| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw has been found in BerriAI LiteLLM up to 1.95.0. Affected by this issue is the function ui_view_session_spend_logs of the file litellm/proxy/spend_tracking/spend_management_endpoints.py of the component Spend Tracking. Executing a manipulation of the argument session_id can lead to authorization bypass. It is possible to launch the attack remotely. The exploit has been published and may be used. Upgrading to version 1.96.0 can resolve this issue. This patch is called 722d9ffa4f6c5ae15702ab9ab2c5f6bf1688308b. The affected component should be upgraded. |
| EspoCRM before 10.0.7 contains an insecure direct object reference vulnerability that allows authenticated users with Import scope access to read other users' attachments by supplying a foreign attachmentId to the Import endpoint. Attackers can create an Import record referencing a known attachment ID, then call the error export endpoint to copy source rows into a downloadable CSV they own. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/pt: Fix stop/start with no update
If pt_event_stop() is called without PERF_EF_UPDATE flag, then
perf_aux_output_end() is not called. A subsequent call to pt_event_start()
will call perf_aux_output_begin() again which violates the rule against
nesting and triggers a WARNING in perf_aux_output_begin().
Originally, pt_event_stop() was never called without PERF_EF_UPDATE,
because the only code paths to do so are from event overflow, and Intel PT
does not do that.
However the introduction of group throttling by commit 9734e25fbf5ae
("perf: Fix the throttle logic for a group") meant that an Intel PT event
could be throttled if it was part of a group. Throttling calls PMU
->stop() / ->start() callbacks without flags.
An example is when AUX area sampling is used. The following commands
hit the issue:
echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate
perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \
-- bash -c 'for i in `seq 1 100000` ; do true ; done'
Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and
perf_aux_output_end() are balanced. A cleared PERF_HES_UPTODATE bit
indicates that an AUX output context is still open.
Amend pt_event_start() / pt_event_stop() accordingly so that begin/end
stay balanced:
- In non-snapshot mode, stop() always closes the buffer (the buffer may
have run out of space, and that accounting is done by the update), so
a following start() opens a fresh one as before.
- In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the
buffer open so that pt_event_snapshot_aux() can still copy from it,
and start() then only re-enables tracing instead of calling
perf_aux_output_begin() again.
Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set
(as is required by the documentation), so a final call to
perf_aux_output_end() is assured. |
| CordysCRM through 1.9.3 contains an authorization bypass vulnerability that allows low-privileged authenticated users to skip permission checks by setting the owner field to their own user id. Attackers can send requests to the follow/record/add endpoints to add follow-up records and overwrite follow_time and follower on any known customer, clue or opportunity. |
| CoreShop through 1.5.5 contains an authorization bypass vulnerability in the OrderController that allows authenticated customers to act on other customers' orders by supplying user-controlled ids. Attackers can omit the data field in OrderConfirm or supply another reshipId to SendReship to confirm receipt of others' orders and overwrite return tracking details. |
| A vulnerability has been identified in RUGGEDCOM CROSSBOW (All versions < V6.0). Affected devices do not properly perform authorization checks for device disconnection requests. This could allow an authenticated attacker with minimal privileges to disconnect active sessions of other users, including administrators, leading to a denial of service. |
| A vulnerability has been identified in RUGGEDCOM CROSSBOW (All versions < V6.0). Affected devices do not properly perform server-side authorization checks for requests to schedule special operations. This could allow an authenticated attacker with minimal privileges to schedule unauthorized operations on devices. |
| JeecgBoot through 3.9.5 contains an insecure direct object reference vulnerability that allows authenticated users to read other users' AI voice generation history via the userId parameter of GET /airag/voice/listByUser. Attackers who know another user's id can retrieve submitted text-to-speech input, voice settings, timestamps, and generated audio file names and paths stored in Redis. |
| Tina is a headless content management system. Prior to tinacms 3.14.0 and @tinacms/app 2.5.14, the /~/* admin preview route in packages/tinacms/src/admin/index.tsx can turn an attacker-controlled hash-router splat into an off-origin iframe URL through packages/@tinacms/app/src/preview.tsx, while packages/@tinacms/app/src/lib/preview-origin.ts derives expectedOrigin from that same URL for the GraphQL message channel in packages/@tinacms/app/src/lib/graphql-reducer.ts. An unauthenticated attacker can send a crafted link to a signed-in editor, cause the admin to frame an attacker origin, and have that frame treated as the trusted preview. The attacker-controlled frame can submit GraphQL reads or mutations that the admin executes with the editor credentials, exposing or modifying protected content. This issue is fixed in tinacms 3.14.0 and @tinacms/app 2.5.14. |
| CiviForm simplifies applications for government benefits programs by reusing applicant data across multiple benefit applications. Prior to 3.33.0, GET /admin/tiDash/editClientForm/:accountId verifies that the requester is a Trusted Intermediary but showEditClientForm performs a raw lookupAccount(accountId) without confirming that the citizen account belongs to the requester's trustedIntermediaryGroup. An authenticated Trusted Intermediary can enumerate accountId values and read the applicant display name, including the citizen's name and email address, for accounts outside the intermediary's group. This issue is fixed in version 3.33.0. |
| An endpoint used during initial appliance setup did not require authentication and did not correctly enforce its intended state precondition, so during the initial activation window an unauthenticated network attacker could repeatedly re-trigger the privileged activation process. This could disrupt setup and leave the appliance in an incompletely configured state. The issue is only reachable while an appliance is being activated for the first time and not yet fully configured. |
| ngx_cache_purge before 3.0.4 can allow file deletion via a symlink attack in certain situations where nginx and a served application (e.g., WordPress) run under the same user account. The attacker must be able to create a symlink inside the cache path. Version 3.0.4 fixes this for the case of a symlink created at an arbitrary earlier time, but does not resolve an applicable TOCTOU race condition. (The ngx_cache_purge module follows symlinks while walking the cache directory tree during purge operations. The module relies on nginx's ngx_walk_tree(), which relies on stat() and therefore follows symlinks.) |
| Telegram-Stremio through 5.1.0 contains a broken object-level authorization vulnerability that allows authenticated token holders to access arbitrary chat messages by forging unsigned, unauthenticated stream IDs decoded via encode_string/decode_string functions. Attackers can craft or enumerate sequential msg_id values and set a global flag in the stream_handler endpoint to route requests through the operator's personal Userbot account, exposing private channels, groups, and Saved Messages, while the unauthenticated thumb_handler endpoint further discloses thumbnails from those same chats without any token validation. |
| A flaw was found in KubeVirt's safepath package used by virt-handler. The OpenAtNoFollow function uses O_PATH|O_NOFOLLOW to obtain a file descriptor to a path leaf, but downstream operations resolve the path via /proc/self/fd/N using link-following syscalls. When the leaf is a symlink, the kernel dereferences it, defeating the intended no-follow protection. An attacker with access to a virt-launcher pod can exploit this to redirect virt-handler's IPC socket connections, including the notify socket used for VM domain lifecycle events. By hijacking this socket, the attacker can inject arbitrary domain events into virt-handler, causing it to take incorrect lifecycle actions, corrupt VM state in the Kubernetes API, or crash — resulting in sustained denial of VM management services for all virtual machines on the affected node. Additionally, the same symlink following flaw allows virt-handler to apply file ownership or permission changes to unintended host paths. |
| A vulnerability was identified in getkirby Kirby up to 4.9.5/5.5.3. Affected by this issue is the function OptionsQuery::resolve of the file src/Option/OptionsQuery.php of the component Dynamic Option Generation. The manipulation leads to authorization bypass. The attack is possible to be carried out remotely. Upgrading to version 4.9.6 and 5.6.0 can resolve this issue. You should upgrade the affected component. |
| Temporal Server does not bind internal completion callbacks to the namespace that attached them, which allows an authenticated caller with write permission in one namespace to alter Scheduler V2 schedule state in another namespace. The callback address temporal://internal is reserved for callbacks that Scheduler V2 attaches to the Workflows it starts. In affected releases, any authenticated caller could attach a callback with that address to a Workflow start request, the address was exempt from the component.callbacks.allowedAddresses allowlist, and the History service delivered the callback to the component its token named, in whatever namespace that was, without authorizing the original caller there. When the forged completion matches an action a target schedule is running, the schedule records the action as completed while its Workflow still runs, which can defeat an overlap policy such as SKIP, and passes caller-controlled data to the next scheduled Workflow as its last completion result. A forged failure may also pause a schedule configured to pause on failure. A forgery requires the target namespace identifier, the schedule identifier, and the identity and timing of a running action. No disclosure of Workflow payloads or history was identified. Only namespaces that hold Scheduler V2 schedules can be targeted; Scheduler V2 is off by default, and existing Scheduler V2 schedules remain targets after the settings that create them are turned off. |
| TDuck survey form through 6.0 contains an insecure direct object reference vulnerability that allows authenticated users to delete other users' form submissions by supplying arbitrary submission ids. Attackers can place their own formKey in the path and iterate sequential submission ids in the request body to permanently delete submissions platform-wide. |
| SmarterMail before build 9777 contains a privilege escalation vulnerability where JWT access and refresh tokens embed a role claim at issuance that is not revalidated against the account's current role when redeemed through POST /api/v1/auth/refresh-token. Attackers who capture a refresh token issued before an administrator demotion, or a demoted user whose session was not actively polling at the time of demotion, can replay the stale token to obtain a new access token retaining the higher-privilege role (such as DomainAdmin or SysAdmin) until natural token expiry. |
| MoguBlog through 6.2 contains a broken access control vulnerability that allows authenticated administrators to move or rename other administrators' network-disk files by supplying their file paths. Attackers can send crafted requests to POST /networkDisk/moveFile, batchMoveFile, or edit, which update rows without admin_uid checks, relocating or renaming other users' files and folders. |
| MoguBlog through 6.2 contains an insecure direct object reference vulnerability that allows authenticated administrators to delete other administrators' files via POST /networkDisk/deleteFile and batchDeleteFile. Attackers can supply another administrator's file or folder uid, which NetworkDiskServiceImpl.deleteFile never checks against admin_uid, removing stored objects from local storage, Qiniu or MinIO. |
