Export limit exceeded: 409268 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409268 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409268 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409268 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80971 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: clear the URB pointers on disconnect bcd2000_free_usb_related_resources() frees both URBs and leaves the pointers behind: usb_kill_urb(bcd2k->midi_out_urb); usb_kill_urb(bcd2k->midi_in_urb); usb_free_urb(bcd2k->midi_out_urb); usb_free_urb(bcd2k->midi_in_urb); The rawmidi device outlives that call. A substream that is still open when the device is unplugged reaches bcd2000_midi_send() from the trigger path on close. That function writes to the freed URB and then hands it to the USB core: bcd2k->midi_out_urb->transfer_buffer_length = BUFSIZE; ... ret = usb_submit_urb(bcd2k->midi_out_urb, GFP_ATOMIC); usb_kill_urb() does not stop a later submission either, so a submit that races the disconnect can requeue the URB after it has been reaped. midi_in_urb is exposed the same way: bcd2000_input_complete() resubmits it from the completion handler. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in bcd2000_midi_send [snd_bcd2000] Write of size 4 at addr ffff00001827d388 by task bpoc/168 __asan_store4 bcd2000_midi_send [snd_bcd2000] bcd2000_midi_output_trigger [snd_bcd2000] snd_rawmidi_kernel_write1 close_substream.part.0 Freed by task 168: usb_free_urb bcd2000_disconnect [snd_bcd2000] BUG: KASAN: slab-use-after-free in usb_submit_urb Read of size 8 at addr ffff00001827d3b8 by task bpoc/168 Clear both pointers after freeing and test them on the paths that can still run. Poison the URBs before freeing them: usb_poison_urb() waits for a running completion handler and rejects any later submission, so after it returns the input path is quiesced and only the rawmidi trigger path can still reach bcd2000_midi_send(). No unpoison is needed; the URBs are freed on the next line. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-80967 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcxhr: initialize mutexes before requesting threaded IRQ pcxhr_probe() requests pcxhr_threaded_irq() before initializing mgr->lock, even though the threaded handler takes that mutex. Initialize the manager locks before request_threaded_irq() so an early interrupt cannot run against uninitialized mutex state during probe. | ||||
| CVE-2026-80944 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Detach sync cmd buffer on interrupted wait mwifiex synchronous commands keep the caller-provided data buffer in cmd_node->data_buf. Several callers pass stack-allocated objects there. If wait_event_interruptible_timeout() is interrupted, the caller can return and release that stack object while the firmware command is still the current command. A late firmware response then reaches the normal response handler, which can copy data through cmd_node->data_buf into the stale stack address. This fixes a stack corruption observed during repeated association and disassociation cycles. The panic trace showed the command wait being interrupted immediately before a bad pointer dereference: cmd_wait_q terminated: -512 Unable to handle kernel paging request at virtual address 002c583837384662 Kernel panic - not syncing: stack-protector: Kernel stack is corrupted ... Tainted: [M]=MACHINE_CHECK The fault address decodes as little-endian ASCII: 0x002c583837384662 -> "bF878X,\0" which is a fragment of the VERSION_EXT firmware string exposed as debugfs "verext": w8997o-V4, RF878X, FP92, 16.92.21.p153.7 The same runs also showed corrupted control data containing: 0x2400372e333531 -> "153.7\0$" which is the tail of the same VERSION_EXT string. This points at a late VERSION_EXT response writing through a stale stack-backed data_buf after the interrupted wait returned. After cancelling pending commands on an interrupted or timed-out wait, detach the caller-owned data buffer from the still-current command. This preserves the existing command cancellation behaviour while preventing a late response from writing through a pointer whose lifetime ended with the waiting caller. Tested on an i.MX8MP board using an 88W8997. | ||||
| CVE-2026-80932 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: flush works in dependency order virtio_vsock_remove() stops the virtqueues and then flushes each work item before freeing the enclosing virtio_vsock. The current order does not account for dependencies between those items: tx_work may queue send_pkt_work, and send_pkt_work may queue rx_work. In particular, send_pkt_work can set restart_rx and release tx_lock. The remove path can then stop the queues and flush rx_work before send_pkt_work queues it. Although the later send_pkt_work flush waits for that producer to finish, nothing waits for the newly queued rx_work, so kfree(vsock) can race with it. KASAN reported: BUG: KASAN: slab-use-after-free in virtio_transport_rx_work+0x487/0x4b0 Read of size 8 at addr ffff888114c2b008 by task kworker/1:1/47 Workqueue: virtio_vsock virtio_transport_rx_work Call Trace: virtio_transport_rx_work+0x487/0x4b0 process_one_work+0x688/0x1120 worker_thread+0x45b/0xd10 Allocated by task 1: virtio_vsock_probe+0xef/0x6b0 Freed by task 84: kfree+0x131/0x3c0 virtio_vsock_remove+0xd1/0x100 Flush the works in producer-to-consumer order. virtio_vsock_vqs_del() has already disabled the queue callbacks and cleared the run flags, so after tx_work and send_pkt_work are drained, no source remains that can queue rx_work after its flush. | ||||
| CVE-2026-80754 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix F55 transmitter electrode count typo During F55 sensor detection, the transmitter (TX) electrode count was incorrectly assigned the value of the receiver (RX) electrode count due to copy-paste typos. This incorrect value was then propagated to the driver data and used by F54 to determine the diagnostics report size. On devices with more RX than TX electrodes, this inflated the perceived TX count, leading to incorrect report size calculations and potential out-of-bounds buffer accesses. Fix the typos by correctly assigning the TX electrode counts. | ||||
| CVE-2026-80737 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: amba-pl011: synchronize DMA teardown dmaengine_terminate_all() does not wait for a running callback, so the TX callback can still touch the TX buffer after it is freed. The RX poll timer reads the RX buffers without the port lock. Switch to dmaengine_terminate_sync() and delete the RX timer before freeing the buffers. | ||||
| CVE-2026-80731 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header dev_validate_header() reads dev->hard_header_len directly when zero-padding short link layer headers for CAP_SYS_RAWIO holders: if (capable(CAP_SYS_RAWIO)) { memset(ll_header + len, 0, dev->hard_header_len - len); return true; } Packet send paths call dev_validate_header() on skbs whose headroom was allocated from an earlier hard_header_len read. If the device is reconfigured so that dev->hard_header_len increases before validation, the memset writes past the reserved buffer, an out-of-bounds write. This out-of-bounds write is masked in some SOCK_RAW paths today because the same concurrent increase can first make skb_push() exceed the reserved headroom and trigger skb_under_panic(). Remove the zero-padding branch before making those hard_header_len reads consistent, so the snapshot fixes do not turn a loud panic into a silent overwrite. This path is only reached for variable length L2 protocols, where len < hard_header_len but len >= min_header_len. No remaining in-tree variable length L2 protocol implements header_ops->validate, and the CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no real value beyond allowing testing of intentionally malformed input. Drop the CAP_SYS_RAWIO branch. The remaining reads of dev->hard_header_len in dev_validate_header() are comparisons only and have no memory safety impact. | ||||
| CVE-2026-80726 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: WARN and clear role.invalid when creating a child shadow page Explicitly clear role.invalid when deriving a child shadow page's role from its parent to harden against bugs elsewhere in KVM, as violating KVM's invariant that invalid pages are NOT on the list of active MMU pages leads to use-after-free due to __kvm_mmu_prepare_zap_page() using list_add() instead of list_move() when processing an invalid shadow page, i.e. makes a bad situation far worse. Yell loudly if the parent is invalid, as it means KVM has missed a validity check, i.e. KVM is attempting to map memory using an invalid/obsolete root, but continue on as the child is otherwise still a valid shadow page. ================================================================== BUG: KASAN: slab-use-after-free in __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] Write of size 8 at addr ff11000153dd1368 by task repro/853 CPU: 1 UID: 1000 PID: 853 Comm: repro Not tainted 7.2.0-rc2-3aec122bdcaf-next-vm #5 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x4b/0x70 print_report+0x153/0x49c kasan_report+0xbc/0xf0 __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] mmu_alloc_root+0x141/0x320 [kvm] kvm_mmu_load+0x612/0x20f0 [kvm] kvm_arch_vcpu_ioctl_run+0x3dd5/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Allocated by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x5f/0x70 kmem_cache_alloc_noprof+0xfe/0x2e0 __kvm_mmu_topup_memory_cache+0x135/0x530 [kvm] paging64_page_fault+0x318/0x1e30 [kvm] kvm_mmu_do_page_fault+0x21d/0x630 [kvm] kvm_mmu_page_fault+0x18c/0x17b0 [kvm] kvm_arch_vcpu_ioctl_run+0x1f35/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free+0xe2/0x400 kvm_mmu_commit_zap_page.part.0+0x1e2/0x310 [kvm] kvm_mmu_free_roots+0x283/0x560 [kvm] kvm_arch_vcpu_ioctl_run+0x33c8/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | ||||
| CVE-2026-80725 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: gro: properly validate BIG TCP aggregation criteria When GRO attempts to aggregate packets beyond GRO_LEGACY_MAX_SIZE (64KB), BIG TCP should only be permitted for plain IPv4 TCP and plain IPv6 TCP (with sufficient MAC header room to insert the temporary HBH jumbo header). However, commit b1a78b9b9886 ("net: add support for ipv4 big tcp") loosened the check in skb_gro_receive(), leading to several issues: 1. skb_gro_receive() checked skb_headroom(p) instead of the actual space before the MAC header (p->mac_header). Because skb_headroom(p) includes mac_len, crafted frames (e.g. injected via AF_PACKET) can pass the check with p->mac_header < 8 bytes. When ipv6_gro_complete() inserts the temporary HBH jumbo header, the memmove() starts before skb->head, causing an out-of-bounds write and wrapping skb->mac_header. 2. It allowed non-IP protocols such as software VLAN (ETH_P_8021Q / ETH_P_8021AD) to aggregate beyond 64KB because p->protocol != ETH_P_IPV6 was true. 3. It checked p->encapsulation instead of NAPI_GRO_CB(skb)->encap_mark, allowing encapsulated flows (e.g. SIT / IPv6-in-IPv4) to aggregate beyond 64KB. Fix skb_gro_receive() to strictly enforce: - NAPI_GRO_CB(skb)->proto == IPPROTO_TCP - Not encapsulated (!NAPI_GRO_CB(skb)->encap_mark && !p->encapsulation) - Protocol must be either ETH_P_IP or ETH_P_IPV6 - If ETH_P_IPV6, p->mac_header must be at least sizeof(struct hop_jumbo_hdr) Returning -E2BIG from skb_gro_receive() ensures that packets which cannot become BIG TCP are cleanly flushed at <= 64KB and delivered intact without dropping. This issue does not exist in mainline (7.0+) because the subsystem was rewritten in commit 81be30c1f5f2 ("net/ipv6: Drop HBH for BIG TCP on RX side"), making this fix relevant only for older stable branches like 6.18.y. | ||||
| CVE-2026-80723 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: of: reserved_mem: prevent OOB when too many dynamic regions are defined On boot, fdt_scan_reserved_mem() saves each dynamically-placed /reserved-memory subnode into a local array of size MAX_RESERVED_REGIONS. If the device tree defines more than MAX_RESERVED_REGIONS dynamically-placed regions, fdt_scan_reserved_mem() writes past the end of the local array. Add a bounds check that logs an error and skips the excess regions, restoring the original behavior. | ||||
| CVE-2026-80722 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate individual TWT params before driver setup ieee80211_process_rx_twt_action() only partially validates a received S1G TWT setup frame before queueing it. An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup() with twt->length too short for the full struct ieee80211_twt_params. The individual path passes twt to drv_add_twt_setup(). Both the tracepoint and the driver callback consume the complete parameters block, not merely req_type. Do not pass a short individual agreement to the driver. Broadcast agreements remain unchanged because they are rejected locally after accessing only req_type. [edit commit message to not overclaim lack of validation nor understate driver impact] | ||||
| CVE-2026-80721 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: ensure no dangling hcon references in iso_conn After iso_conn_del(), ISO sockets should not dereference the hcon any more. Currently, clearing iso_conn::hcon relies on iso_conn_del() releasing the last reference to the iso_conn. Simplify this by explicitly clearing conn->hcon in iso_conn_del(), to avoid more complex reasoning on races about who holds the last reference. | ||||
| CVE-2026-80717 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate Adaptation Indication parameter length The Adaptation Layer Indication parameter contains a fixed 32-bit Adaptation Code Point after its parameter header. However, sctp_verify_param() accepts a header-only parameter because the generic parameter walker only requires the header to be present. sctp_process_param() then reads adaptation_ind beyond the declared parameter. When the malformed parameter is last in an INIT, the read starts at the receive skb tail, and the value is copied into the state cookie returned in the INIT ACK. This may disclose four receive-buffer tail bytes. Require the declared parameter length to match the fixed structure size and abort the association through the existing invalid parameter length path otherwise. | ||||
| CVE-2026-80716 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: wake linked drain waiters on unlink snd_pcm_drain() on a linked stream parks an on-stack wait entry on the drained peer's runtime->sleep, and after schedule_timeout() removes it only if that peer is still found in the caller's group. If group membership changes during the wait and the sleep ends by signal or timeout (so autoremove_wake_function() does not run), finish_wait() is skipped and snd_pcm_drain() returns with the entry still queued on that stream's sleep list; a later wake_up() then walks a freed stack frame. This is reachable by unlinking either the drained or the draining stream. Unlike the close path (snd_pcm_drop() -> snd_pcm_post_stop()), snd_pcm_unlink() never wakes the sleep queues. Wake every group member under the group lock before the membership change, so a linked drainer is released and drops its entry while the streams are still grouped. The window was opened when snd_pcm_link_rwsem stopped being held across the wait and the removal became conditional on group membership (see Fixes). The later switch to finish_wait() kept that conditional removal, so the signal/timeout case remained. | ||||
| CVE-2026-80714 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: do not propagate one-packet flag to synced conns Synced connections can be created before their destination exists. When the destination is later added, ip_vs_bind_dest() copies connection flags from the destination into cp->flags. IP_VS_CONN_F_ONE_PACKET connections are not synced. If a synced connection inherits IP_VS_CONN_F_ONE_PACKET while it is already hashed, expiry can treat it as a one-packet connection and skip unlinking the existing conn_tab node, leaving stale hash nodes pointing at a freed struct ip_vs_conn. Drop IP_VS_CONN_F_ONE_PACKET from destination flags when binding synced connections. | ||||
| CVE-2026-80710 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix undersized format-check buffer fmt_buffer_size in dasd_eckd_check_device_format() is declared as int, even though one of the multiplicands, sizeof(struct eckd_count), is a size_t. The expression trkcount * rpt_max * sizeof(struct eckd_count) is therefore correctly evaluated at 64-bit width, but the result is silently truncated when it is stored back into the 32-bit fmt_buffer_size variable. For a sufficiently large track range (start_unit/stop_unit are caller-controlled) this truncation yields a buffer size far smaller than the number of tracks actually requested. kzalloc() then succeeds with an undersized allocation, while the subsequent channel program build still operates on the untruncated track count and writes past the end of that buffer. Compute the buffer size with check_mul_overflow() and keep it in a size_t, so that a value that no longer fits results in -EINVAL instead of a silently truncated allocation size. | ||||
| CVE-2026-80709 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs There is a wrong upper limit check for the domain value when an EP11 CPRB is processed for sending to a crypto card. This check is only active on custom device nodes but may lead to access heap memory behind perms->adm when an administrative CPRB is sent. Add correct limit (AP_DOMAINS = 256) checking to fix this. | ||||
| CVE-2026-80707 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer Zero the allocated buffer in j1939_session_fresh_new() to ensure it contains no residual data. While there is a potential performance impact if users allocate maximum sized ETP buffers, most real-world use cases are not noticeably affected since the maximum known buffer size is typically around 65K. [mkl: add Message-ID] | ||||
| CVE-2026-80706 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: softing: fw_parse(): validate firmware record spans fw_parse() reads a fixed record header, a firmware-provided payload, and a trailing checksum without knowing the end of the firmware blob. A truncated record can therefore make those reads exceed the blob. The same record also supplies addresses and lengths for writes into DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its bounds check, while the application loader does not bound the staging copy at all. Pass the firmware end to the parser and validate the full source record. Use a signed wide offset for generic DPRAM records and validate the application staging span against the mapped DPRAM before copying. | ||||
| CVE-2026-80702 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: fix guest_memory_dirty bitfield clobbered as size Two sites in vmwgfx_resource.c assign boolean literals to res->guest_memory_size, which is an unsigned long allocation-size field; the intended target is the adjacent res->guest_memory_dirty bitfield. After the assignments the field holds 0 or 1 instead of the resource's MOB allocation size: - vmw_resource_release() writes 0 (false), and - vmw_resource_unbind_list() writes 1 (true). Subsequent revalidation paths read guest_memory_size when computing the dirty page range (vmw_bo_dirty_transfer_to_res()) and the buffer allocation size (vmw_resource_buf_alloc()), producing zero-length walks or wrap-around ranges that read or write past the MOB bitmap. The dirty-tracking intent of the original code (mark the resource as dirtied since the last sync) is also lost, since guest_memory_dirty is never updated. Rename both assignments to guest_memory_dirty. | ||||