Export limit exceeded: 424950 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 29286 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (29286 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-11947 | 1 Bftpd | 1 Bftpd | 2026-04-15 | 4.5 Medium |
| A weakness has been identified in bftpd up to 6.2. Impacted is the function expand_groups of the file options.c of the component Configuration File Handler. Executing a manipulation can lead to heap-based buffer overflow. It is possible to launch the attack on the local host. Attacks of this nature are highly complex. The exploitability is considered difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-5942 | 1 Netskope | 1 Netskope | 2026-04-15 | N/A |
| Netskope was notified about a potential gap in its agent (NS Client) on Windows systems. If this gap is successfully exploited, an unprivileged user can trigger a heap overflow in the epdlpdrv.sys driver, leading to a Blue-Screen-of-Death (BSOD). Successful exploitation can also potentially be performed by an unprivileged user whose NS Client is configured to use Endpoint DLP. A successful exploit can result in a denial-of-service for the local machine. | ||||
| CVE-2025-54070 | 1 Openzeppelin | 1 Openzeppelin Contracts | 2026-04-15 | N/A |
| OpenZeppelin Contracts is a library for secure smart contract development. Starting in version 5.2.0 and prior to version 5.4.0, the `lastIndexOf(bytes,byte,uint256)` function of the `Bytes.sol` library may access uninitialized memory when the following two conditions hold: 1) the provided buffer length is empty (i.e. `buffer.length == 0`) and position is not `2**256 - 1` (i.e. `pos != type(uint256).max`). The `pos` argument could be used to access arbitrary data outside of the buffer bounds. This could lead to the operation running out of gas, or returning an invalid index (outside of the empty buffer). Processing this invalid result for accessing the `buffer` would cause a revert under normal conditions. When triggered, the function reads memory at offset `buffer + 0x20 + pos`. If memory at that location (outside the `buffer`) matches the search pattern, the function would return an out of bound index instead of the expected `type(uint256).max`. This creates unexpected behavior where callers receive a valid-looking index pointing outside buffer bounds. Subsequent memory accesses that don't check bounds and use the returned index must carefully review the potential impact depending on their setup. Code relying on this function returning `type(uint256).max` for empty buffers or using the returned index without bounds checking could exhibit undefined behavior. Users should upgrade to version 5.4.0 to receive a patch. | ||||
| CVE-2013-10064 | 1 Actfax | 1 Actfax | 2026-04-15 | N/A |
| A stack-based buffer overflow vulnerability exists in ActFax Server version 5.01. The server's RAW protocol interface fails to safely process user-supplied data in @F506 fax header fields due to insecure usage of strcpy. Remote attackers can exploit this vulnerability by sending specially crafted @F506 fields, potentially leading to arbitrary code execution. Successful exploitation requires network access to TCP port 4559 and does not require authentication. | ||||
| CVE-2025-53022 | 1 Trustedfirmware | 1 Trusted Firmware-m | 2026-04-15 | 8.6 High |
| TrustedFirmware-M (aka Trusted Firmware for M profile Arm CPUs) before 2.1.3 and 2.2.x before 2.2.1 lacks length validation during a firmware upgrade. While processing a new image, the Firmware Upgrade (FWU) module does not validate the length field of the Type-Length-Value (TLV) structure for dependent components against the maximum allowed size. If the length specified in the TLV exceeds the size of the buffer allocated on the stack, the FWU module will overwrite the buffer (and potentially other stack data) with the TLV's value content. An attacker could exploit this by crafting a malicious TLV entry in the unprotected section of the MCUBoot upgrade image. By setting the length field to exceed the expected structure size, the attacker can manipulate the stack memory of the system during the upgrade process. | ||||
| CVE-2024-40083 | 1 Viloliving | 1 Vilo 5 Mesh Wifi System Firmware | 2026-04-15 | 9.6 Critical |
| A Buffer Overflow vulnerabilty in the local_app_set_router_token function of Vilo 5 Mesh WiFi System <= 5.16.1.33 allows remote, unauthenticated attackers to execute arbitrary code via sscanf reading the token and timezone JSON fields into a fixed-length buffer. | ||||
| CVE-2024-48290 | 1 Realtek | 1 Rtl8762ekf-evb Firmware | 2026-04-15 | 4.3 Medium |
| An issue in the Bluetooth Low Energy implementation of Realtek RTL8762E BLE SDK v1.4.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted ll_terminate_ind packet. | ||||
| CVE-2024-48289 | 2026-04-15 | 6.5 Medium | ||
| An issue in the Bluetooth Low Energy implementation of Cypress Bluetooth SDK v3.66 allows attackers to cause a Denial of Service (DoS) via supplying a crafted LL_PAUSE_ENC_REQ packet. | ||||
| CVE-2024-48075 | 1 Realtimelogic | 1 Sharkssl | 2026-04-15 | 5.3 Medium |
| A Heap buffer overflow in the server-site handshake implementation in Real Time Logic SharkSSL from 09/09/24 and earlier allows a remote attacker to trigger a Denial-of-Service via a malformed TLS Client Key Exchange message. | ||||
| CVE-2024-48456 | 2026-04-15 | 7.5 High | ||
| An issue in Netis Wifi6 Router NX10 2.0.1.3643 and 2.0.1.3582 and Netis Wifi 11AC Router NC65 3.0.0.3749 and Netis Wifi 11AC Router NC63 3.0.0.3327 and 3.0.0.3503 and Netis Wifi 11AC Router NC21 3.0.0.3800, 3.0.0.3500 and 3.0.0.3329 and Netis Wifi Router MW5360 1.0.1.3442 and 1.0.1.3031 allows a remote attacker to obtain sensitive information via the parameter password at the change admin password page at the router web interface. | ||||
| CVE-2024-46304 | 1 Libcoap | 1 Libcoap | 2026-04-15 | 7.5 High |
| A NULL pointer dereference in libcoap v4.3.5-rc2 and below allows a remote attacker to cause a denial of service via the coap_handle_request_put_block function in src/coap_block.c. | ||||
| CVE-2024-46215 | 1 Mercury | 1 Km08-708h Firmware | 2026-04-15 | 6.5 Medium |
| A vulnerability was discovered in KM08-708H-v1.1, There is a buffer overflow in the sub_445BDC() function within the /usr/sbin/goahead program; The strcpy function is executed without checking the length of the string, leading to a buffer overflow. | ||||
| CVE-2024-48457 | 2026-04-15 | 7.5 High | ||
| An issue in Netis Wifi6 Router NX10 2.0.1.3643 and 2.0.1.3582 and Netis Wifi 11AC Router NC65 3.0.0.3749 and Netis Wifi 11AC Router NC63 3.0.0.3327 and 3.0.0.3503 and Netis Wifi 11AC Router NC21 3.0.0.3800, 3.0.0.3500 and 3.0.0.3329 and Netis Wifi Router MW5360 1.0.1.3442 and 1.0.1.3031 allows a remote attacker to obtain sensitive information via the endpoint /cgi-bin/skk_set.cgi and binary /bin/scripts/start_wifi.sh | ||||
| CVE-2024-52799 | 1 Argoproj | 1 Argo-helm | 2026-04-15 | 8.3 High |
| Argo Workflows Chart is used to set up argo and its needed dependencies through one command. Prior to 0.44.0, the workflow-role has excessive privileges, the worst being create pods/exec, which will allow kubectl exec into any Pod in the same namespace, i.e. arbitrary code execution within those Pods. If a user can be made to run a malicious template, their whole namespace can be compromised. This affects versions of the argo-workflows Chart that use appVersion: 3.4 and above, which no longer need these permissions for the only available Executor, Emissary. It could also affect users below 3.4 depending on their choice of Executor in those versions. This only affects the Helm Chart and not the upstream manifests. This vulnerability is fixed in 0.44.0. | ||||
| CVE-2024-48851 | 1 Abb | 1 Flxeon | 2026-04-15 | 7.2 High |
| Improper Validation of Specified Type of Input vulnerability in ABB FLXEON.A remote code execution is possible due to an improper input validation. This issue affects FLXEON: through 9.3.5. | ||||
| CVE-2024-45746 | 1 Trustedfirmware | 1 Trusted Firmware-m | 2026-04-15 | 9.8 Critical |
| An issue was discovered in Trusted Firmware-M through 2.1.0. User provided (and controlled) mailbox messages contain a pointer to a list of input arguments (in_vec) and output arguments (out_vec). These list pointers are never validated. Each argument list contains a buffer pointer and a buffer length field. After a PSA call, the length of the output arguments behind the unchecked pointer is updated in mailbox_direct_reply, regardless of the call result. This allows an attacker to write anywhere in the secure firmware, which can be used to take over the control flow, leading to remote code execution (RCE). | ||||
| CVE-2024-43802 | 1 Vim | 1 Vim | 2026-04-15 | 4.5 Medium |
| Vim is an improved version of the unix vi text editor. When flushing the typeahead buffer, Vim moves the current position in the typeahead buffer but does not check whether there is enough space left in the buffer to handle the next characters. So this may lead to the tb_off position within the typebuf variable to point outside of the valid buffer size, which can then later lead to a heap-buffer overflow in e.g. ins_typebuf(). Therefore, when flushing the typeahead buffer, check if there is enough space left before advancing the off position. If not, fall back to flush current typebuf contents. It's not quite clear yet, what can lead to this situation. It seems to happen when error messages occur (which will cause Vim to flush the typeahead buffer) in comnination with several long mappgins and so it may eventually move the off position out of a valid buffer size. Impact is low since it is not easily reproducible and requires to have several mappings active and run into some error condition. But when this happens, this will cause a crash. The issue has been fixed as of Vim patch v9.1.0697. Users are advised to upgrade. There are no known workarounds for this issue. | ||||
| CVE-2024-43663 | 2026-04-15 | 9.8 Critical | ||
| There are many buffer overflow vulnerabilities present in several CGI binaries of the charging station.This issue affects Iocharger firmware for AC model chargers beforeversion 24120701. Likelihood: High – Given the prevalence of these buffer overflows, and the clear error message of the web server, an attacker is very likely to be able to find these vulnerabilities. Impact: Low – Usually, overflowing one of these buffers just causes a segmentation fault of the CGI binary, which causes the web server to return a 502 Bad Gateway error. However the webserver itself is not affected, and no DoS can be achieved. Abusing these buffer overflows in a meaningful way requires highly technical knowledge, especially since ASLR also seems to be enabled on the charging station. However, a skilled attacker might be able to use one of these buffer overflows to obtain remote code execution. CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). The attack has a small impact on the availability of the device (VC:N/VI:N/VA:L). There is no impact on subsequent systems. (SC:N/SI:N/SA:N). While this device is an EV charger handing significant amounts of power, we do not expect this vulnerability to have a safety impact. The attack can be automated (AU:Y). | ||||
| CVE-2024-43661 | 2026-04-15 | 9.8 Critical | ||
| The <redacted>.so library, which is used by <redacted>, is vulnerable to a buffer overflow in the code that handles the deletion of certificates. This buffer overflow can be triggered by providing a long file path to the <redacted> action of the <redacted>.exe CGI binary or to the <redacted>.sh CGI script. This binary or script will write this file path to <redacted>, which is then read by <redacted>.so This issue affects Iocharger firmware for AC models before version 24120701. Likelihood: Moderate – An attacker will have to find this exploit by either obtaining the binaries involved in this vulnerability, or by trial and error. Furthermore, the attacker will need a (low privilege) account to gain access to the <redacted>.exe CGI binary or <redacted>.sh script to trigger the vulnerability, or convince a user with such access send an HTTP request that triggers it. Impact: High – The <redacted> process, which we assume is responsible for OCPP communication, will keep crashing after performing the exploit. This happens because the buffer overflow causes the process to segfault before <redacted> is removed. This means that, even though <redacted> is automatically restarted, it will crash again as soon as it tries to parse the text file. CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). The attack leads to reducred availability of the device (VC:N/VI:N/VA:H). THere is not impact on subsequent systems. (SC:N/SI:N/SA:N). Alltough this device is an EV charger handing significant amounts of power, we do not forsee a safety impact. The attack can be automated (AU:Y). Because the DoS condition is written to disk persistantly, it cannot be recovered by the user (R:I). | ||||
| CVE-2024-48869 | 2026-04-15 | 6.1 Medium | ||
| Improper restriction of software interfaces to hardware features for some Intel(R) Xeon(R) 6 processor with E-cores when using Intel(R) Trust Domain Extensions (Intel(R) TDX) or Intel(R) Software Guard Extensions (Intel(R) SGX) may allow a privileged user to potentially enable escalation of privilege via local access. | ||||