Export limit exceeded: 15950 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15950 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64268 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: bound Read Response placement to the RREAD length In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connected siw peer that answers an outstanding RREAD with Read Response segments that keep the DDP Last flag clear, carrying more total payload than the RREAD requested, drives wqe->processed past the validated sink buffer; the next siw_rx_data() call writes out of bounds at sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP, so the peer is the remote end of an established RDMA connection and needs no local privilege. Bound every segment before placement, exactly as siw_proc_send() and siw_proc_write() already do for their tagged and untagged paths, and terminate the connection with a base-or-bounds DDP error when the Read Response would overrun the sink buffer. This is the second receive-path length fix for this file. A separate change rejects an MPA FPDU length that underflows the per-fragment remainder in the header decode; that guard does not cover this case, because here each individual segment length is self-consistent and only the accumulated placement offset overruns the buffer. | ||||
| CVE-2026-64191 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: stub: Reject I2C block transfers with invalid length The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0] as the transfer length. The existing check only clamps it to avoid overrunning the chip->words[256] register array, but does not validate it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union i2c_smbus_data.block buffer (34 bytes total). The driver is a development/test tool (CONFIG_I2C_STUB=m, not built by default) that must be loaded with a chip_addr= parameter. A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing stub_xfer() to read or write past the end of the union i2c_smbus_data.block buffer: BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223) Read of size 1 at addr ffff88800abcfd92 by task exploit/81 Call Trace: <TASK> stub_xfer (drivers/i2c/i2c-stub.c:223) __i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593) i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536) i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391) i2cdev_ioctl (drivers/i2c/i2c-dev.c:478) __x64_sys_ioctl (fs/ioctl.c:583) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> The bug exists because i2c-stub implements .smbus_xfer directly, bypassing the I2C_SMBUS_BLOCK_MAX validation in i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same function correctly validates against I2C_SMBUS_BLOCK_MAX, but the I2C_SMBUS_I2C_BLOCK_DATA case does not. Fix by rejecting transfers with data->block[0] == 0 or data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with both the I2C_SMBUS_BLOCK_DATA case in the same function and the I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated(). | ||||
| CVE-2026-64115 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: fix UAF when peer resets connection during handshake vmci_transport_recv_connecting_server() returned err = 0 for a peer RST in its default switch arm: err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL; That made vmci_transport_recv_listen() skip vsock_remove_pending(), leaving the pending socket on the listener's pending_links with sk_state = TCP_CLOSE while destroy: still dropped the explicit reference taken before schedule_delayed_work(). One second later vsock_pending_work() observed is_pending=true and performed full cleanup: vsock_remove_pending() then the two trailing sock_put(sk) calls -- the first reached refcount 0 and __sk_freed the socket, and the second wrote into the freed object: BUG: KASAN: slab-use-after-free in refcount_warn_saturate Write of size 4 at addr ffff88800b1cac80 by task kworker Workqueue: events vsock_pending_work Treat peer RST like any other unexpected packet type (err = -EINVAL). All destroy: arms now return err < 0, so vmci_transport_recv_listen() removes pending from pending_links synchronously and vsock_pending_work() takes the is_pending=false / !rejected branch, dropping only its own work reference. This also closes the multi-packet race Sashiko reported on v2: pending is removed from the list before any subsequent packet can find it. The pre-existing sk_acceptq_removed() gap on the err < 0 path of vmci_transport_recv_listen() that Sashiko also noted is not introduced or changed by this patch. Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched. | ||||
| CVE-2026-64097 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Validate GPIO pin LUT table size before iterating [Why&How] The GPIO pin table parsers in get_gpio_i2c_info() and bios_parser_get_gpio_pin_info() derive an element count from the VBIOS table_header.structuresize field, then iterate over gpio_pin[] entries. However, GET_IMAGE() only validates that the table header itself fits within the BIOS image. If the VBIOS reports a structuresize larger than the actual mapped data, the loop reads past the end of the BIOS image, causing an out-of-bounds read. Fix this by calling bios_get_image() to validate that the full claimed structuresize is accessible within the BIOS image before entering the loop in both functions. (cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3) | ||||
| CVE-2026-64036 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/rstat: validate cpu before css_rstat_cpu() access css_rstat_updated() is exposed as a BPF kfunc and accepts a caller-provided cpu argument. The function uses cpu for per-cpu rstat lookups without checking whether it refers to a valid possible CPU. A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu == 0x7fffffff triggers: UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9 index 2147483647 is out of range for type 'long unsigned int [64]' Call Trace: css_rstat_updated bpf_iter_run_prog cgroup_iter_seq_show bpf_seq_read Add cpu validation to the BPF-facing css_rstat_updated() kfunc and move the common implementation to __css_rstat_updated() for in-kernel callers. | ||||
| CVE-2026-64026 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg This improves the fix for CVE-2026-43500. Fix the pagecache corruption from in-place decryption of a DATA packet transmitted locally by splice() by getting rid of the packet sharing in the I/O thread and unconditionally extracting the packet content into a bounce buffer in which the buffer is decrypted. recvmsg() (or the kernel equivalent) then copies the data from the bounce buffer to the destination buffer. The sk_buff then remains unmodified. This has an additional advantage in that the packet is then arranged in the buffer with the correct alignment required for the crypto algorithms to process directly. The performance of the crypto does seem to be a little faster and, surprisingly, the unencrypted performance doesn't seem to change much - possibly due to removing complexity from the I/O thread. Yet another advantage is that the I/O thread doesn't have to copy packets which would slow down packet distribution, ACK generation, etc.. The buffer belongs to the call and is allocated initially at 2K, sufficiently large to hold a whole jumbo subpacket, but the buffer will be increased in size if needed. However, to take this work, MSG_PEEK may cause a later packet to be decrypted into the buffer, in which case the earlier one will need re-decrypting for a subsequent recvmsg(). Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so switch to using USHRT_MAX to indicate an invalid offset. Note also that I would generally prefer to replace the buffers of the current sk_buff with a new kmalloc'd buffer of the right size, ditching the old data and frags as this makes the handling of MSG_PEEK easier and removes the re-decryption issue, but this looks like quite a complicated thing to achieve. skb_morph() looks half way to what I want, but I don't want to have to allocate a new sk_buff. | ||||
| CVE-2026-64018 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: validate rx_req_idx to prevent out-of-bounds array access In mana_hwc_rx_event_handler(), rx_req_idx is derived from sge->address in DMA-coherent memory. In Confidential VMs (SEV-SNP/TDX), this memory is shared unencrypted and HW can modify WQE contents at any time. No bounds check exists on rx_req_idx, which can lead to an out-of-bounds access into reqs[]. Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before using it to index the reqs[] array. | ||||
| CVE-2026-64009 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Check for underflow in xfrm_state_mtu Leo Lin reported OOB write issue in esp component: xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned modulo-2^32 space using an attacker-influenced "header_len + authsize + net_adj" subtracted from a small "mtu" argument. A nobody user can install an IPv4 ESP tunnel SA with a large authentication key (XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc), configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a large value. When a single UDP datagram is then sent through the tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and esp_output() consumes it as a signed int via: padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached)) esp.tfclen = padto - skb->len (assigned to int) esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t when passed to memset() inside esp_output_fill_trailer(), producing a ~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as "Write of size 18446744073709551537 at addr ffff888...". Check for underflow and return 1. This causes the sendmsg attempt to fail with ENETUNREACH. | ||||
| CVE-2026-63996 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: require exact CDB reply length Malicious SFP module could respond with rpl_len longer than what cmis_cdb_process_reply() expected, leading to OOB writes. Malicious HW is a bit theoretical but some modules may just be buggy and/or the reads may occasionally get corrupted, so let's protect the kernel. The existing check protects from short replies. We need to protect from long ones, too. All callers that pass a non-zero rpl_exp_len cast the reply payload to a fixed-layout struct and read fields at fixed offsets, with no version negotiation or short-reply handling: - cmis_cdb_validate_password() - cmis_cdb_module_features_get() - cmis_fw_update_fw_mng_features_get() so let's assume that responses longer than expected do not have to be handled gracefully here. Add a warning message to make the debug easier in case my understanding is wrong... Note that page_data->length (argument of kmalloc) comes from last arg to ethtool_cmis_page_init() which is rpl_exp_len. Note2 that AIs also like to point out overflows in args->req.payload itself (which is a fixed-size 120 B buffer, on the stack), but callers should be reading structs defined by the standard, so protecting from requests for more data than max seem like defensive programming. | ||||
| CVE-2026-63995 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: cmis: validate start_cmd_payload_size from module The CMIS firmware update code reads start_cmd_payload_size from the module's FW Management Features CDB reply and uses it directly as the byte count for memcpy. The destination buffer is 112 bytes (ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious module (or corrupted response) can cause a OOB write later on in cmis_fw_update_start_download(). Let's error out. If modules that expect longer LPL writes actually exist we should revisit. struct cmis_cdb_start_fw_download_pl's definition has to move, no change there. | ||||
| CVE-2026-63987 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION nest list with an index 'i' and writes new_profile[i++] without bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES entries (5), but the Netlink nest count is entirely user-controlled. Netlink policies do not have support for constraining the number of nested entries (or number of multi-attr entries). | ||||
| CVE-2026-53002 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: remove sprintf usage Replace it with scnprintf, the buffer sizes are expected to be large enough to hold the result, no need for snprintf+overflow check. Increase buffer size in mangle_content_len() while at it. BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270 Write of size 1 at addr [..] vsnprintf+0xea5/0x1270 sprintf+0xb1/0xe0 mangle_content_len+0x1ac/0x280 nf_nat_sdp_session+0x1cc/0x240 process_sdp+0x8f8/0xb80 process_invite_request+0x108/0x2b0 process_sip_msg+0x5da/0xf50 sip_help_tcp+0x45e/0x780 nf_confirm+0x34d/0x990 [..] | ||||
| CVE-2026-46195 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: validate dacloffset before building DACL pointers parse_sec_desc(), build_sec_desc(), and the chown path in id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd before proving a DACL header fits inside the returned security descriptor. On 32-bit builds a malicious server can return dacloffset near U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip past the later pointer-based bounds checks. build_sec_desc() and id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped pointer in the chmod/chown rewrite paths. Validate dacloffset numerically before building any DACL pointer and reuse the same helper at the three DACL entry points. | ||||
| CVE-2026-46173 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exit: prevent preemption of oopsing TASK_DEAD task When an already-exiting task oopses, make_task_dead() currently calls do_task_dead() with preemption enabled. That is forbidden: do_task_dead() calls __schedule(), which has a comment saying "WARNING: must be called with preemption disabled!". If an oopsing task is preempted in do_task_dead(), between becoming TASK_DEAD and entering the scheduler explicitly, bad things happen: finish_task_switch() assumes that once the scheduler has switched away from a TASK_DEAD task, the task can never run again and its stack is no longer needed; but that assumption apparently doesn't hold if the dead task was preempted (the SM_PREEMPT case). This means that the scheduler ends up repeatedly dropping references on the dead task's stack, which can lead to use-after-free or double-free of the entire task stack; in other words, two tasks can end up running on the same stack, resulting in various kinds of memory corruption. (This does not just affect "recursively oopsing" tasks; it is enough to oops once during task exit, for example in a file_operations::release handler) | ||||
| CVE-2026-46145 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Validate rx_hash_key_len Sashiko points out that rx_hash_key_len comes from a uAPI structure and is blindly passed to memcpy, allowing the userspace to trash kernel memory. Bounds check it so the memcpy cannot overflow. | ||||
| CVE-2026-46070 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: validate payload size before accessing journal metadata r5c_recovery_analyze_meta_block() and r5l_recovery_verify_data_checksum_for_mb() iterate over payloads in a journal metadata block using on-disk payload size fields without validating them against the remaining space in the metadata block. A corrupted journal contains payload sizes extending beyond the PAGE_SIZE boundary can cause out-of-bounds reads when accessing payload fields or computing offsets. Add bounds validation for each payload type to ensure the full payload fits within meta_size before processing. | ||||
| CVE-2026-45991 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: udf: fix partition descriptor append bookkeeping Mounting a crafted UDF image with repeated partition descriptors can trigger a heap out-of-bounds write in part_descs_loc[]. handle_partition_descriptor() deduplicates entries by partition number, but appended slots never record partnum. As a result duplicate Partition Descriptors are appended repeatedly and num_part_descs keeps growing. Once the table is full, the growth path still sizes the allocation from partnum even though inserts are indexed by num_part_descs. If partnum is already aligned to PART_DESC_ALLOC_STEP, ALIGN(partnum, step) can keep the old capacity and the next append writes past the end of the table. Store partnum in the appended slot and size growth from the next append count so deduplication and capacity tracking follow the same model. | ||||
| CVE-2026-43501 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: reserve mac_len headroom when recompressed SRH grows ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps the next segment into ipv6_hdr->daddr, recompresses, then pulls the old header and pushes the new one plus the IPv6 header back. The recompressed header can be larger than the received one when the swap reduces the common-prefix length the segments share with daddr (CmprI=0, CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes). pskb_expand_head() was gated on segments_left == 0, so on earlier segments the push consumed unchecked headroom. Once skb_push() leaves fewer than skb->mac_len bytes in front of data, skb_mac_header_rebuild()'s call to: skb_set_mac_header(skb, -skb->mac_len); will store (data - head) - mac_len into the u16 mac_header field, which wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB past skb->head. A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv. Fix this by expanding the head whenever the remaining room is less than the push size plus mac_len, and request that much extra so the rebuilt MAC header fits afterwards. | ||||
| CVE-2026-43362 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix in-place encryption corruption in SMB2_write() SMB2_write() places write payload in iov[1..n] as part of rq_iov. smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message() encrypts iov[1] in-place, replacing the original plaintext with ciphertext. On a replayable error, the retry sends the same iov[1] which now contains ciphertext instead of the original data, resulting in corruption. The corruption is most likely to be observed when connections are unstable, as reconnects trigger write retries that re-send the already-encrypted data. This affects SFU mknod, MF symlinks, etc. On kernels before 6.10 (prior to the netfs conversion), sync writes also used this path and were similarly affected. The async write path wasn't unaffected as it uses rq_iter which gets deep-copied. Fix by moving the write payload into rq_iter via iov_iter_kvec(), so smb3_init_transform_rq() deep-copies it before encryption. | ||||
| CVE-2026-43279 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Add sanity check for OOB writes at silencing At silencing the playback URB packets in the implicit fb mode before the actual playback, we blindly assume that the received packets fit with the buffer size. But when the setup in the capture stream differs from the playback stream (e.g. due to the USB core limitation of max packet size), such an inconsistency may lead to OOB writes to the buffer, resulting in a crash. For addressing it, add a sanity check of the transfer buffer size at prepare_silent_urb(), and stop the data copy if the received data overflows. Also, report back the transfer error properly from there, too. Note that this doesn't fix the root cause of the playback error itself, but this merely covers the kernel Oops. | ||||