdr), which catches both the tot_len=0 case and malformed ihl values.
The normal IP stack performs this validation in ip_rcv_core(), but IPTFS
extracts and processes inner packets before they reach that layer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nxp-nci: allow GPIOs to sleep
Allow the firmware and enable GPIOs to sleep.
This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.
-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 -- |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create
We have recently observed a number of subvolumes with broken dentries.
ls-ing the parent dir looks like:
drwxrwxrwt 1 root root 16 Jan 23 16:49 .
drwxr-xr-x 1 root root 24 Jan 23 16:48 ..
d????????? ? ? ? ? ? broken_subvol
and similarly stat-ing the file fails.
In this state, deleting the subvol fails with ENOENT, but attempting to
create a new file or subvol over it errors out with EEXIST and even
aborts the fs. Which leaves us a bit stuck.
dmesg contains a single notable error message reading:
"could not do orphan cleanup -2"
2 is ENOENT and the error comes from the failure handling path of
btrfs_orphan_cleanup(), with the stack leading back up to
btrfs_lookup().
btrfs_lookup
btrfs_lookup_dentry
btrfs_orphan_cleanup // prints that message and returns -ENOENT
After some detailed inspection of the internal state, it became clear
that:
- there are no orphan items for the subvol
- the subvol is otherwise healthy looking, it is not half-deleted or
anything, there is no drop progress, etc.
- the subvol was created a while ago and does the meaningful first
btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much
later.
- after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT,
which results in a negative dentry for the subvolume via
d_splice_alias(NULL, dentry), leading to the observed behavior. The
bug can be mitigated by dropping the dentry cache, at which point we
can successfully delete the subvolume if we want.
i.e.,
btrfs_lookup()
btrfs_lookup_dentry()
if (!sb_rdonly(inode->vfs_inode)->vfs_inode)
btrfs_orphan_cleanup(sub_root)
test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
btrfs_search_slot() // finds orphan item for inode N
...
prints "could not do orphan cleanup -2"
if (inode == ERR_PTR(-ENOENT))
inode = NULL;
return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume
btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
on the root when it runs, so it cannot run more than once on a given
root, so something else must run concurrently. However, the obvious
routes to deleting an orphan when nlinks goes to 0 should not be able to
run without first doing a lookup into the subvolume, which should run
btrfs_orphan_cleanup() and set the bit.
The final important observation is that create_subvol() calls
d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if
the dentry cache gets dropped, the next lookup into the subvolume will
make a real call into btrfs_orphan_cleanup() for the first time. This
opens up the possibility of concurrently deleting the inode/orphan items
but most typical evict() paths will be holding a reference on the parent
dentry (child dentry holds parent->d_lockref.count via dget in
d_alloc(), released in __dentry_kill()) and prevent the parent from
being removed from the dentry cache.
The one exception is delayed iputs. Ordered extent creation calls
igrab() on the inode. If the file is unlinked and closed while those
refs are held, iput() in __dentry_kill() decrements i_count but does
not trigger eviction (i_count > 0). The child dentry is freed and the
subvol dentry's d_lockref.count drops to 0, making it evictable while
the inode is still alive.
Since there are two races (the race between writeback and unlink and
the race between lookup and delayed iputs), and there are too many moving
parts, the following three diagrams show the complete picture.
(Only the second and third are races)
Phase 1:
Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set
btrfs_mksubvol()
lookup_one_len()
__lookup_slow()
d_alloc_parallel()
__d_alloc() // d_lockref.count = 1
create_subvol(dentry)
// doesn't touch the bit..
d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Lock all vCPUs when synchronzing VMSAs for SNP launch finish
Lock all vCPUs when synchronizing and encrypting VMSAs for SNP guests, as
allowing userspace to manipulate and/or run a vCPU while its state is being
synchronized would at best corrupt vCPU state, and at worst crash the host
kernel.
Opportunistically assert that vcpu->mutex is held when synchronizing its
VMSA (the SEV-ES path already locks vCPUs). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: make use of smbdirect_socket.recv_io.credits.available
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: let send_done handle a completion without IB_SEND_SIGNALED
With smbdirect_send_batch processing we likely have requests without
IB_SEND_SIGNALED, which will be destroyed in the final request
that has IB_SEND_SIGNALED set.
If the connection is broken all requests are signaled
even without explicit IB_SEND_SIGNALED. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: make use of smbdirect_socket.send_io.bcredits
It turns out that our code will corrupt the stream of
reassabled data transfer messages when we trigger an
immendiate (empty) send.
In order to fix this we'll have a single 'batch' credit per
connection. And code getting that credit is free to use
as much messages until remaining_length reaches 0, then
the batch credit it given back and the next logical send can
happen. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: make use of smbdirect_socket.recv_io.credits.available
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer.
This fixes regression Namjae reported with
the 6.18 release. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Check set_default_submission() before deferencing
When the i915 driver firmware binaries are not present, the
set_default_submission pointer is not set. This pointer is
dereferenced during suspend anyways.
Add a check to make sure it is set before dereferencing.
[ 23.289926] PM: suspend entry (deep)
[ 23.293558] Filesystems sync: 0.000 seconds
[ 23.298010] Freezing user space processes
[ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds)
[ 23.309766] OOM killer disabled.
[ 23.313027] Freezing remaining freezable tasks
[ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 23.342038] serial 00:05: disabled
[ 23.345719] serial 00:02: disabled
[ 23.349342] serial 00:01: disabled
[ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 23.361635] ata1.00: Entering standby power mode
[ 23.368863] ata2.00: Entering standby power mode
[ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 23.452194] #PF: supervisor instruction fetch in kernel mode
[ 23.457896] #PF: error_code(0x0010) - not-present page
[ 23.463065] PGD 0 P4D 0
[ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI
[ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary)
[ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 23.496511] Workqueue: async async_run_entry_fn
[ 23.501087] RIP: 0010:0x0
[ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246
[ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f
[ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000
[ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff
[ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8
[ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68
[ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000
[ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0
[ 23.572539] PKRU: 55555554
[ 23.575281] Call Trace:
[ 23.577770] <TASK>
[ 23.579905] intel_engines_reset_default_submission+0x42/0x60
[ 23.585695] __intel_gt_unset_wedged+0x191/0x200
[ 23.590360] intel_gt_unset_wedged+0x20/0x40
[ 23.594675] gt_sanitize+0x15e/0x170
[ 23.598290] i915_gem_suspend_late+0x6b/0x180
[ 23.602692] i915_drm_suspend_late+0x35/0xf0
[ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10
[ 23.611843] dpm_run_callback+0x78/0x1c0
[ 23.615817] device_suspend_late+0xde/0x2e0
[ 23.620037] async_suspend_late+0x18/0x30
[ 23.624082] async_run_entry_fn+0x25/0xa0
[ 23.628129] process_one_work+0x15b/0x380
[ 23.632182] worker_thread+0x2a5/0x3c0
[ 23.635973] ? __pfx_worker_thread+0x10/0x10
[ 23.640279] kthread+0xf6/0x1f0
[ 23.643464] ? __pfx_kthread+0x10/0x10
[ 23.647263] ? __pfx_kthread+0x10/0x10
[ 23.651045] ret_from_fork+0x131/0x190
[ 23.654837] ? __pfx_kthread+0x10/0x10
[ 23.658634] ret_from_fork_asm+0x1a/0x30
[ 23.662597] </TASK>
[ 23.664826] Modules linked in:
[ 23.667914] CR2: 0000000000000000
[ 23.671271] ------------[ cut here ]------------
(cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix trace_marker copy link list updates
When the "copy_trace_marker" option is enabled for an instance, anything
written into /sys/kernel/tracing/trace_marker is also copied into that
instances buffer. When the option is set, that instance's trace_array
descriptor is added to the marker_copies link list. This list is protected
by RCU, as all iterations uses an RCU protected list traversal.
When the instance is deleted, all the flags that were enabled are cleared.
This also clears the copy_trace_marker flag and removes the trace_array
descriptor from the list.
The issue is after the flags are called, a direct call to
update_marker_trace() is performed to clear the flag. This function
returns true if the state of the flag changed and false otherwise. If it
returns true here, synchronize_rcu() is called to make sure all readers
see that its removed from the list.
But since the flag was already cleared, the state does not change and the
synchronization is never called, leaving a possible UAF bug.
Move the clearing of all flags below the updating of the copy_trace_marker
option which then makes sure the synchronization is performed.
Also use the flag for checking the state in update_marker_trace() instead
of looking at if the list is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/platform/uv: Handle deconfigured sockets
When a socket is deconfigured, it's mapped to SOCK_EMPTY (0xffff). This causes
a panic while allocating UV hub info structures.
Fix this by using NUMA_NO_NODE, allowing UV hub info structures to be
allocated on valid nodes. |
