Export limit exceeded: 16062 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16062 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-85452 | 1 Themoos | 1 Ui-moos | 2026-09-04 | 8.8 High |
| MOOS ui-moos through 50b9c6c contains a buffer overflow vulnerability in ScopeTabPane.cpp and ScopeGrid.cpp where client and variable names are formatted into fixed 1024-byte buffers using sprintf without length validation. Attackers can supply arbitrarily long MOOS identifiers that overflow the buffers when an operator selects process list entries or pokes variables, enabling code execution. | ||||
| CVE-2026-85670 | 1 Huggingface | 1 Tokenizers | 2026-09-04 | 6.5 Medium |
| tokenizers (Hugging Face) is affected by an out-of-bounds buffer access in BpeBuilder::build (tokenizers/src/models/bpe/model.rs). When loading a tokenizer.json via Tokenizer::from_file/from_str, the builder sizes a scratch buffer to the longest vocabulary key, then writes each concatenated merge rule into it. A merge whose concatenated token exceeds the longest vocabulary key overruns the buffer, which Rust turns into a panic that aborts the process in Rust and FFI embeddings. This occurs at load time with no encoding required, so an attacker who supplies a crafted tokenizer.json can cause a denial of service. A secondary defect at the same location can cause a usize underflow (panic in debug, potential memory corruption in release) when continuing_subword_prefix is set and a merge token is shorter than the prefix. Observed in version 0.23.1. | ||||
| CVE-2026-80779 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/ionic: avoid OOB TX partner lookup for hwstamp RXQ The dedicated hardware timestamp RX queue is allocated with q->index equal to lif->ionic->nrxqs_per_lif. The normal txqcqs array only contains the regular queue pairs, so using that index to set rxq->partner can read one entry past txqcqs[] and then write through the derived pointer. Only link RX/TX partners for normal queue-pair indexes. Leave the hwstamp RX queue unpaired, and make the XDP_TX path abort cleanly if an RX queue has no TX partner. | ||||
| CVE-2026-80795 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix out-of-bounds write in nci_target_auto_activated() nci_target_auto_activated() appends a target to the fixed-size array ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets without first checking the array is full; unlike its sibling nci_add_new_target(), which bails out when n_targets already equals NCI_MAX_DISCOVERED_TARGETS. ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters NCI_DISCOVERY without clearing the target list) and reports an auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the limit. The append then writes a struct nfc_target past the end of the array (a slab out-of-bounds write), and nfc_targets_found() goes on to walk the array with the inflated count: BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci] Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12 Workqueue: nfc0_nci_rx_wq nci_rx_work [nci] Call trace: nci_add_new_protocol+0x94/0x2ac [nci] nci_ntf_packet+0xddc/0x11a0 [nci] nci_rx_work+0x15c/0x1e0 [nci] process_one_work+0x2dc/0x500 worker_thread+0x240/0x460 kthread+0x1c0/0x1d0 ret_from_fork+0x10/0x20 The buggy address belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1024 bytes to the right of allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618) Guard nci_target_auto_activated() with the same check used by nci_add_new_target(). | ||||
| CVE-2026-53720 | 1 Jetperch | 1 Pymonocypher | 2026-09-04 | N/A |
| pymonocypher uses cython to wrap the Monocypher C library. Prior to version 4.0.2.8, the argon2i_32 implementation does not check the nb_blocks size. If the caller does not provide a sufficiently large buffer based on the API contract, then argon2i_32 will write past the end of the buffer and possibly corrupt the heap. This issue has been patched in version 4.0.2.8. | ||||
| CVE-2026-53059 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count. | ||||
| CVE-2026-80748 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: loongson2: Fix sg iteration in data reorder functions In ls2k0500_mmc_reorder_cmd_data() and ls2k2000_mmc_reorder_cmd_data(), the for_each_sg() macro already iterates over the scatterlist entries, with 'sg' pointing to the current entry. However, the code incorrectly uses '&sg[i]' and 'sg_dma_len(&sg[i])' inside the loop, which treats 'sg' as an array base and indexes it again, leading to access of wrong sg entries (or out-of-bounds if the list is not an array). | ||||
| CVE-2026-84698 | 1 Px4 | 1 Autopilot | 2026-09-04 | 6.5 Medium |
| PX4 Autopilot contains a heap buffer overflow vulnerability in the sd_bench command that writes a four-byte block number into a user-supplied sized allocation. Attackers can invoke sd_bench with a block size below four bytes to overflow the heap buffer and potentially execute code or crash the system. | ||||
| CVE-2026-64353 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Keep dynamic inner array lookups nullable An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its inner map template. A concrete inner array with a different max_entries value can then replace the template. After a successful outer map lookup, the verifier represents the resulting map pointer using the inner map template. Const-key lookup nullness elision consequently uses the template max_entries even though the runtime helper uses the concrete inner map max_entries. Do not elide lookup result nullness for maps marked with BPF_F_INNER_MAP, because the template max_entries does not prove that the key is in bounds for the concrete runtime map. | ||||
| CVE-2026-84143 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-09-03 | 9.8 Critical |
| Internally found bugs present in Thunderbird 154, Thunderbird ESR 153.1 and Thunderbird ESR 140.14. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 155, Firefox ESR 140.15, Firefox ESR 153.2, Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. | ||||
| CVE-2026-64431 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid calling post_write_mst_fixup() for invalid index_block ntfs_icx_ib_sync_write() calls post_write_mst_fixup() when ntfs_ib_write() returns an error, intending to restore the buffer after a failed write. However, ntfs_ib_write() returns an error immediately if pre_write_mst_fixup() validation fails. The caller, ntfs_icx_ib_sync_write(), interprets any error as a write failure requiring rollback. It does not differentiate between I/O errors and validation failures, and calls post_write_mst_fixup() anyway. Since post_write_mst_fixup() assumes that the index_block contents is correct, it doesn't perform the boundary checks, which results in out-of-bounds memory access. An attacker can craft a malicious NTFS image with: - large index_block.usa_ofs offset, pointing outside the ntfs_record - index_block.usa_count = 0, causing integer underflow - or index_block.usa_count larger than actual number of sectors in the ntfs_record, causing out-of-bounds access KASAN reports describing the memory corruption: ================================================================== BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x19c/0x1d0 Read of size 2 at addr ffff8881586c9018 by task p/9428 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 print_report+0x139/0x4ad ? post_write_mst_fixup+0x19c/0x1d0 ? __virt_addr_valid+0x262/0x500 ? post_write_mst_fixup+0x19c/0x1d0 kasan_report+0xe4/0x1d0 ? post_write_mst_fixup+0x19c/0x1d0 post_write_mst_fixup+0x19c/0x1d0 ntfs_icx_ib_sync_write+0x179/0x220 ntfs_inode_sync_filename+0x83d/0x1080 __ntfs_write_inode+0x1049/0x1480 ntfs_file_fsync+0x131/0x9b0 ================================================================== BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x1aa/0x1d0 Write of size 2 at addr ffff8881586c91fe by task p/9428 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 print_report+0x139/0x4ad ? post_write_mst_fixup+0x1aa/0x1d0 ? __virt_addr_valid+0x262/0x500 ? post_write_mst_fixup+0x1aa/0x1d0 kasan_report+0xe4/0x1d0 ? post_write_mst_fixup+0x1aa/0x1d0 post_write_mst_fixup+0x1aa/0x1d0 ntfs_icx_ib_sync_write+0x179/0x220 ntfs_inode_sync_filename+0x83d/0x1080 __ntfs_write_inode+0x1049/0x1480 ntfs_file_fsync+0x131/0x9b0 ================================================================== Let's move the post_write_mst_fixup() call to ntfs_ib_write(). The ntfs_ib_write() function calls pre_write_mst_fixup() at the beginning. If the index_block contents is invalid, pre_write_mst_fixup() fails and ntfs_ib_write() returns early without calling post_write_mst_fixup() on bad index_block. | ||||
| CVE-2026-84351 | 2 Google, Microsoft | 2 Chrome, Windows | 2026-09-03 | 8.3 High |
| Buffer overflow in GPU in Google Chrome on on Windows prior to 152.0.7977.75 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2025-12768 | 2 Rockwell Automation, Rockwellautomation | 2 Factorytalk Historian Machine Edition, Factorytalk Historian Machine Edition | 2026-09-03 | N/A |
| A security issue exists within FactoryTalk® Historian Machine Edition. An attacker with low-level authentication could exploit this vulnerability to achieve remote code execution on the affected device. | ||||
| CVE-2025-9189 | 3 Digilent, Measx, Ni | 3 Dasylab, Dasylab, Dasylab | 2026-09-03 | 7.8 High |
| There is an out of bounds write vulnerability due to improper bounds checking resulting in a large destination address when parsing a DSB file with Digilent DASYLab. This vulnerability may result in arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted DSB file. The vulnerability affects all versions of DASYLab. | ||||
| CVE-2026-64086 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) include PEC byte in pmbus_block_xfer read buffer adm1266_pmbus_block_xfer() sets up the read transaction with .buf = data->read_buf, .len = ADM1266_PMBUS_BLOCK_MAX + 2, but read_buf in struct adm1266_data is declared as u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1]; For a max-length block response (length byte = 255 + up to 1 PEC byte), the i2c controller is told to write 257 bytes into a 256-byte buffer, putting one byte past the end of read_buf. The same response also makes the subsequent PEC compare if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) read a byte beyond the array. Bump the read_buf declaration to ADM1266_PMBUS_BLOCK_MAX + 2 so the buffer can hold the length byte, up to 255 payload bytes, and the PEC byte the i2c_msg length already accounts for. | ||||
| CVE-2026-64204 | 1 Ni | 1 Labview | 2026-09-03 | 7.8 High |
| There is a memory corruption vulnerability recently discovered in NI LabVIEW that may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2026 Q3 (26.3.0) and prior versions. | ||||
| CVE-2026-64446 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie() supplicant_ie is a 256-byte array in struct security_priv. The WPA and WPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2); where wpa_ielen is the raw IE length field (u8, 0-255). When a local user supplies a connect request via nl80211 with a crafted WPA IE of length 255, wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into the adjacent last_mic_err_time field. rtw_parse_wpa_ie() does not prevent this: its length consistency check compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255 when wpa_ie_len = 257, so the check passes silently. Add explicit bounds checks for both the WPA and WPA2 paths before the memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the supplicant_ie buffer. | ||||
| CVE-2026-64449 | 1 Linux | 1 Linux Kernel | 2026-09-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: bound slave read/write to the kern_buf size The SLAVE-path helpers buffer_to_user() and buffer_from_user() copy 'count' bytes into/out of the fixed-size kern_buf (size_buf == PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, without bounding *ppos + count against size_buf. vme_user_write()/vme_user_read() only clamp count to the VME window size (image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from the user-supplied slave.size -- validated against the VME address space (up to VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the window exceeds 128 KiB, a write()/read() copies past the kern_buf allocation. Clamp count against size_buf in both helpers, with an early return when *ppos is already at/after the buffer end. *ppos is >= 0 here (the caller rejects negative offsets), so size_buf - *ppos cannot wrap. This mirrors the existing clamp in the MASTER-path helpers resource_to_user() / resource_from_user(), and matches the read()/write() convention of a short transfer at end-of-buffer. Found by static analysis (CodeQL taint tracking + CBMC bounded model checking) and confirmed dynamically under KASAN with the vme_fake bridge: BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80 Write of size 262144 at addr ffff888004100000 by task trigger/68 _copy_from_user+0x2d/0x80 vme_user_write+0x13e/0x240 [vme_user] vfs_write+0x1b8/0x7a0 ksys_write+0xb8/0x150 | ||||
| CVE-2026-85084 | 1 Samsung Open Source | 1 Tizenfx | 2026-09-03 | 6.3 Medium |
| Out-of-bounds Write and Improper Validation of Array Index vulnerability in Samsung Open Source TizenFX Samsung/TizenFX allows Overflow Buffers. | ||||
| CVE-2026-64201 | 1 Ni | 1 Labview | 2026-09-03 | 7.8 High |
| There is a memory corruption vulnerability recently discovered in NI LabVIEW that may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI. This vulnerability affects NI LabVIEW 2026 Q3 (26.3.0) and prior versions. | ||||