Export limit exceeded: 110930 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (110930 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-39855 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL access of tx->in_use in ice_ptp_ts_irq The E810 device has support for a "low latency" firmware interface to access and read the Tx timestamps. This interface does not use the standard Tx timestamp logic, due to the latency overhead of proxying sideband command requests over the firmware AdminQ. The logic still makes use of the Tx timestamp tracking structure, ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx timestamps complete. Unfortunately, the ice_ptp_ts_irq() function does not check if the tracker is initialized before its first access. This results in NULL dereference or use-after-free bugs similar to the following: [245977.278756] BUG: kernel NULL pointer dereference, address: 0000000000000000 [245977.278774] RIP: 0010:_find_first_bit+0x19/0x40 [245977.278796] Call Trace: [245977.278809] ? ice_misc_intr+0x364/0x380 [ice] This can occur if a Tx timestamp interrupt races with the driver reset logic. Fix this by only checking the in_use bitmap (and other fields) if the tracker is marked as initialized. The reset flow will clear the init field under lock before it tears the tracker down, thus preventing any use-after-free or NULL access. | ||||
| CVE-2025-39798 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Fix the setting of capabilities when automounting a new filesystem Capabilities cannot be inherited when we cross into a new filesystem. They need to be reset to the minimal defaults, and then probed for again. | ||||
| CVE-2025-39683 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Limit access to parser->buffer when trace_get_user failed When the length of the string written to set_ftrace_filter exceeds FTRACE_BUFF_MAX, the following KASAN alarm will be triggered: BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0 Read of size 1 at addr ffff0000d00bd5ba by task ash/165 CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x34/0x50 (C) dump_stack_lvl+0xa0/0x158 print_address_description.constprop.0+0x88/0x398 print_report+0xb0/0x280 kasan_report+0xa4/0xf0 __asan_report_load1_noabort+0x20/0x30 strsep+0x18c/0x1b0 ftrace_process_regex.isra.0+0x100/0x2d8 ftrace_regex_release+0x484/0x618 __fput+0x364/0xa58 ____fput+0x28/0x40 task_work_run+0x154/0x278 do_notify_resume+0x1f0/0x220 el0_svc+0xec/0xf0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 The reason is that trace_get_user will fail when processing a string longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0. Then an OOB access will be triggered in ftrace_regex_release-> ftrace_process_regex->strsep->strpbrk. We can solve this problem by limiting access to parser->buffer when trace_get_user failed. | ||||
| CVE-2025-39689 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Also allocate and copy hash for reading of filter files Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds the pointer to the global tracer hash to its iterator. Unlike the writer that allocates a copy of the hash, the reader keeps the pointer to the filter hashes. This is problematic because this pointer is static across function calls that release the locks that can update the global tracer hashes. This can cause UAF and similar bugs. Allocate and copy the hash for reading the filter files like it is done for the writers. This not only fixes UAF bugs, but also makes the code a bit simpler as it doesn't have to differentiate when to free the iterator's hash between writers and readers. | ||||
| CVE-2025-40129 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix null pointer dereference on zero-length checksum In xdr_stream_decode_opaque_auth(), zero-length checksum.len causes checksum.data to be set to NULL. This triggers a NPD when accessing checksum.data in gss_krb5_verify_mic_v2(). This patch ensures that the value of checksum.len is not less than XDR_UNIT. | ||||
| CVE-2025-40159 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: Harden userspace-supplied xdp_desc validation Turned out certain clearly invalid values passed in xdp_desc from userspace can pass xp_{,un}aligned_validate_desc() and then lead to UBs or just invalid frames to be queued for xmit. desc->len close to ``U32_MAX`` with a non-zero pool->tx_metadata_len can cause positive integer overflow and wraparound, the same way low enough desc->addr with a non-zero pool->tx_metadata_len can cause negative integer overflow. Both scenarios can then pass the validation successfully. This doesn't happen with valid XSk applications, but can be used to perform attacks. Always promote desc->len to ``u64`` first to exclude positive overflows of it. Use explicit check_{add,sub}_overflow() when validating desc->addr (which is ``u64`` already). bloat-o-meter reports a little growth of the code size: add/remove: 0/0 grow/shrink: 2/1 up/down: 60/-16 (44) Function old new delta xskq_cons_peek_desc 299 330 +31 xsk_tx_peek_release_desc_batch 973 1002 +29 xsk_generic_xmit 3148 3132 -16 but hopefully this doesn't hurt the performance much. | ||||
| CVE-2025-40061 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix race in do_task() when draining When do_task() exhausts its iteration budget (!ret), it sets the state to TASK_STATE_IDLE to reschedule, without a secondary check on the current task->state. This can overwrite the TASK_STATE_DRAINING state set by a concurrent call to rxe_cleanup_task() or rxe_disable_task(). While state changes are protected by a spinlock, both rxe_cleanup_task() and rxe_disable_task() release the lock while waiting for the task to finish draining in the while(!is_done(task)) loop. The race occurs if do_task() hits its iteration limit and acquires the lock in this window. The cleanup logic may then proceed while the task incorrectly reschedules itself, leading to a potential use-after-free. This bug was introduced during the migration from tasklets to workqueues, where the special handling for the draining case was lost. Fix this by restoring the original pre-migration behavior. If the state is TASK_STATE_DRAINING when iterations are exhausted, set cont to 1 to force a new loop iteration. This allows the task to finish its work, so that a subsequent iteration can reach the switch statement and correctly transition the state to TASK_STATE_DRAINED, stopping the task as intended. | ||||
| CVE-2025-40053 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dlink: handle copy_thresh allocation failure The driver did not handle failure of `netdev_alloc_skb_ip_align()`. If the allocation failed, dereferencing `skb->protocol` could lead to a NULL pointer dereference. This patch tries to allocate `skb`. If the allocation fails, it falls back to the normal path. Tested-on: D-Link DGE-550T Rev-A3 | ||||
| CVE-2025-40048 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Let userspace take care of interrupt mask Remove the logic to set interrupt mask by default in uio_hv_generic driver as the interrupt mask value is supposed to be controlled completely by the user space. If the mask bit gets changed by the driver, concurrently with user mode operating on the ring, the mask bit may be set when it is supposed to be clear, and the user-mode driver will miss an interrupt which will cause a hang. For eg- when the driver sets inbound ring buffer interrupt mask to 1, the host does not interrupt the guest on the UIO VMBus channel. However, setting the mask does not prevent the host from putting a message in the inbound ring buffer. So let’s assume that happens, the host puts a message into the ring buffer but does not interrupt. Subsequently, the user space code in the guest sets the inbound ring buffer interrupt mask to 0, saying “Hey, I’m ready for interrupts”. User space code then calls pread() to wait for an interrupt. Then one of two things happens: * The host never sends another message. So the pread() waits forever. * The host does send another message. But because there’s already a message in the ring buffer, it doesn’t generate an interrupt. This is the correct behavior, because the host should only send an interrupt when the inbound ring buffer transitions from empty to not-empty. Adding an additional message to a ring buffer that is not empty is not supposed to generate an interrupt on the guest. Since the guest is waiting in pread() and not removing messages from the ring buffer, the pread() waits forever. This could be easily reproduced in hv_fcopy_uio_daemon if we delay setting interrupt mask to 0. Similarly if hv_uio_channel_cb() sets the interrupt_mask to 1, there’s a race condition. Once user space empties the inbound ring buffer, but before user space sets interrupt_mask to 0, the host could put another message in the ring buffer but it wouldn’t interrupt. Then the next pread() would hang. Fix these by removing all instances where interrupt_mask is changed, while keeping the one in set_event() unchanged to enable userspace control the interrupt mask by writing 0/1 to /dev/uioX. | ||||
| CVE-2025-40018 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: Defer ip_vs_ftp unregister during netns cleanup On the netns cleanup path, __ip_vs_ftp_exit() may unregister ip_vs_ftp before connections with valid cp->app pointers are flushed, leading to a use-after-free. Fix this by introducing a global `exiting_module` flag, set to true in ip_vs_ftp_exit() before unregistering the pernet subsystem. In __ip_vs_ftp_exit(), skip ip_vs_ftp unregister if called during netns cleanup (when exiting_module is false) and defer it to __ip_vs_cleanup_batch(), which unregisters all apps after all connections are flushed. If called during module exit, unregister ip_vs_ftp immediately. | ||||
| CVE-2025-40000 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait() There is a bug observed when rtw89_core_tx_kick_off_and_wait() tries to access already freed skb_data: BUG: KFENCE: use-after-free write in rtw89_core_tx_kick_off_and_wait drivers/net/wireless/realtek/rtw89/core.c:1110 CPU: 6 UID: 0 PID: 41377 Comm: kworker/u64:24 Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS edk2-20250523-14.fc42 05/23/2025 Workqueue: events_unbound cfg80211_wiphy_work [cfg80211] Use-after-free write at 0x0000000020309d9d (in kfence-#251): rtw89_core_tx_kick_off_and_wait drivers/net/wireless/realtek/rtw89/core.c:1110 rtw89_core_scan_complete drivers/net/wireless/realtek/rtw89/core.c:5338 rtw89_hw_scan_complete_cb drivers/net/wireless/realtek/rtw89/fw.c:7979 rtw89_chanctx_proceed_cb drivers/net/wireless/realtek/rtw89/chan.c:3165 rtw89_chanctx_proceed drivers/net/wireless/realtek/rtw89/chan.h:141 rtw89_hw_scan_complete drivers/net/wireless/realtek/rtw89/fw.c:8012 rtw89_mac_c2h_scanofld_rsp drivers/net/wireless/realtek/rtw89/mac.c:5059 rtw89_fw_c2h_work drivers/net/wireless/realtek/rtw89/fw.c:6758 process_one_work kernel/workqueue.c:3241 worker_thread kernel/workqueue.c:3400 kthread kernel/kthread.c:463 ret_from_fork arch/x86/kernel/process.c:154 ret_from_fork_asm arch/x86/entry/entry_64.S:258 kfence-#251: 0x0000000056e2393d-0x000000009943cb62, size=232, cache=skbuff_head_cache allocated by task 41377 on cpu 6 at 77869.159548s (0.009551s ago): __alloc_skb net/core/skbuff.c:659 __netdev_alloc_skb net/core/skbuff.c:734 ieee80211_nullfunc_get net/mac80211/tx.c:5844 rtw89_core_send_nullfunc drivers/net/wireless/realtek/rtw89/core.c:3431 rtw89_core_scan_complete drivers/net/wireless/realtek/rtw89/core.c:5338 rtw89_hw_scan_complete_cb drivers/net/wireless/realtek/rtw89/fw.c:7979 rtw89_chanctx_proceed_cb drivers/net/wireless/realtek/rtw89/chan.c:3165 rtw89_chanctx_proceed drivers/net/wireless/realtek/rtw89/chan.c:3194 rtw89_hw_scan_complete drivers/net/wireless/realtek/rtw89/fw.c:8012 rtw89_mac_c2h_scanofld_rsp drivers/net/wireless/realtek/rtw89/mac.c:5059 rtw89_fw_c2h_work drivers/net/wireless/realtek/rtw89/fw.c:6758 process_one_work kernel/workqueue.c:3241 worker_thread kernel/workqueue.c:3400 kthread kernel/kthread.c:463 ret_from_fork arch/x86/kernel/process.c:154 ret_from_fork_asm arch/x86/entry/entry_64.S:258 freed by task 1045 on cpu 9 at 77869.168393s (0.001557s ago): ieee80211_tx_status_skb net/mac80211/status.c:1117 rtw89_pci_release_txwd_skb drivers/net/wireless/realtek/rtw89/pci.c:564 rtw89_pci_release_tx_skbs.isra.0 drivers/net/wireless/realtek/rtw89/pci.c:651 rtw89_pci_release_tx drivers/net/wireless/realtek/rtw89/pci.c:676 rtw89_pci_napi_poll drivers/net/wireless/realtek/rtw89/pci.c:4238 __napi_poll net/core/dev.c:7495 net_rx_action net/core/dev.c:7557 net/core/dev.c:7684 handle_softirqs kernel/softirq.c:580 do_softirq.part.0 kernel/softirq.c:480 __local_bh_enable_ip kernel/softirq.c:407 rtw89_pci_interrupt_threadfn drivers/net/wireless/realtek/rtw89/pci.c:927 irq_thread_fn kernel/irq/manage.c:1133 irq_thread kernel/irq/manage.c:1257 kthread kernel/kthread.c:463 ret_from_fork arch/x86/kernel/process.c:154 ret_from_fork_asm arch/x86/entry/entry_64.S:258 It is a consequence of a race between the waiting and the signaling side of the completion: Waiting thread Completing thread rtw89_core_tx_kick_off_and_wait() rcu_assign_pointer(skb_data->wait, wait) /* start waiting */ wait_for_completion_timeout() rtw89_pci_tx_status() rtw89_core_tx_wait_complete() rcu_read_lock() /* signals completion and ---truncated--- | ||||
| CVE-2025-39994 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: media: tuner: xc5000: Fix use-after-free in xc5000_release The original code uses cancel_delayed_work() in xc5000_release(), which does not guarantee that the delayed work item timer_sleep has fully completed if it was already running. This leads to use-after-free scenarios where xc5000_release() may free the xc5000_priv while timer_sleep is still active and attempts to dereference the xc5000_priv. A typical race condition is illustrated below: CPU 0 (release thread) | CPU 1 (delayed work callback) xc5000_release() | xc5000_do_timer_sleep() cancel_delayed_work() | hybrid_tuner_release_state(priv) | kfree(priv) | | priv = container_of() // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the timer_sleep is properly canceled before the xc5000_priv memory is deallocated. A deadlock concern was considered: xc5000_release() is called in a process context and is not holding any locks that the timer_sleep work item might also need. Therefore, the use of the _sync() variant is safe here. This bug was initially identified through static analysis. [hverkuil: fix typo in Subject: tunner -> tuner] | ||||
| CVE-2025-40173 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/ip6_tunnel: Prevent perpetual tunnel growth Similarly to ipv4 tunnel, ipv6 version updates dev->needed_headroom, too. While ipv4 tunnel headroom adjustment growth was limited in commit 5ae1e9922bbd ("net: ip_tunnel: prevent perpetual headroom growth"), ipv6 tunnel yet increases the headroom without any ceiling. Reflect ipv4 tunnel headroom adjustment limit on ipv6 version. Credits to Francesco Ruggeri, who was originally debugging this issue and wrote local Arista-specific patch and a reproducer. | ||||
| CVE-2025-40183 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6} Cilium has a BPF egress gateway feature which forces outgoing K8s Pod traffic to pass through dedicated egress gateways which then SNAT the traffic in order to interact with stable IPs outside the cluster. The traffic is directed to the gateway via vxlan tunnel in collect md mode. A recent BPF change utilized the bpf_redirect_neigh() helper to forward packets after the arrival and decap on vxlan, which turned out over time that the kmalloc-256 slab usage in kernel was ever-increasing. The issue was that vxlan allocates the metadata_dst object and attaches it through a fake dst entry to the skb. The latter was never released though given bpf_redirect_neigh() was merely setting the new dst entry via skb_dst_set() without dropping an existing one first. | ||||
| CVE-2025-39973 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i40e: add validation for ring_len param The `ring_len` parameter provided by the virtual function (VF) is assigned directly to the hardware memory context (HMC) without any validation. To address this, introduce an upper boundary check for both Tx and Rx queue lengths. The maximum number of descriptors supported by the hardware is 8k-32. Additionally, enforce alignment constraints: Tx rings must be a multiple of 8, and Rx rings must be a multiple of 32. | ||||
| CVE-2025-40198 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid potential buffer over-read in parse_apply_sb_mount_options() Unlike other strings in the ext4 superblock, we rely on tune2fs to make sure s_mount_opts is NUL terminated. Harden parse_apply_sb_mount_options() by treating s_mount_opts as a potential __nonstring. | ||||
| CVE-2025-39969 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i40e: fix validation of VF state in get resources VF state I40E_VF_STATE_ACTIVE is not the only state in which VF is actually active so it should not be used to determine if a VF is allowed to obtain resources. Use I40E_VF_STATE_RESOURCES_LOADED that is set only in i40e_vc_get_vf_resources_msg() and cleared during reset. | ||||
| CVE-2025-39963 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix incorrect io_kiocb reference in io_link_skb In io_link_skb function, there is a bug where prev_notif is incorrectly assigned using 'nd' instead of 'prev_nd'. This causes the context validation check to compare the current notification with itself instead of comparing it with the previous notification. Fix by using the correct prev_nd parameter when obtaining prev_notif. | ||||
| CVE-2025-39957 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: increase scan_ies_len for S1G Currently the S1G capability element is not taken into account for the scan_ies_len, which leads to a buffer length validation failure in ieee80211_prep_hw_scan() and subsequent WARN in __ieee80211_start_scan(). This prevents hw scanning from functioning. To fix ensure we accommodate for the S1G capability length. | ||||
| CVE-2025-39929 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path During tests of another unrelated patch I was able to trigger this error: Objects remaining on __kmem_cache_shutdown() | ||||